arXiv subjects
Publications and source records attributed to Ye Lu.
The analyses of the LHCb data on $X(6900)$ found in di-$J/ψ$ and $J/ψψ(3686)$ systems are performed using a momentum-dependent {Flatté}-like parameterization. The use of the pole counting rule and spectral density function sum rule give consistent conclusions that $X(6900)$ may not be a molecule of $J/ψψ(3686)$. Nevertheless it is still possible that $X(6900)$ be a molecule of higher states, such as $J/ψψ(3770)$, $χ_{c0}χ_{c2}$, etc.
Deterministic computational modeling of laser powder bed fusion (LPBF) process fails to capture irregularities and roughness of the scan track, unless expensive powder-scale analysis is used. In this work we developed a stochastic computational modeling framework based on Markov Chain Monte Carlo (MCMC) capable of capturing the irregularities of LPBF scan. The model is calibrated against AFRL single track scan data using a specially designed tensor decomposition method, i.e., Higher-Order Proper Generalized Decomposition (HOPGD) that relies on non-intrusive data learning and construction of reduced order surrogate models. Once calibrated, the stochastic model can be used to predict the roughness and porosity at part scale at a significantly reduced computational cost compared to detailed powder-scale deterministic simulations. The stochastic simulation predictions are validated against AFRL multi-layer and multitrack experiments and reported as more accurate when compared with regular deterministic simulation results.
Quantization has been proven to be a vital method for improving the inference efficiency of deep neural networks (DNNs). However, it is still challenging to strike a good balance between accuracy and efficiency while quantizing DNN weights or activation values from high-precision formats to their quantized counterparts. We propose a new method called elastic significant bit quantization (ESB) that controls the number of significant bits of quantized values to obtain better inference accuracy with fewer resources. We design a unified mathematical formula to constrain the quantized values of the ESB with a flexible number of significant bits. We also introduce a distribution difference aligner (DDA) to quantitatively align the distributions between the full-precision weight or activation values and quantized values. Consequently, ESB is suitable for various bell-shaped distributions of weights and activation of DNNs, thus maintaining a high inference accuracy. Benefitting from fewer significant bits of quantized values, ESB can reduce the multiplication complexity. We implement ESB as an accelerator and quantitatively evaluate its efficiency on FPGAs. Extensive experimental results illustrate that ESB quantization consistently outperforms state-of-the-art methods and achieves average accuracy improvements of 4.78%, 1.92%, and 3.56% over AlexNet, ResNet18, and MobileNetV2, respectively. Furthermore, ESB as an accelerator can achieve 10.95 GOPS peak performance of 1k LUTs without DSPs on the Xilinx ZCU102 FPGA platform. Compared with CPU, GPU, and state-of-the-art accelerators on FPGAs, the ESB accelerator can improve the energy efficiency by up to 65x, 11x, and 26x, respectively.
In recent years, the growing demand for more intelligent service robots is pushing the development of mobile robot navigation algorithms to allow safe and efficient operation in a dense crowd. Reinforcement learning (RL) approaches have shown superior ability in solving sequential decision making problems, and recent work has explored its potential to learn navigation polices in a socially compliant manner. However, the expert demonstration data used in existing methods is usually expensive and difficult to obtain. In this work, we consider the task of training an RL agent without employing the demonstration data, to achieve efficient and collision-free navigation in a crowded environment. To address the sparse reward navigation problem, we propose to incorporate the hindsight experience replay (HER) and curriculum learning (CL) techniques with RL to efficiently learn the optimal navigation policy in the dense crowd. The effectiveness of our method is validated in a simulated crowd-robot coexisting environment. The results demonstrate that our method can effectively learn human-aware navigation without requiring additional demonstration data.
