arXiv Science⌕ Search

arXiv subjects

Ye Wang

Publications and source records attributed to Ye Wang.

At least 307 records · Page 17Linked to original sources

Double-EIT Ground-State Cooling of Stationary Two-Dimensional Ion Lattices

We theoretically and experimentally investigate double electromagnetically induced transparency (double-EIT) cooling of two-dimensional ion crystals confined in a Paul trap. The double-EIT ground-state cooling is observed for \Yb ions with clock state, for which EIT cooling has not been realized like many other ions with a simple $Λ$-scheme. A cooling rate of $\dot{\bar n}=34~(\pm1.8)~\rm{ms}^{-1}$ and a cooling limit of $\bar n=0.06~(\pm 0.059)$ are observed for a single ion. The measured cooling rate and limit are consistent with theoretical predictions. We apply double-EIT cooling to the transverse modes of two-dimensional (2D) crystals with up to 12 ions. In our 2D crystals, the micromotion and the transverse mode directions are perpendicular, which makes them decoupled. Therefore, the cooling on transverse modes is not disturbed by micromotion, which is confirmed in our experiment. For the center of mass mode of a 12 ions crystal, we observe a cooling rate and a cooling limit that are consistent with those of a single ion, including heating rates proportional to the number of ions. This method can be extended to other hyperfine qubits, and near ground-state cooling of stationary 2D crystals with large numbers of ions may advance the field of quantum information sciences.

quant-ph↗

Minimizing Pumping Energy Cost in Real-time Operations of Water Distribution Systems using Economic Model Predictive Control

Optimizing pump operations is a challenging task for real-time management of water distribution systems (WDSs). With suitable pump scheduling, pumping costs can be significantly reduced. In this research, a novel economic model predictive control (EMPC) framework for real-time management of WDSs is proposed. Optimal pump operations are selected based on predicted system behavior over a receding time horizon with the aim to minimize the total pumping energy cost. Time-varying electricity tariffs are considered while all the required water demands are satisfied. The novelty of this framework is to choose the number of pumps to operate in each pump station as decision variables in order to optimize the total pumping energy costs. By using integer programming, the proposed EMPC is applied to a benchmark case study, the Richmond Pruned network. The simulation with an EPANET hydraulic simulator is implemented. Moreover, a comparison of the results obtained using the proposed EMPC with those obtained using trigger-level control demonstrates significant economic benefits of the proposed EMPC.

eess.SY↗

Query-by-Sketch: Scaling Shortest Path Graph Queries on Very Large Networks

Computing shortest paths is a fundamental operation in processing graph data. In many real-world applications, discovering shortest paths between two vertices empowers us to make full use of the underlying structure to understand how vertices are related in a graph, e.g. the strength of social ties between individuals in a social network. In this paper, we study the shortest-path-graph problem that aims to efficiently compute a shortest path graph containing exactly all shortest paths between any arbitrary pair of vertices on complex networks. Our goal is to design an exact solution that can scale to graphs with millions or billions of vertices and edges. To achieve high scalability, we propose a novel method, Query-by-Sketch (QbS), which efficiently leverages offline labelling (i.e., precomputed labels) to guide online searching through a fast sketching process that summarizes the important structural aspects of shortest paths in answering shortest-path-graph queries. We theoretically prove the correctness of this method and analyze its computational complexity. To empirically verify the efficiency of QbS, we conduct experiments on 12 real-world datasets, among which the largest dataset has 1.7 billion vertices and 7.8 billion edges. The experimental results show that QbS can answer shortest-path graph queries in microseconds for million-scale graphs and less than half a second for billion-scale graphs.

cs.DB↗

RobustPointSet: A Dataset for Benchmarking Robustness of Point Cloud Classifiers

The 3D deep learning community has seen significant strides in pointcloud processing over the last few years. However, the datasets on which deep models have been trained have largely remained the same. Most datasets comprise clean, clutter-free pointclouds canonicalized for pose. Models trained on these datasets fail in uninterpretible and unintuitive ways when presented with data that contains transformations "unseen" at train time. While data augmentation enables models to be robust to "previously seen" input transformations, 1) we show that this does not work for unseen transformations during inference, and 2) data augmentation makes it difficult to analyze a model's inherent robustness to transformations. To this end, we create a publicly available dataset for robustness analysis of point cloud classification models (independent of data augmentation) to input transformations, called RobustPointSet. Our experiments indicate that despite all the progress in the point cloud classification, there is no single architecture that consistently performs better -- several fail drastically -- when evaluated on transformed test sets. We also find that robustness to unseen transformations cannot be brought about merely by extensive data augmentation. RobustPointSet can be accessed through https://github.com/AutodeskAILab/RobustPointSet.

