arXiv Science⌕ Search

arXiv subjects

Xufei Guo

Publications and source records attributed to Xufei Guo.

6 recordsLinked to original sources

Thermal and Acoustic Measurements of Hybrid Bonding Stacks

Thermal and structural characterizations of hybrid bonding structures are essential for understanding heat transport in three-dimensional integrated circuits (3D-ICs). In this work, we investigate the effective thermal conductivity of the Cu/dielectric HB layer using time-domain thermoreflectance (TDTR) combined with picosecond ultrasonic technique. Shallow-angle polishing enabled depth-resolved thermal measurements by exposing hybrid bonding layers with different remaining thicknesses, while acoustic echoes were used to identify buried interfaces and determine the thickness. The distinct waveform of the bonding interface echo compared with the Cu/dielectric interface echo suggests that its acoustic response may also reflect the interfacial bonding conditions. The extracted thermal conductivity ranges from 1.14 to 1.75 Wm-1K-1 for the bottom pad layer and from 1.76 to 4.34 Wm-1K-1 for the top pad layer. The difference in thermal conductivity is consistent with the different Cu area fractions of the two layers. Furthermore, the thermal conductivity of the top pad layer increases significantly with the remaining thickness, possibly due to the thermal boundary resistance at the bonding interface, low thermal conductivity of SiCN interlayer, and increased electron scattering in thin Cu structures. Our work demonstrates a practical approach to investigate the thermal properties of buried hybrid bonding layers, providing experimental data for thermal design and modeling of 3D-ICs.

physics.app-ph↗

Resolving the Thermal Labyrinth inside 3D-IC Stacks

The heat pathways in 3D-ICs have long been a labyrinth lacking experimental investigations into spatial distribution of thermal properties, severely limiting study of internal thermal management inside chips. For the first time, we established a methodology for 3D thermal characterizations of advanced 3D-ICs, implemented through a systematic workflow that enables layer-resolved thermal property extraction and the construction of a location-specific thermal database. We demonstrated its application to an advanced sample featuring 2.2-μm-diameter TSVs and ~2-μm-pitch face-to-face hybrid bonding (HB). Time-domain and steady-state thermoreflectance were used to extract the thermal conductivities (TCs) of Al traces, TSV, BEOL interconnects and HB pads, indicating HB structure enables efficient thermal transport with 9 W/m-K TC. Further, we mapped and visualized the TC distribution of TSV structures and RDL Cu wires with small step sizes down to 0.2 μm. Utilizing these results, we proposed an experiment-based thermal model to reveal that co-evolution of interconnect and substrate TCs is essential for thermal design and fabrication towards effective cooling optimization.

physics.app-ph↗

CoDy: Codec Dynamics as Complementary Priors for Unsupervised Temporal Action Localization

Unsupervised temporal action localization (UTAL) aims to identify action categories and localize their temporal boundaries without annotation supervision. Existing methods typically derive supervision for both tasks solely from RGB and optical-flow representations, often resulting in noisy category assignments and inaccurate temporal boundaries. In this work, we reveal an overlooked property of video codecs: group-of-pictures quantization patterns preserve category-discriminative dynamics, while motion-vector and residual variations exhibit pronounced responses around action transitions. Based on this insight, we propose CoDy, a codec dynamics-guided framework that exploits the codec as complementary information to the visual view for UTAL. CoDy integrates a codec-enhanced view with RGB and flow through confidence-aware consensus clustering, producing reliable soft pseudo-labels. It further converts codec dynamics into a class-agnostic boundary prior, which supervises visual boundary learning and guides proposal initialization and iterative refinement. The codec branches are only used during the training stage and introduce no extra codec-side computation at inference. Extensive experiments on THUMOS14 and ActivityNet v1.3 demonstrate that CoDy consistently outperforms existing UTAL methods and achieves state-of-the-art localization performance. These results establish codec signals as effective annotation-free priors for jointly inferring which actions occur and when they occur.

cs.CV↗

Value-Guided Repulsion for Offline Reinforcement Learning

Drifting models have emerged as a highly efficient and stable paradigm for policy design in offline reinforcement learning (RL). However, standard drift policies determine repulsion solely from geometric relationships among generated actions and therefore cannot distinguish them by expected value. To address this limitation, we introduce Value-Guided Repulsion Q-Learning (VRQL) to integrate action value estimates into the particle interaction field. For each state, VRQL combines geometric kernel distance with a normalized Q value scaling. This mechanism assigns greater repulsive influence to particles with lower values while strictly retaining attraction toward behavior action. Consequently, this value-guided interaction field aligns behavior regularization with policy improvement without adding an auxiliary behavior model stage. On 50 OGBench task configurations and 6 D4RL AntMaze configurations, VRQL demonstrates highly competitive performance against established baselines, suggesting that value-guided particle interaction is an effective method for offline RL.

cs.AI↗

High Thermal Conductivity in Back-End-of-Line Compatible AlN Thin Films

With thermal issues becoming a major challenge to the development of integrated circuits (ICs), high-thermal-conductivity (high-TC) materials are gaining interest from both the industry and academia, especially for high-density back-end-of-line (BEOL) structures. Aluminum nitride (AlN) is an insulating material with high TC, suitable for thermal management in electronic devices. Furthermore, polycrystalline AlN thin films can be deposited at BEOL-compatible low temperatures (lower than 400 C) while retaining relatively high TC, rendering AlN a promising candidate for BEOL heat dissipation. Still, AlN deposition should aim at achieving high TC on a variety of substrates used in IC processes. In this work, we obtained 600- and 1200-nm BEOL-compatible AlN thin film samples on Si, SiO, SiN, and Al2O3 substrates for structural and thermal characterizations. Specifically, time-domain thermoreflectance (TDTR) measurements revealed consistently high TC (higher than 45 W m-1 K-1) on different substrates. Moreover, finite element analysis (FEA) simulations of AlN capped on top of an indium-tin-oxide (ITO) transistor showed a reduction of up to 44% in peak device temperature. Our work provided experimental and calculational evidence for the practicality of leveraging AlN as a high-TC, BEOL-compatible heat spreader material.

cond-mat.mtrl-sci↗

Ion Implantation Enhanced Nucleation Facilitates Heat Transport across Atomically-Sharp Semiconductor Interfaces

Overheating is a critical bottleneck limiting the performance and reliability of next-generation high-power and high-frequency electronics. Interfacial thermal resistance constitutes a significant portion of the total thermal resistance. In this study, we report an ultrahigh thermal boundary conductance (TBC) of approximately 800 MW/m2-K at the atomically-sharp AlN-SiC interface, achieved through an ion implantation-enhanced nucleation epitaxy technique. This value is among the highest TBC values reported for semiconductor interfaces, confirmed by structural characterizations which show an ultrahigh-quality interface. Atomistic Green Function calculations reveal that elastic phonon transmission dominates the interface, with nearly half of the acoustic modes (0-15 THz) exhibiting near-unity transmission due to the atomically sharp structure. Furthermore, using high-energy-resolution electron energy loss spectroscopy, we probe vibrational properties with nanometer spatial resolution and identify unique interfacial phonon modes connecting the mismatched phonon spectra, confirmed by molecular dynamics simulations. The ultrahigh TBC is attributed to both the high elastic phonon transmission due to the high quality interfaces and the inelastic phonon scattering channel due to interfacial phonon modes. These findings not only advance the fundamental understanding of interfacial thermal transport but also provide a pathway for effective thermal management in emerging electronic devices.

cond-mat.mes-hall↗