arXiv subjects

Yan Li

Publications and source records attributed to Yan Li.

At least 343 records · Page 19Linked to original sources

arXiv2024

Convective Mixing: The Formation Channel of Li-rich Giants

Increasing observed data indicate that part of giants has abnormally high lithium (Li) inside their surface, and their proportion is around 1%. Instead of pursuing the feasible mechanisms for extra Li enrichment, we focus on how to inhibit Li depletion from the main sequence (MS) phase of giants. With this in mind, we find that convective mixing is capable of achieving this goal and forming Li-rich giants, which is mainly attributed to the convection model with the convective boundary defined by the Ledoux criterion. Another factor in the formation of Li-rich giants in our convection models is related to the Li abundances of their progenitors. If the Li abundances of the progenitors exceed the meteoritic value (3.3 dex), then the majority of giants will be rich in Li. This is the general pattern of stellar Li abundance evolution without factoring in extra Li depletion. We propose that other Li depletion processes should also be adopted in the future, as they may be the key to the 1% puzzle.

astro-ph.SR↗

arXiv2024

Narrowband telecom band polarization-entangled photon source by superposed monolithic cavities

A high-quality narrowband polarization-entangled source in the telecom band is preferred to avoid frequency dispersion for long-distance transmission in optical fibers and to efficiently couple with telecom band quantum memories. Here, we report narrowband, telecom-band, polarization-entangled photon pair generation based on the superposition of single-longitudinal-mode photon pairs from two monolithic nonlinear crystal cavities in a passively stable interferometer based on beam displacers. The photon pairs generated from the cavities exhibit a high coincidence to accidental coincidence ratio of 20000 and a bandwidth below 500 MHz. Two-photon polarization interference, Bell-inequality, and quantum state tomography are performed to indicate the high quality of the entangled source. The current configuration demonstrates greater stability than traditional free space cavity-enhanced polarization-entangled state generation, which is promising for quantum communication applications.

quant-ph↗

arXiv2024

One for Multiple: Physics-informed Synthetic Data Boosts Generalizable Deep Learning for Fast MRI Reconstruction

Magnetic resonance imaging (MRI) is a widely used radiological modality renowned for its radiation-free, comprehensive insights into the human body, facilitating medical diagnoses. However, the drawback of prolonged scan times hinders its accessibility. The k-space undersampling offers a solution, yet the resultant artifacts necessitate meticulous removal during image reconstruction. Although Deep Learning (DL) has proven effective for fast MRI image reconstruction, its broader applicability across various imaging scenarios has been constrained. Challenges include the high cost and privacy restrictions associated with acquiring large-scale, diverse training data, coupled with the inherent difficulty of addressing mismatches between training and target data in existing DL methodologies. Here, we present a novel Physics-Informed Synthetic data learning framework for Fast MRI, called PISF. PISF marks a breakthrough by enabling generalized DL for multi-scenario MRI reconstruction through a single trained model. Our approach separates the reconstruction of a 2D image into many 1D basic problems, commencing with 1D data synthesis to facilitate generalization. We demonstrate that training DL models on synthetic data, coupled with enhanced learning techniques, yields in vivo MRI reconstructions comparable to or surpassing those of models trained on matched realistic datasets, reducing the reliance on real-world MRI data by up to 96%. Additionally, PISF exhibits remarkable generalizability across multiple vendors and imaging centers. Its adaptability to diverse patient populations has been validated through evaluations by ten experienced medical professionals. PISF presents a feasible and cost-effective way to significantly boost the widespread adoption of DL in various fast MRI applications.

eess.IV↗

arXiv2024

Expansion dynamics of Bose-Einstein condensates in a synthetic magnetic field

We investigate the expansion dynamics of spin-orbit-coupled Bose-Einstein condensates subjected to a synthetic magnetic field, after their release from an external harmonic trap. Our findings reveal that the condensate experiences a spin-dependent rotation and separation due to the rigid-like rotational velocity field, which leads to a spin density deflection. The deflection angle reaches a peak at a time that is inversely related to the frequency of the harmonic trap. When the detuning gradient is below a critical value for vortex nucleation, our analytical results derived from a spinor hydrodynamic theory align closely with numerical results using the coupled Gross-Pitaevskii equations. Beyond this critical value, we also numerically simulated the expansion dynamics of the condensates containing vortices with negative circulation. Our findings highlight the pivotal role of the rigid-like rotational velocity field on the dynamics of the condensate and may stimulate further experimental investigations into the rich superfluid dynamics induced by synthetic magnetic fields.

