arXiv subjects

Y. Colombe

Publications and source records attributed to Y. Colombe.

14 recordsLinked to original sources

arXiv2026

Demonstration of a Multiplexing Trapped Ion Quantum Processing Unit

A fault-tolerant quantum computer is expected to require thousands of qubits. Trapped ion architectures provide a modular approach where the quantum register is divided into multiple subregisters connected by physically moving the corresponding ions. Transporting ions at scale comes with several challenges such as the need to connect thousands of control lines to an ion trap chip. Multiplexing the required control voltages from few input signals to multiple electrodes offers a solution to this wiring challenge. Here we demonstrate a quantum processing unit that combines a surface ion trap with a time multiplexer via a sample-and-hold technique that initially charges electrodes to fixed voltages and disconnects them during qubit operations. We characterize the unit's performance by measuring motional heating rates below one phonon per second in both open and closed switch configurations. We further characterize the sample and hold process and find that sampling intervals below 50 ms are sufficient to keep expected gate errors from decaying charges during the hold phase below $10^{-4}$. Our results indicate that the multiplexing scheme is compatible with high-fidelity operations.

quant-ph↗

arXiv2022

Industrially Microfabricated Ion Trap with 1 eV Trap Depth

Scaling trapped-ion quantum computing will require robust trapping of at least hundreds of ions over long periods, while increasing the complexity and functionality of the trap itself. Symmetric 3D structures enable high trap depth, but microfabrication techniques are generally better suited to planar structures that produce less ideal conditions for trapping. We present an ion trap fabricated on stacked 8-inch wafers in a large-scale MEMS microfabrication process that provides reproducible traps at a large volume. Electrodes are patterned on the surfaces of two opposing wafers bonded to a spacer, forming a 3D structure with 2.5 micrometer standard deviation in alignment across the stack. We implement a design achieving a trap depth of 1 eV for a calcium-40 ion held at 200 micrometers from either electrode plane. We characterize traps, achieving measurement agreement with simulations to within +/-5% for mode frequencies spanning 0.6--3.8 MHz, and evaluate stray electric field across multiple trapping sites. We measure motional heating rates over an extensive range of trap frequencies, and temperatures, observing 40 phonons/s at 1 MHz and 185 K. This fabrication method provides a highly scalable approach for producing a new generation of 3D ion traps.

quant-ph↗

arXiv2021

Motion analysis of a trapped ion chain by single photon self-interference

We present an optical scheme to detect the oscillations of a two-ion string confined in a linear Paul trap. The motion is detected by analyzing the intensity correlations in the fluorescence light emitted by one or two ions in the string. We present measurements performed under continuous Doppler cooling and under pulsed illumination. We foresee several direct applications of this detection method, including motional analysis of multi-ion species or coupled mechanical oscillators, and sensing of mechanical correlations.

quant-ph↗

arXiv2020

Measuring ion oscillations at the quantum level with fluorescence light

We demonstrate an optical method for detecting the mechanical oscillations of an atom with single-phonon sensitivity. The measurement signal results from the interference between the light scattered by a single trapped atomic ion and that of its mirror image. The motion of the atom modulates the interference path length and hence the photon detection rate. We detect the oscillations of the atom in the Doppler cooling limit and reconstruct average trajectories in phase space. We demonstrate single-phonon sensitivity near the ground state of motion after EIT cooling. These results could be applied for motion detection of other light scatterers of fundamental interest, such as trapped nanoparticles.

physics.atom-ph↗

arXiv2018

Observation of superconductivity and surface noise using a single trapped ion as a field probe

Measuring and understanding electric field noise from bulk material and surfaces is important for many areas of physics. In this work, we introduce a method to detect in situ different sources of electric field noise using a single trapped ion as a sensor. We demonstrate the probing of electric field noise as small as $S_E = 5.2(11)\times 10^{-16}\,\text{V}^2\text{m}^{-2}\text{Hz}^{-1}$, the lowest noise level observed with a trapped ion to our knowledge. Our setup incorporates a controllable noise source utilizing a high-temperature superconductor. This element allows us, first, to benchmark and validate the sensitivity of our probe. Second, to probe non-invasively bulk properties of the superconductor, observing for the first time a superconducting transition with an ion. For temperatures below the transition, we use our setup to assess different surface noise processes. The measured noise shows a crossover regime in the frequency domain, which cannot be explained by existing surface noise models. Our results open perspectives for new models in surface science and pave the way to test them experimentally.

physics.atom-ph↗

arXiv2014

Ion-trap electrode preparation with Ne$^+$ bombardment

We describe an ex-situ surface-cleaning procedure that is shown to reduce motional heating from ion-trap electrodes. This precleaning treatment, to be implemented immediately before the final assembly and vacuum processing of ion traps, removes surface contaminants remaining after the electrode-fabrication process. We incorporate a multi-angle ion-bombardment treatment intended to clean the electrode surfaces and interelectrode gaps of microfabricated traps. This procedure helps to minimize redeposition in the gaps between electrodes that can cause electrical shorts. We report heating rates in a stylus-type ion trap prepared in this way that are lower by one order of magnitude compared to a similar untreated stylus-type trap using the same experimental setup.

physics.atom-ph↗

arXiv2012

Microwave Near-Field Quantum Control of Trapped Ions

Microwave near-field quantum control of spin and motional degrees of freedom of 25Mg+ ions can be used to generate two-ion entanglement, as recently demonstrated in Ospelkaus et al. [Nature 476, 181 (2011)]. Here, we describe additional details of the setup and calibration procedures for these experiments. We discuss the design and characteristics of the surface-electrode trap and the microwave system, and compare experimental measurements of the microwave near-fields with numerical simulations. Additionally, we present a method that utilizes oscillating magnetic-field gradients to detect micromotion induced by the ponderomotive radio-frequency potential in linear traps. Finally, we discuss the present limitations of microwave-driven two-ion entangling gates in our system.

