arXiv subjects

Xingang Wang

Publications and source records attributed to Xingang Wang.

At least 19 recordsLinked to original sources

arXiv2026

Zero2Skill: Bootstrapping Robot Skills through Autonomous Data Collection, Training, and Deployment

Autonomous data collection governs the volume and quality of real-world trajectories for manipulation policy learning. Existing pipelines reduce human effort via self-resetting, VLM verification, or language-guided correction, yet episode-scoped fixes must be reissued whenever the same failure recurs, so oversight cost grows with session length rather than with the number of distinct problems. We present Zero2Skill, a human-robot symbiotic agentic system in which corrections are retained and reused across rounds. The collection loop collects, verifies, and resets autonomously, pausing for a remote operator only when a phase exhausts an explicit retry budget. An LLM parser maps each natural-language utterance to a structured adjustment stored in Corrective Memory, so addressed failure modes typically need not be corrected again under the same conditions. On a real-robot desktop-clearing testbed, Zero2Skill matches teleoperation episode success while reducing human working time to 16%. Language corrections improve verifier-human agreement in all four evaluated settings and raise average single-attempt success from 12.5% to 47.5% (arm-selection: 20.0% to 50.0%). Policies fine-tuned on Zero2Skill data match teleoperation-trained policy success at a fraction of collection human cost.

cs.RO↗

arXiv2026

Beyond the Edge of Chaos: Stability-Expressivity Transfer in Reservoir Forecasting

The edge-of-chaos heuristic has long served as a guiding principle for designing reservoir computers, yet its relevance to machine performance remains elusive. Here, taking the spectral radius of the reservoir network as the control parameter, we show that the radius yielding the best forecasting performance does not coincide with the Lyapunov edge of the isolated, teacher-forced, or closed-loop generative reservoir. By analyzing the collective dynamics of the teacher-forced reservoir, we find that the target dynamics are represented mainly by stable Lyapunov modes whose finite-time stability is strongly modulated by the input. This finding motivates a stability-expressivity transfer index, which balances the stability of these modes against their expressivity in representing the target. Across chaotic and quasiperiodic targets, and for both asymmetric and symmetric reservoirs, this index accurately identifies the optimal spectral radius for autonomous forecasting.

nlin.CD↗

arXiv2026

Evolution-Level Quantum Optimal Control of Single-Qubit Gates with Physics-Informed Neural Networks

Quantum gate design is often represented as pulse optimization, although the physical object that implements a gate is the full controlled evolution generated by the pulse. Here we use physics-informed neural networks to represent single-qubit gate design at this evolution level: the control fields, the Bloch-state trajectories, and the total duration are learned together under the Bloch equation. This changes the optimized object from pulse amplitudes to a differentiable physical process whose structure can be inspected and refined. For rotation gates, the optimized evolutions recover the physical organization expected for bounded single-qubit control, with no prescribed pulse ansatz or duration scan. For a geometric gate, the representation identifies localized bottlenecks in maintaining the geometric condition and turns this diagnosis into feedback, reducing the residual path error while preserving high fidelity. Thus physics-informed learning is used not only to synthesize gates, but also to make optimized quantum controls physically readable, diagnosable, and locally refinable. This process-level view may be especially useful for adapting gates to hardware-specific, task-specific, and locally varying experimental constraints.

quant-ph↗

arXiv2026

Inferring bifurcation diagrams of two distinct chaotic systems by a single machine

We propose a dual-channel reservoir-computing scheme for inferring the dynamics of two distinct chaotic systems with a single machine. By augmenting a standard reservoir with a system-label channel and a parameter-control channel, the machine can be trained from time series collected from a few sampled states of the two systems. We show that the trained machine not only predicts the short-time evolution of the sampled states, but also reproduces the long-term statistical properties of unseen states, thereby enabling reconstruction of the bifurcation diagrams of both systems from partial observations. The effectiveness of the scheme is demonstrated for the Lorenz and Rössler systems in numerical simulations and for the Chua and Rossler circuits in experiments. Functional-network analysis further shows that the two target systems are encoded by distinct dynamical patterns in the reservoir. These results extend multifunctional and parameter-aware reservoir computing, and provide a route to data-driven inference of multiple nonlinear systems using a single machine.

