arXiv Science⌕ Search

arXiv subjects

Yalin Liu

Publications and source records attributed to Yalin Liu.

At least 19 recordsLinked to original sources

A Joint LLM and Optimization Agent Solution for Drone Scheduling in Victim Search Missions

Victim search in wilderness areas is time-critical. Drones enable rapid area search, but scheduling them is challenging because victims may continue moving, detection results are uncertain, and effective decisions must combine structured mission information with unstructured contextual clues and domain knowledge. To address this, we propose an agent-aided drone scheduling system. The system employs an agent at the ground control station (GCS) to coordinate multiple drones over successive search cycles. In each cycle, the agent applies a scheduling policy that combines a large language model (LLM) for reasoning about where to search with an optimizer for determining how to dispatch the drones under energy constraints. Simulation results show that the proposed system consistently completes the victim-search mission, whereas none of the six non-LLM baselines does so and direct LLM scheduling is considerably less reliable. The source code is publicly available at https://github.com/1643204431/llm-uav-victim-search.

eess.SY↗

Reliability Analysis for Ground-Air Cooperative Wireless-Powered Internet-of-Things

Battery-constrained Internet of Things (IoT) devices face significant challenges in maintaining long-term uplink data collection, especially in network-limited scenarios. This paper investigates a Ground-Air cooperative Wireless-Powered IoT network (GA-WPIoT), where ground power beacons (GPBs) provide radio-frequency energy supply and unmanned aerial vehicles (UAVs) serve as flexible aerial access points for IoT data collection. Unlike conventional UAV-enabled wireless-powered solutions, GA-WPIoT decouples energy transfer and data collection, reducing the hardware and energy burden of UAVs. To capture the device-level performance variations among IoT devices, we develop a stochastic geometry-based analytical framework, where UAVs are modeled by a Matérn hard-core point process, IoT devices by a Poisson point process, and GPBs by a finite annular binomial point process. The conditional success probabilities of the GPB-device link (for energy transfer) and the device-UAV link (for data collection) are characterized, and device-level reliability distributions are obtained through the Meta-Distribution based analysis. Numerical results under suburban and urban environments reveal the impacts of UAV altitude and annular GPB deployment on reliability distributions, providing useful guidelines for GA-WPIoT.

cs.IT↗

A User-Triggered UAV Dispatching System for Precise and Timely Mountain Search Missions

Smartphones carried by hikers routinely record routes, locations, and requests for assistance, and these records can provide precise clues for mountain search. However, they are rarely transformed in a direct and timely way into unmanned aerial vehicle (UAV) missions that support search and rescue. This paper presents a user-triggered UAV dispatching system that integrates mobile information collection, ground station mission management, and UAV search into a single workflow. In our system, a mobile application is designed to continuously track user records and synchronize these records to the cloud database, thereby initiating all subsequent search events and UAV-dispatch missions. A control platform is developed to retrieve records from the cloud database for operator verification and mission scheduling. A UAV prototype is implemented to execute the approved mission, follow waypoints, report status, relay phone records when available, and record downward-facing video for later inspection. Simulations are conducted for UAV-dispatching missions using a terrain-following flight altitude of $80$~m above ground level and demonstrate successful route generation, ordered waypoint traversal, and return to the launch site for landing of the UAV dispatching. Local software tests verified timeout detection with a 1s threshold and phone-record transfer from the mobile application through the UAV to the ground station. Outdoor trials showed that the UAV could fly autonomously and capture downward-facing imagery in which a person, a nearby footpath, and surrounding vegetation were clearly discernible, providing visual cues for operator assessment and further inspection of the search area.

eess.SY↗

Sky-Ear: An Unmanned Aerial Vehicle-Enabled Victim Sound Detection and Localization System

Unmanned Aerial Vehicles (UAVs) are increasingly deployed in search-and-rescue (SAR) missions, yet continuous and reliable victim detection and localization remain challenging due to on-board hardware constraints. This paper designs an UAV-Enabled Victim Sound Detection and Localization System (called ``Sky-Ear'' for brevity) to achieve energy-efficient acoustic sensing and sound detection for SAR. Sky-Ear enables the ``ear'' of the UAV with a circular-shaped microphone array, and the array conducts continuous audio recordings during the UAV's flight. In Sky-Ear, a two-stage (Sentinel and Responder) audio processing method is developed for energy-consuming and highly reliable sound detection. In the Sentinel stage, a Masking autoencoder (MAE)-based sound detection mechanism is designed to analyze frequency-time acoustic features. For improved precision, a continuous localization method is designed by optimizing detected directions from multiple observations. Extensive simulation experiments are conducted to validate the system's performance in terms of victim detection accuracy and localization error.

eess.AS↗

Sensing-Assisted Anti-Blockage Pinching-Antenna Systems For Indoor Immersive Communications