cs.CV↗

Dynamic Texture Synthesis by Incorporating Long-range Spatial and Temporal Correlations

The main challenge of dynamic texture synthesis lies in how to maintain spatial and temporal consistency in synthesized videos. The major drawback of existing dynamic texture synthesis models comes from poor treatment of the long-range texture correlation and motion information. To address this problem, we incorporate a new loss term, called the Shifted Gram loss, to capture the structural and long-range correlation of the reference texture video. Furthermore, we introduce a frame sampling strategy to exploit long-period motion across multiple frames. With these two new techniques, the application scope of existing texture synthesis models can be extended. That is, they can synthesize not only homogeneous but also structured dynamic texture patterns. Thorough experimental results are provided to demonstrate that our proposed dynamic texture synthesis model offers state-of-the-art visual performance.

cs.CV↗

Robust distributed model predictive control of linear systems: analysis and synthesis

To provide robustness of distributed model predictive control (DMPC), this work proposes a robust DMPC formulation for discrete-time linear systems subject to unknown-but-bounded disturbances. Taking advantage of the structure of certain classes of distributed systems seen in applications with interagent coupling like vehicle platooning, a novel robust DMPC is formulated. The proposed approach is characterised by separable terminal costs and locally robust terminal sets, with the latter sets adaptively estimated in the online optimisation problem. A constraint tightening approach based on a set-membership approach is used to guarantee constraint satisfaction for coupled subsystems in the presence of disturbances. Under this formulation, the closed-loop system is shown to be recursively feasible and input-to-state stable. To aid in the deployment of the proposed robust DMPC, a possible synthesis method and design conditions for practical implementation are presented. Finally, simulation results with a mass-spring-damper system are provided to demonstrate the proposed robust DMPC.

eess.SY↗

Medical Image Segmentation with Limited Supervision: A Review of Deep Network Models

Despite the remarkable performance of deep learning methods on various tasks, most cutting-edge models rely heavily on large-scale annotated training examples, which are often unavailable for clinical and health care tasks. The labeling costs for medical images are very high, especially in medical image segmentation, which typically requires intensive pixel/voxel-wise labeling. Therefore, the strong capability of learning and generalizing from limited supervision, including a limited amount of annotations, sparse annotations, and inaccurate annotations, is crucial for the successful application of deep learning models in medical image segmentation. However, due to its intrinsic difficulty, segmentation with limited supervision is challenging and specific model design and/or learning strategies are needed. In this paper, we provide a systematic and up-to-date review of the solutions above, with summaries and comments about the methodologies. We also highlight several problems in this field, discussed future directions observing further investigations.

cs.CV↗

Protograph-Based Design for QC Polar Codes

We propose a new family of polar coding which realizes high coding gain, low complexity, and high throughput by introducing a protograph-based design. The proposed technique called as quasi-cyclic (QC) polar codes can be highly parallelized without sacrificing decoding complexity. We analyze short cycles in the protograph polar codes and develop a design method to increase the girth. Our approach can resolve the long-standing unsolved problem that belief propagation (BP) decoding does not work well for polar codes due to the inherently short cycles. We demonstrate that a high lifting factor of QC polar codes can improve the performance and that QC polar codes with BP decoding can outperform conventional polar codes with state-of-the-art list decoding. Moreover, we show that a greedy pruning method can improve the performance-complexity trade-off.

cs.IT↗

AutoBayes: Automated Bayesian Graph Exploration for Nuisance-Robust Inference

Learning data representations that capture task-related features, but are invariant to nuisance variations remains a key challenge in machine learning. We introduce an automated Bayesian inference framework, called AutoBayes, that explores different graphical models linking classifier, encoder, decoder, estimator and adversarial network blocks to optimize nuisance-invariant machine learning pipelines. AutoBayes also enables learning disentangled representations, where the latent variable is split into multiple pieces to impose various relationships with the nuisance variation and task labels. We benchmark the framework on several public datasets, and provide analysis of its capability for subject-transfer learning with/without variational modeling and adversarial training. We demonstrate a significant performance improvement with ensemble learning across explored graphical models.

