arXiv Science⌕ Search

arXiv subjects

Xiuze Xia

Publications and source records attributed to Xiuze Xia.

7 recordsLinked to original sources

Recursive Self-Improvement of Exoskeleton Assistance Policies through Human-in-the-Loop Feedback

To reduce reliance on manual design and extensive parameter tuning, a framework for the autonomous evolution of exoskeleton assistance policies through human feedback is proposed. Assistance policies are autonomously generated as executable control code by an intelligent agent and evaluated in experiments with human participants. Subjective user feedback, movement performance, and muscle activation measurements are incorporated into policy assessment. Based on these assessments, policy deficiencies are autonomously identified and the control code is revised by the agent for subsequent trials. A closed loop of policy generation, human feedback, evaluation, and autonomous refinement is thereby established. The framework is evaluated using GPT, DeepSeek, GLM, and Kimi, and initial assistance performance and refinement outcomes are compared across models. Despite differences in initial performance, effective assistance is achieved with all four models after a single autonomous refinement iteration under the tested conditions. Across three tasks, biceps and triceps muscle activation levels are reduced by 29.4% and 35.2%, respectively, compared with those measured without an exoskeleton. However, limited adaptability to unexpected situations is observed, indicating that further improvements in robustness and safety are required.

cs.RO↗

Whole-Body Motion Guided Reference Generation for Uncertainty-Aware Compliant Assistance

Exoskeletons have shown great potential for augmenting human physical capabilities, yet generating reliable assistance remains challenging because human motion patterns and interaction requirements vary substantially in practice. To address this problem, a dual-loop assistance strategy is proposed to couple multimodal exoskeleton trajectory generation with variable admittance control, where trajectory variance links the outer-loop generator and the inner-loop controller. The generator synthesizes future exoskeleton trajectories through denoising, primarily using whole-body human motion and exoskeleton proprioception, with task descriptions as auxiliary semantic cues. To reduce cross-modal representation mismatch, a three-stage training pipeline is introduced to progressively optimize the human motion encoder, the exoskeleton proprioception encoder, and the trajectory generator. In the inner loop, multiple future trajectories are sampled from the generator to estimate the trajectory mean and variance. The mean is used as the control reference, while the variance provides an uncertainty measure for prediction reliability. This measure is further incorporated into a stiffness regulation law, enabling compliant assistance with input-to-state stability under bounded lumped interaction input. Experimental results demonstrate that the proposed method significantly reduces muscle activation levels compared with standard baselines, while also decreasing users' metabolic energy expenditure relative to the unassisted condition.

cs.RO↗

CHOREO: Every Humanoid Skill as a Trajectory

Recent advances in humanoid robotics have produced diverse skills through reinforcement learning, motion imitation, and generative modeling. Yet these capabilities remain siloed because they are built around incompatible representations, interfaces, and controllers. We present CHOREO, a framework for training-free composition of heterogeneous humanoid skills. Our key observation is that, regardless of how a skill is learned, it can ultimately be expressed as an executable motion trajectory. Based on this observation, CHOREO converts each capability into SkillMotion, a unified representation that combines motion states, contacts, semantics, and boundary conditions. Skills are composed through direct continuation, cubic Hermite blending, or validated bridge motions, without retraining source models or updating models at test time. On Unitree G1 in MuJoCo, CHOREO organizes 2,950 admitted SkillMotion assets derived from heterogeneous sources and achieves 95.4\% sequence success across 130 multi-action tasks, including 93.8\% success on eight-action sequences. These results demonstrate that executable trajectories provide a scalable interface for accumulating and composing pretrained humanoid capabilities.

cs.RO↗

Ensuring Interaction Safety in Multitask Exoskeleton Control: A Simulation-Trained Variable Impedance Framework