cond-mat.quant-gas↗

arXiv2024

Divide-Conquer-and-Merge: Memory- and Time-Efficient Holographic Displays

Recently, deep learning-based computer-generated holography (CGH) has demonstrated tremendous potential in three-dimensional (3D) displays and yielded impressive display quality. However, most existing deep learning-based CGH techniques can only generate holograms of 1080p resolution, which is far from the ultra-high resolution (16K+) required for practical virtual reality (VR) and augmented reality (AR) applications to support a wide field of view and large eye box. One of the major obstacles in current CGH frameworks lies in the limited memory available on consumer-grade GPUs which could not facilitate the generation of higher-definition holograms. To overcome the aforementioned challenge, we proposed a divide-conquer-and-merge strategy to address the memory and computational capacity scarcity in ultra-high-definition CGH generation. This algorithm empowers existing CGH frameworks to synthesize higher-definition holograms at a faster speed while maintaining high-fidelity image display quality. Both simulations and experiments were conducted to demonstrate the capabilities of the proposed framework. By integrating our strategy into HoloNet and CCNNs, we achieved significant reductions in GPU memory usage during the training period by 64.3\% and 12.9\%, respectively. Furthermore, we observed substantial speed improvements in hologram generation, with an acceleration of up to 3$\times$ and 2 $\times$, respectively. Particularly, we successfully trained and inferred 8K definition holograms on an NVIDIA GeForce RTX 3090 GPU for the first time in simulations. Furthermore, we conducted full-color optical experiments to verify the effectiveness of our method. We believe our strategy can provide a novel approach for memory- and time-efficient holographic displays.

eess.IV↗

arXiv2024

Variational structure and two-dimensional subsonic jet flows for compressible Euler system with general incoming flows

In this paper, we proved the well-posedness theory of compressible subsonic jet flows for two-dimensional steady Euler system with {\it general} incoming horizontal velocity as long as the flux is larger than a critical value. One of the key observations is that the stream function formulation for two-dimensional compressible steady Euler system enjoys a variational structure even when the flows have nontrivial vorticity, so that the jet problem can be reformulated as a domain variation problem. This variational structure helps to adapt the framework developed by Alt, Caffarelli, and Friedman to study {the jet problem, which is a Bernoulli type free boundary problem. A major technical point to analyze the jet flows is that the inhomogeneous terms in the rescaled equation near the free boundary are always small, even when the vorticity of the flows is big.

math.AP↗

arXiv2024

Interpretable Short-Term Load Forecasting via Multi-Scale Temporal Decomposition

Rapid progress in machine learning and deep learning has enabled a wide range of applications in the electricity load forecasting of power systems, for instance, univariate and multivariate short-term load forecasting. Though the strong capabilities of learning the non-linearity of the load patterns and the high prediction accuracy have been achieved, the interpretability of typical deep learning models for electricity load forecasting is less studied. This paper proposes an interpretable deep learning method, which learns a linear combination of neural networks that each attends to an input time feature. We also proposed a multi-scale time series decomposition method to deal with the complex time patterns. Case studies have been carried out on the Belgium central grid load dataset and the proposed model demonstrated better accuracy compared to the frequently applied baseline model. Specifically, the proposed multi-scale temporal decomposition achieves the best MSE, MAE and RMSE of 0.52, 0.57 and 0.72 respectively. As for interpretability, on one hand, the proposed method displays generalization capability. On the other hand, it can demonstrate not only the feature but also the temporal interpretability compared to other baseline methods. Besides, the global time feature interpretabilities are also obtained. Obtaining global feature interpretabilities allows us to catch the overall patterns, trends, and cyclicality in load data while also revealing the significance of various time-related features in forming the final outputs.

