arXiv Science⌕ Search

arXiv subjects

Xinliang Zhang

Publications and source records attributed to Xinliang Zhang.

At least 55 records · Page 3Linked to original sources
arXiv2023

Thermo-optic phase shifter based on hydrogen-doped indium oxide microheater

Thermo-optic (TO) phase shifters are very fundamental units in large-scale active silicon photonic integrated circuits (PICs). However, due to the limitation of microheater materials with a trade-off between heating efficiency and absorption loss, designs reported so far typically suffer from slow response time, high power consumption, low yields, and so on. Here, we demonstrate an energy-efficient, fast-response, and low-loss TO phase shifter by introducing hydrogen-doped indium oxide (IHO) films as microheater, and the optimized electron concentration with enhanced mobility endows the IHO high conductivity as well as high near-infrared (NIR) transparency, which allow it to directly contact the silicon waveguide without any insulating layer for efficient tuning and fast response. The TO phase shifter achieves a sub-microsecond response time (970 ns/980 ns) with a π phase shift power consumption of 9.6 mW. And the insertion loss introduced by the IHO microheater is ~ 0.5 dB. The proposed IHO-based microheaters with compatible processing technology illustrate the great potential of such material in the application of large-scale silicon PICs.

physics.optics↗
arXiv2022

Loss-induced high-density multi-mode integrated waveguides array

The integration density of photonic integrated circuits has been limited by light coupling between waveguides. Traditional approaches to layout the waveguide with high density are based on refractive index engineering to suppress the light coupling between waveguides. However, these methods mostly require sophisticated and sensitive structure design, thus lack universality. Herein, we propose high-density multi-mode-multi-core integrated photonic waveguides by inserting high-loss metal strips between waveguides. We have achieved a 10-spatial-channel multi-mode-multi-core waveguide with total occupying spacing of 6.6 um. The multi-mode waveguides have a close spacing of 400 nm. The proposed scheme has high fabrication tolerance, ultra-large bandwidth and good compatibility to the complementary metal-oxide-semiconductor technology. It can be applied to any integration platform, any working waveband and any operating mode, providing a universal solution for high-density photonic circuits.

physics.optics↗
arXiv2022

Design optimization of band-pass filter based on parity-time symmetry coupled-resonant

Integrated optical filter based on microring resonators plays a critical role in many applications, ranging from wavelength division multiplexing and switching to channel routing. Bandwidth tunable filters are capable of meeting the on-demand flexible operations in complex situations, due to their advantages of scalability, multi-function, and energy-saving. It has been investigated recently that parity-time (PT) symmetry coupled-resonant systems can be applied to the bandwidth-tunable filters. However, due to the trade-off between the bandwidth-tunable contrast ratio and insertion loss of system, the bandwidth-tunable contrast ratio of this method is severely limited. Here, the bandwidth-tunable contrast ratio is defined as the maximum bandwidth divided by the minimum bandwidth. In this work, we show that high bandwidth-tunable contrast ratio and low insertion loss of system can be achieved simultaneously by increasing the coupling strength between the input port and the resonant. System characterizations under different coupling states reveal that the low insertion loss can be obtained when the system initially operates at the over-coupling condition. A high bandwidth-tunable contrast ratio PT-symmetry band-pass filter with moderate insertion loss is shown on the Silicon platform. Our scheme provides an effective method to reduce the insertion loss of on-chip tunable filters, which is also applicable to the high-order cascaded microring systems.

physics.optics↗
arXiv2022

Fully-integrated multipurpose microwave frequency identification system on a single chip

We demonstrate a fully-integrated multipurpose microwave frequency identification system on silicon-on-insulator platform. Thanks to its multipurpose features, the chip is able to identify different types of microwave signals, including single-frequency, multiple-frequency, chirped and frequency-hopping microwave signals, as well as discriminate instantaneous frequency variation among the frequency-modulated signals. This demonstration exhibits fully integrated solution and fully functional microwave frequency identification, which can meet the requirements in reduction of size, weight and power for future advanced microwave photonic processor.

