arXiv subjects

Yanbei Chen

Publications and source records attributed to Yanbei Chen.

At least 217 records · Page 12Linked to original sources

arXiv2008

Double optical spring enhancement for gravitational wave detectors

Currently planned second-generation gravitational-wave laser interferometers such as Advanced LIGO exploit the extensively investigated signal-recycling (SR) technique. Candidate Advanced LIGO configurations are usually designed to have two resonances within the detection band, around which the sensitivity is enhanced: a stable optical resonance and an unstable optomechanical resonance - which is upshifted from the pendulum frequency due to the so-called optical-spring effect. Alternative to a feedback control system, we propose an all-optical stabilization scheme, in which a second optical spring is employed, and the test mass is trapped by a stable ponderomotive potential well induced by two carrier light fields whose detunings have opposite signs. The double optical spring also brings additional flexibility in re-shaping the noise spectral density and optimizing toward specific gravitational-wave sources. The presented scheme can be extended easily to a multi-optical-spring system that allows further optimization.

gr-qc↗

arXiv2008

A route to observing ponderomotive entanglement with optically trapped mirrors

The radiation pressure of two detuned laser beams can create a stable trap for a suspended cavity mirror; here it is shown that such a configuration entangles the output light fields via interaction with the mirror. Intra-cavity, the opto-mechanical system can become entangled also. The degree of entanglement is quantified spectrally using the logarithmic negativity. Entanglement survives in the experimentally accessible regime of gram-scale masses subject to thermal noise at room temperature.

quant-ph↗

arXiv2007

Entanglement of macroscopic test masses and the Standard Quantum Limit in laser interferometry

We show that the generation of entanglement of two heavily macroscopic mirrors with masses of up to several kilograms are feasible with state of the art techniques of high-precision laser interferometry. The basis of such a demonstration would be a Michelson interferometer with suspended mirrors and simultaneous homodyne detections at both interferometer output ports. We present the connection between the generation of entanglement and the Standard Quantum Limit (SQL) for a free mass. The SQL is a well-known reference limit in operating interferometers for gravitational-wave detection and provides a measure of when macroscopic entanglement can be observed in the presence of realistic decoherence processes.

quant-ph↗

arXiv2007

Local readout enhancement for detuned signal-recycling interferometers

Motivated by the optical-bar scheme of Braginsky, Gorodetsky and Khalili, we propose to add to a high power detuned signal-recycling interferometer a local readout scheme which measures the motion of the arm-cavity front mirror. At low frequencies this mirror moves together with the arm-cavity end mirror, under the influence of gravitational waves. This scheme improves the low-frequency quantum-noise-limited sensitivity of optical-spring interferometers significantly and can be considered as a incorporation of the optical-bar scheme into currently planned second-generation interferometers. On the other hand it can be regarded as an extension of the optical bar scheme. Taking compact-binary inspiral signals as an example, we illustrate how this scheme can be used to improve the sensitivity of the planned Advanced LIGO interferometer, in various scenarios, using a realistic classical-noise budget. We also discuss how this scheme can be implemented in Advanced LIGO with relative ease.

gr-qc↗

arXiv2007

Demonstration of displacement- and frequency-noise free laser interferometry using bi-directional Mach-Zehnder interferometers

We have demonstrated displacement- and frequency-noise free laser interferometry (DFI) by partially implementing a recently proposed optical configuration using bi-directional Mach-Zehnder interferometers (MZI). This partial implementation, the minimum necessary to be called DFI, has confirmed the essential feature of DFI: the combination of two MZI signals can be carried out in a way which cancels displacement noise of the mirrors while maintaining gravitational wave signals. The attained maximum displacement noise suppression allowed a simulated-SNR of 45dB.

gr-qc↗

arXiv2007

Isolation of gravitational waves from displacement noise and utility of a time-delay device