cs.LG↗

arXiv2024

A Quantum Algorithm Based Heuristic to Hide Sensitive Itemsets

Quantum devices use qubits to represent information, which allows them to exploit important properties from quantum physics, specifically superposition and entanglement. As a result, quantum computers have the potential to outperform the most advanced classical computers. In recent years, quantum algorithms have shown hints of this promise, and many algorithms have been proposed for the quantum domain. There are two key hurdles to solving difficult real-world problems on quantum computers. The first is on the hardware front -- the number of qubits in the most advanced quantum systems is too small to make the solution of large problems practical. The second involves the algorithms themselves -- as quantum computers use qubits, the algorithms that work there are fundamentally different from those that work on traditional computers. As a result of these constraints, research has focused on developing approaches to solve small versions of problems as proofs of concept -- recognizing that it would be possible to scale these up once quantum devices with enough qubits become available. Our objective in this paper is along the same lines. We present a quantum approach to solve a well-studied problem in the context of data sharing. This heuristic uses the well-known Quantum Approximate Optimization Algorithm (QAOA). We present results on experiments involving small datasets to illustrate how the problem could be solved using quantum algorithms. The results show that the method has potential and provide answers close to optimal. At the same time, we realize there are opportunities for improving the method further.

quant-ph↗

arXiv2024

Two high-amplitude $δ$ Scuti-$γ$ Doradus hybrids constrained by the radial fundamental p and equally spaced g modes

Based on 2-minute cadence TESS data, we investigate pulsations of TIC 65138566 and TIC 139729335 and discover them to be two new HADS stars with equally spaced g modes. We recognize the radial fundamental mode $f_1$ = 18.3334 c/d and the first overtone $f_3$ = 23.6429 c/d for TIC 65138566, and identify the highest peak $f_1$ = 19.0955 c/d as the radial fundamental mode for TIC 139729335. For g modes, both stars display a regular period spacing of 2413 s. Through detailed seismological analysis, we deduce that these period spacing patterns correspond to modes with $\ell$ = 1. Moreover, our analysis reveals that with the increase in masses and metallicities, the star should display a higher degree of evolution to match a specific period spacing $Π_0$. Conversely, the star should have a lower extent of evolution to match the radial fundamental mode. These two contradictory behaviors allow us to precisely obtain stellar physical parameters. TIC 65138566 and TIC 139729335 are determined to be two main sequence stars that have almost the same range of masses and metallicities, with $M$ = 1.36 $\pm$ 0.06 $M_{\odot}$ and $Z$ = 0.005 $\pm$ 0.002. The hydrogen abundance in the core of TIC 65138566 is estimated to be about 0.28, while TIC 139729335 has a slightly higher value of around 0.31. Finally, we suggest that the HADS $δ$ Scuti-$γ$ Doradus star TIC 308396022 is a main sequence star with $M$ = 1.54 $\pm$ 0.08 $M_{\odot}$, $Z$ = 0.007 $\pm$ 0.001, and $X_{\rm c}$ = 0.18 $\pm$ 0.02.

astro-ph.SR↗

arXiv2024

Improved modelling of SEP event onset within the WSA-Enlil-SEPMOD framework

Multi-spacecraft observations of solar energetic particle (SEP) events not only enable a deeper understanding and development of particle acceleration and transport theories, but also provide important constraints for model validation efforts. However, because of computational limitations, a given physics-based SEP model is usually best-suited to capture a particular phase of an SEP event, rather than its whole development from onset through decay. For example, magnetohydrodynamic (MHD) models of the heliosphere often incorporate solar transients only at the outer boundary of their so-called coronal domain -- usually set at a heliocentric distance of 20-30 $R_{\odot}$. This means that particle acceleration at CME-driven shocks is also computed from this boundary onwards, leading to simulated SEP event onsets that can be many hours later than observed, since shock waves can form much lower in the solar corona. In this work, we aim to improve the modelled onset of SEP events by inserting a "fixed source" of particle injection at the outer boundary of the coronal domain of the coupled WSA-Enlil 3D MHD model of the heliosphere. The SEP model that we employ for this effort is SEPMOD, a physics-based test-particle code based on a field line tracer and adiabatic invariant conservation. We apply our initial tests and results of SEPMOD's fixed-source option to the 2021 October 9 SEP event, which was detected at five well-separated locations in the inner heliosphere -- Parker Solar Probe, STEREO-A, Solar Orbiter, BepiColombo, and near-Earth spacecraft.