quant-ph↗

arXiv2012

Individual-Ion Addressing with Microwave Field Gradients

Individual-qubit addressing is a prerequisite for many instances of quantum information processing. We demonstrate this capability on trapped-ion qubits with microwave near-fields delivered by electrode structures integrated into a microfabricated surface-electrode trap. We describe four approaches that may be used in quantum information experiments with hyperfine levels as qubits. We implement individual control on two 25Mg+ ions separated by 4.3 micrometer and find spin-flip crosstalk errors on the order of 10^(-3).

quant-ph↗

arXiv2011

Reduction of anomalous heating in an in-situ-cleaned ion trap

Anomalous heating of trapped atomic ions is a major obstacle to their use as quantum bits in a scalable quantum computer. The physical origin of this heating is not fully understood, but experimental evidence suggests that it is caused by electric-field noise emanating from the surface of the trap electrodes. In this study, we have investigated the role that adsorbates on the electrodes play by identifying contaminant overlayers, developing an in situ argon-ion beam cleaning procedure, and measuring ion heating rates before and after cleaning the trap electrodes' surfaces. We find a reduction of two orders of magnitude in heating rate after cleaning.

quant-ph↗

arXiv2011

Microwave quantum logic gates for trapped ions

Control over physical systems at the quantum level is a goal shared by scientists in fields as diverse as metrology, information processing, simulation and chemistry. For trapped atomic ions, the quantized motional and internal degrees of freedom can be coherently manipulated with laser light. Similar control is difficult to achieve with radio frequency or microwave radiation because the essential coupling between internal degrees of freedom and motion requires significant field changes over the extent of the atoms' motion. The field gradients are negligible at these frequencies for freely propagating fields; however, stronger gradients can be generated in the near-field of microwave currents in structures smaller than the free-space wavelength. In the experiments reported here, we coherently manipulate the internal quantum states of the ions on time scales of 20 ns. We also generate entanglement between the internal degrees of freedom of two atoms with a gate operation suitable for general quantum computation. We implement both operations through the magnetic fields from microwave currents in electrodes that are integrated into the micro-fabricated trap structure and create an entangled state with fidelity 76(3) %. This approach, where the quantum control mechanism is integrated into the trapping device in a scalable manner, can potentially benefit quantum information processing, simulation and spectroscopy.

quant-ph↗

arXiv2011

Single-qubit-gate error below 10^-4 in a trapped ion

With a 9Be+ trapped-ion hyperfine-states qubit, we demonstrate an error probability per randomized single-qubit gate of 2.0(2) x 10^-5, below the threshold estimate of 10^-4 commonly considered sufficient for fault-tolerant quantum computing. The 9Be+ ion is trapped above a microfabricated surface-electrode ion trap and is manipulated with microwaves applied to a trap electrode. The achievement of low single-qubit-gate errors is an essential step toward the construction of a scalable quantum computer.

quant-ph↗

arXiv2010

Coupled quantized mechanical oscillators

The harmonic oscillator is one of the simplest physical systems but also one of the most fundamental. It is ubiquitous in nature, often serving as an approximation for a more complicated system or as a building block in larger models. Realizations of harmonic oscillators in the quantum regime include electromagnetic fields in a cavity [1-3] and the mechanical modes of a trapped atom [4] or macroscopic solid [5]. Quantized interaction between two motional modes of an individual trapped ion has been achieved by coupling through optical fields [6], and entangled motion of two ions in separate locations has been accomplished indirectly through their internal states [7]. However, direct controllable coupling between quantized mechanical oscillators held in separate locations has not been realized previously. Here we implement such coupling through the mutual Coulomb interaction of two ions held in trapping potentials separated by 40 um (similar work is reported in a related paper [8]). By tuning the confining wells into resonance, energy is exchanged between the ions at the quantum level, establishing that direct coherent motional coupling is possible for separately trapped ions. The system demonstrates a building block for quantum information processing and quantum simulation. More broadly, this work is a natural precursor to experiments in hybrid quantum systems, such as coupling a trapped ion to a quantized macroscopic mechanical or electrical oscillator [9-13].

quant-ph↗

arXiv2010

Efficient Fiber Optic Detection of Trapped Ion Fluorescence

Integration of fiber optics may play a critical role in the development of quantum information processors based on trapped ions and atoms by enabling scalable collection and delivery of light and coupling trapped ions to optical microcavities. We trap 24Mg+ ions in a surface-electrode Paul trap that includes an integrated optical fiber for detecting 280-nm fluorescence photons. The collection numerical aperture is 0.37 and total collection efficiency is 2.1 %. The ion can be positioned between 80 \mum and 100 \mum from the tip of the fiber by use of an adjustable rf-pseudopotential.

quant-ph↗

arXiv2006

A stable fiber-based Fabry-Perot cavity

We report the development of a fiber-based, tunable optical cavity with open access. The cavity is of the Fabry-Perot type and is formed with miniature spherical mirrors positioned on the end of single- or multi-mode optical fibers by a transfer technique which involves lifting a high-quality mirror from a smooth convex substrate, either a ball lens or micro-lens. The cavities typically have a finesse of $\sim 1,000$ and a mode volume of 600 $μ$m$^3$. We demonstrate the detection of small ensembles of cold Rb atoms guided through such a cavity on an atom chip.

physics.atom-ph↗