Indoor immersive communication, empowered by millimeter-wave (mmWave) technologies, is a key enabler for 6G-ready Extended Reality (XR) applications. However, mmWave signals are highly susceptible to dynamic obstacles (e.g., moving humans), leading to frequent line-of-sight (LoS) blockages. Moreover, although massive-antenna systems have been widely adopted indoors, their fixed-site deployment limits their effectiveness in wide and dynamic indoor environments such as factories and offices. To address these challenges, we present a sensing-assisted anti-blockage Pinching-Antenna Systems (PASS) solution for indoor immersive communications. By mechanically moving a pinching antenna (PA) along a dielectric waveguide, PASS can flexibly extend the service coverage and re-establish LoS links in wide indoor scenarios. Besides, our solution integrates sensing capabilities into PASS, where the PA executes controlled micro-movements to transmit and receive chirp radar signals, enabling real-time sensing of obstacles. Based on the sensing results, we design an anti-blockage PA movement strategy that detects blocked regions along the waveguide and proactively moves the PA to safe zones. Accordingly, the whole system performs a cycled "sensing-movement-communication" workflow with each cycle completed in a limited frame to ensure both timely sensing and communication. To ensure system efficiency, a closed-form pre-optimized solution of sensing parameters is derived under practical mechanical and sensing constraints. Extensive experiments show that our solution reduces blockage-induced outages to near-zero while sustaining the effective throughput required by indoor immersive applications.

eess.SP↗

A Preliminary Study on Explaining Risk of Code Changes using LLM-Based Prediction Models

Predictions by machine learning (ML) and artificial intelligence (AI) models are often received skeptically unless they are paired with intelligible explanations. In the context of just-in-time defect prediction, highlighting small portions of a software change (diff) -- beyond rule-based lints -- where risk may be concentrated has not yet been extensively investigated. In this work, we leverage attention weights from an LLM-based Diff Risk Score (DRS) model to highlight parts of a diff that the model focuses on when predicting risk. We aggregate token-level attention into interpretable code units (lines, hunks, and files), and present the top-K units to developers as a lightweight form of guidance during code review. We evaluate our approach using expert-labeled changes that have caused real outages. Results show that the highlighted snippets cover expert-labeled outage-causing change lines 53.85% of the time when highlighting the top-2 hunks, while requiring developers to review 26.28% of the changed lines on average. Because attention is produced during standard model inference, the approach is scalable for large development workflows and can be surfaced in the code review UI with low additional latency.

cs.SE↗

FedBiCross: Personalized One-Shot Federated Learning on Medical Images

Data-free knowledge distillation-based one-shot federated learning (OSFL) trains a model in a single communication round without sharing raw data, making OSFL attractive for privacy-sensitive medical applications. However, existing methods aggregate predictions from all clients to form a global teacher. Under non-IID data, conflicting predictions dilute each other during averaging, yielding less informative soft labels that weaken distillation. We propose FedBiCross, a personalized OSFL framework with three stages: (1) clustering clients by model output similarity to form coherent sub-ensembles, (2) bi-level cross-cluster optimization that learns adaptive weights to selectively leverage beneficial cross-cluster knowledge while suppressing negative transfer, and (3) personalized distillation for client-specific adaptation. Experiments on four medical image datasets demonstrate that FedBiCross consistently outperforms state-of-the-art baselines across different non-IID degrees.

cs.LG↗

Augmented Set-membership Affine Projection Algorithm and Its Performance Analysis

The augmented affine projection algorithm (AAPA) has considerably excellent performance for highly colored input signals. However, the direct matrix inversion operation leads to a high computational complexity, especially with high projection order. Inspired by the excellent characteristics of set-membership filtering (SMF), this paper proposes the augmented set-membership affine projection algorithm (ASM-APA), which not only has low computational complexity but also offers improved performance compared with AAPA. Then, the computational complexity and stability of ASM-APA are analyzed, and the condition for maintaining the stability of the algorithm is provided. Finally, in the computer simulation phase, the results of the simulation experiments demonstrated that ASM-APA has superior performance compared to AAPA.

eess.SP↗

Multi-Waveguide Pinching Antenna Placement Optimization for Rate Maximization

Pinching antenna systems (PASS) have emerged as a technology that enables the large-scale movement of antenna elements, offering significant potential for performance gains in next-generation wireless networks. This paper investigates the problem of maximizing the average per-user data rate by optimizing the antenna placement of a multi-waveguide PASS, subject to a stringent physical minimum spacing constraint. To address this complex challenge, which involves a coupled fractional objective and a non-convex constraint, we employ the fractional programming (FP) framework to transform the non-convex rate maximization problem into a more tractable one, and devise a projected gradient ascent (PGA)-based algorithm to iteratively solve the transformed problem. Simulation results demonstrate that our proposed scheme significantly outperforms various geometric placement baselines, achieving superior per-user data rates by actively mitigating multi-user interference.