astro-ph.SR↗

arXiv2024

Investigation of two-particle contributions to nucleon matrix elements

We investigate contributions of excited states to nucleon matrix elements by studying the two- and three-point functions using nucleon and pion-nucleon interpolating fields. This study is carried out using twisted mass fermion ensembles with pion masses 346 MeV and 131 MeV. We compare the results obtained using these two ensembles and show preliminary results for nucleon charges.

hep-lat↗

arXiv2023

High-speed impulsive stimulated Brillouin microscopy

Brillouin microscopy, which maps elastic modulus from the frequency shift of scattered light, has evolved to a faster speed for the investigation of rapid biomechanical changes. Impulsive stimulated Brillouin scattering (ISBS) spectroscopy has the potential to speed up measurement through the resonant amplification interaction from pulsed excitation and time-domain continuous detection. However, significant progress has not been achieved due to the limitation in signal-to-noise ratio (SNR) and the corresponding need for excessive averaging to maintain high spectral precision. Moreover, the limited spatial resolution also hinders its application in mechanical imaging. Here, by scrutinizing the SNR model, we design a high-speed ISBS microscope through multi-parameter optimization including phase, reference power, and acquisition time. Leveraging this, with the further assistance of the Matrix Pencil method for data processing, three-dimensional mechanical images are mapped under multiple contrast mechanisms for a millimeter-scale polydimethylsiloxane pattern immersed in methanol, enabling the identification of these two transparent materials without any contact or labeling. Our experimental results demonstrate the capability to maintain high spectral precision and resolution at a sub-millisecond integration time for one pixel. With a two-order improvement in the speed and a tenfold improvement in the spatial resolution over the state-of-the-art systems, this method makes it possible for ISBS microscopes to sensitively investigate rapid mechanical changes in time and space.

physics.optics↗

arXiv2023

Structure responsible for the superconducting state in La3Ni2O7 at high pressure and low temperature conditions

Very recently, a new superconductor with Tc = 80 K was reported in nickelate (La3Ni2O7) at around 15 - 40 GPa conditions (Nature, 621, 493, 2023) [1], which is the second type of unconventional superconductor, beside the cuprates, with Tc above liquid nitrogen temperature. However, the phase diagram plotted in this report was mostly based on the transport measurement at low temperature and high pressure conditions, and the assumed corresponding X-ray diffraction (XRD) results was carried out at room temperature. This encouraged us to carry out in situ high pressure and low temperature synchrotron XRD experiments to determine which phase is responsible for the high Tc state. In addition to the phase transition from orthorhombic Amam structure to orthorhombic Fmmm structure, a tetragonal phase with space group of I4/mmm was discovered when the sample was compressed to 19 GPa at 40 K where the superconductivity takes palce in La3Ni2O7. The calculations based on this tetragonal structure reveal that the electronic states approached to the Fermi energy were mainly dominated by the eg orbitals (3dz2 and 3dx2-y2) of Ni atoms, which are located in the oxygen octahedral crystal field. The correlation between Tc and this structural evolution, especially Ni-O octahedra regularity and the in-plane Ni-O-Ni bonding angles, are analyzed. This work sheds new lights to identify what is the most likely phase responsible for superconductivity in the double layered nickelate.

cond-mat.supr-con↗

arXiv2023

Repetitive nonoverlapping sequential pattern mining

Sequential pattern mining (SPM) is an important branch of knowledge discovery that aims to mine frequent sub-sequences (patterns) in a sequential database. Various SPM methods have been investigated, and most of them are classical SPM methods, since these methods only consider whether or not a given pattern occurs within a sequence. Classical SPM can only find the common features of sequences, but it ignores the number of occurrences of the pattern in each sequence, i.e., the degree of interest of specific users. To solve this problem, this paper addresses the issue of repetitive nonoverlapping sequential pattern (RNP) mining and proposes the RNP-Miner algorithm. To reduce the number of candidate patterns, RNP-Miner adopts an itemset pattern join strategy. To improve the efficiency of support calculation, RNP-Miner utilizes the candidate support calculation algorithm based on the position dictionary. To validate the performance of RNP-Miner, 10 competitive algorithms and 20 sequence databases were selected. The experimental results verify that RNP-Miner outperforms the other algorithms, and using RNPs can achieve a better clustering performance than raw data and classical frequent patterns. All the algorithms were developed using the PyCharm environment and can be downloaded from https://github.com/wuc567/Pattern-Mining/tree/master/RNP-Miner.

