arXiv subjects

Yangyang Fu

Publications and source records attributed to Yangyang Fu.

At least 19 recordsLinked to original sources

arXiv2026

Generalized Similarity Theory for Plasmas

A generalized theory of plasma similarity is established based on the scaling of the Boltzmann equation coupled with the full set of Maxwell's equations. The predicted similarity scalings are demonstrated through first-principles particle-in-cell and fluid simulations across diverse operational regimes, including collisionless plasmas with two-stream instabilities, pure electron diodes spanning the classical to relativistic regimes, electromagnetic-wave-driven plasmas, and discharge plasmas ranging from low to high ionization regimes. The generalized theory reveals the intrinsic scale-invariant nature of plasmas under specified conditions, rooted in the symmetry and scaling transformations of the governing equations.

physics.plasm-ph↗

arXiv2026

Similarity Theory and Scaling Networks for Electromagnetic Wave-Driven Plasmas

We demonstrate the scale-invariant behavior of electromagnetic wave-driven radio-frequency plasmas across different dimensional scales. Using two-dimensional electromagnetic particle-in-cell simulations, we show that plasma uniformity remains the same in similar discharges. Building on the concept of similarity laws, we develop scaling networks that effectively relate plasma parameters across varying operating conditions. These results establish a generalized similarity theory derived from the Boltzmann equation coupled with the full set of Maxwell equations, extending the theoretical framework of similarity laws into electromagnetic regimes.

physics.plasm-ph↗

arXiv2025

Charge transport and mode transition in dual-energy electron beam diodes

This Letter uncovers five distinct charge transport modes and their transitions in dual-energy electron beam diodes. We via first-principle particle-in-cell (PIC) simulations establish that the specific mode (e.g., space charge oscillations) and the current transport characteristics are essentially governed by the interplay between the electron beam energy and injected current density. A generalized analysis is conducted for n-component electron beams, and a theoretical piecewise function is for the transmitted current density proposed, which agrees well with the PIC results under designed conditions. The discovery provides a mechanistic picture of multiple electron beam transport in diodes, paving the way for novel designs of high-performance modern vacuum electronic devices.

physics.plasm-ph↗

arXiv2025

SF6 streamer breakdown induced by floating linear metal particles: Following streamers and side streamers

The electrical breakdown of SF6 in the presence of floating metal particles is facilitated by two key factors: the role of floating metal particles and the nonlinear breakdown behavior of high-pressure SF6. However, the microscopic transient processes remain unclear, motivating this paper. Using 2D fluid models, we investigate SF6 streamer breakdown induced by a floating linear metal particle under negative applied voltage. First, We identify a characteristic double-end streamer inception in the combined gap. Then, we propose the following streamer (FS) mechanism to explain the metal particle's role. Two following streamers, FS1 and FS2, arise from the interaction between space charge and metal particle. FS1 facilitates breakdown via the negative space charge field generated by its head. FS2 facilitates breakdown by merging with FS1, accelerating its propagation and enhancing the electric field at the primary streamer head. Finally, we propose the side streamer (SS) mechanism to explain the nonlinear breakdown behavior of high-pressure SF6. The SS is identified as a new forward ionization wave that develops along the sides of the primary streamer, due to photoionization-driven negative ion accumulation. SS facilitates breakdown by merging with the primary streamer, increasing negative space charge and leading to three distinct propagation modes. Higher pressure increases the production rate of negative ions along the streamer sides, making SS more likely to form. Under overvoltage, the facilitating effect of SS diminishes as the background field (E/N)b strengthens, disappearing when (E/N)b exceeds 245 Td. This study provides new insights into the SF6 streamer breakdown mechanisms induced by floating metal particles and offers theoretical references for further investigation on the quantitative characterization.

physics.plasm-ph↗

arXiv2024

Spatial Fluctuation of the Electric Field within SF6 Streamer Channel in Highly Non-Uniform Fields: Phenomenon, Validation, and Mechanism