cs.LG↗

Real-time Distributed MPC for Multiple Underwater Vehicles with Limited Communication Data-rates

Controlling a fleet of autonomous underwater vehicles can be challenging due to low bandwidth communication between agents. This paper proposes to address this challenge by optimizing the quantization design of the communications between agents for use in distributed algorithms. The proposed approach considers two stages for the problem of multi-AUV control: an off-line stage where the quantization design is optimized; and an on-line stage based on a distributed model predictive control formulation and a distributed optimization algorithm with quantization. The standard properties of recursive feasibility and stability of the closed loop systems are analyzed, and simulations used to demonstrate the overall behaviour of the proposed approach.

eess.SY↗

THCluster: herb supplements categorization for precision traditional Chinese medicine

There has been a continuing demand for traditional and complementary medicine worldwide. A fundamental and important topic in Traditional Chinese Medicine (TCM) is to optimize the prescription and to detect herb regularities from TCM data. In this paper, we propose a novel clustering model to solve this general problem of herb categorization, a pivotal task of prescription optimization and herb regularities. The model utilizes Random Walks method, Bayesian rules and Expectation Maximization(EM) models to complete a clustering analysis effectively on a heterogeneous information network. We performed extensive experiments on the real-world datasets and compared our method with other algorithms and experts. Experimental results have demonstrated the effectiveness of the proposed model for discovering useful categorization of herbs and its potential clinical manifestations.

q-bio.QM↗

Universal Physiological Representation Learning with Soft-Disentangled Rateless Autoencoders

Human computer interaction (HCI) involves a multidisciplinary fusion of technologies, through which the control of external devices could be achieved by monitoring physiological status of users. However, physiological biosignals often vary across users and recording sessions due to unstable physical/mental conditions and task-irrelevant activities. To deal with this challenge, we propose a method of adversarial feature encoding with the concept of a Rateless Autoencoder (RAE), in order to exploit disentangled, nuisance-robust, and universal representations. We achieve a good trade-off between user-specific and task-relevant features by making use of the stochastic disentanglement of the latent representations by adopting additional adversarial networks. The proposed model is applicable to a wider range of unknown users and tasks as well as different classifiers. Results on cross-subject transfer evaluations show the advantages of the proposed framework, with up to an 11.6% improvement in the average subject-transfer classification accuracy.

eess.SP↗

Disentangled Adversarial Autoencoder for Subject-Invariant Physiological Feature Extraction

Recent developments in biosignal processing have enabled users to exploit their physiological status for manipulating devices in a reliable and safe manner. One major challenge of physiological sensing lies in the variability of biosignals across different users and tasks. To address this issue, we propose an adversarial feature extractor for transfer learning to exploit disentangled universal representations. We consider the trade-off between task-relevant features and user-discriminative information by introducing additional adversary and nuisance networks in order to manipulate the latent representations such that the learned feature extractor is applicable to unknown users and various tasks. Results on cross-subject transfer evaluations exhibit the benefits of the proposed framework, with up to 8.8% improvement in average accuracy of classification, and demonstrate adaptability to a broader range of subjects.

cs.LG↗

DeepSlicing: Deep Reinforcement Learning Assisted Resource Allocation for Network Slicing

Network slicing enables multiple virtual networks run on the same physical infrastructure to support various use cases in 5G and beyond. These use cases, however, have very diverse network resource demands, e.g., communication and computation, and various performance metrics such as latency and throughput. To effectively allocate network resources to slices, we propose DeepSlicing that integrates the alternating direction method of multipliers (ADMM) and deep reinforcement learning (DRL). DeepSlicing decomposes the network slicing problem into a master problem and several slave problems. The master problem is solved based on convex optimization and the slave problem is handled by DRL method which learns the optimal resource allocation policy. The performance of the proposed algorithm is validated through network simulations.

eess.SP↗

High-fidelity Two-qubit Gates Using a MEMS-based Beam Steering System for Individual Qubit Addressing

