arXiv subjects

Xuming Chen

Publications and source records attributed to Xuming Chen.

10 recordsLinked to original sources

arXiv2026

Hardware-Aware Learned Representation Compression for Distributed In-Sensor Vision

In-sensor computing reduces the cost of transmitting high-resolution image data by performing early-stage processing near the sensor. However, the logic chip integrated with a CMOS image sensor (CIS) is tightly constrained in compute and memory, limiting conventional deep neural network partitioning. We present OASIS, a distributed in-sensor vision framework that uses a lightweight encoder to generate compact, task-relevant representations before off-chip transmission. The encoder is trained end-to-end using task, entropy, and reconstruction objectives, while the decoder is used only during training. OASIS supports two complementary deployment paths. The first applies 4-bit quantization and Huffman coding while preserving the spatial structure required by classification and dense-prediction tasks. The second uses Sobol-based hyperdimensional computing (HDC) to transform the encoder latent into a fixed-dimensional binary hypervector for associative-memory classification. For the SwinViT-based VWW model, mapping a $3\times3\times8$ latent to a 64-dimensional hypervector provides an additional $1.77\times$ communication reduction with less than one percentage point of accuracy loss relative to the 128-dimensional configuration, yielding an overall $18{,}816\times$ reduction compared with raw 8-bit image transmission. We implement the digital near-sensor pipeline on an AMD Xilinx Zynq UltraScale+ FPGA and characterize it using direct board-level power measurements and Vivado post-implementation analysis, together with circuit-simulated CIS models and a 7-nm ASIC projection. Across visual wake-word classification, hand tracking, and eye tracking, OASIS reduces total system energy by approximately $2\times$-$4.5\times$ while maintaining competitive accuracy, demonstrating a practical hardware-algorithm co-design path for communication-efficient in-sensor vision.

cs.LG↗

arXiv2026

A Time-Encoded Analog Photonic Interposer for Energy-EfficientIntegration of Analog Vision Sensors and Analog Accelerators

This work introduces a time-encoded analog photonic interposer that enables long-distance, high-fidelity transport of analog signals between spatially separated chiplets. Unlike prior silicon-photonic links limited to digital data, the interposer preserves analog information by converting amplitudes into timing intervals using an analog-to-time converter (ATC), transmitting them over a wavelength-division-multiplexed photonic link, and reconstructing values at the receiver without an explicit high-precision ADC/DAC data-converter pipeline. The link instead embeds an implicit 6-bit time-domain quantization and uses a single wavelength per processing element independent of bit precision. Evaluated in a fully analog vision pipeline with an in-pixel computing (IPC) sensor, it achieves a 2.04x energy--delay product (EDP) improvement over an 8-bit digital electrical baseline on the 560x560 Visual Wake Words dataset, with the advantage widening with link length even against a precision-matched 6-bit baseline. The pipeline holds 89.87% and 86.15% accuracy on ResNet18 and MobileNetV2 for VWW and generalizes across CIFAR-10 and ModelNet40 within 2% of the digital baseline.

cs.AR↗

arXiv2026

Opto-ViT-v2: Noise-Resilient On-Chip Fine-Tuning for Photonic Near-Sensor Vision Transformer Accelerators

Silicon-photonic (SiPh) accelerators have emerged as a promising platform for Vision Transformer (ViT) inference by performing matrix multiplications on microring-resonator (MRR) banks with high throughput and energy efficiency. Extending these platforms to support on-chip fine-tuning remains challenging because backpropagation requires large activation storage, frequent weight write-back to MRRs, and tolerance to device-level noise. We present Opto-ViT-v2, the first framework for parameter-efficient fine-tuning (PEFT) on a near-sensor SiPh ViT accelerator. Our tensorized low-rank decomposition separates pretrained optical weights from a small set of trainable electronic factors (as few as 8K parameters for ViT-Base), greatly reducing activation storage and weight updates while enabling practical on-chip training. We further introduce a gradient-accumulated sparse classifier that freezes low-importance weights through one-shot top-k gradient masking, reducing classifier training cost by about 40 percent. We also develop the first system-level noise model for photonic on-chip training, capturing the effects of MRR crosstalk, thermal drift, and laser amplitude noise during both forward and backward propagation. Calibrated using measurements from more than 200 fabricated MRR devices, the model shows that low-rank factor updates are more robust than full fine-tuning and conventional layer-wise low-rank adaptation under identical noise conditions. Experiments on VTAB-1K (19 tasks) and FGVC few-shot benchmarks demonstrate that Opto-ViT-v2 recovers within 0.3 to 0.8 percent of clean software accuracy under measured photonic noise while achieving more than 100 KFPS/W, enabling practical on-chip domain adaptation for photonic edge vision systems.

cs.AR↗

arXiv2026

FrequencyFormer: A Co-Designed Sensor-to-Processor Pipeline for Frequency-Domain Vision Transformer Inference