The electric field within the streamer channel is a critical parameter in the calculation model for the nonlinear breakdown voltage of SF6, motivating the research presented in this paper. By using a 2D fluid model, we investigate the microscopic characteristics of the SF6 streamer channel in highly non-uniform fields and uncover a previously unexplained coherent structure: the spatial fluctuation of the electric field (SFEF). We validate the physical validity of SFEF by modifying model parameters that could potentially introduce non-physical effects. Further comparative analysis reveals that SFEF is driven by an ion-conducting channel formed due to the strong electronegativity of SF6. This ion-conducting channel exhibits local characteristics, which fundamentally arise from the slow response of charged species to local charge relaxation. We identify that some charge separation originates from the accumulation of negative ions at the rear edge of the streamer head due to strong electric field shielding in this region. As the streamer propagates, charge separation is continuously generated and passively carried into the streamer channel, ultimately forming the SFEF. Finally, we confirm that SFEF does not occur in uniform fields, indicating that it is a phenomenon exclusive to highly non-uniform fields. These findings provide a deep insight into the electric field within the SF6 streamer channel and offer a potential avenue for further investigation into the mechanisms of SF6 nonlinear breakdown voltage.

physics.plasm-ph↗

arXiv2024

Functional control of anomalous reflection via engineered metagratings without polarization limitations

Metagratings (MGs) have emerged as a promising platform for manipulating the anomalous propagation of electromagnetic waves. However, traditional methods for designing functional MG-based devices face significant challenges, including complex model structures, time-consuming optimization processes, and specific polarization requirements. In this work, we propose an inverse-design approach to engineer simple MG structures comprising periodic air grooves on a flat metal surface, which can control anomalous reflection without polarization limitations. Through rigorous analytical methods, we derive solutions that achieve perfect retroreflection and perfect specular reflection, thereby leading to functional control over the linearly-polarized electromagnetic waves. Such capabilities enable intriguing functionalities including polarization-dependent retroreflection and polarization-independent retroreflection, as confirmed through full-wave simulations. Our work offers a simple and effective method to control freely electromagnetic waves, with potential applications spanning wavefront engineering, polarization splitting, cloaking technologies, and remote sensing.

physics.optics↗

arXiv2024

Microscopic characteristics of SF6 partial discharge induced by a floating linear metal particle

Direct current (DC) gas insulated transmission lines (GILs) have been widely used in power transmission, but might be threatened by partial discharge due to the presence of floating impurities (e.g., dust and metal particles) inside the sealed chamber. In this letter, by using a 2D fluid model we characterize the microscopic properties of the partial discharge induced by a floating linear metal particle in SF6 (both the discharge propagation and interaction between space charge and metal particle) under negative high voltage direct current (HVDC) conditions. Due to the strong electronegativity of SF6, the spatiotemporal distributions of the charged species (electrons, positive and negative ions), space charge, and reduced electric field are rather different from those in air. Notably, a negative ion region is observed around the top tip of the metal particle, and it plays an important role in the generation and propagation of primary and secondary streamers in SF6, which may lead to severe motion characteristics of the particle and aliasing of partial discharge signals. Additionally, we analyze the charging process and electric force reversal phenomenon, which may provide a more precise understanding of the underlying mechanisms of the firefly motion previously reported for DC GILs.

physics.plasm-ph↗

arXiv2023

Development of a Hardware-in-the-loop Testbed for Laboratory Performance Verification of Flexible Building Equipment in Typical Commercial Buildings