Inference and testing in general point process models such as the Hawkes model is predominantly based on asymptotic approximations for likelihood-based estimators and tests. As an alternative, and to improve finite sample performance, this paper considers bootstrap-based inference for interval estimation and testing. Specifically, for a wide class of point process models we consider a novel bootstrap scheme labeled 'fixed intensity bootstrap' (FIB), where the conditional intensity is kept fixed across bootstrap repetitions. The FIB, which is very simple to implement and fast in practice, extends previous ideas from the bootstrap literature on time series in discrete time, where the so-called 'fixed design' and 'fixed volatility' bootstrap schemes have shown to be particularly useful and effective. We compare the FIB with the classic recursive bootstrap, which is here labeled 'recursive intensity bootstrap' (RIB). In RIB algorithms, the intensity is stochastic in the bootstrap world and implementation of the bootstrap is more involved, due to its sequential structure. For both bootstrap schemes, we provide new bootstrap (asymptotic) theory which allows to assess bootstrap validity, and propose a 'non-parametric' approach based on resampling time-changed transformations of the original waiting times. We also establish the link between the proposed bootstraps for point process models and the related autoregressive conditional duration (ACD) models. Lastly, we show effectiveness of the different bootstrap schemes in finite samples through a set of detailed Monte Carlo experiments, and provide applications to both financial data and social media data to illustrate the proposed methodology.
This paper presents a proper generalized decomposition (PGD) based reduced-order model of hierarchical deep-learning neural networks (HiDeNN). The proposed HiDeNN-PGD method keeps both advantages of HiDeNN and PGD methods. The automatic mesh adaptivity makes the HiDeNN-PGD more accurate than the finite element method (FEM) and conventional PGD, using a fraction of the FEM degrees of freedom. The accuracy and convergence of the method have been studied theoretically and numerically, with a comparison to different methods, including FEM, PGD, HiDeNN and Deep Neural Networks. In addition, we theoretically showed that the PGD converges to FEM at increasing modes, and the PGD error is a direct sum of the FEM error and the mode reduction error. The proposed HiDeNN-PGD performs high accuracy with orders of magnitude fewer degrees of freedom, which shows a high potential to achieve fast computations with a high level of accuracy for large-size engineering problems.
Due to real-time image semantic segmentation needs on power constrained edge devices, there has been an increasing desire to design lightweight semantic segmentation neural network, to simultaneously reduce computational cost and increase inference speed. In this paper, we propose an efficient asymmetric dilated semantic segmentation network, named EADNet, which consists of multiple developed asymmetric convolution branches with different dilation rates to capture the variable shapes and scales information of an image. Specially, a multi-scale multi-shape receptive field convolution (MMRFC) block with only a few parameters is designed to capture such information. Experimental results on the Cityscapes dataset demonstrate that our proposed EADNet achieves segmentation mIoU of 67.1 with smallest number of parameters (only 0.35M) among mainstream lightweight semantic segmentation networks.
Quantization has been proven to be an effective method for reducing the computing and/or storage cost of DNNs. However, the trade-off between the quantization bitwidth and final accuracy is complex and non-convex, which makes it difficult to be optimized directly. Minimizing direct quantization loss (DQL) of the coefficient data is an effective local optimization method, but previous works often neglect the accurate control of the DQL, resulting in a higher loss of the final DNN model accuracy. In this paper, we propose a novel metric called Vector Loss. Based on this new metric, we develop a new quantization solution called VecQ, which can guarantee minimal direct quantization loss and better model accuracy. In addition, in order to speed up the proposed quantization process during model training, we accelerate the quantization process with a parameterized probability estimation method and template-based derivation calculation. We evaluate our proposed algorithm on MNIST, CIFAR, ImageNet, IMDB movie review and THUCNews text data sets with numerical DNN models. The results demonstrate that our proposed quantization solution is more accurate and effective than the state-of-the-art approaches yet with more flexible bitwidth support. Moreover, the evaluation of our quantized models on Saliency Object Detection (SOD) tasks maintains comparable feature extraction quality with up to 16$\times$ weight size reduction.
In Perturbative QCD (PQCD) approach we study the direct $CP$ violation in the pure annihilation decay process of $\bar{B}^0_{s}\rightarrowπ^+π^-π^+π^-$ induced by the $ρ$ and $ω$ double resonance effect. Generally, the $CP$ violation is small in the pure annihilation type decay process. However, we find that the $CP$ violation can be enhanced by double $ρ-ω$ interference when the invariant masses of the $π^+π^-$ pairs are in the vicinity of the $ω$ resonance. For the decay process of $\bar{B}^0_{s}\rightarrowπ^+π^-π^+π^-$, the maximum $CP$ violation can reach 28.64{\%}.
