arXiv subjects

Yangjun Ying

Publications and source records attributed to Yangjun Ying.

10 recordsLinked to original sources

arXiv2026

Generation of fission yield covariance matrices and its application in uncertainty analysis of decay heat

The uncertainties and covariance matrices of fission yield are important in the uncertainty analysis of decay heat. At present, there are no covariance matrixes of fission yield given in the evaluated nuclear data library, although they have provided the uncertainties with good estimates. In this work, the generalized least squares (GLS) updating approach was adopted to evaluate the fission yield covariances with the constraints from basic physical conservation equation and chain yield data, using the nuclear data files from ENDF/B-VIII.0, JENDL-5 and JEFF-3.3. Based on these original and updated data, summation calculation was performed for fission pulse decay heat of thermal neutron-induced fission of $^{235}$U. The uncertainties of decay heat were obtained through generalized perturbation theory, including the uncertainties propagated from fission yield, decay energy, decay constant and branching ratio. The original uncorrelated yield data contributes a $\sim 4 \%$ uncertainty at all times and dominates the decay heat uncertainty at cooling times longer than \SI{100}{s}. With the generated covariance matrixes, the uncertainty of calculated decay heat is strongly reduced and decay energy data makes a major contribution in general. The relative uncertainties at cooling time \SI{0.1}{\second} are $\sim$10$\%$ for ENDF/V-VIII.0 and JEFF-3.3 and $\sim$5$\%$ for JENDL-5 and those at cooling time 10$^{5}$ s are about 1$\%$ for three libraries. The influence of the GLS updating procedure on the contributions of important fission products to decay heat and their sensitive coefficients was also discussed.

nucl-th↗

arXiv2023

Elastic scattering and total reaction cross sections of $^{6}$Li studied with a microscopic continuum discretized coupled channels model

We present a systematic study of $^{6}$Li elastic scattering and total reaction cross sections at incident energies around the Coulomb barrier within the continuum discretized coupled-channels (CDCC) framework, where $^{6}$Li is treated in an $\alpha$+$d$ two-body model. Collisions with $^{27}$Al, $^{64}$Zn, $^{138}$Ba and $^{208}$Pa are analyzed. The microscopic optical potentials (MOP) based on Skyrme nucleon-nucleon interaction for $\alpha$ and $d$ are adopted in CDCC calculations and satisfactory agreement with the experimental data is obtained without any adjustment on MOPs. For comparison, the $\alpha$ and $d$ global phenomenological optical potentials (GOP) are also used in CDCC analysis and a reduction no less than 50$\%$ on the surface imaginary part of deuteron GOP is required for describing the data. In all cases, the $^6$Li breakup effect is significant and provides repulsive correction to the folding model potential. The reduction on the surface imaginary part of GOP of deuteron reveals a strong suppression of the reaction probability of deuteron as a component of $^{6}$Li as compared with that of a free deuteron. A further investigation is made by taking the $d$ breakup process into account equivalently within the dynamic polarization potential approach and it shows that $d$ behaves like a tightly bound nucleus in $^{6}$Li induced reactions.

nucl-th↗

arXiv2023

Continuum-discretized coupled-channel calculations for $^{6}$Li fusion reactions with closed channels

Fusion reactions induced by the weakly bound nucleus $^{6}$Li with targets $^{28}$Si, $^{64}$Ni, $^{144}$Sm and $^{209}$Bi at energies around the Coulomb barrier are investigated within a three-body model where $^{6}$Li is described with an $\alpha + d$ cluster model. The total fusion (TF) cross sections are calculated with the continuum-discretized coupled-channel (CDCC) method and the complete fusion (CF) cross sections are extracted through the sum-rule model. The calculations demonstrate that (i) for the TF cross section calculations, the continuum states up to 40 MeV are found to be necessary, which corresponds to the inclusion of closed channels for light and medium mass targets, such as $^{28}$Si, $^{59}$Co and $^{144}$Sm, (ii) the converged CDCC results for TF cross section at energies above the Coulomb barrier are almost the same as single channel results in which the continuum coupling effect is neglected, and (iii) the continuum coupling strongly influences partial wave fusion cross sections and the closed channels play a significant role in the improvement of the description of the CF cross sections at energies below the Coulomb barrier for the $^6$Li+$^{28}$Si, $^{59}$Co and $^{144}$Sm systems.