The goals of reducing energy costs, shifting electricity peaks, increasing the use of renewable energy, and enhancing the stability of the electric grid can be met in part by fully exploiting the energy flexibility potential of buildings and building equipment. The development of strategies that exploit these flexibilities could be facilitated by publicly available high-resolution datasets illustrating how control of HVAC systems in commercial buildings can be used in different climate zones to shape the energy use profile of a building for grid needs. This article presents the development and integration of a Hardware-In-the-Loop Flexible load Testbed (HILFT) that integrates physical HVAC systems with a simulated building model and simulated occupants with the goal of generating datasets to verify load flexibility of typical commercial buildings. Compared to simulation-only experiments, the hardware-in-the-loop approach captures the dynamics of the physical systems while also allowing efficient testing of various boundary conditions. The HILFT integration in this article is achieved through the co-simulation among various software environments including LabVIEW, MATLAB, and EnergyPlus. Although theoretically viable, such integration has encountered many real-world challenges, such as: 1) how to design the overall data infrastructure to ensure effective, robust, and efficient integration; 2) how to avoid closed-loop hunting between simulated and emulated variables; 3) how to quantify system response times and minimize system delays; and 4) how to assess the overall integration quality. Lessons-learned using the examples of an AHU-VAV system, an air-source heat pump system, and a water-source heat pump system are presented.

eess.SY↗

arXiv2022

A critical review of cyber-physical security for building automation systems

Modern Building Automation Systems (BASs), as the brain that enables the smartness of a smart building, often require increased connectivity both among system components as well as with outside entities, such as optimized automation via outsourced cloud analytics and increased building-grid integrations. However, increased connectivity and accessibility come with increased cyber security threats. BASs were historically developed as closed environments with limited cyber-security considerations. As a result, BASs in many buildings are vulnerable to cyber-attacks that may cause adverse consequences, such as occupant discomfort, excessive energy usage, and unexpected equipment downtime. Therefore, there is a strong need to advance the state-of-the-art in cyber-physical security for BASs and provide practical solutions for attack mitigation in buildings. However, an inclusive and systematic review of BAS vulnerabilities, potential cyber-attacks with impact assessment, detection & defense approaches, and cyber-secure resilient control strategies is currently lacking in the literature. This review paper fills the gap by providing a comprehensive up-to-date review of cyber-physical security for BASs at three levels in commercial buildings: management level, automation level, and field level. The general BASs vulnerabilities and protocol-specific vulnerabilities for the four dominant BAS protocols are reviewed, followed by a discussion on four attack targets and seven potential attack scenarios. The impact of cyber-attacks on BASs is summarized as signal corruption, signal delaying, and signal blocking. The typical cyber-attack detection and defense approaches are identified at the three levels. Cyber-secure resilient control strategies for BASs under attack are categorized into passive and active resilient control schemes. Open challenges and future opportunities are finally discussed.

cs.CR↗

arXiv2022

Development of a hardware-In-the-Loop (HIL) testbed for cyber-physical security in smart buildings

As smart buildings move towards open communication technologies, providing access to the Building Automation System (BAS) through the intranet, or even remotely through the Internet, has become a common practice. However, BAS was historically developed as a closed environment and designed with limited cyber-security considerations. Thus, smart buildings are vulnerable to cyber-attacks with the increased accessibility. This study introduces the development and capability of a Hardware-in-the-Loop (HIL) testbed for testing and evaluating the cyber-physical security of typical BASs in smart buildings. The testbed consists of three subsystems: (1) a real-time HIL emulator simulating the behavior of a virtual building as well as the Heating, Ventilation, and Air Conditioning (HVAC) equipment via a dynamic simulation in Modelica; (2) a set of real HVAC controllers monitoring the virtual building operation and providing local control signals to control HVAC equipment in the HIL emulator; and (3) a BAS server along with a web-based service for users to fully access the schedule, setpoints, trends, alarms, and other control functions of the HVAC controllers remotely through the BACnet network. The server generates rule-based setpoints to local HVAC controllers. Based on these three subsystems, the HIL testbed supports attack/fault-free and attack/fault-injection experiments at various levels of the building system. The resulting test data can be used to inform the building community and support the cyber-physical security technology transfer to the building industry.

cs.CR↗

arXiv2022

Asymmetric nonlinear-mode-conversion in an optical waveguide with PT symmetry

Asymmetric mode transformation in waveguide is of great significance for on-chip integrated devices with one-way effect, while it is challenging to achieve asymmetric nonlinear-mode-conversion (NMC) due to the limitations imposed by phase-matching. In this letter, we theoretically proposed a new scheme for realizing asymmetric NMC by combining frequency-doubling process and periodic PT symmetric modulation in an optical waveguide. By engineering the one-way momentum from PT symmetric modulation, we have demonstrated the unidirectional conversion from pump to second harmonic with desired guided modes. Our findings offer new opportunities for manipulating nonlinear optical fields with PT symmetry, which could further boost more exploration on on-chip nonlinear devices assisted by non-Hermitian optics.

