arXiv subjects

Xu Wu

Publications and source records attributed to Xu Wu.

At least 55 records · Page 3Linked to original sources

arXiv2023

Strain effects in twisted spiral antimonene

van der Waals (vdW) layered materials exhibit fruitful novel physical properties. The energy band of such materials depends strongly on their structures and a tremendous variation in their physical properties can be deduced from a tiny change in inter-layer spacing, twist angle, or in-plane strain. In this work, a kind of vdW layered material of spiral antimonene is constructed, and the strain effects in the material are studied. The spiral antimonene is grown on a germanium (Ge) substrate and is induced by a helical dislocation penetrating through few-atomic-layers of antimonene (\b{eta}-phase). The as-grown spiral is intrinsically strained and the lattice distortion is found to be pinned around the dislocation. Both spontaneous inter-layer twist and in-plane anisotropic strain are observed in scanning tunneling microscope (STM) measurements. The strain in the spiral antimonene can be significantly modified by STM tip interaction, leading to a variation in the surface electronic density of states (DOS) and a large modification in the work function of up to a few hundreds of milli-electron-volts (meV). Those strain effects are expected to have potential applications in building up novel piezoelectric devices.

cond-mat.mtrl-sci↗

arXiv2023

Intralayer Negative Poisson's Ratio in Two-Dimensional Black Arsenic by Strain Engineering

Negative Poisson's ratio as the anomalous characteristic generally exists in artificial architectures, such as re-entrant and honeycomb structures. The structures with negative Poisson's ratio have attracted intensive attention due to their unique auxetic effect and many promising applications in shear resistant and energy absorption fields. However, experimental observation of negative Poisson's ratio in natural materials barely happened, although various two-dimensional layered materials are predicted in theory. Herein, we report the anisotropic Raman response and the intrinsic intralayer negative Poisson's ratio of two-dimensional natural black arsenic (b-As) via strain engineering strategy. The results were evident by the detailed Raman spectrum of b-As under uniaxial strain together with density functional theory calculations. It is found that b-As was softer along the armchair than zigzag direction. The anisotropic mechanical features and van der Waals interactions play essential roles in strain-dependent Raman shifts and negative Poisson's ratio in the natural b-As along zigzag direction. This work may shed a light on the mechanical properties and potential applications of two-dimensional puckered materials.

cond-mat.mtrl-sci↗

arXiv2023

Deep Generative Modeling-based Data Augmentation with Demonstration using the BFBT Benchmark Void Fraction Datasets

Deep learning (DL) has achieved remarkable successes in many disciplines such as computer vision and natural language processing due to the availability of ``big data''. However, such success cannot be easily replicated in many nuclear engineering problems because of the limited amount of training data, especially when the data comes from high-cost experiments. To overcome such a data scarcity issue, this paper explores the applications of deep generative models (DGMs) that have been widely used for image data generation to scientific data augmentation. DGMs, such as generative adversarial networks (GANs), normalizing flows (NFs), variational autoencoders (VAEs), and conditional VAEs (CVAEs), can be trained to learn the underlying probabilistic distribution of the training dataset. Once trained, they can be used to generate synthetic data that are similar to the training data and significantly expand the dataset size. By employing DGMs to augment TRACE simulated data of the steady-state void fractions based on the NUPEC Boiling Water Reactor Full-size Fine-mesh Bundle Test (BFBT) benchmark, this study demonstrates that VAEs, CVAEs, and GANs have comparable generative performance with similar errors in the synthetic data, with CVAEs achieving the smallest errors. The findings shows that DGMs have a great potential to augment scientific data in nuclear engineering, which proves effective for expanding the training dataset and enabling other DL models to be trained more accurately.

cs.LG↗

arXiv2023

Reduced Order Modeling of a MOOSE-based Advanced Manufacturing Model with Operator Learning

Advanced Manufacturing (AM) has gained significant interest in the nuclear community for its potential application on nuclear materials. One challenge is to obtain desired material properties via controlling the manufacturing process during runtime. Intelligent AM based on deep reinforcement learning (DRL) relies on an automated process-level control mechanism to generate optimal design variables and adaptive system settings for improved end-product properties. A high-fidelity thermo-mechanical model for direct energy deposition has recently been developed within the MOOSE framework at the Idaho National Laboratory (INL). The goal of this work is to develop an accurate and fast-running reduced order model (ROM) for this MOOSE-based AM model that can be used in a DRL-based process control and optimization method. Operator learning (OL)-based methods will be employed due to their capability to learn a family of differential equations, in this work, produced by changing process variables in the Gaussian point heat source for the laser. We will develop OL-based ROM using Fourier neural operator, and perform a benchmark comparison of its performance with a conventional deep neural network-based ROM.