eess.SP↗
arXiv2022

SVD-Embedded Deep Autoencoder for MIMO Communications

Using a deep autoencoder (DAE) for end-to-end communication in multiple-input multiple-output (MIMO) systems is a novel concept with significant potential. DAE-aided MIMO has been shown to outperform singular-value decomposition (SVD)-based precoded MIMO in terms of bit error rate (BER). This paper proposes embedding left- and right-singular vectors of the channel matrix into DAE encoder and decoder to further improve the performance of the MIMO DAE. SVDembedded DAE largely outperforms theoretic linear precoding in terms of BER. This is remarkable since it demonstrates that DAEs have significant potential to exceed the limits of current system design by treating the communication system as a single, end-to-end optimization block. Based on the simulation results, at SNR=10dB, the proposed SVD-embedded design can achieve a BER of about $10^{-5}$ and reduce the BER at least 10 times compared with existing DAE without SVD, and up to 18 times compared with theoretical linear precoding. We attribute this to the fact that the proposed DAE can match the input and output as an adaptive modulation structure with finite alphabet input. We also observe that adding residual connections to the DAE further improves the performance.

cs.IT↗
arXiv2021

Complex Rotation-based Linear Precoding for Physical Layer Multicasting and SWIPT

With the goal of improving spectral efficiency, complex rotation-based precoding and power allocation schemes are developed for two multiple-input multiple-output (MIMO) communication systems, namely, simultaneous wireless information and power transfer (SWIPT) and physical layer multicasting. While the state-of-the-art solutions for these problems use very different approaches, the proposed approach treats them similarly using a general tool and works efficiently for any number of antennas at each node. Through modeling the precoder using complex rotation matrices, objective functions (transmission rates) of the above systems can be formulated and solved in a similar structure. Hence, this approach simplifies signaling design for MIMO systems and can reduce the hardware complexity by having one set of parameters to optimize. Extensive numerical results show that the proposed approach outperforms state-of-the-art solutions for both problems. It increases transmission rates for multicasting and achieves higher rate-energy regions in the SWIPT case. In both cases, the improvement is significant (20%-30%) in practically important settings where the users have one or two antennas. Furthermore, the new precoders are less time-consuming than the existing solutions.

cs.IT↗
arXiv2021

Room-temperature continuous-wave upconversion white microlaser in a rare-earth doped microcavity

White laser covering the visible color spectrum is critical in various applications including vivid display, holographic imaging and light-based version of Wi-Fi, but it is still challenging to realize the white microlaser due to the rigorous requirement in the balance between the optical gain and the feedback at different wavelengths. Here, we employ Tm, Er and Yb ions corporately for the upconversion white lasing in a single ultrahigh quality (Q) (up to 108) doped microcavity, where the thresholds of the red, green and blue lasers are about 90, 500 and 300 μW, respectively. To the best of our knowledge, it is the first rare-earth elements based room-temperature, continuous-wave white microlaser, which exhibits relatively stable chromaticity over 180 minutes, making it possible for practical applications.

physics.optics↗
arXiv2021

Chiral polarizer based on encircling EP

Encircling an exceptional point (EP) in a parity-time (PT) symmetric system has shown great potential for chiral optical devices, such as chiral mode switching for symmetric and anti-symmetric modes. However, the chiral switching for polarization states has never been reported although chiral polarization manipulation has significant applications in imaging, sensing, and communication etc. Here inspired by the anti-PT symmetry, we demonstrate an on-chip chiral polarizer by constructing polarization-coupled anti-PT symmetric system for the first time. The transmission axes of the chiral polarizer are different for forward and backward propagation. A polarization extinction ratio of over 10 dB is achieved for both propagating directions. Moreover, a telecommunication experiment is performed to demonstrate the potential applications in polarization encoding signals. It provides a novel functionality for encircling-an-EP parametric evolution and offer a new approach for on-chip chiral polarization manipulation.

physics.optics↗
arXiv2021

Non-Hermitian singularities induced single-mode depletion and soliton formation in microresonators