nlin.CD↗

arXiv2026

ReconPhys: Reconstruct Appearance and Physical Attributes from Single Video

Reconstructing non-rigid objects with physical plausibility remains a significant challenge. Existing approaches leverage differentiable rendering for per-scene optimization, recovering geometry and dynamics but requiring expensive tuning or manual annotation, which limits practicality and generalizability. To address this, we propose ReconPhys, the first feedforward framework that jointly learns physical attribute estimation and 3D Gaussian Splatting reconstruction from a single monocular video. Our method employs a dual-branch architecture trained via a self-supervised strategy, eliminating the need for ground-truth physics labels. Given a video sequence, ReconPhys simultaneously infers geometry, appearance, and physical attributes. Experiments on a large-scale synthetic dataset demonstrate superior performance: our method achieves 21.64 PSNR in future prediction compared to 13.27 by state-of-the-art optimization baselines, while reducing Chamfer Distance from 0.349 to 0.004. Crucially, ReconPhys enables fast inference (<1 second) versus hours required by existing methods, facilitating rapid generation of simulation-ready assets for robotics and graphics.

cs.CV↗

arXiv2026

AG-VAS: Anchor-Guided Zero-Shot Visual Anomaly Segmentation with Large Multimodal Models

Large multimodal models (LMMs) exhibit strong task generalization capabilities, offering new opportunities for zero-shot visual anomaly segmentation (ZSAS). However, existing LMM-based segmentation approaches still face fundamental limitations: anomaly concepts are inherently abstract and context-dependent, lacking stable visual prototypes, and the weak alignment between high-level semantic embeddings and pixel-level spatial features hinders precise anomaly localization. To address these challenges, we present AG-VAS (Anchor-Guided Visual Anomaly Segmentation), a new framework that expands the LMM vocabulary with three learnable semantic anchor tokens-[SEG], [NOR], and [ANO], establishing a unified anchor-guided segmentation paradigm. Specifically, [SEG] serves as an absolute semantic anchor that translates abstract anomaly semantics into explicit, spatially grounded visual entities (e.g., holes or scratches), while [NOR] and [ANO] act as relative anchors that model the contextual contrast between normal and abnormal patterns across categories. To further enhance cross-modal alignment, we introduce a Semantic-Pixel Alignment Module (SPAM) that aligns language-level semantic embeddings with high-resolution visual features, along with an Anchor-Guided Mask Decoder (AGMD) that performs anchor-conditioned mask prediction for precise anomaly localization. In addition, we curate Anomaly-Instruct20K, a large-scale instruction dataset that organizes anomaly knowledge into structured descriptions of appearance, shape, and spatial attributes, facilitating effective learning and integration of the proposed semantic anchors. Extensive experiments on six industrial and medical benchmarks demonstrate that AG-VAS achieves consistent state-of-the-art performance in the zero-shot setting.

cs.CV↗

arXiv2026

UniDriveDreamer: A Single-Stage Multimodal World Model for Autonomous Driving

World models have demonstrated significant promise for data synthesis in autonomous driving. However, existing methods predominantly concentrate on single-modality generation, typically focusing on either multi-camera video or LiDAR sequence synthesis. In this paper, we propose UniDriveDreamer, a single-stage unified multimodal world model for autonomous driving, which directly generates multimodal future observations without relying on intermediate representations or cascaded modules. Our framework introduces a LiDAR-specific variational autoencoder (VAE) designed to encode input LiDAR sequences, alongside a video VAE for multi-camera images. To ensure cross-modal compatibility and training stability, we propose Unified Latent Anchoring (ULA), which explicitly aligns the latent distributions of the two modalities. The aligned features are fused and processed by a diffusion transformer that jointly models their geometric correspondence and temporal evolution. Additionally, structured scene layout information is projected per modality as a conditioning signal to guide the synthesis. Extensive experiments demonstrate that UniDriveDreamer outperforms previous state-of-the-art methods in both video and LiDAR generation, while also yielding measurable improvements in downstream

cs.CV↗

arXiv2025

Motion-R1: Enhancing Motion Generation with Decomposed Chain-of-Thought and RL Binding