physics.optics↗

arXiv2021

Learning-based Framework for Sensor Fault-Tolerant Building HVAC Control with Model-assisted Learning

As people spend up to 87% of their time indoors, intelligent Heating, Ventilation, and Air Conditioning (HVAC) systems in buildings are essential for maintaining occupant comfort and reducing energy consumption. These HVAC systems in smart buildings rely on real-time sensor readings, which in practice often suffer from various faults and could also be vulnerable to malicious attacks. Such faulty sensor inputs may lead to the violation of indoor environment requirements (e.g., temperature, humidity, etc.) and the increase of energy consumption. While many model-based approaches have been proposed in the literature for building HVAC control, it is costly to develop accurate physical models for ensuring their performance and even more challenging to address the impact of sensor faults. In this work, we present a novel learning-based framework for sensor fault-tolerant HVAC control, which includes three deep learning based components for 1) generating temperature proposals with the consideration of possible sensor faults, 2) selecting one of the proposals based on the assessment of their accuracy, and 3) applying reinforcement learning with the selected temperature proposal. Moreover, to address the challenge of training data insufficiency in building-related tasks, we propose a model-assisted learning method leveraging an abstract model of building physical dynamics. Through extensive experiments, we demonstrate that the proposed fault-tolerant HVAC control framework can significantly reduce building temperature violations under a variety of sensor fault patterns while maintaining energy efficiency.

eess.SY↗

arXiv2020

Phase-gradient metasurfaces based on local Fabry-Perot resonances

In this work we present a new mechanism for designing phase-gradient metasurfaces (PGMs) to control an electromagnetic wavefront with high efficiency. Specifically, we design a transmission-type PGM formed by a periodic subwavelength metallic slit array filled with identical dielectrics of different heights. It is found that when Fabry-Perot (FP) resonances occur locally inside the dielectric regions, in addition to the common phenomenon of complete transmission, the transmitted phase differences between two adjacent slits are exactly the same, being a non-zero constant. These local FP resonances ensure total phase shift across a supercell that can fully cover the range of 0 to 2Pi, satisfying the design requirements of PGMs. More studies reveal that due to local FP resonances, there is a one-to-one correspondence between the phase difference and the permittivity of the filled dielectric. A similar approach can be extended to the reflection-type case and other wavefront transformation, creating new opportunities for wave manipulation.

physics.optics↗

arXiv2020

Multi-stage Power Scheduling Framework for Data Center with Chilled Water Storage in Energy and Regulation Markets

Leveraging electrochemical and thermal energy storage systems has been proposed as a strategy to reduce peak power in data centers. Thermal energy storage systems, such as chilled water tanks, have gained increasing attention in data centers for load shifting due to their relatively small capital and operational costs compared to electrochemical energy storage. However, there are few studies investigating the possibility of utilizing thermal energy storage system with resources to provide ancillary services (e.g., frequency regulation) to the grid. This paper proposes a synergistic control strategy for the data center with a chilled water storage providing frequency regulation service by adjusting the chiller capacity, storage charging rate, and IT server CPU frequency. Then, a three-stage multi-market scheduling framework based on a model predictive control scheme is developed to minimize operational costs of data centers participating in both energy and regulation markets. The framework solves a power baseline scheduling problem, a regulation reserve problem, and a real-time power signal tracking problem sequentially. Simulation results show that utilizing the thermal energy storage can increase the regulation capacity bid, reduce energy costs and demand charges, and also harvest frequency regulation revenues. The proposed multi-market scheduling framework in a span of two days can reduce the operational costs up to 8.8% ($1,606.4) compared to the baseline with 0.2% (\$38.7) energy cost reduction, 6.5% (\$1,179.4) from demand reduction, and 2.1% (\$338.3) from regulation revenues.