stat.ML↗

arXiv2023

Fast and Accurate Reduced-Order Modeling of a MOOSE-based Additive Manufacturing Model with Operator Learning

One predominant challenge in additive manufacturing (AM) is to achieve specific material properties by manipulating manufacturing process parameters during the runtime. Such manipulation tends to increase the computational load imposed on existing simulation tools employed in AM. The goal of the present work is to construct a fast and accurate reduced-order model (ROM) for an AM model developed within the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework, ultimately reducing the time/cost of AM control and optimization processes. Our adoption of the operator learning (OL) approach enabled us to learn a family of differential equations produced by altering process variables in the laser's Gaussian point heat source. More specifically, we used the Fourier neural operator (FNO) and deep operator network (DeepONet) to develop ROMs for time-dependent responses. Furthermore, we benchmarked the performance of these OL methods against a conventional deep neural network (DNN)-based ROM. Ultimately, we found that OL methods offer comparable performance and, in terms of accuracy and generalizability, even outperform DNN at predicting scalar model responses. The DNN-based ROM afforded the fastest training time. Furthermore, all the ROMs were faster than the original MOOSE model yet still provided accurate predictions. FNO had a smaller mean prediction error than DeepONet, with a larger variance for time-dependent responses. Unlike DNN, both FNO and DeepONet were able to simulate time series data without the need for dimensionality reduction techniques. The present work can help facilitate the AM optimization process by enabling faster execution of simulation tools while still preserving evaluation accuracy.

cs.LG↗

arXiv2023

Functional PCA and Deep Neural Networks-based Bayesian Inverse Uncertainty Quantification with Transient Experimental Data

Inverse UQ is the process to inversely quantify the model input uncertainties based on experimental data. This work focuses on developing an inverse UQ process for time-dependent responses, using dimensionality reduction by functional principal component analysis (PCA) and deep neural network (DNN)-based surrogate models. The demonstration is based on the inverse UQ of TRACE physical model parameters using the FEBA transient experimental data. The measurement data is time-dependent peak cladding temperature (PCT). Since the quantity-of-interest (QoI) is time-dependent that corresponds to infinite-dimensional responses, PCA is used to reduce the QoI dimension while preserving the transient profile of the PCT, in order to make the inverse UQ process more efficient. However, conventional PCA applied directly to the PCT time series profiles can hardly represent the data precisely due to the sudden temperature drop at the time of quenching. As a result, a functional alignment method is used to separate the phase and amplitude information of the transient PCT profiles before dimensionality reduction. DNNs are then trained using PC scores from functional PCA to build surrogate models of TRACE in order to reduce the computational cost in Markov Chain Monte Carlo sampling. Bayesian neural networks are used to estimate the uncertainties of DNN surrogate model predictions. In this study, we compared four different inverse UQ processes with different dimensionality reduction methods and surrogate models. The proposed approach shows an improvement in reducing the dimension of the TRACE transient simulations, and the forward propagation of inverse UQ results has a better agreement with the experimental data.

stat.ML↗

arXiv2023

Spatio-Temporal Classification of Lung Ventilation Patterns using 3D EIT Images: A General Approach for Individualized Lung Function Evaluation

The Pulmonary Function Test (PFT) is an widely utilized and rigorous classification test for lung function evaluation, serving as a comprehensive tool for lung diagnosis. Meanwhile, Electrical Impedance Tomography (EIT) is a rapidly advancing clinical technique that visualizes conductivity distribution induced by ventilation. EIT provides additional spatial and temporal information on lung ventilation beyond traditional PFT. However, relying solely on conventional isolated interpretations of PFT results and EIT images overlooks the continuous dynamic aspects of lung ventilation. This study aims to classify lung ventilation patterns by extracting spatial and temporal features from the 3D EIT image series. The study uses a Variational Autoencoder network with a MultiRes block to compress the spatial distribution in a 3D image into a one-dimensional vector. These vectors are then concatenated to create a feature map for the exhibition of temporal features. A simple convolutional neural network is used for classification. Data collected from 137 subjects were finally used for training. The model is validated by ten-fold and leave-one-out cross-validation first. The accuracy and sensitivity of normal ventilation mode are 0.95 and 1.00, and the f1-score is 0.94. Furthermore, we check the reliability and feasibility of the proposed pipeline by testing it on newly recruited nine subjects. Our results show that the pipeline correctly predicts the ventilation mode of 8 out of 9 subjects. The study demonstrates the potential of using image series for lung ventilation mode classification, providing a feasible method for patient prescreening and presenting an alternative form of PFT.