Text-to-Motion generation has become a fundamental task in human-machine interaction, enabling the synthesis of realistic human motions from natural language descriptions. Although recent advances in large language models and reinforcement learning have contributed to high-quality motion generation, two major challenges remain. Existing approaches often fail to capture the temporal and causal complexities inherent in natural language, leading to oversimplified or incoherent motions. Additionally, RL-based methods are frequently overly complex, hindering their scalability and adaptability across various motion generation tasks. To address these challenges, we propose Motion-R1, a novel framework that combines decomposed Chain-of-Thought reasoning with reinforcement learning to enhance both the quality and interpretability of generated motions. Specifically, we introduce the Decomposed CoT Data Engine, which leverages an automated pipeline to synthesize high-quality reasoning data, allowing the model to better capture the temporal dependencies and causal relationships of human motion. We also propose RL Binding, a reinforcement learning strategy that incorporates multi-modal text-motion alignment into the RL reward function, guiding the model to produce motions that are both semantically accurate and motionally realistic. Extensive experiments across benchmark datasets demonstrate that Motion-R1 achieves state-of-the-art performance, with a 3.5% improvement in MM-Dist on HumanML3D and improvements in R-Precision and FID on KIT-ML and BABEL, surpassing existing methods across key metrics and highlighting its superior capability in handling complex motion generation tasks. Project page: https://motion-r1.github.io/.

cs.CV↗

arXiv2025

HumanDreamer-X: Photorealistic Single-image Human Avatars Reconstruction via Gaussian Restoration

Single-image human reconstruction is vital for digital human modeling applications but remains an extremely challenging task. Current approaches rely on generative models to synthesize multi-view images for subsequent 3D reconstruction and animation. However, directly generating multiple views from a single human image suffers from geometric inconsistencies, resulting in issues like fragmented or blurred limbs in the reconstructed models. To tackle these limitations, we introduce \textbf{HumanDreamer-X}, a novel framework that integrates multi-view human generation and reconstruction into a unified pipeline, which significantly enhances the geometric consistency and visual fidelity of the reconstructed 3D models. In this framework, 3D Gaussian Splatting serves as an explicit 3D representation to provide initial geometry and appearance priority. Building upon this foundation, \textbf{HumanFixer} is trained to restore 3DGS renderings, which guarantee photorealistic results. Furthermore, we delve into the inherent challenges associated with attention mechanisms in multi-view human generation, and propose an attention modulation strategy that effectively enhances geometric details identity consistency across multi-view. Experimental results demonstrate that our approach markedly improves generation and reconstruction PSNR quality metrics by 16.45% and 12.65%, respectively, achieving a PSNR of up to 25.62 dB, while also showing generalization capabilities on in-the-wild data and applicability to various human reconstruction backbone models.