cs.DB↗

arXiv2023

A Novel Catalyst Scheme for Stochastic Minimax Optimization

This paper presents a proximal-point-based catalyst scheme for simple first-order methods applied to convex minimization and convex-concave minimax problems. In particular, for smooth and (strongly)-convex minimization problems, the proposed catalyst scheme, instantiated with a simple variant of stochastic gradient method, attains the optimal rate of convergence in terms of both deterministic and stochastic errors. For smooth and strongly-convex-strongly-concave minimax problems, the catalyst scheme attains the optimal rate of convergence for deterministic and stochastic errors up to a logarithmic factor. To the best of our knowledge, this reported convergence seems to be attained for the first time by stochastic first-order methods in the literature. We obtain this result by designing and catalyzing a novel variant of stochastic extragradient method for solving smooth and strongly-monotone variational inequality, which may be of independent interest.

math.OC↗

arXiv2023

Data-integration with pseudoweights and survey-calibration: application to developing US-representative lung cancer risk models for use in screening

Accurate cancer risk estimation is crucial to clinical decision-making, such as identifying high-risk people for screening. However, most existing cancer risk models incorporate data from epidemiologic studies, which usually cannot represent the target population. While population-based health surveys are ideal for making inference to the target population, they typically do not collect time-to-cancer incidence data. Instead, time-to-cancer specific mortality is often readily available on surveys via linkage to vital statistics. We develop calibrated pseudoweighting methods that integrate individual-level data from a cohort and a survey, and summary statistics of cancer incidence from national cancer registries. By leveraging individual-level cancer mortality data in the survey, the proposed methods impute time-to-cancer incidence for survey sample individuals and use survey calibration with auxiliary variables of influence functions generated from Cox regression to improve robustness and efficiency of the inverse-propensity pseudoweighting method in estimating pure risks. We develop a lung cancer incidence pure risk model from the Prostate, Lung, Colorectal, and Ovarian (PLCO) Cancer Screening Trial using our proposed methods by integrating data from the National Health Interview Survey (NHIS) and cancer registries.

stat.ME↗

arXiv2023

Six-degrees-of-freedom test mass readout via optical phase-locking heterodyne interferometry

Accurate position and posture measurements of the freely-falling test mass are crucial for the success of spaceborne gravitational wave detection missions. This paper presents a novel laboratory-developed test mass motion readout that utilizes quadrant photodetectors to measure the translation and tilt of a test mass. Departing from conventional methods like Zeeman effect or AOM frequency shift modulation, the readout system employs the phase locking of two lasers to generate the dual-frequency heterodyne source. Notably, the out-of-loop sensitivity of the phase locking reaches below 30 pm/Hz1/2 within the frequency band of 1 mHz and 10 Hz. The system comprises three measurement interferometers and one reference interferometer, featuring a symmetric design that enables measurements of up to six degrees of freedom based on polarization-multiplexing and differential wavefront sensing. Ground-simulated experimental results demonstrate that the proposed system has achieved a measurement sensitivity of 4 pm/Hz1/2 and 2 nrad/Hz1/2 at 1 Hz, a resolution of 5 nm and 0.1 urad, a range of 200 um and 600 urad, respectively. These findings showcase the system's potential as an alternative method for precisely monitoring the motion of test masses in spaceborne gravitational wave detection missions and other applications requiring accurate positioning and multi-degrees-of-freedom sensing.

astro-ph.IM↗

arXiv2023

KwaiYiiMath: Technical Report

Recent advancements in large language models (LLMs) have demonstrated remarkable abilities in handling a variety of natural language processing (NLP) downstream tasks, even on mathematical tasks requiring multi-step reasoning. In this report, we introduce the KwaiYiiMath which enhances the mathematical reasoning abilities of KwaiYiiBase1, by applying Supervised Fine-Tuning (SFT) and Reinforced Learning from Human Feedback (RLHF), including on both English and Chinese mathematical tasks. Meanwhile, we also constructed a small-scale Chinese primary school mathematics test set (named KMath), consisting of 188 examples to evaluate the correctness of the problem-solving process generated by the models. Empirical studies demonstrate that KwaiYiiMath can achieve state-of-the-art (SOTA) performance on GSM8k, CMath, and KMath compared with the similar size models, respectively.

cs.CL↗