eess.IV↗

arXiv2023

$H^1$-norm stability and convergence of an L2-type method on nonuniform meshes for subdiffusion equation

This work establishes $H^1$-norm stability and convergence for an L2 method on general nonuniform meshes when applied to the subdiffusion equation. Under mild constraints on the time step ratio $ρ_k$, such as $0.4573328\leq ρ_k\leq 3.5615528$ for $k\geq 2$, the positive semidefiniteness of a crucial bilinear form associated with the L2 fractional-derivative operator is proved. This result enables us to derive long time $H^1$-stability of L2 schemes. These positive semidefiniteness and $H^1$-stability properties hold for standard graded meshes with grading parameter $1 5/α-1$. To the best of our knowledge, this study is the first work on $H^1$-norm stability and convergence of L2 methods on general nonuniform meshes for the subdiffusion equation.

math.NA↗

arXiv2023

Layer sliding and twisting induced electronic transitions in correlated magnetic 1T-NbSe2 bilayers

Correlated two-dimensional (2D) layers, like 1T-phases of TaS2, TaSe2 and NbSe2, exhibit rich tunability through varying interlayer couplings, which promotes the understanding of electron-correlation in the 2D limit. However, the coupling mechanism is, so far, poorly understood and was tentatively ascribed to interactions among the d_(z^2 ) orbitals of Ta or Nb atoms. Here, we theoretically show that the interlayer hybridization and localization strength of interfacial Se pz orbitals, rather than Nb d_(z^2 ) orbitals, govern the variation of electron-correlated properties upon interlayer sliding or twisting in correlated magnetic 1T-NbSe2 bilayers. Each of the both layers is in a star-of-David (SOD) charge-density-wave phase. Geometric and electronic structures, and magnetic properties of 28 different stacking configurations were examined and analyzed using density-functional-theory calculations. We found that the SOD contains a localized region (Reg-L), in which interlayer Se pz hybridization plays a paramount role in varying the energy levels of the two Hubbard bands. These variations lead to three electronic transitions among four insulating states, which demonstrated the effectiveness of interlayer interactions to modulate correlated magnetic properties in a prototypical correlated magnetic insulator.

cond-mat.mtrl-sci↗

arXiv2022

Roundoff error problem in L2-type methods for time-fractional problems

Roundoff error problems have occurred frequently in interpolation methods of time-fractional equations, which can lead to undesirable results such as the failure of optimal convergence. These problems are essentially caused by catastrophic cancellations. Currently, a feasible way to avoid these cancellations is using the Gauss--Kronrod quadrature to approximate the integral formulas of coefficients rather than computing the explicit formulas directly for example in the L2-type methods. This nevertheless increases computational cost and arises additional integration errors. In this work, a new framework to handle catastrophic cancellations is proposed, in particular, in the computation of the coefficients for standard and fast L2-type methods on general nonuniform meshes. We propose a concept of $δ$-cancellation and then some threshold conditions ensuring that $δ$-cancellations will not happen. If the threshold conditions are not satisfied, a Taylor-expansion technique is proposed to avoid $δ$-cancellation. Numerical experiments show that our proposed method performs as accurate as the Gauss--Kronrod quadrature method and meanwhile much more efficient. This enables us to complete long time simulations with hundreds of thousands of time steps in short time.

math.NA↗

arXiv2022

Long time $H^1$-stability of fast L2-1$_σ$ method on general nonuniform meshes for subdiffusion equations

In this work, the global-in-time $H^1$-stability of a fast L2-1$_σ$ method on general nonuniform meshes is studied for subdiffusion equations, where the convolution kernel in the Caputo fractional derivative is approximated by sum of exponentials. Under some mild restrictions on time stepsize, a bilinear form associated with the fast L2-1$_σ$ formula is proved to be positive semidefinite for all time. As a consequence, the uniform global-in-time $H^1$-stability of the fast L2-1$_σ$ schemes can be derived for both linear and semilinear subdiffusion equations, in the sense that the $H^1$-norm is uniformly bounded as the time tends to infinity. To the best of our knowledge, this appears to be the first work for the global-in-time $H^1$-stability of fast L2-1$_σ$ scheme on general nonuniform meshes for subdiffusion equations. Moreover, the sharp finite time $H^1$-error estimate for the fast L2-1$_σ$ schemes is reproved based on more delicate analysis of coefficients where the restriction on time step ratios is relaxed comparing to existing works.

