arXiv subjects

Xin Zhou

Publications and source records attributed to Xin Zhou.

At least 325 records · Page 18Linked to original sources

arXiv2022

Geometrically Constrained Trajectory Optimization for Multicopters

We present an optimization-based framework for multicopter trajectory planning subject to geometrical configuration constraints and user-defined dynamic constraints. The basis of the framework is a novel trajectory representation built upon our novel optimality conditions for unconstrained control effort minimization. We design linear-complexity operations on this representation to conduct spatial-temporal deformation under various planning requirements. Smooth maps are utilized to exactly eliminate geometrical constraints in a lightweight fashion. A variety of state-input constraints are supported by the decoupling of dense constraint evaluation from sparse parameterization, and backward differentiation of flatness map. As a result, this framework transforms a generally constrained multicopter planning problem into an unconstrained optimization that can be solved reliably and efficiently. Our framework bridges the gaps among solution quality, planning efficiency, and constraint fidelity for a multicopter with limited resources and maneuvering capability. Its generality and robustness are both demonstrated by applications to different flight tasks. Extensive simulations and benchmarks are also conducted to show its capability of generating high-quality solutions while retaining the computation speed against other specialized methods by orders of magnitude. The source code of our framework is available at: https://github.com/ZJU-FAST-Lab/GCOPTER

cs.RO↗

arXiv2022

Capacitively coupled distinct mechanical resonators for room temperature phonon-cavity electromechanics

Coupled electromechanical resonators that can be independently driven/detected and easily integrated with external circuits are essential for exploring mechanical modes based signal processing. Here, we present a room temperature phonon-cavity electromechanical system, consisting of two distinct resonators: a silicon nitride electromechanical drum capacitively coupled to an aluminum one. We demonstrate electromechanically induced transparency and amplification in a two-tone driving scheme and observe the phonon-cavity force affecting the mechanical damping rates of both movable objects. We also develop an analytical model based on linearly coupled motion equations, which captures the optomechanical features in the classical limit and enables to fit quantitatively our measurements. Our results open up new possibilities in the study of phonon-cavity based signal processing in the classical and potentially in the future in the quantum regimes.

cond-mat.mes-hall↗

arXiv2022

Predicting and Explaining Mobile UI Tappability with Vision Modeling and Saliency Analysis

We use a deep learning based approach to predict whether a selected element in a mobile UI screenshot will be perceived by users as tappable, based on pixels only instead of view hierarchies required by previous work. To help designers better understand model predictions and to provide more actionable design feedback than predictions alone, we additionally use ML interpretability techniques to help explain the output of our model. We use XRAI to highlight areas in the input screenshot that most strongly influence the tappability prediction for the selected region, and use k-Nearest Neighbors to present the most similar mobile UIs from the dataset with opposing influences on tappability perception.

cs.HC↗

arXiv2022

ASM-Loc: Action-aware Segment Modeling for Weakly-Supervised Temporal Action Localization

Weakly-supervised temporal action localization aims to recognize and localize action segments in untrimmed videos given only video-level action labels for training. Without the boundary information of action segments, existing methods mostly rely on multiple instance learning (MIL), where the predictions of unlabeled instances (i.e., video snippets) are supervised by classifying labeled bags (i.e., untrimmed videos). However, this formulation typically treats snippets in a video as independent instances, ignoring the underlying temporal structures within and across action segments. To address this problem, we propose \system, a novel WTAL framework that enables explicit, action-aware segment modeling beyond standard MIL-based methods. Our framework entails three segment-centric components: (i) dynamic segment sampling for compensating the contribution of short actions; (ii) intra- and inter-segment attention for modeling action dynamics and capturing temporal dependencies; (iii) pseudo instance-level supervision for improving action boundary prediction. Furthermore, a multi-step refinement strategy is proposed to progressively improve action proposals along the model training process. Extensive experiments on THUMOS-14 and ActivityNet-v1.3 demonstrate the effectiveness of our approach, establishing new state of the art on both datasets. The code and models are publicly available at~\url{https://github.com/boheumd/ASM-Loc}.

cs.CV↗

arXiv2022

Bribery in Rating Systems: A Game-Theoretic Perspective

Rating systems play a vital role in the exponential growth of service-oriented markets. As highly rated online services usually receive substantial revenue in the markets, malicious sellers seek to boost their service evaluation by manipulating the rating system with fake ratings. One effective way to improve the service evaluation is to hire fake rating providers by bribery. The fake ratings given by the bribed buyers influence the evaluation of the service, which further impacts the decision-making of potential buyers. In this paper, we study the bribery of a rating system with multiple sellers and buyers via a game-theoretic perspective. In detail, we examine whether there exists an equilibrium state in the market in which the rating system is expected to be bribery-proof: no bribery strategy yields a strictly positive gain. We first collect real-world data for modeling the bribery problem in rating systems. On top of that, we analyze the problem of bribery in a rating system as a static game. From our analysis, we conclude that at least a Nash equilibrium can be reached in the bribery game of rating systems.