On-chip manipulation of single resonance over broad background comb spectra of microring resonators is indispensable, ranging from tailoring laser emission, optical signal processing to non-classical light generation, yet challenging without scarifying the quality factor or inducing additional dispersive effects. Here, we propose an experimentally feasible platform to realize on-chip selective depletion of single resonance in microring with decoupled dispersion and dissipation, which are usually entangled by Kramer-Kroning relation. Thanks to the existence of non-Hermitian singularity, unsplit but significantly increased dissipation of the selected resonance is achieved due to the simultaneous collapse of eigenvalues and eigenvectors, fitting elegantly the requirement of pure single-mode depletion. With delicate yet experimentally feasible parameters, we show explicit evidence of modulation instability as well as deterministic single soliton generation in microresonators induced by depletion in normal and anomalous dispersion regime, respectively. Our findings connect non-Hermitian singularities to wide range of applications associated with selective single mode manipulation in microwave photonics, quantum optics, ultrafast optics and beyond.

physics.optics↗
arXiv2021

Canalization acoustic phonon polaritons in metal-MoO3-metal sandwiched structures for nano-light guiding and manipulation

We theoretically propose and study in-plane anisotropic acoustic phonon polaritons (APhPs) based on a layered structure consisting of a monolayer (or few layers) α-phase molybdenum trioxide (α-MoO3) sandwiched between two metal layers. We find that the APhPs in the proposed sandwiched structures are a canalization (highly directional) electromagnetic mode propagating along with the layers and at the same time exhibit extreme electromagnetic-field confinement surpassing any other type of phonon-polariton modes. When a double layer of α-MoO3 is sandwiched by two Au layers, twisting the two α-MoO3 layers can adjust the interlayer polaritonic coupling and thus manipulate the in-plane propagation of the highly confined APhPs. Our results illustrate that the metal-MoO3-metal sandwiched structures are a promising platform for light guiding and manipulation at ultimate scale.

physics.optics↗
arXiv2021

Simultaneous ultraviolet, visible and near-infrared continuous-wave lasing in a rare-earth-doped microcavity

Microlaser with multiple lasing bands is critical in various applications, such as full-colour display, optical communications and computing. Here, we propose a simple and efficient method for homogeneously doping rare earth elements into a silica whispering-gallery-mode microcavity. By this method, we demonstrate simultaneous and stable lasing covering ultraviolet, visible and near-infrared bands in an ultrahigh-Q (exceeding 108) Er-Yb co-doped silica microsphere under room temperature and continuous-wave pump for the first time. The lasing thresholds of the 380, 410, 450, 560, 660, 800, 1080 and 1550 nm-bands are estimated to be 380, 150, 2.5, 12, 0.17, 1.7, 10 and 38 μW, respectively, where the lasing in the 380, 410 and 450 nm-bands by Er element have not been separately demonstrated under room temperature and continuous-wave pump until this work. This ultrahigh-Q doped microcavity is an excellent platform for high-performance multi-band microlasers, ultrahigh-precise sensors, optical memories and cavity-enhanced light-matter interaction studies.

physics.optics↗
arXiv2021

Fast-response silicon photonic microheater induced by parity-time symmetry breaking

Thermo-optic microheater is indispensable in silicon photonic devices for smart and reconfigurable photonic networks. Much efforts have been made to improve the metallic microheater performance in the past decades. However, because of the metallic nature of light absorption, placing the metallic microheater very close to the waveguide for fast response is impractical and has not been done experimentally. Here, we experimentally demonstrate a metallic microheater placed very close to the waveguide based on parity-time (PT) symmetry breaking. The intrinsic high loss of metallic heater ensures the system will operate in the PT-symmetry-broken region, which guarantee the low loss of light in the silicon waveguide. Moreover, heating at a close range significantly reduces the response time. A fast response time of ~1 us is achieved without introducing extra loss. The insertion loss is only 0.1 dB for the long heater. The modulation bandwidth is 280 kHz, which is an order of magnitude improvement when compared with that of the mainstream thermo-optic phase shifters. To verify the capability of large-scale integration, a 1*8 phased array for beam steering is also demonstrated experimentally with the PT-symmetry-broken metallic heaters. Our work provides a novel design concept for low-loss fast-response optical switches with dissipative materials and offers a new approach to enhance the performance of thermo-optic phase shifters.