math.NA↗

arXiv2022

Prediction and Uncertainty Quantification of SAFARI-1 Axial Neutron Flux Profiles with Neural Networks

Artificial Neural Networks (ANNs) have been successfully used in various nuclear engineering applications, such as predicting reactor physics parameters within reasonable time and with a high level of accuracy. Despite this success, they cannot provide information about the model prediction uncertainties, making it difficult to assess ANN prediction credibility, especially in extrapolated domains. In this study, Deep Neural Networks (DNNs) are used to predict the assembly axial neutron flux profiles in the SAFARI-1 research reactor, with quantified uncertainties in the ANN predictions and extrapolation to cycles not used in the training process. The training dataset consists of copper-wire activation measurements, the axial measurement locations and the measured control bank positions obtained from the reactor's historical cycles. Uncertainty Quantification of the regular DNN models' predictions is performed using Monte Carlo Dropout (MCD) and Bayesian Neural Networks solved by Variational Inference (BNN VI). The regular DNNs, DNNs solved with MCD and BNN VI results agree very well among each other as well as with the new measured dataset not used in the training process, thus indicating good prediction and generalization capability. The uncertainty bands produced by MCD and BNN VI agree very well, and in general, they can fully envelop the noisy measurement data points. The developed ANNs are useful in supporting the experimental measurements campaign and neutronics code Verification and Validation (V&V).

stat.ML↗

arXiv2022

Global-in-time $H^1$-stability of L2-1$_σ$ method on general nonuniform meshes for subdiffusion equation

In this work the L2-1$_σ$ method on general nonuniform meshes is studied for the subdiffusion equation. When the time step ratio is no less than $0.475329$, a bilinear form associated with the L2-1$_σ$ fractional-derivative operator is proved to be positive semidefinite and a new global-in-time $H^1$-stability of L2-1$_σ$ schemes is then derived under simple assumptions on the initial condition and the source term. In addition, the sharp $L^2$-norm convergence is proved under the constraint that the time step ratio is no less than $0.475329$.

math.NA↗

arXiv2022

Quantification of Deep Neural Network Prediction Uncertainties for VVUQ of Machine Learning Models

Recent performance breakthroughs in Artificial intelligence (AI) and Machine learning (ML), especially advances in Deep learning (DL), the availability of powerful, easy-to-use ML libraries (e.g., scikit-learn, TensorFlow, PyTorch.), and increasing computational power have led to unprecedented interest in AI/ML among nuclear engineers. For physics-based computational models, Verification, Validation and Uncertainty Quantification (VVUQ) have been very widely investigated and a lot of methodologies have been developed. However, VVUQ of ML models has been relatively less studied, especially in nuclear engineering. In this work, we focus on UQ of ML models as a preliminary step of ML VVUQ, more specifically, Deep Neural Networks (DNNs) because they are the most widely used supervised ML algorithm for both regression and classification tasks. This work aims at quantifying the prediction, or approximation uncertainties of DNNs when they are used as surrogate models for expensive physical models. Three techniques for UQ of DNNs are compared, namely Monte Carlo Dropout (MCD), Deep Ensembles (DE) and Bayesian Neural Networks (BNNs). Two nuclear engineering examples are used to benchmark these methods, (1) time-dependent fission gas release data using the Bison code, and (2) void fraction simulation based on the BFBT benchmark using the TRACE code. It was found that the three methods typically require different DNN architectures and hyperparameters to optimize their performance. The UQ results also depend on the amount of training data available and the nature of the data. Overall, all these three methods can provide reasonable estimations of the approximation uncertainties. The uncertainties are generally smaller when the mean predictions are close to the test data, while the BNN methods usually produce larger uncertainties than MCD and DE.

cs.LG↗

arXiv2021

Bayesian Inverse Uncertainty Quantification of a MOOSE-based Melt Pool Model for Additive Manufacturing Using Experimental Data

Additive manufacturing (AM) technology is being increasingly adopted in a wide variety of application areas due to its ability to rapidly produce, prototype, and customize designs. AM techniques afford significant opportunities in regard to nuclear materials, including an accelerated fabrication process and reduced cost. High-fidelity modeling and simulation (M\&S) of AM processes is being developed in Idaho National Laboratory (INL)'s Multiphysics Object-Oriented Simulation Environment (MOOSE) to support AM process optimization and provide a fundamental understanding of the various physical interactions involved. In this paper, we employ Bayesian inverse uncertainty quantification (UQ) to quantify the input uncertainties in a MOOSE-based melt pool model for AM. Inverse UQ is the process of inversely quantifying the input uncertainties while keeping model predictions consistent with the measurement data. The inverse UQ process takes into account uncertainties from the model, code, and data while simultaneously characterizing the uncertain distributions in the input parameters--rather than merely providing best-fit point estimates. We employ measurement data on melt pool geometry (lengths and depths) to quantify the uncertainties in several melt pool model parameters. Simulation results using the posterior uncertainties have shown improved agreement with experimental data, as compared to those using the prior nominal values. The resulting parameter uncertainties can be used to replace expert opinions in future uncertainty, sensitivity, and validation studies.