nucl-th↗

arXiv2021

Application of the Lagrange mesh method in continuum-discretized coupled-channels calculations

We apply the Lagrange-mesh method to discretize continuum states of weakly bound nuclei for continuum-discretized coupled-channel (CDCC) calculations of three-body breakup reactions. This discretization method is compared with the bin method, which is regarded as the standard continuum discretization method, for the $d$ and $^6$Li induced reactions. An improved Numerov algorithm is used to solve the coupled channels equations, which permits a fast integration of equations and a convenient treatment of the closed channels. A new CDCC model code named \emph{CDCC-R} is developed. In all cases, the combination of the Lagrange-mesh method and the Numerov algorithm shows high efficiency and accuracy for the CDCC calculations of the elastic scattering and breakup reactions. Especially, various numerical and physical aspects are discussed for $^6$Li induced reactions. The coupling effects of the continuum states with high orbital angular momentum and closed channels are discussed. Moderate effects are found in the calculations for elastic scattering and breakup reaction when $F$- and $G$-wave continuum states are included in CDCC model space for $^6$Li induced reactions at the incident energies well above the Coulomb barrier. The closed channel effect is found to be indispensable for $^6$Li breakup reaction calculation when the incident energy is around the Coulomb barrier.

nucl-th↗

arXiv2018

Discrete Boltzmann model for implosion and explosion related compressible flow with spherical symmetry

To kinetically model implosion and explosion related phenomena, we present a theoretical framework for constructing Discrete Boltzmann Model(DBM) with spherical symmetry in spherical coordinates. To this aim, a key technique is to use \emph{local} Cartesian coordinates to describe the particle velocity in the kinetic model. Thus, the geometric effects, like the divergence and convergence, are described as a \textquotedblleft force term\textquotedblright. To better access the nonequilibrium behavior, even though the corresponding hydrodynamic model is one-dimensional, the DBM uses a Discrete Velocity Model(DVM) with 3 dimensions. A new scheme is introduced so that the DBM can use the same DVM no matter considering the extra degree of freedom or not. As an example, a DVM with 26 velocities is formulated to construct the DBM in the Navier-Stokes level. Via the DBM, one can study simultaneously the hydrodynamic and thermodynamic nonequilibrium behaviors in the implosion and explosion process which are not very close to the spherical center. The extension of current model to the multiple-relaxation-time version is straightforward.

physics.comp-ph↗

arXiv2015

Complex fields in heterogeneous materials under shock: modeling, simulation and analysis

In this mini-review we summarize the progress of modeling, simulation and analysis of shock responses of heterogeneous materials in our group in recent years. The basic methodology is as below. We first decompose the problem into different scales. Construct/Choose a model according to the scale and main mechanisms working at that scale. Perform numerical simulations using the relatively mature schemes. The physical information is transferred between neighboring scales in such a way: The statistical information of results in smaller scale contributes to establishing the constitutive equation in larger one. Except for the microscopic Molecular Dynamics (MD) model, both the mesoscopic and macroscopic models can be further classified into two categories, solidic and fluidic models, respectively. The basic ideas and key techniques of the MD, material point method and discrete Boltzmann method are briefly reviewed. Among various schemes used in analyzing the complex fields and structures, the morphological analysis and the home-built software, GISO, are briefly introduced. New observations are summarized for scales from the larger to the smaller.

cond-mat.soft↗

arXiv2015

Thermo-hydrodynamic non-equilibrium effects on compressible Rayleigh-Taylor instability

The effects of compressibility on Rayleigh-Taylor instability (RTI) are investigated by inspecting the interplay between thermodynamic and hydrodynamic non-equilibrium phenomena (TNE, HNE, respectively) via a discrete Boltzmann model (DBM). Two effective approaches are presented, one tracking the evolution of the \emph{local} TNE effects and the other focussing on the evolution of the mean temperature of the fluid, to track the complex interfaces separating the bubble and the spike regions of the flow. It is found that, both the compressibility effects and the \emph{global} TNE intensity show opposite trends in the initial and the later stages of the RTI. Compressibility delays the initial stage of RTI and accelerates the later stage. Meanwhile, the TNE characteristics are generally enhanced by the compressibility, especially in the later stage. The global or mean thermodynamic non-equilibrium indicators provide physical criteria to discriminate between the two stages of the RTI.