eess.SP↗

Content-Aware RSMA-Enabled Pinching-Antenna Systems for Latency Optimization in 6G Networks

The Pinching Antenna System (PAS) has emerged as a promising technology to dynamically reconfigure wireless propagation environments in 6G networks. By activating radiating elements at arbitrary positions along a dielectric waveguide, PAS can establish strong line-of-sight (LoS) links with users, significantly enhancing channel gain and deployment flexibility, particularly in high-frequency bands susceptible to severe path loss. To further improve multi-user performance, this paper introduces a novel content-aware transmission framework that integrates PAS with rate-splitting multiple access (RSMA). Unlike conventional RSMA, the proposed RSMA scheme enables users requesting the same content to share a unified private stream, thereby mitigating inter-user interference and reducing power fragmentation. We formulate a joint optimization problem aimed at minimizing the average system latency by dynamically adapting both antenna positioning and RSMA parameters according to channel conditions and user requests. A Content-Aware RSMA and Pinching-antenna Joint Optimization (CARP-JO) algorithm is developed, which decomposes the non-convex problem into tractable subproblems solved via bisection search, convex programming, and golden-section search. Simulation results demonstrate that the proposed CARP-JO scheme consistently outperforms Traditional RSMA, NOMA, and Fixed-antenna systems across diverse network scenarios in terms of latency, underscoring the effectiveness of co-designing physical-layer reconfigurability with intelligent communication strategies.

eess.SP↗

Uplink Rate Maximization for Pinching Antenna- Assisted Covert Backscatter Communication

The emerging pinching antenna (PA) technology enables flexible antenna positioning for creating line-of-sight (LoS) links, thus offering substantial potential to facilitate ambient signal-based backscatter communication (BSC). This paper investigates PA-assisted BSC for enhanced communication and covertness in the presence of a randomly distributed eavesdropper. An optimization problem is formulated to maximize the uplink covert transmission rate by jointly optimizing the transmit power and antenna positions while satisfying both communication reliability and covertness constraints. An alternative optimization (AO)-based framework is proposed to solve this problem. Numerical results demonstrate that the proposed PA-BSC effectively mitigates the double near-far problem, where energy harvesting and backscatter transmission degrade simultaneously due to distance disparities, thereby improving downlink energy harvesting and uplink data transmission while maintaining covertness performance under practical deployment scenarios.

eess.SP↗

A Confidence-Constrained Cloud-Edge Collaborative Framework for Autism Spectrum Disorder Diagnosis

Autism Spectrum Disorder (ASD) diagnosis systems in school environments increasingly relies on IoT-enabled cameras, yet pure cloud processing raises privacy and latency concerns while pure edge inference suffers from limited accuracy. We propose Confidence-Constrained Cloud-Edge Knowledge Distillation (C3EKD), a hierarchical framework that performs most inference at the edge and selectively uploads only low-confidence samples to the cloud. The cloud produces temperature-scaled soft labels and distils them back to edge models via a global loss aggregated across participating schools, improving generalization without centralizing raw data. On two public ASD facial-image datasets, the proposed framework achieves a superior accuracy of 87.4\%, demonstrating its potential for scalable deployment in real-world applications.

cs.NI↗

Cloud-Fog-Edge Collaborative Computing for Sequential MIoT Workflow: A Two-Tier DDPG-Based Scheduling Framework

The Medical Internet of Things (MIoT) demands stringent end-to-end latency guarantees for sequential healthcare workflows deployed over heterogeneous cloud-fog-edge infrastructures. Scheduling these sequential workflows to minimize makespan is an NP-hard problem. To tackle this challenge, we propose a Two-tier DDPG-based scheduling framework that decomposes the scheduling decision into a hierarchical process: a global controller performs layer selection (edge, fog, or cloud), while specialized local controllers handle node assignment within the chosen layer. The primary optimization objective is the minimization of the workflow makespan. Experiments results validate our approach, demonstrating increasingly superior performance over baselines as workflow complexity rises. This trend highlights the frameworks ability to learn effective long-term strategies, which is critical for complex, large-scale MIoT scheduling scenarios.

cs.LG↗

Hybrid Satellite-Ground Deployments for Web3 DID: System Design and Performance Analysis