Deploying vision transformers (ViTs) on sensor-edge systems is limited not only by on-device compute, but also by the energy and bandwidth required to transmit high-dimensional image data from the sensor to the processor. While in-sensor and near-sensor computing reduce this cost through early feature extraction, existing methods often provide only modest compression. We observe that the frequency domain provides a naturally compact representation of visual information and can be exploited at the sensor level to reduce sensor-to-processor data movement. Building on this insight, we present FrequencyFormer, a co-designed sensor-to-processor pipeline for efficient ViT inference. FrequencyFormer includes: (1) a multi-scale DCT tokenizer that compresses a 224x224 image into compact frequency-domain tokens, achieving up to 128x reduction in off-chip data volume with modest accuracy loss; (2) a LUT-based near-sensor hardware implementation that leverages fixed DCT coefficients for multiplier-free, energy- and area-efficient tokenization; and (3) a modified MIPI-based low-power communication architecture that further reduces transfer energy. FrequencyFormer serves as a drop-in replacement for standard ViT patch embedding and remains compatible with pretrained backbones across classification, detection, and segmentation tasks. The pipeline achieves 28.8 TOPS/W, reduces communication energy by 230x, and lowers total sensor-side energy by 2.22x, demonstrating frequency-domain tokenization as a scalable foundation for in-sensor ViT deployment.

eess.IV↗

arXiv2026

Sense Less, Infer More: Agentic Multimodal Transformers for Edge Medical Intelligence

Edge-based multimodal medical monitoring requires models that balance diagnostic accuracy with severe energy constraints. Continuous acquisition of ECG, PPG, EMG, and IMU streams rapidly drains wearable batteries, often limiting operation to under 10 hours, while existing systems overlook the high temporal redundancy present in physiological signals. We introduce Adaptive Multimodal Intelligence (AMI), an end-to-end framework that jointly learns when to sense and how to infer. AMI integrates three components: (1) a lightweight Agentic Modality Controller that uses differentiable Gumbel-Sigmoid gating to dynamically select active sensors based on model confidence and task relevance; (2) a Learned Sigma-Delta Sensing module that applies patch-wise Delta-Sigma operations with learnable thresholds to skip temporally redundant samples; and (3) a Foundation-backed Multimodal Prediction Model built on unimodal foundation encoders and a cross-modal transformer with temporal context, enabling robust fusion even under gated or missing inputs. These components are trained jointly via a multi-objective loss combining classification accuracy, sparsity regularization, cross-modal alignment, and predictive coding. AMI is hardware-aware, supporting dynamic computation graphs and masked operations, leading to real energy and latency savings. Across MHEALTH, HMC Sleep, and WESAD datasets, it reduces sensor usage by 48.8% while improving state-of-the-art accuracy by 1.9% on average.

cs.ET↗

arXiv2026

Light-Bound Transformers: Hardware-Anchored Robustness for Silicon-Photonic Computer Vision Systems

Deploying Vision Transformers (ViTs) on near-sensor analog accelerators demands training pipelines that are explicitly aligned with device-level noise and energy constraints. We introduce a compact framework for silicon-photonic execution of ViTs that integrates measured hardware noise, robust attention training, and an energy-aware processing flow. We first characterize bank-level noise in microring-resonator (MR) arrays, including fabrication variation, thermal drift, and amplitude noise, and convert these measurements into closed-form, activation-dependent variance proxies for attention logits and feed-forward activations. Using these proxies, we develop Chance-Constrained Training (CCT), which enforces variance-normalized logit margins to bound attention rank flips, and a noise-aware LayerNorm that stabilizes feature statistics without changing the optical schedule. These components yield a practical ``measure $\rightarrow$ model $\rightarrow$ train $\rightarrow$ run'' pipeline that optimizes accuracy under noise while respecting system energy limits. Hardware-in-the-loop experiments with MR photonic banks show that our approach restores near-clean accuracy under realistic noise budgets, with no in-situ learning or additional optical MACs.

cs.ET↗

arXiv2025

NVM-in-Cache: Repurposing Commodity 6T SRAM Cache into NVM Analog Processing-in-Memory Engine using a Novel Compute-on-Powerline Scheme

The rapid growth of deep neural network (DNN) workloads has significantly increased the demand for large-capacity on-chip SRAM in machine learning (ML) applications, with SRAM arrays now occupying a substantial fraction of the total die area. To address the dual challenges of storage density and computation efficiency, this paper proposes an NVM-in-Cache architecture that integrates resistive RAM (RRAM) devices into a conventional 6T-SRAM cell, forming a compact 6T-2R bit-cell. This hybrid cell enables Processing-in-Memory (PIM) mode, which performs massively parallel multiply-and-accumulate (MAC) operations directly on cache power lines while preserving stored cache data. By exploiting the intrinsic properties of the 6T-2R structure, the architecture achieves additional storage capability, high computational throughput without any bit-cell area overhead. Circuit- and array-level simulations in GlobalFoundries 22nm FDSOI technology demonstrate that the proposed design achieves a throughput of 0.4 TOPS and 452.34 TOPS/W. For 128 row-parallel operations, the CIFAR-10 classification is demonstrated by mapping a Resnet-18 neural network, achieving an accuracy of 91.76%. These results highlight the potential of the NVM-in-Cache approach to serve as a scalable, energy-efficient computing method by re-purposing existing 6T SRAM cache architecture for next-generation AI accelerators and general purpose processors.