cs.GT↗

arXiv2022

Microwave Optomechanically Induced Transparency and Absorption Between 250 and 450 mK

High-quality microwave amplifiers and notch-filters can be made from microwave optomechanical systems in which a mechanical resonator is coupled to a microwave cavity by radiation pressure. These amplifiers and filters rely on optomechanically induced transparency (OMIT) and absorption (OMIA), respectively. Such devices can amplify microwave signals with large, controllable gain, high dynamic range and very low noise. Furthermore, extremely narrowband filters can be constructed with this technique. We briefly review previous measurements of microwave OMIT and OMIA before reporting our own measurements of these phenomena, which cover a larger parameter space than has been explored in previous works. In particular, we vary probe frequency, pump frequency, pumping scheme (red or blue), probe power, pump power and temperature. We find excellent agreement between our measurements and the predictions of input/output theory, thereby guiding further development of microwave devices based on nanomechanics.

quant-ph↗

arXiv2022

Towards a Systematic Survey for Carbon Neutral Data Centers

Data centers are carbon-intensive enterprises due to their massive energy consumption, and it is estimated that data center industry will account for 8\% of global carbon emissions by 2030. However, both technological and policy instruments for reducing or even neutralizing data center carbon emissions have not been thoroughly investigated. To bridge this gap, this survey paper proposes a roadmap towards carbon-neutral data centers that takes into account both policy instruments and technological methodologies. We begin by presenting the carbon footprint of data centers, as well as some insights into the major sources of carbon emissions. Following that, carbon neutrality plans for major global cloud providers are discussed to summarize current industrial efforts in this direction. In what follows, we introduce the carbon market as a policy instrument to explain how to offset data center carbon emissions in a cost-efficient manner. On the technological front, we propose achieving carbon-neutral data centers by increasing renewable energy penetration, improving energy efficiency, and boosting energy circulation simultaneously. A comprehensive review of existing technologies on these three topics is elaborated subsequently. Based on this, a multi-pronged approach towards carbon neutrality is envisioned and a digital twin-powered industrial artificial intelligence (AI) framework is proposed to make this solution a reality. Furthermore, three key scientific challenges for putting such a framework in place are discussed. Finally, several applications for this framework are presented to demonstrate its enormous potential.

cs.CY↗

arXiv2022

Min-max minimal hypersurfaces with higher multiplicity

We exhibit the first set of examples of non-bumpy metrics on the $(n+1)$-sphere ($2\leq n\leq 6$) in which the varifold associated with the two-parameter min-max construction must be a multiplicity-two minimal $n$-sphere. This is proved by a new area-and-separation estimate for certain minimal hypersurfaces with Morse index two inspired by an early work of Colding-Minicozzi. We also construct non-bumpy projective spaces in which the first min-max hypersurfaces are one-sided, and non-bumpy balls in which the free boundary min-max hypersurfaces are improper.

math.DG↗

arXiv2021

Carrier Phase Ranging for Indoor Positioning with 5G NR Signals

Indoor positioning is one of the core technologies of Internet of Things (IoT) and artificial intelligence (AI), and is expected to play a significant role in the upcoming era of AI. However, affected by the complexity of indoor environments, it is still highly challenging to achieve continuous and reliable indoor positioning. Currently, 5G cellular networks are being deployed worldwide, the new technologies of which have brought the approaches for improving the performance of wireless indoor positioning. In this paper, we investigate the indoor positioning under the 5G new radio (NR), which has been standardized and being commercially operated in massive markets. Specifically, a solution is proposed and a software defined receiver (SDR) is developed for indoor positioning. With our SDR indoor positioning system, the 5G NR signals are firstly sampled by universal software radio peripheral (USRP), and then, coarse synchronization is achieved via detecting the start of the synchronization signal block (SSB). Then, with the assistance of the pilots transmitted on the physical broadcasting channel (PBCH), multipath acquisition and delay tracking are sequentially carried out to estimate the time of arrival (ToA) of received signals. Furthermore, to improve the ToA ranging accuracy, the carrier phase of the first arrived path is estimated. Finally, to quantify the accuracy of our ToA estimation method, indoor field tests are carried out in an office environment, where a 5G NR base station (known as gNB) is installed for commercial use. Our test results show that, in the static test scenarios, the ToA accuracy measured by the 1-σ error interval is about 0.5 m, while in the pedestrian mobile environment, the probability of range accuracy within 0.8 m is 95%.