We fit the spectral energy distributions (SEDs) of a GeV-TeV FSRQ sample with the leptonic model. Their gamma_min of the relativistic electron distributions, which significantly affect the estimates of the jet properties, are constrained, with a typical value of 48. Their jet power, magnetized parameter, radiation efficiency, and jet production/radiation rates per central black hole (BH) mass are derived and compared to that of BL Lacs. We show that he FSRQ jets may be dominated by the Poynting flux and have a high radiation efficiency, whereas the BL Lac jets are likely dominated by particles and have a lower radiation efficiency than FSRQs. Being different from BL Lacs, the jet powers of FSRQs are proportional to their central BH masses. The jet production and radiation rates of the FSRQs distribute in narrow ranges and are correlated with each other, whereas no similar feature is found for the BL Lacs. We also show that the jet power is correlated with the cavity kinetic power, and the magnetic field energy in the jets may provide the cavity kinetic energy of FSRQs and the kinetic energy of cold protons in the jets may be crucial for cavity kinetic energy of BL Lacs. We suggest that the dominating formation mechanism of FSRQ jets may be the BZ process, but BL Lac jets may be produced via the BP and/or BZ processes, depending on the structures and accretion rates of accretion disks.
We estimate the radiative efficiency (epsilon) of individual type 1 SDSS QSOs by using their bolometric luminosities (L_{bol}) and accretion rates (\dot{M}_{\bullet,acc}), which may be related to the assembly histories and spins of the central massive black holes (MBHs). We estimate L_{bol} by using the empirical spectral energy distributions of QSOs and \dot{M}_{\bullet,acc} by fitting the observed optical luminosity(/-ies) with the thin accretion disk model, assuming the MBH masses given by the virial mass estimator(s) (M_{\bullet,vir}). We find an apparent correlation between epsilon and M_{\bullet,vir}, which is strong at redshift z \la 1.8, weak at z \ga 2, and consistent with that found by Davis & Laor (2011) for 80 PG QSOs at z \leq 0.5. To investigate whether this correlation is intrinsic or not, we construct a mock sample of QSOs according to the true MBH mass and Eddington ratio distributions given in Kelly & Shen (2013). By comparing the results obtained from the mock sample with that from the SDSS sample, we demonstrate that the apparent epsilon-M_{\bullet,vir} correlation can be produced by and mainly due to the selection effects of the SDSS sample and the bias induced by the usage of M_{\bullet,vir} as the true MBH mass. The mean values of epsilon of those SDSS QSOs are consistent with being a constant \simeq 0.11-0.16 over the redshift range of 0.3 \la z \la 4. We conclude that the current SDSS QSO data is consistent with no strong intrinsic correlation between radiative efficiency and true MBH mass and no significant redshift evolution of radiative efficiencies.
Gamma-ray bursts (GRBs) and GeV-TeV selected radio loud Active Galactic Nuclei (AGNs) are compared based on our systematic modeling of the observed spectral energy distributions of a sample of AGNs with a single-zone leptonic model. We show that the correlation between the jet power (P_{jet}) and the prompt gamma-ray luminosity (L_{jet}) of GRBs is consistent, within the uncertainties, with the correlation between jet power and the synchrotron peak luminosity (L_{s, jet}) of flat spectrum radio quasars (FSRQs). Their radiation efficiencies (\varepsilon) are also comparable (>10% for most sources), which increase with the bolometric jet luminosity (L_{bol,jet}) for FSRQs and with the L_{jet} for GRBs with similar power-law indices. BL Lacs do not follow the P_{jet}-L_{s, jet} relation of FSRQs. They have lower \varepsilon and L_{bol, jet} values than FSRQs, and a tentative L_{bol, jet}-\varepsilon relation is also found, with a power-law index being different from that of the FSRQs. The magnetization parameters (σ) of FSRQs are averagely larger than that of BL Lacs. They are anti-correlated with $\varepsilon$ for the FSRQs, but positive correlated with \varepsilon for the BL Lacs. GeV Narrow-line Seyfert 1 galaxies potentially share similar properties with FSRQs. Based on the analogy between GRBs and FSRQs, we suggest that the prompt gamma-ray emission of GRBs is likely produced by synchrotron process in a magnetized jet with high radiation efficiency, similar to FSRQs. The jets of BL Lacs, on the other hand, are less efficient and are likely more matter dominated.