cs.AR↗

arXiv2020

Spatial Context-Aware Self-Attention Model For Multi-Organ Segmentation

Multi-organ segmentation is one of most successful applications of deep learning in medical image analysis. Deep convolutional neural nets (CNNs) have shown great promise in achieving clinically applicable image segmentation performance on CT or MRI images. State-of-the-art CNN segmentation models apply either 2D or 3D convolutions on input images, with pros and cons associated with each method: 2D convolution is fast, less memory-intensive but inadequate for extracting 3D contextual information from volumetric images, while the opposite is true for 3D convolution. To fit a 3D CNN model on CT or MRI images on commodity GPUs, one usually has to either downsample input images or use cropped local regions as inputs, which limits the utility of 3D models for multi-organ segmentation. In this work, we propose a new framework for combining 3D and 2D models, in which the segmentation is realized through high-resolution 2D convolutions, but guided by spatial contextual information extracted from a low-resolution 3D model. We implement a self-attention mechanism to control which 3D features should be used to guide 2D segmentation. Our model is light on memory usage but fully equipped to take 3D contextual information into account. Experiments on multiple organ segmentation datasets demonstrate that by taking advantage of both 2D and 3D models, our method is consistently outperforms existing 2D and 3D models in organ segmentation accuracy, while being able to directly take raw whole-volume image data as inputs.

eess.IV↗

arXiv2020

AttentionAnatomy: A unified framework for whole-body organs at risk segmentation using multiple partially annotated datasets

Organs-at-risk (OAR) delineation in computed tomography (CT) is an important step in Radiation Therapy (RT) planning. Recently, deep learning based methods for OAR delineation have been proposed and applied in clinical practice for separate regions of the human body (head and neck, thorax, and abdomen). However, there are few researches regarding the end-to-end whole-body OARs delineation because the existing datasets are mostly partially or incompletely annotated for such task. In this paper, our proposed end-to-end convolutional neural network model, called \textbf{AttentionAnatomy}, can be jointly trained with three partially annotated datasets, segmenting OARs from whole body. Our main contributions are: 1) an attention module implicitly guided by body region label to modulate the segmentation branch output; 2) a prediction re-calibration operation, exploiting prior information of the input images, to handle partial-annotation(HPA) problem; 3) a new hybrid loss function combining batch Dice loss and spatially balanced focal loss to alleviate the organ size imbalance problem. Experimental results of our proposed framework presented significant improvements in both Sørensen-Dice coefficient (DSC) and 95\% Hausdorff distance compared to the baseline model.

eess.IV↗

arXiv2018

AnatomyNet: Deep Learning for Fast and Fully Automated Whole-volume Segmentation of Head and Neck Anatomy

Methods: Our deep learning model, called AnatomyNet, segments OARs from head and neck CT images in an end-to-end fashion, receiving whole-volume HaN CT images as input and generating masks of all OARs of interest in one shot. AnatomyNet is built upon the popular 3D U-net architecture, but extends it in three important ways: 1) a new encoding scheme to allow auto-segmentation on whole-volume CT images instead of local patches or subsets of slices, 2) incorporating 3D squeeze-and-excitation residual blocks in encoding layers for better feature representation, and 3) a new loss function combining Dice scores and focal loss to facilitate the training of the neural model. These features are designed to address two main challenges in deep-learning-based HaN segmentation: a) segmenting small anatomies (i.e., optic chiasm and optic nerves) occupying only a few slices, and b) training with inconsistent data annotations with missing ground truth for some anatomical structures. Results: We collected 261 HaN CT images to train AnatomyNet, and used MICCAI Head and Neck Auto Segmentation Challenge 2015 as a benchmark dataset to evaluate the performance of AnatomyNet. The objective is to segment nine anatomies: brain stem, chiasm, mandible, optic nerve left, optic nerve right, parotid gland left, parotid gland right, submandibular gland left, and submandibular gland right. Compared to previous state-of-the-art results from the MICCAI 2015 competition, AnatomyNet increases Dice similarity coefficient by 3.3% on average. AnatomyNet takes about 0.12 seconds to fully segment a head and neck CT image of dimension 178 x 302 x 225, significantly faster than previous methods. In addition, the model is able to process whole-volume CT images and delineate all OARs in one pass, requiring little pre- or post-processing. https://github.com/wentaozhu/AnatomyNet-for-anatomical-segmentation.git.

cs.CV↗