cs.CV↗

arXiv2025

MimicDreamer: Aligning Human and Robot Demonstrations for Scalable VLA Training

Vision Language Action (VLA) models derive their generalization capability from diverse training data, yet collecting embodied robot interaction data remains prohibitively expensive. In contrast, human demonstration videos are far more scalable and cost-efficient to collect, and recent studies confirm their effectiveness in training VLA models. However, a significant domain gap persists between human videos and robot-executed videos, including unstable camera viewpoints, visual discrepancies between human hands and robotic arms, and differences in motion dynamics. To bridge this gap, we propose MimicDreamer, a framework that turns fast, low-cost human demonstrations into robot-usable supervision by jointly aligning vision, viewpoint, and actions to directly support policy training. For visual alignment, we propose H2R Aligner, a video diffusion model that generates high-fidelity robot demonstration videos by transferring motion from human manipulation footage. For viewpoint stabilization, EgoStabilizer is proposed, which canonicalizes egocentric videos via homography and inpaints occlusions and distortions caused by warping. For action alignment, we map human hand trajectories to the robot frame and apply a constrained inverse kinematics solver to produce feasible, low-jitter joint commands with accurate pose tracking. Empirically, VLA models trained purely on our synthesized human-to-robot videos achieve few-shot execution on real robots. Moreover, scaling training with human data significantly boosts performance compared to models trained solely on real robot data; our approach improves the average success rate by 14.7\% across six representative manipulation tasks.

cs.RO↗

arXiv2025

Scalable Training for Vector-Quantized Networks with 100% Codebook Utilization

Vector quantization (VQ) is a key component in discrete tokenizers for image generation, but its training is often unstable due to straight-through estimation bias, one-step-behind updates, and sparse codebook gradients, which lead to suboptimal reconstruction performance and low codebook usage. In this work, we analyze these fundamental challenges and provide a simple yet effective solution. To maintain high codebook usage in VQ networks (VQN) during learning annealing and codebook size expansion, we propose VQBridge, a robust, scalable, and efficient projector based on the map function method. VQBridge optimizes code vectors through a compress-process-recover pipeline, enabling stable and effective codebook training. By combining VQBridge with learning annealing, our VQN achieves full (100%) codebook usage across diverse codebook configurations, which we refer to as FVQ (FullVQ). Through extensive experiments, we demonstrate that FVQ is effective, scalable, and generalizable: it attains 100% codebook usage even with a 262k-codebook, achieves state-of-the-art reconstruction performance, consistently improves with larger codebooks, higher vector channels, or longer training, and remains effective across different VQ variants. Moreover, when integrated with LlamaGen, FVQ significantly enhances image generation performance, surpassing visual autoregressive models (VAR) by 0.5 and diffusion models (DiT) by 0.2 rFID, highlighting the importance of high-quality tokenizers for strong autoregressive image generation.

cs.CV↗

arXiv2025

DictAS: A Framework for Class-Generalizable Few-Shot Anomaly Segmentation via Dictionary Lookup

Recent vision-language models (e.g., CLIP) have demonstrated remarkable class-generalizable ability to unseen classes in few-shot anomaly segmentation (FSAS), leveraging supervised prompt learning or fine-tuning on seen classes. However, their cross-category generalization largely depends on prior knowledge of real seen anomaly samples. In this paper, we propose a novel framework, namely DictAS, which enables a unified model to detect visual anomalies in unseen object categories without any retraining on the target data, only employing a few normal reference images as visual prompts. The insight behind DictAS is to transfer dictionary lookup capabilities to the FSAS task for unseen classes via self-supervised learning, instead of merely memorizing the normal and abnormal feature patterns from the training set. Specifically, DictAS mainly consists of three components: (1) Dictionary Construction - to simulate the index and content of a real dictionary using features from normal reference images. (2) Dictionary Lookup - to retrieve queried region features from the dictionary via a sparse lookup strategy. When a query feature cannot be retrieved, it is classified as an anomaly. (3) Query Discrimination Regularization - to enhance anomaly discrimination by making abnormal features harder to retrieve from the dictionary. To achieve this, Contrastive Query Constraint and Text Alignment Constraint are further proposed. Extensive experiments on seven public industrial and medical datasets demonstrate that DictAS consistently outperforms state-of-the-art FSAS methods.

cs.CV↗

arXiv2025

Deep Skin Lesion Segmentation with Transformer-CNN Fusion: Toward Intelligent Skin Cancer Analysis