In a large scale trapped atomic ion quantum computer, high-fidelity two-qubit gates need to be extended over all qubits with individual control. We realize and characterize high-fidelity two-qubit gates in a system with up to 4 ions using radial modes. The ions are individually addressed by two tightly focused beams steered using micro-electromechanical system (MEMS) mirrors. We deduce a gate fidelity of 99.49(7)% in a two-ion chain and 99.30(6)% in a four-ion chain by applying a sequence of up to 21 two-qubit gates and measuring the final state fidelity. We characterize the residual errors and discuss methods to further improve the gate fidelity towards values that are compatible with fault-tolerant quantum computation.

quant-ph↗

Single ion-qubit exceeding one hour coherence time

Realizing a long coherence time quantum memory is a major challenge of current quantum technology. Here, we report a single \Yb ion-qubit memory with over one hour coherence time, an order of improvement compared to the state-of-the-art record. The long coherence time memory is realized by addressing various technical challenges such as ambient magnetic-field noise, phase noise and leakage of the microwave oscillator. Moreover, systematically study the decoherence process of our quantum memory by quantum process tomography, which enables to apply the strict criteria of quantum coherence, relative entropy of coherence. We also benchmark our quantum memory by its ability in preserving quantum information, i.e., the robustness of quantum memory, which clearly shows that over 6000 s, our quantum memory preserves non-classical quantum information. Our results verify the stability of the quantum memory in hours level and indicate its versatile applicability in various scenarios.

quant-ph↗

Deep Graph Random Process for Relational-Thinking-Based Speech Recognition

Lying at the core of human intelligence, relational thinking is characterized by initially relying on innumerable unconscious percepts pertaining to relations between new sensory signals and prior knowledge, consequently becoming a recognizable concept or object through coupling and transformation of these percepts. Such mental processes are difficult to model in real-world problems such as in conversational automatic speech recognition (ASR), as the percepts (if they are modelled as graphs indicating relationships among utterances) are supposed to be innumerable and not directly observable. In this paper, we present a Bayesian nonparametric deep learning method called deep graph random process (DGP) that can generate an infinite number of probabilistic graphs representing percepts. We further provide a closed-form solution for coupling and transformation of these percept graphs for acoustic modeling. Our approach is able to successfully infer relations among utterances without using any relational data during training. Experimental evaluations on ASR tasks including CHiME-2 and CHiME-5 demonstrate the effectiveness and benefits of our method.

cs.LG↗

Lattice PUF: A Strong Physical Unclonable Function Provably Secure against Machine Learning Attacks

We propose a strong physical unclonable function (PUF) provably secure against machine learning (ML) attacks with both classical and quantum computers. Its security is derived from cryptographic hardness of learning decryption functions of public-key cryptosystems. Our design compactly realizes the decryption function of the learning-with-errors (LWE) cryptosystem. Due to the fundamental connection of LWE to lattice problems, we call the construction the lattice PUF. Lattice PUF is constructed using a physically obfuscated key (POK), an LWE decryption function block, and a linear-feedback shift register (LFSR) as a pseudo-random number generator. The POK provides the secret key of the LWE decryption function; its stability is ensured by a fuzzy extractor (FE). To reduce the challenge size, we exploit distributional relaxations of space-efficient LWEs. That allows only a small challenge-seed to be transmitted with the full-length challenge generated by the LFSR, resulting in a 100X reduction of communication cost. To prevent an active challenge-manipulation attack, a self-incrementing counter is embedded into the challenge seed. We prototyped the lattice PUF with 2^136 challenge-response pairs (CRPs) on a Spartan 6 FPGA, which required 45 slices for the PUF logic proper and 233 slices for the FE. Simulation-based evaluation shows the mean (std) of uniformity to be 49.98% (1.58%), of uniqueness to be 50.00% (1.58%), and of reliability to be 1.26% (2.88%). The LWE concrete hardness estimator guarantees that a successful ML attack of the lattice PUF will require the infeasible 2^128 CPU operations. Several classes of empirical ML attacks, including support vector machine, logistic regression, and deep neural networks, are used: in all attacks, the prediction error remains above 49.76% after 1 million training CRPs.

cs.CR↗