Interferometers with kilometer-scale arms have been built for gravitational-wave detections on the ground; ones with much longer arms are being planned for space-based detection. One fundamental motivation for long baseline interferometry is from displacement noise. In general, the longer the arm length L, the larger the motion the gravitational-wave induces on the test masses, until L becomes comparable to the gravitational wavelength. Recently, schemes have been invented, in which displacement noises can be evaded by employing differences between the influence of test-mass motions and that of gravitational waves on light propagation. However, in these schemes, such differences only becomes significant when L approaches the gravitational wavelength, and shot-noise limited sensitivity becomes worse than that of conventional configurations by a factor of at least (f L/c)^(-2), for f<c/L. Such a factor, although can be overcome theoretically by employing high optical powers, makes these schemes quite impractical. In this paper, we explore the use of time delay in displacement-noise-free interferometers, which can improve their shot-noise-limited sensitivity at low frequencies, to a factor of (f L/c)^(-1) of the shot-noise-limited sensitivity of conventional configurations.

gr-qc↗

arXiv2006

Extracting Information about EMRIs using Time-Frequency Methods

The inspirals of stellar-mass compact objects into supermassive black holes are some of the most exciting sources of gravitational waves for LISA. Detection of these sources using fully coherent matched filtering is computationally intractable, so alternative approaches are required. In Wen & Gair (2005), we proposed a detection method based on searching for significant deviation of power density from noise in a time-frequency spectrogram of the LISA data. The performance of the algorithm was assessed in Gair & Wen (2005) using Monte-Carlo simulations on several trial waveforms and approximations to the noise statistics. We found that typical extreme mass ratio inspirals (EMRIs) could be detected at distances of up to 1-3 Gpc, depending on the source parameters. In this paper, we first give an overview of our previous work in Wen & Gair (2005) and Gair & Wen (2005), and discuss the performance of the method in a broad sense. We then introduce a decomposition method for LISA data that decodes LISA's directional sensitivity. This decomposition method could be used to improve the detection efficiency, to extract the source waveform, and to help solve the source confusion problem. Our approach to constraining EMRI parameters using the output from the time-frequency method will be outlined.

gr-qc↗

arXiv2006

Detection template families for gravitational waves from the final stages of binary--black-hole inspirals: Nonspinning case

We investigate the problem of detecting gravitational waves from binaries of nonspinning black holes with masses m = 5--20 Msun, moving on quasicircular orbits, which are arguably the most promising sources for first-generation ground-based detectors. We analyze and compare all the currently available post--Newtonian approximations for the relativistic two-body dynamics; for these binaries, different approximations predict different waveforms. We then construct examples of detection template families that embed all the approximate models, and that could be used to detect the true gravitational-wave signal (but not to characterize accurately its physical parameters). We estimate that the fitting factor for our detection families is >~0.95 (corresponding to an event-rate loss <~15%) and we estimate that the discretization of the template family, for ~10^4 templates, increases the loss to <~20%.

gr-qc↗

arXiv2006

Detecting gravitational waves from precessing binaries of spinning compact objects: Adiabatic limit

Black-hole (BH) binaries with single-BH masses m=5--20 Msun, moving on quasicircular orbits, are among the most promising sources for first-generation ground-based gravitational-wave (GW) detectors. Until now, the development of data-analysis techniques to detect GWs from these sources has been focused mostly on nonspinning BHs. The data-analysis problem for the spinning case is complicated by the necessity to model the precession-induced modulations of the GW signal, and by the large number of parameters needed to characterize the system, including the initial directions of the spins, and the position and orientation of the binary with respect to the GW detector. In this paper we consider binaries of maximally spinning BHs, and we work in the adiabatic-inspiral regime to build families of modulated detection templates that (i) are functions of very few physical and phenomenological parameters, (ii) model remarkably well the dynamical and precessional effects on the GW signal, with fitting factors on average >~ 0.97, but (iii) might require increasing the detection thresholds, offsetting at least partially the gains in the fitting factors. Our detection-template families are quite promising also for the case of neutron-star--black-hole binaries, with fitting factors on average ~ 0.93. For these binaries we also suggest (but do not test) a further template family, which would produce essentially exact waveforms written directly in terms of the physical spin parameters.

gr-qc↗

arXiv2006

A physical template family for gravitational waves from precessing binaries of spinning compact objects: Application to single-spin binaries