This paper proposes a high-precision semantic segmentation method based on an improved TransUNet architecture to address the challenges of complex lesion structures, blurred boundaries, and significant scale variations in skin lesion images. The method integrates a transformer module into the traditional encoder-decoder framework to model global semantic information, while retaining a convolutional branch to preserve local texture and edge features. This enhances the model's ability to perceive fine-grained structures. A boundary-guided attention mechanism and multi-scale upsampling path are also designed to improve lesion boundary localization and segmentation consistency. To verify the effectiveness of the approach, a series of experiments were conducted, including comparative studies, hyperparameter sensitivity analysis, data augmentation effects, input resolution variation, and training data split ratio tests. Experimental results show that the proposed model outperforms existing representative methods in mIoU, mDice, and mAcc, demonstrating stronger lesion recognition accuracy and robustness. In particular, the model achieves better boundary reconstruction and structural recovery in complex scenarios, making it well-suited for the key demands of automated segmentation tasks in skin lesion analysis.

eess.IV↗

arXiv2025

A Reinforcement Learning-Driven Task Scheduling Algorithm for Multi-Tenant Distributed Systems

This paper addresses key challenges in task scheduling for multi-tenant distributed systems, including dynamic resource variation, heterogeneous tenant demands, and fairness assurance. An adaptive scheduling method based on reinforcement learning is proposed. By modeling the scheduling process as a Markov decision process, the study defines the state space, action space, and reward function. A scheduling policy learning framework is designed using Proximal Policy Optimization (PPO) as the core algorithm. This enables dynamic perception of complex system states and real-time decision-making. Under a multi-objective reward mechanism, the scheduler jointly optimizes task latency, resource utilization, and tenant fairness. The coordination between the policy network and the value network continuously refines the scheduling strategy. This enhances overall system performance. To validate the effectiveness of the proposed method, a series of experiments were conducted in multi-scenario environments built using a real-world public dataset. The experiments evaluated task latency control, resource efficiency, policy stability, and fairness. The results show that the proposed method outperforms existing scheduling approaches across multiple evaluation metrics. It demonstrates strong stability and generalization ability. The proposed scheduling framework provides practical and engineering value in policy design, dynamic resource modeling, and multi-tenant service assurance. It effectively improves scheduling efficiency and resource management in distributed systems under complex conditions.

cs.DC↗

arXiv2025

DynImg: Key Frames with Visual Prompts are Good Representation for Multi-Modal Video Understanding

In recent years, the introduction of Multi-modal Large Language Models (MLLMs) into video understanding tasks has become increasingly prevalent. However, how to effectively integrate temporal information remains a critical research focus. Traditional approaches treat spatial and temporal information separately. Due to issues like motion blur, it is challenging to accurately represent the spatial information of rapidly moving objects. This can lead to temporally important regions being underemphasized during spatial feature extraction, which in turn hinders accurate spatio-temporal interaction and video understanding. To address this limitation, we propose an innovative video representation method called Dynamic-Image (DynImg). Specifically, we introduce a set of non-key frames as temporal prompts to highlight the spatial areas containing fast-moving objects. During the process of visual feature extraction, these prompts guide the model to pay additional attention to the fine-grained spatial features corresponding to these regions. Moreover, to maintain the correct sequence for DynImg, we employ a corresponding 4D video Rotary Position Embedding. This retains both the temporal and spatial adjacency of DynImg, helping MLLM understand the spatio-temporal order within this combined format. Experimental evaluations reveal that DynImg surpasses the state-of-the-art methods by approximately 2% across multiple video understanding benchmarks, proving the effectiveness of our temporal prompts in enhancing video comprehension.

cs.CV↗

arXiv2025

ReconDreamer++: Harmonizing Generative and Reconstructive Models for Driving Scene Representation