We implemented a nanoelectronic interface between graphene field effect transistors (FETs) and soluble proteins. This enables production of bioelectronic devices that combine functionalities of the biomolecular and inorganic components. The method serves to link polyhistidine-tagged proteins to graphene FETs using the tag itself. Atomic Force Microscopy and Raman spectroscopy provide structural understanding of the bio/nano hybrid; current-gate voltage measurements are used to elucidate the electronic properties. As an example application, we functionalize graphene FETs with fluorescent proteins to yield hybrids that respond to light at wavelengths defined by the optical absorption spectrum of the protein
We report electronic measurements on high-quality graphene nanoconstrictions (GNCs) fabricated in a transmission electron microscope (TEM), and the first measurements on GNC conductance with an accurate measurement of constriction width down to 1 nm. To create the GNCs, freely-suspended graphene ribbons were fabricated using few-layer graphene grown by chemical vapor deposition. The ribbons were loaded into the TEM, and a current-annealing procedure was used to clean the material and improve its electronic characteristics. The TEM beam was then used to sculpt GNCs to a series of desired widths in the range 1 - 700 nm; after each sculpting step, the sample was imaged by TEM and its electronic properties measured in-situ. GNC conductance was found to be remarkably high, comparable to that of exfoliated graphene samples of similar size. The GNC conductance varied with width approximately as, where w is the constriction width in nanometers. GNCs support current densities greater than 120 \muA/nm2, two orders of magnitude higher than has been previously reported for graphene nanoribbons and 2000 times higher than copper.
Graphene is a true two dimensional material with exceptional electronic properties and enormous potential for practical applications. Graphene's promise as a chemical sensor material has been noted but there has been relatively little work on practical chemical sensing using graphene, and in particular how chemical functionalization may be used to sensitize graphene to chemical vapors. Here we show one route towards improving the ability of graphene to work as a chemical sensor by using single stranded DNA as a sensitizing agent. The resulting broad response devices show fast response times, complete and rapid recovery to baseline at room temperature, and discrimination between several similar vapor analytes.
Graphene is a purely two-dimensional material that has extremely favorable chemical sensor properties. It is known, however, that conventional nanolithographic processing typically leaves a resist residue on the graphene surface, whose impact on the sensor characteristics of the system has not yet been determined. Here we show that the contamination layer both degrades the electronic properties of the graphene and masks graphene s intrinsic sensor responses. The contamination layer chemically dopes the graphene, enhances carrier scattering, and acts as an absorbent layer that concentrates analyte molecules at the graphene surface, thereby enhancing the sensor response. We demonstrate a cleaning process that verifiably removes the contamination on the device structure and allows the intrinsic chemical responses of graphene to be measured.
Prompt optical emission from the $γ$-ray burst of GRB 041219A has been reported by Vestrand et al. There was a fast rise of optical emission simultaneous with the dominant $γ$-ray pulse, and a tight correlation with the prompt $γ$-ray emission has been displayed. These indicate that the prompt optical emission and $γ$-ray emission would naturally have a common origin. We propose that this optical component can be modeled by considering the Comptonization of $γ$-ray photons by an electron cloud. As a result of this mechanism, the arrival time of the optical photons is delayed compared with that of the $γ$-rays. We restrict that the lag time to be shorter than 10 s, within which the prompt optical emission is considered to vary simultaneously with the prompt $γ$-ray emission. Taking the observations of GRB 041219A into account, we derive the number density of the surrounding electron cloud required for Comptonization. The redshift of GRB 041219A is predicted to be $z\lesssim 0.073$ as well.