The detection of the gravitational waves (GWs) emitted by precessing binaries of spinning compact objects is complicated by the large number of parameters (such as the magnitudes and initial directions of the spins, and the position and orientation of the binary with respect to the detector) that are required to model accurately the precession-induced modulations of the GW signal. In this paper we describe a fast matched-filtering search scheme for precessing binaries, and we adopt the physical template family proposed by Buonanno, Chen, and Vallisneri [Phys.Rev.D 67, 104025 (2003)] for ground-based interferometers. This family provides essentially exact waveforms, written directly in terms of the physical parameters, for binaries with a single significant spin, and for which the observed GW signal is emitted during the phase of adiabatic inspiral (for LIGO-I and VIRGO, this corresponds to a total mass M < 15Msun). We show how the detection statistic can be maximized automatically over all the parameters (including the position and orientation of the binary with respect to the detector), except four (the two masses, the magnitude of the single spin, and the opening angle between the spin and the orbital angular momentum), so the template bank used in the search is only four-dimensional; this technique is relevant also to the searches for GW from extreme--mass-ratio inspirals and supermassive blackhole inspirals to be performed using the space-borne detector LISA. Using the LIGO-I design sensitivity, we compute the detection threshold (~10) required for a false-alarm probability of 10^(-3)/year, and the number of templates (~76,000) required for a minimum match of 0.97, for the mass range (m1,m2)=[7,12]Msun*[1,3]Msun.

gr-qc↗

arXiv2006

A quasi-physical family of gravity-wave templates for precessing binaries of spinning compact objects: Application to double-spin precessing binaries

The gravitational waveforms emitted during the adiabatic inspiral of precessing binaries with two spinning compact bodies of comparable masses, evaluated within the post-Newtonian approximation, can be reproduced rather accurately by the waveforms obtained by setting one of the two spins to zero, at least for the purpose of detection by ground-based gravitational-wave interferometers. Here we propose to use this quasi-physical family of single-spin templates to search for the signals emitted by double-spin precessing binaries, and we find that its signal-matching performance is satisfactory for source masses (m1,m2) in [3,15]Msun x [3,15]Msun. For this mass range, using the LIGO-I design sensitivity, we estimate that the number of templates required to yield a minimum match of 0.97 is ~320,000. We discuss also the accuracy to which the single-spin template family can be used to estimate the parameters of the original double-spin precessing binaries.

gr-qc↗

arXiv2006

Probing Spacetime Foam with Photons: Suppression of Observable Effects due to Uncertainty in Optical Paths

It was recently proposed to use extra-galactic point sources to constrain space-time quantum fluctuations in the universe. In these proposals, the fundamental "fuzziness" of distance caused by space-time quantum fluctuations have been directly identified with fluctuations in optical paths. Phase-front corrugations deduced from these optical-path fluctuations are then applied to light from extragalactic point sources, and used to constrain various models of quantum gravity. In particular, the so-called random-walk model has been claimed to be ruled out by existing astrophysical observations from the Hubble Space Telescope. However, when a photon propagates in three spatial dimensions, it does not follow a specific ray, but would rather sample a finite, three-dimensional region around that ray -- thereby averaging over space-time quantum fluctuations all through that region. We use a simple, random-walk type model to demonstrate that, once the appropriate wave optics is applied, the averaging of neighboring space-time fluctuations will cause much less distortions on the phase front. In our model, the extra suppression factor due to diffraction is (Planck Length)/(Wavelength), which is at least 19 orders of magnitude for astronomical observations.

gr-qc↗

arXiv2006

Interferometers for Displacement-Noise-Free Gravitational-Wave Detection

We propose a class of displacement- and laser-noise free gravitational-wave-interferometer configurations, which does not sense non-geodesic mirror motions and laser noises, but provides non-vanishing gravitational-wave signal. Our interferometer consists of 4 mirrors and 2 beamsplitters, which form 4 Mach-Zehnder interferometers. By contrast to previous works, no composite mirrors are required. Each mirror in our configuration is sensed redundantly, by at least two pairs of incident and reflected beams. Displacement- and laser-noise free detection is achieved when output signals from these 4 interferometers are combined appropriately. Our 3-dimensional interferometer configuration has a low-frequency response proportional to f^2, which is better than the f^3 achievable by previous 2-dimensional configurations.