eess.SY↗

arXiv2020

Switchable bifunctional metasurfaces: nearly perfect retroreflection and absorption at THz regime

Here we make use of vanadium dioxide (VO2) to design a bifunctional metasurface working at the same targeted frequency. With the increase of temperature, the functionality of the designed metasurface can switch from a multi-channel retroreflector to a perfect absorber, caused by the phase transition of VO2 from insulator to conductor. Different from traditional bifunctional metasurfaces designed by simple composition of two functionalities, our proposed bifunctional metasurface is based on the interaction between two functionalities. The device shows good potential for the combination of wavefront manipulation and optical absorption, therefore providing a promising approach for switchable detection and anti-detection devices.

physics.optics↗

arXiv2020

Controllably asymmetric beam splitting via gap-induced diffraction channel transition in dual-layer binary metagratings

In this work, we designed and studied a feasible dual-layer binary metagrating, which can realize controllable asymmetric transmission and beam splitting with nearly perfect performance. Owing to ingenious geometry configuration, only one meta-atom is required to design for the metagrating system. By simply controlling air gap between dual-layer metagratings, high-efficiency beam splitting can be well switched from asymmetric transmission to symmetric transmission. The working principle lies on gap-induced diffraction channel transition for incident waves from opposite directions. The asymmetric/symmetric transmission can work in a certain frequency band and a wide incident range.Compared with previous methods using acoustic metasurfaces, our approach has the advantages of simple design and tunable property and shows promise for applications in wavefront manipulation,noise control and acoustic diode.

physics.app-ph↗

arXiv2020

Enhanced third-harmonic generation induced by nonlinear field resonances in plasmonic-graphene metasurfaces

Nonlinear metasurfaces offer new paradigm for boosting optical effect beyond limitations of conventional materials. In this work, we present an alternative way to produce pronounced third-harmonic generation (THG) based on nonlinear field resonances rather than linear field enhancement, which is a typical strategy for achieving strong nonlinear response. By designing and studying a nonlinear plasmonic-graphene metasurface at terahertz regime with hybrid guided modes and bound states in the continuum modes, it is found that a THG with a narrow bandwidth can be observed, thanks to the strong resonance between generated weak THG field and these modes. Such strong nonlinear field resonance greatly enhances the photon-photon interactions, thus resulting in a large effective nonlinear coefficient of the whole system. This finding provides new opportunity for studying nonlinear optical metasurfaces.

physics.optics↗

arXiv2019

An Open Source Modeling Framework for Interdependent Energy-Transportation- Communication Infrastructure in Smart and Connected Communities

Infrastructure in future smart and connected communities is envisioned as an aggregate of public services, including the energy, transportation and communication systems, all intertwined with each other. The intrinsic interdependency among these systems may exert underlying influence on both design and operation of the heterogeneous infrastructures. However, few prior studies have tapped into the interdependency among the three systems in order to quantify their potential impacts during standard operation. In response to this, this paper proposes an open source, flexible, integrated modeling framework suitable for designing coupled energy, transportation, and communication systems and for assessing the impact of their interdependencies. First, a novel multi-level, multi-layer, multi-agent approach is proposed to enable flexible modeling of the interconnected energy, transportation, and communication systems. Then, for the framework's proof-of-concept, preliminary component and system-level models for different systems are designed and implemented using Modelica, an equation-based object-oriented modeling language. Finally, three case studies of gradually increasing complexity are presented (energy, energy + transportation, energy + transportation + communication) to evaluate the interdependencies among the three systems. Quantitative analyses show that the deviation of the average velocity on the road can be 10.5\% and the deviation of the power draw from the grid can be 7\% with or without considering the transportation and communication system at the peak commute time, indicating the presence of notable interdependencies. The proposed modeling framework also has the potential to be further extended for various modeling purposes and use cases, such as dynamic modeling and optimization, resilience analysis, and integrated decision making in future connected communities.

eess.SY↗