eess.SP↗

arXiv2021

Preliminary analysis on the noise characteristics of MWISP data

Noise is a significant part within a millimeter-wave molecular line datacube. Analyzing the noise improves our understanding of noise characteristics, and further contributes to scientific discoveries. We measure the noise level of a single datacube from MWISP and perform statistical analyses. We identified major factors which increase the noise level of a single datacube, including bad channels, edge effects, baseline distortion and line contamination. Cleaning algorithms are applied to remove or reduce these noise components. As a result, we obtained the cleaned datacube in which noise follows a positively skewed normal distribution. We further analyzed the noise structure distribution of a 3D mosaicked datacube in the range l = 40°.7 to 43°.3 and b = -2°.3 to 0°.3 and found that noise in the final mosaicked datacube is mainly characterized by noise fluctuation among the cells.

astro-ph.GA↗

arXiv2021

VUT: Versatile UI Transformer for Multi-Modal Multi-Task User Interface Modeling

User interface modeling is inherently multimodal, which involves several distinct types of data: images, structures and language. The tasks are also diverse, including object detection, language generation and grounding. In this paper, we present VUT, a Versatile UI Transformer that takes multimodal input and simultaneously accomplishes 5 distinct tasks with the same model. Our model consists of a multimodal Transformer encoder that jointly encodes UI images and structures, and performs UI object detection when the UI structures are absent in the input. Our model also consists of an auto-regressive Transformer model that encodes the language input and decodes output, for both question-answering and command grounding with respect to the UI. Our experiments show that for most of the tasks, when trained jointly for multi-tasks, VUT substantially reduces the number of models and footprints needed for performing multiple tasks, while achieving accuracy exceeding or on par with baseline models trained for each individual task.

cs.CV↗

arXiv2021

Feedback from $γ$~Cassiopeiae: Large Expanding Cavity, Accelerating Cometary Globules, and Peculiar X-ray Emission

We present wide-field multi-wavelength observations of $γ$ Cassiopeiae (or $γ$~Cas for short) in order to study its feedback toward the interstellar environment. A large expanding cavity is discovered toward $γ$~Cas in the neutral hydrogen (HI) images at a systemic velocity of about -10 km/s. The measured dimension of the cavity is roughly 2.0 deg $\times$ 1.4 deg (or 6.0 pc $\times$ 4.2 pc at a distance of 168 pc), while the expansion velocity is about 5.0$\pm$0.5 km/s. The CO observations reveal systematic velocity gradients in IC63 (about 20 km/s/pc) and IC59 (about 30 km/s/pc), two cometary globules illuminated by $γ$~Cas, proving fast acceleration of the globules under stellar radiation pressure. The gas kinematics indicate that the cavity is opened by strong stellar wind, which has high potential to lead to the peculiar X-ray emission observed in $γ$~Cas. Our result favors a recent new scenario that emphasizes the roles of stellar wind and binarity in the X-ray emission of the $γ$~Cas stars.

astro-ph.SR↗

arXiv2021

Existence of constant mean curvature 2-spheres in Riemannian 3-spheres

We prove the existence of branched immersed constant mean curvature 2-spheres in an arbitrary Riemannian 3-sphere for almost every prescribed mean curvature, and moreover for all prescribed mean curvatures when the 3-sphere is positively curved. To achieve this, we develop a min-max scheme for a weighted Dirichlet energy functional. There are three main ingredients in our approach: a bi-harmonic approximation procedure to obtain compactness of the new functional, a derivative estimate of the min-max values to gain energy upper bounds for min-max sequences for almost every choice of mean curvature, and a Morse index estimate to obtain another uniform energy bound required to reach the remaining constant mean curvatures in the presence of positive curvature.

math.DG↗

arXiv2021

Plug-Tagger: A Pluggable Sequence Labeling Framework Using Language Models

Plug-and-play functionality allows deep learning models to adapt well to different tasks without requiring any parameters modified. Recently, prefix-tuning was shown to be a plug-and-play method on various text generation tasks by simply inserting corresponding continuous vectors into the inputs. However, sequence labeling tasks invalidate existing plug-and-play methods since different label sets demand changes to the architecture of the model classifier. In this work, we propose the use of label word prediction instead of classification to totally reuse the architecture of pre-trained models for sequence labeling tasks. Specifically, for each task, a label word set is first constructed by selecting a high-frequency word for each class respectively, and then, task-specific vectors are inserted into the inputs and optimized to manipulate the model predictions towards the corresponding label words. As a result, by simply switching the plugin vectors on the input, a frozen pre-trained language model is allowed to perform different tasks. Experimental results on three sequence labeling tasks show that the performance of the proposed method can achieve comparable performance with standard fine-tuning with only 0.1\% task-specific parameters. In addition, our method is up to 70 times faster than non-plug-and-play methods while switching different tasks under the resource-constrained scenario.