gr-qc↗

arXiv2006

Displacement- and Timing-Noise Free Gravitational-Wave Detection

Motivated by a recently-invented scheme of displacement-noise-free gravitational-wave detection, we demonstrate the existence of gravitational-wave detection schemes insusceptible to both displacement and timing (laser) noises, and are thus realizable by shot-noise-limited laser interferometry. This is possible due to two reasons: first, gravitational waves and displacement disturbances contribute to light propagation times in different manners; second, for an N-detector system, the number of signal channels is of the order O(N^2), while the total number of timing- and displacement-noise channels is of the order O(N).

gr-qc↗

arXiv2005

Detecting gravitational waves from precessing binaries of spinning compact objects. II. Search implementation for low-mass binaries

Detection template families (DTFs) are built to capture the essential features of true gravitational waveforms using a small set of phenomenological waveform parameters. Buonanno, Chen, and Vallisneri [Phys. Rev. D 67, 104025 (2003)] proposed the ``BCV2'' DTF to perform computationally efficient searches for signals from precessing binaries of compact stellar objects. Here we test the signal-matching performance of the BCV2 DTF for asymmetric--mass-ratio binaries, and specifically for double--black-hole binaries with component masses (m1,m2): (6~12Msun, 1~3Msun), and for black-hole--neutron-star binaries with component masses (m1,m2) = (10Msun, 1.4Msun); we take all black holes to be maximally spinning. We find a satisfactory signal-matching performance, with fitting factors averaging between 0.94 and 0.98. We also scope out the region of BCV2 parameters needed for a template-based search, we evaluate the template match metric, we discuss a template-placement strategy, and we estimate the number of templates needed for searches at the LIGO design sensitivity. In addition, after gaining more insight in the dynamics of spin--orbit precession, we propose a modification of the BCV2 DTF that is parametrized by physical (rather than phenomenological) parameters. We test this modified ``BCV2P'' DTF for the (10Msun, 1.4Msun) black-hole--neutron-star system, finding a signal-matching performance comparable to the BCV2 DTF, and a reliable parameter-estimation capability for target-binary quantities such as the chirp mass and the opening angle (the angle between the black-hole spin and the orbital angular momentum).

gr-qc↗

arXiv2005

Transition from inspiral to plunge in precessing binaries of spinning black holes

We investigate the non-adiabatic dynamics of spinning black hole binaries by using an analytical Hamiltonian completed with a radiation-reaction force, containing spin couplings, which matches the known rates of energy and angular momentum losses on quasi-circular orbits. We consider both a straightforward post-Newtonian-expanded Hamiltonian (including spin-dependent terms), and a version of the resummed post-Newtonian Hamiltonian defined by the Effective One-Body approach. We focus on the influence of spin terms onto the dynamics and waveforms. We evaluate the energy and angular momentum released during the final stage of inspiral and plunge. For an equal-mass binary the energy released between 40Hz and the frequency beyond which our analytical treatment becomes unreliable is found to be, when using the more reliable Effective One-Body dynamics: 0.6% M for anti-aligned maximally spinning black holes, 5% M for aligned maximally spinning black hole, and 1.8% M for non-spinning configurations. In confirmation of previous results, we find that, for all binaries considered, the dimensionless rotation parameter J/E^2 is always smaller than unity at the end of the inspiral, so that a Kerr black hole can form right after the inspiral phase. By matching a quasi-normal mode ringdown to the last reliable stages of the plunge, we construct complete waveforms approximately describing the gravitational wave signal emitted by the entire process of coalescence of precessing binaries of spinning black holes.

gr-qc↗

arXiv2005

Displacement-Noise-Free Gravitational-Wave Detection

We present a new idea that allows us to detect gravitational waves without being disturbed by any kind of displacement noise, based on the fact that gravitational waves and test-mass motions affect the propagations of light differently. We demonstrate this idea by analyzing a simple toy model consisting three equally-separated objects on a line. By taking a certain combination of light travel times between these objects, we construct an observable free from the displacement of each object which has a reasonable sensitivity to gravitational waves.

gr-qc↗

arXiv2005

Mathematical framework for simulation of quantum fields in complex interferometers using the two-photon formalism

We present a mathematical framework for simulation of optical fields in complex gravitational-wave interferometers. The simulation framework uses the two-photon formalism for optical fields and includes radiation pressure effects, an important addition required for simulating signal and noise fields in next-generation interferometers with high circulating power. We present a comparison of results from the simulation with analytical calculation and show that accurate agreement is achieved.

quant-ph↗