Combining reconstruction models with generative models has emerged as a promising paradigm for closed-loop simulation in autonomous driving. For example, ReconDreamer has demonstrated remarkable success in rendering large-scale maneuvers. However, a significant gap remains between the generated data and real-world sensor observations, particularly in terms of fidelity for structured elements, such as the ground surface. To address these challenges, we propose ReconDreamer++, an enhanced framework that significantly improves the overall rendering quality by mitigating the domain gap and refining the representation of the ground surface. Specifically, ReconDreamer++ introduces the Novel Trajectory Deformable Network (NTDNet), which leverages learnable spatial deformation mechanisms to bridge the domain gap between synthesized novel views and original sensor observations. Moreover, for structured elements such as the ground surface, we preserve geometric prior knowledge in 3D Gaussians, and the optimization process focuses on refining appearance attributes while preserving the underlying geometric structure. Experimental evaluations conducted on multiple datasets (Waymo, nuScenes, PandaSet, and EUVS) confirm the superior performance of ReconDreamer++. Specifically, on Waymo, ReconDreamer++ achieves performance comparable to Street Gaussians for the original trajectory while significantly outperforming ReconDreamer on novel trajectories. In particular, it achieves substantial improvements, including a 6.1% increase in NTA-IoU, a 23. 0% improvement in FID, and a remarkable 4.5% gain in the ground surface metric NTL-IoU, highlighting its effectiveness in accurately reconstructing structured elements such as the road surface.

cs.CV↗

arXiv2025

EmbodieDreamer: Advancing Real2Sim2Real Transfer for Policy Training via Embodied World Modeling

The rapid advancement of Embodied AI has led to an increasing demand for large-scale, high-quality real-world data. However, collecting such embodied data remains costly and inefficient. As a result, simulation environments have become a crucial surrogate for training robot policies. Yet, the significant Real2Sim2Real gap remains a critical bottleneck, particularly in terms of physical dynamics and visual appearance. To address this challenge, we propose EmbodieDreamer, a novel framework that reduces the Real2Sim2Real gap from both the physics and appearance perspectives. Specifically, we propose PhysAligner, a differentiable physics module designed to reduce the Real2Sim physical gap. It jointly optimizes robot-specific parameters such as control gains and friction coefficients to better align simulated dynamics with real-world observations. In addition, we introduce VisAligner, which incorporates a conditional video diffusion model to bridge the Sim2Real appearance gap by translating low-fidelity simulated renderings into photorealistic videos conditioned on simulation states, enabling high-fidelity visual transfer. Extensive experiments validate the effectiveness of EmbodieDreamer. The proposed PhysAligner reduces physical parameter estimation error by 3.74% compared to simulated annealing methods while improving optimization speed by 89.91\%. Moreover, training robot policies in the generated photorealistic environment leads to a 29.17% improvement in the average task success rate across real-world tasks after reinforcement learning. Code, model and data will be publicly available.

cs.RO↗

arXiv2025

GigaVideo-1: Advancing Video Generation via Automatic Feedback with 4 GPU-Hours Fine-Tuning

Recent progress in diffusion models has greatly enhanced video generation quality, yet these models still require fine-tuning to improve specific dimensions like instance preservation, motion rationality, composition, and physical plausibility. Existing fine-tuning approaches often rely on human annotations and large-scale computational resources, limiting their practicality. In this work, we propose GigaVideo-1, an efficient fine-tuning framework that advances video generation without additional human supervision. Rather than injecting large volumes of high-quality data from external sources, GigaVideo-1 unlocks the latent potential of pre-trained video diffusion models through automatic feedback. Specifically, we focus on two key aspects of the fine-tuning process: data and optimization. To improve fine-tuning data, we design a prompt-driven data engine that constructs diverse, weakness-oriented training samples. On the optimization side, we introduce a reward-guided training strategy, which adaptively weights samples using feedback from pre-trained vision-language models with a realism constraint. We evaluate GigaVideo-1 on the VBench-2.0 benchmark using Wan2.1 as the baseline across 17 evaluation dimensions. Experiments show that GigaVideo-1 consistently improves performance on almost all the dimensions with an average gain of about 4% using only 4 GPU-hours. Requiring no manual annotations and minimal real data, GigaVideo-1 demonstrates both effectiveness and efficiency. Code, model, and data will be publicly available.

cs.CV↗