cs.CL↗

arXiv2021

Creating User Interface Mock-ups from High-Level Text Descriptions with Deep-Learning Models

The design process of user interfaces (UIs) often begins with articulating high-level design goals. Translating these high-level design goals into concrete design mock-ups, however, requires extensive effort and UI design expertise. To facilitate this process for app designers and developers, we introduce three deep-learning techniques to create low-fidelity UI mock-ups from a natural language phrase that describes the high-level design goal (e.g. "pop up displaying an image and other options"). In particular, we contribute two retrieval-based methods and one generative method, as well as pre-processing and post-processing techniques to ensure the quality of the created UI mock-ups. We quantitatively and qualitatively compare and contrast each method's ability in suggesting coherent, diverse and relevant UI design mock-ups. We further evaluate these methods with 15 professional UI designers and practitioners to understand each method's advantages and disadvantages. The designers responded positively to the potential of these methods for assisting the design process.

cs.HC↗

arXiv2021

Microwave optomechanical measurement of non-metallized SiN strings at mK temperatures

The mechanical properties of amorphous materials (glasses) at low temperatures are dominated by effects of low energy excitations that are thought to be atomic-scale tunneling two level systems (TTLS). In nanometer-scale glass samples, the temperature dependence of the sound speed and dissipation is modified relative to that of bulk glass samples. In addition to this size effect, the usual presence of a polycrystalline metal in nanomechanical resonators leads to a further departure from the well-studied behavior of insulating bulk glass. We report a dual chip optomechanical measurement technique used to characterize non-metallized amorphous SiN strings at low temperatures. A harp consisting of SiN strings of width 350 nm and lengths 40 to 80 $μ$m is coupled to an Al superconducting microwave cavity on a separate chip. The strings are driven dielectrically and their motion is detected via its modulation of the microwave resonance frequency.

cond-mat.mes-hall↗

arXiv2021

Generic scarring for minimal hypersurfaces along stable hypersurfaces

Let $M^{n+1}$ be a closed manifold of dimension $3\leq n+1\leq 7$. We show that for a $C^\infty$-generic metric $g$ on $M$, to any connected, closed, embedded, $2$-sided, stable, minimal hypersurface $S\subset (M,g)$ corresponds a sequence of closed, embedded, minimal hypersurfaces $\{Σ_k\}$ scarring along $S$, in the sense that the area and Morse index of $Σ_k$ both diverge to infinity and, when properly renormalized, $Σ_k$ converges to $S$ as varifolds. We also show that scarring of immersed minimal surfaces along stable surfaces occurs in most closed Riemannian $3$-manifods.

math.DG↗

arXiv2021

A Morphological Classification of 18190 Molecular Clouds Identified in $^{12}$CO Data from the MWISP Survey

We attempt to visually classify the morphologies of 18190 molecular clouds, which are identified in the $^{12}$CO(1-0) spectral line data over $\sim$ 450 deg$^{2}$ of the second Galactic quadrant from the Milky Way Imaging Scroll Painting project (MWISP). Using the velocity-integrated intensity maps of the $^{12}$CO(1-0) emission, molecular clouds are first divided into unresolved and resolved ones. The resolved clouds are further classified as non-filaments or filaments. Among the 18190 molecular clouds, $\sim$ 25 $\%$ are unresolved, $\sim$ 64$\%$ are non-filaments, and $\sim$ 11$\%$ are filaments. In the terms of the integrated flux of $^{12}$CO(1-0) spectra of the whole 18190 molecular clouds, $\sim$ 90$\%$ are from filaments, $\sim$ 9$\%$ are from non-filaments, and the rest $\sim$ 1$\%$ are from unresolved sources. Although non-filaments are dominant in the number of the discrete molecular clouds, filaments are the main contributor of $^{12}$CO emission flux. We also present the number distributions of physical parameters of the molecular clouds in our catalog, including their angular sizes, velocity spans, peak intensities of $^{12}$CO(1-0) emission, and $^{12}$CO(1-0) total fluxes. We find that there is a systematic difference between the angular sizes of the non-filaments and filaments, with the filaments tending to have larger angular scales. The H$_{2}$ column densities of them are not significantly different. We also discuss the observational effects, such as those induced by the finite spatial resolution, beam dilution and line-of-sight projection, on the morphological classification of molecular clouds in our sample.

astro-ph.GA↗