cond-mat.soft↗

arXiv2013

Simulation study on cavity growth in ductile metal materials under dynamic loading

Cavity growth in ductile metal materials under dynamic loading is investigated via the material point method. Two typical cavity effects in the region subjected to rarefaction wave are identified: (i) part of material particles flow away from the cavity in comparison to the initial loading velocity, (ii) local regions show weaker negative or even positive pressures. Neighboring cavities interact via coalescence of isobaric contours. The growth of cavity under tension shows staged behaviors. After the initial slow stage, the volume and the dimensions in both the tensile and transverse directions show linear growth rate with time until the global tensile wave arrives at the upper free surface. It is interesting that the growth rate in the transverse direction is faster than that in the tensile direction. The volume growth rate linearly increases with the initial tensile velocity. After the global tensile wave passed the cavity, both the maximum particle velocity in the tensile direction and the maximum particle velocity in the opposite direction increase logarithmically with the initial tensile speed. The shock wave reflected back from the cavity and compression wave from the free surface induce the initial behavior of interfacial instabilities such as the Richtmyer-Meshkov instability, which is mainly responsible for the irregularity in the morphology of deformed cavity. The local temperatures and distribution of hot spots are determined by the plastic work. Compared with the dynamical process, the heat conduction is much slower.

cond-mat.mtrl-sci↗

arXiv2013

Lattice Boltzmann model for combustion and detonation

In this paper we present a lattice Boltzmann model for combustion and detonation. In this model the fluid behavior is described by a finite-difference lattice Boltzmann model by Gan et al. [Physica A, 2008, 387: 1721]. The chemical reaction is described by the Lee-Tarver model [Phys. Fluids, 1980, 23: 2362]. The reaction heat is naturally coupled with the flow behavior. Due to the separation of time scales in the chemical and thermodynamic processes, a key technique for a successful simulation is to use the operator-splitting scheme. The new model is verified and validated by well-known benchmark tests. As a specific application of the new model, we studied the simple steady detonation phenomenon. To show the merit of LB model over the traditional ones, we focus on the reaction zone to study the non-equilibrium effects. It is interesting to find that, at the von Neumann peak, the system is nearly in its thermodynamic equilibrium. At the two sides of the von Neumann peak, the system deviates from its equilibrium in opposite directions. In the front of von Neumann peak, due to the strong compression from the reaction product behind the von Neumann peak, the system experiences a sudden deviation from thermodynamic equilibrium. Behind the von Neumann peak, the release of chemical energy results in thermal expansion of the matter within the reaction zone, which drives the system to deviate the thermodynamic equilibrium in the opposite direction. From the deviation from thermodynamic equilibrium, defined in this paper, one can understand more on the macroscopic effects of the system due to the deviation from its thermodynamic equilibrium.

cond-mat.soft↗

arXiv2010

Shock Wave Response of Porous Materials: From Plasticity to Elasticity

Shock wave reaction results in various characteristic regimes in porous material. The geometrical and topological properties of these regimes are highly concerned in practical applications. Via the morphological analysis to characteristic regimes with high temperature, we investigate the thermodynamics of shocked porous materials whose mechanical properties cover a wide range from hyperplasticity to elasticity. It is found that, under fixed shock strength, the total fractional area $A$ of the high-temperature regimes with $T \geq T_{th}$ and its saturation value first increase, then decrease with the increasing of the initial yield $\sigma_{Y0}$, where $T_{th}$ is a given threshold value of temperature $T$. In the shock-loading procedure, the fractional area $A(t)$ may show the same behavior if $T_{th}$ and $\sigma_{Y0}$ are chosen appropriately. Under the same $A(t)$ behavior, $T_{th}$ first increases then decreases with $\sigma_{Y0}$. At the maximum point $\sigma_{Y0M}$, the shock wave contributes the maximum plastic work. Around $\sigma_{Y0M}$, two materials with different mechanical properties may share the same $A(t)$ behavior even for the same $T_{th}$. The characteristic regimes in the material with the larger $\sigma_{Y0}$ are more dispersed.

cond-mat.mtrl-sci↗