stat.AP↗

arXiv2021

Towards Improving the Predictive Capability of Computer Simulations by Integrating Inverse Uncertainty Quantification and Quantitative Validation with Bayesian Hypothesis Testing

The Best Estimate plus Uncertainty (BEPU) approach for nuclear systems modeling and simulation requires that the prediction uncertainty must be quantified in order to prove that the investigated design stays within acceptance criteria. A rigorous Uncertainty Quantification (UQ) process should simultaneously consider multiple sources of quantifiable uncertainties: (1) parameter uncertainty due to randomness or lack of knowledge; (2) experimental uncertainty due to measurement noise; (3) model uncertainty caused by missing/incomplete physics and numerical approximation errors, and (4) code uncertainty when surrogate models are used. In this paper, we propose a comprehensive framework to integrate results from inverse UQ and quantitative validation to provide robust predictions so that all these sources of uncertainties can be taken into consideration. Inverse UQ quantifies the parameter uncertainties based on experimental data while taking into account uncertainties from model, code and measurement. In the validation step, we use a quantitative validation metric based on Bayesian hypothesis testing. The resulting metric, called the Bayes factor, is then used to form weighting factors to combine the prior and posterior knowledge of the parameter uncertainties in a Bayesian model averaging process. In this way, model predictions will be able to integrate the results from inverse UQ and validation to account for all available sources of uncertainties. This framework is a step towards addressing the ANS Nuclear Grand Challenge on "Simulation/Experimentation" by bridging the gap between models and data.

stat.CO↗

arXiv2021

A Comprehensive Survey of Inverse Uncertainty Quantification of Physical Model Parameters in Nuclear System Thermal-Hydraulics Codes

Uncertainty Quantification (UQ) is an essential step in computational model validation because assessment of the model accuracy requires a concrete, quantifiable measure of uncertainty in the model predictions. The concept of UQ in the nuclear community generally means forward UQ (FUQ), in which the information flow is from the inputs to the outputs. Inverse UQ (IUQ), in which the information flow is from the model outputs and experimental data to the inputs, is an equally important component of UQ but has been significantly underrated until recently. FUQ requires knowledge in the input uncertainties which has been specified by expert opinion or user self-evaluation. IUQ is defined as the process to inversely quantify the input uncertainties based on experimental data. This review paper aims to provide a comprehensive and comparative discussion of the major aspects of the IUQ methodologies that have been used on the physical models in system thermal-hydraulics codes. IUQ methods can be categorized by three main groups: frequentist (deterministic), Bayesian (probabilistic), and empirical (design-of-experiments). We used eight metrics to evaluate an IUQ method, including solidity, complexity, accessibility, independence, flexibility, comprehensiveness, transparency, and tractability. Twelve IUQ methods are reviewed, compared, and evaluated based on these eight metrics. Such comparative evaluation will provide a good guidance for users to select a proper IUQ method based on the IUQ problem under investigation.

stat.AP↗

arXiv2021

Direct identification of Mott Hubbard band pattern beyond charge density wave superlattice in monolayer 1T-NbSe2

Understanding Mott insulators and charge density waves (CDW) is critical for both fundamental physics and future device applications. However, the relationship between these two phenomena remains unclear, particularly in systems close to two-dimensional (2D) limit. In this study, we utilize scanning tunneling microscopy/spectroscopy to investigate monolayer 1T-NbSe2 to elucidate the energy of the Mott upper Hubbard band (UHB), and reveal that the spin-polarized UHB is spatially distributed away from the dz2 orbital at the center of the CDW unit. Moreover, the UHB shows a root3 x root3 R30° periodicity in addition to the typically observed CDW pattern. Furthermore, a pattern similar to the CDW order is visible deep in the Mott gap, exhibiting CDW without contribution of the Mott Hubbard band. Based on these findings in monolayer 1T-NbSe2, we provide novel insights into the relation between the correlated and collective electronic structures in monolayer 2D systems.

cond-mat.str-el↗