physics.app-ph↗
arXiv2020

A Rotation-based Method for Precoding in Gaussian MIMOME Channels

The problem of maximizing secrecy rate of multiple-input multiple-output multiple-eavesdropper (MIMOME) channels with arbitrary numbers of antennas at each node is studied in this paper. First, the optimization problem corresponding to the secrecy capacity of the MIMOME channel is converted to an equivalent optimization based on Givens rotations and eigenvalue decomposition of the covariance matrix. In this new formulation, precoder is a rotation matrix which results in a positive semi-definite (PSD) covariance matrix by construction. This removes the PSD matrix constraint and makes the problem easier to tackle. Next, a Broyden-Fletcher-Goldfarb-Shanno (BFGS)-based algorithm is developed to find the rotation and power allocation parameters. Further, the generalized singular value decomposition (GSVD)-based precoding is used to initialize this algorithm. The proposed rotation-BFGS method provides an efficient approach to find a near-optimal transmit strategy for the MIMOME channel and outperforms various state-of-the-art analytical and numerical methods. In particular, the rotation BFGS precoding achieves higher secrecy rates than the celebrated GSVD precoding, with a reasonably higher computational complexity. Extensive numerical results elaborate on the effectiveness of the rotation-BFGS precoding. The new framework developed in this paper can be applied to a variety of similar problems in the context of multi-antenna channels with and without secrecy.

cs.IT↗
arXiv2020

Multi-Objective DNN-based Precoder for MIMO Communications

This paper introduces a unified deep neural network (DNN)-based precoder for two-user multiple-input multiple-output (MIMO) networks with five objectives: data transmission, energy harvesting, simultaneous wireless information and power transfer, physical layer (PHY) security, and multicasting. First, a rotation-based precoding is developed to solve the above problems independently. Rotation-based precoding is new precoding and power allocation that beats existing solutions in PHY security and multicasting and is reliable in different antenna settings. Next, a DNN-based precoder is designed to unify the solution for all objectives. The proposed DNN concurrently learns the solutions given by conventional methods, i.e., analytical or rotation-based solutions. A binary vector is designed as an input feature to distinguish the objectives. Numerical results demonstrate that, compared to the conventional solutions, the proposed DNN-based precoder reduces on-the-fly computational complexity more than an order of magnitude while reaching near-optimal performance (99.45\% of the averaged optimal solutions). The new precoder is also more robust to the variations of the numbers of antennas at the receivers.

cs.LG↗
arXiv2020

Multimode silicon photonics using on-chip geometrical-optics

On-chip optical interconnect has been widely accepted as a promising technology to realize future large-scale multiprocessors. Mode-division multiplexing (MDM) provides a new degree of freedom for optical interconnects to dramatically increase the link capacity. Present on-chip multimode devices are based on traditional wave-optics. Although large amount of computation and optimization are adopted to support more modes, mode-independent manipulation is still hard to be achieved due to severe mode dispersion. Here, we propose a universal solution to standardize the design of fundamental multimode building blocks, by introducing a geometrical-optics-like concept adopting waveguide width larger than the working wavelength. The proposed solution can tackle a group of modes at the same time with very simple processes, avoiding demultiplexing procedure and ensuring compact footprint. Compare to conventional schemes, it is scalable to larger mode channels without increasing the complexity and whole footprint. As a proof of concept, we demonstrate a set of multimode building blocks including crossing, bend, coupler and switches. Low losses of multimode waveguide crossing and bend are achieved, as well as ultra-low power consumption of the multimode switch is realized since it enables reconfigurable routing for a group of modes simultaneously. Our work promotes the multimode photonics research and makes the MDM technique more practical.

physics.optics↗
arXiv2020

Discrete optics in optomechanical waveguide arrays

Propagation properties of light in optomechanical waveguides arrays (OMWAs) are studied for the first time, to the best of our knowledge. Due to the strong mechanical Kerr effect, the optical self-focusing and self-defocusing phenomena can be realized in the arrays of subwavelength dielectric optomechanical waveguides with the milliwatt-level incident powers and micrometer-level lengths. Compared with the conventional nonlinear waveguide arrays, the required incident powers and lengths of the waveguides are decreased by five orders of magnitude and one order of magnitude, respectively. Furthermore, by adjusting the deformation of the nanowaveguides through a control light, the propagation path of the signal light in the OMWA can be engineered, which could be used as a splitting-ratio-tunable beam splitter. This work provides a new platform for discrete optics and broadens the application of integrated optomechanics.

physics.optics↗