The emerging Web3 has great potential to provide worldwide decentralized services powered by global-range data-driven networks in the future. To ensure the security of Web3 services among diverse user entities, a decentralized identity (DID) system is essential. Especially, a user's access request to Web3 services can be treated as a DID transaction within the blockchain, executed through a consensus mechanism. However, a critical implementation issue arises in the current Web3, i.e., how to deploy network nodes to serve users on a global scale. To address this issue, emerging Low Earth Orbit (LEO) satellite communication systems, such as Starlink, offer a promising solution. With their global coverage and high reliability, these communication satellites can complement terrestrial networks as Web3 deployment infrastructures. In this case, this paper develops three hybrid satellite-ground modes to deploy the blockchain-enabled DID system for Web3 users. Three modes integrate ground nodes and satellites to provide flexible and continuous DID services for worldwide users. Meanwhile, to evaluate the effectiveness of the present hybrid deployment modes, we analyze the complete DID consensus performance of blockchain on three hybrid satellite-ground modes. Moreover, we conduct numerical and simulation experiments to verify the effectiveness of three hybrid satellite-ground modes. The impacts of various system parameters are thoroughly analyzed, providing valuable insights for implementing the worldwide Web3 DID system in real-world network environments.

eess.SY↗

Pinching-Antenna Systems For Indoor Immersive Communications: A 3D-Modeling Based Performance Analysis

The emerging pinching antenna (PA) technology has high flexibility to reconfigure wireless channels and combat line-of-sight blockage, thus holding transformative potential for indoor immersive applications in 6G. This paper investigates Pinching-antenna systems (PASS) for indoor immersive communications. Our contributions are threefold: (1) we construct a 3D model to characterize the distribution of users, waveguides, and PAs in the PASS; (2) we develop a general theoretical model on downlink performance of PASS by capturing PA-user relationships and system parameters' impacts; and (3) we conduct comprehensive numerical results of the theoretical model and provide implementation guidelines for PASS deployments.

cs.PF↗

Unified Network Modeling for Six Cross-Layer Scenarios in Space-Air-Ground Integrated Networks

The space-air-ground integrated network (SAGIN) can enable global range and seamless coverage in the future network. SAGINs consist of three spatial layer network nodes: 1) satellites on the space layer, 2) aerial vehicles on the aerial layer, and 3) ground devices on the ground layer. Data transmissions in SAGINs include six unique cross-spatial-layer scenarios, i.e., three uplink and three downlink transmissions across three spatial layers. For simplicity, we call them \textit{six cross-layer scenarios}. Considering the diverse cross-layer scenarios, it is crucial to conduct a unified network modeling regarding node coverage and distributions in all scenarios. To achieve this goal, we develop a unified modeling approach of coverage regions for all six cross-layer scenarios. Given a receiver in each scenario, its coverage region on a transmitter-distributed surface is modeled as a spherical dome. Utilizing spherical geometry, the analytical models of the spherical-dome coverage regions are derived and unified for six cross-layer scenarios. We conduct extensive numerical results to examine the coverage models under varying carrier frequencies, receiver elevation angles, and transceivers' altitudes. Based on the coverage model, we develop an algorithm to generate node distributions under spherical coverage regions, which can assist in testing SAGINs before practical implementations.

eess.SY↗

Enhancing Mobile Crowdsensing Efficiency: A Coverage-aware Resource Allocation Approach

In this study, we investigate the resource management challenges in next-generation mobile crowdsensing networks with the goal of minimizing task completion latency while ensuring coverage performance, i.e., an essential metric to ensure comprehensive data collection across the monitored area, yet it has been commonly overlooked in existing studies. To this end, we formulate a weighted latency and coverage gap minimization problem via jointly optimizing user selection, subchannel allocation, and sensing task allocation. The formulated minimization problem is a non-convex mixed-integer programming issue. To facilitate the analysis, we decompose the original optimization problem into two subproblems. One focuses on optimizing sensing task and subband allocation under fixed sensing user selection, which is optimally solved by the Hungarian algorithm via problem reformulation. Building upon these findings, we introduce a time-efficient two-sided swapping method to refine the scheduled user set and enhance system performance. Extensive numerical results demonstrate the effectiveness of our proposed approach compared to various benchmark strategies.

cs.NI↗

3D Stochastic Geometry Model for Aerial Vehicle-Relayed Ground-Air-Satellite Connectivity

Due to their flexibility, aerial vehicles (AVs), such as unmanned aerial vehicles and airships, are widely employed as relays to assist communications between massive ground users (GUs) and satellites, forming an AV-relayed ground-air-satellite solution (GASS). In GASS, the deployment of AVs is crucial to ensure overall performance from GUs to satellites. This paper develops a stochastic geometry-based analytical model for GASS under Matern hard-core point process (MHCPP) distributed AVs. The 3D distributions of AVs and GUs are modeled by considering their locations on spherical surfaces in the presence of high-altitude satellites. Accordingly, we derive an overall connectivity analytical model for GASS, which includes the average performance of AV-relayed two-hop transmissions. Extensive numerical results validate the accuracy of the connectivity model and provide essential insights for configuring AV deployments.

math.NA↗