Wearable exoskeletons can augment human phys ical capabilities during complex activities. However, ensuring adaptation across diverse tasks while guaranteeing interaction safety remains a critical challenge. To address this, a simulation trained variable impedance control approach with stability guarantees is proposed. First, a simulation-based human exoskeleton motion data generation pipeline is established, utilizing Proximal Policy Optimization (PPO) to synthesize human muscle activations while the exoskeleton provides direct compensation for human biological joint torques. Subsequently, the generated dataset is used to train a dual modality policy that fuses semantic instructions with proprioceptive history, enabling the prediction of reference trajectories and variable impedance gains for nine different motion tasks. To guarantee safety, the network outputs are constrained by a stability criterion derived from Lyapunov stability theory, which bounds stiffness variations to ensure the asymptotic stability of the coupled system. Experimental results indicate that the proposed framework reduces metabolic cost in real-world scenarios com pared with standard baseline methods. These findings suggest the feasibility of the proposed framework for safe, multitask exoskeleton control.

cs.RO↗

Motion Adaptation Across Users and Tasks for Exoskeletons via Meta-Learning

Wearable exoskeletons can augment human strength and reduce muscle fatigue during specific tasks. However, developing personalized and task-generalizable assistance algorithms remains a critical challenge. To address this, a meta-imitation learning approach is proposed. This approach leverages a task-specific neural network to predict human elbow joint movements, enabling effective assistance while enhancing generalization to new scenarios. To accelerate data collection, full-body keypoint motions are extracted from publicly available RGB video and motion-capture datasets across multiple tasks, and subsequently retargeted in simulation. Elbow flexion trajectories generated in simulation are then used to train the task-specific neural network within the model-agnostic meta-learning (MAML) framework, which allows the network to rapidly adapt to novel tasks and unseen users with only a few gradient updates. The adapted network outputs personalized references tracked by a gravity-compensated PD controller to ensure stable assistance. Experimental results demonstrate that the exoskeleton significantly reduces both muscle activation and metabolic cost for new users performing untrained tasks, compared to performing without exoskeleton assistance. These findings suggest that the proposed framework effectively improves task generalization and user adaptability for wearable exoskeleton systems.

cs.RO↗

Learning Variable Impedance Skills from Demonstrations with Passivity Guarantee

Robots are increasingly being deployed not only in workplaces but also in households. Effectively execute of manipulation tasks by robots relies on variable impedance control with contact forces. Furthermore, robots should possess adaptive capabilities to handle the considerable variations exhibited by different robotic tasks in dynamic environments, which can be obtained through human demonstrations. This paper presents a learning-from-demonstration framework that integrates force sensing and motion information to facilitate variable impedance control. The proposed approach involves the estimation of full stiffness matrices from human demonstrations, which are then combined with sensed forces and motion information to create a model using the non-parametric method. This model allows the robot to replicate the demonstrated task while also responding appropriately to new task conditions through the use of the state-dependent stiffness profile. Additionally, a novel tank based variable impedance control approach is proposed to ensure passivity by using the learned stiffness. The proposed approach was evaluated using two virtual variable stiffness systems. The first evaluation demonstrates that the stiffness estimated approach exhibits superior robustness compared to traditional methods when tested on manual datasets, and the second evaluation illustrates that the novel tank based approach is more easily implementable compared to traditional variable impedance control approaches.

cs.RO↗

Learning a Stable Dynamic System with a Lyapunov Energy Function for Demonstratives Using Neural Networks

Autonomous Dynamic System (DS)-based algorithms hold a pivotal and foundational role in the field of Learning from Demonstration (LfD). Nevertheless, they confront the formidable challenge of striking a delicate balance between achieving precision in learning and ensuring the overall stability of the system. In response to this substantial challenge, this paper introduces a novel DS algorithm rooted in neural network technology. This algorithm not only possesses the capability to extract critical insights from demonstration data but also demonstrates the capacity to learn a candidate Lyapunov energy function that is consistent with the provided data. The model presented in this paper employs a straightforward neural network architecture that excels in fulfilling a dual objective: optimizing accuracy while simultaneously preserving global stability. To comprehensively evaluate the effectiveness of the proposed algorithm, rigorous assessments are conducted using the LASA dataset, further reinforced by empirical validation through a robotic experiment.

cs.RO↗