arXiv subjects

Xin Chen

Publications and source records attributed to Xin Chen.

At least 559 records · Page 31Linked to original sources

arXiv2021

Tristable flow states and reversal of the large-scale circulation in two-dimensional circular convection cells

We present a numerical study of the flow states and reversals of the large-scale circulation (LSC) in a two-dimensional circular Rayleigh-Bénard cell. Long-time direct numerical simulations are carried out in the Rayleigh number ($Ra$) range $10^{7} \le Ra \le 10^{8}$ and Prandtl number ($Pr$) range $2.0 \le Pr \le 20.0$. We found that a new, long-lived, chaotic flow state exists, in addition to the commonly observed circulation states (the LSC in the clockwise and counterclockwise directions). The circulation states consist of one primary roll in the middle and two secondary rolls near the top and bottom circular walls. The primary roll becomes stronger and larger, while the two secondary rolls diminish, with increasing $Ra$. Our results suggest that the reversal of the LSC is accompanied by the secondary rolls growing, breaking the primary roll and then connecting to form a new primary roll with reversed direction. We mapped out the phase diagram of the existence of the LSC and the reversal in the $Ra$-$Pr$ space, which reveals that the flow is in the circulation states when $Ra$ is large and $Pr$ is small. The reversal of the LSC can only occur in a limited $Pr$ range. The phase diagram can be understood in terms of competition between the thermal and viscous diffusions. We also found that the internal flow states manifested themselves into global properties such as Nusselt and Reynolds numbers.

physics.flu-dyn↗

arXiv2020

Structural phase transition in monolayer gold(I) telluride: From a room-temperature topologicalinsulator to an auxetic semiconductor

Structural phase transitions between semiconductors and topological insulators have rich applications in nanoelectronics but are rarely found in two-dimensional (2D) materials. In this work, by combining ab initio computations and evolutionary structure search, we investigate two stable 2D forms of gold(I) telluride (Au$_{2}$Te) with square symmetry, noted as s(I)- and s(II)-Au$_{2}$Te. s(II)-Au$_{2}$Te is the global minimum structure and is a room-temperature topological insulator. s(I)-Au$_{2}$Te is a direct-gap semiconductor with high carrier mobilities and unusual in-plane negative Poisson's ratio. Both s(I) and s(II) phases have ultra-low Young's modulus, implying high flexibility. By applying a small tensile strain, s(II)-Au$_{2}$Te can be transformed into s(I)-Au$_{2}$Te. Hence, a structural phase transition from a room-temperature topological insulator to an auxetic semiconductor is found in the 2D forms of Au$_{2}$Te, which enables potential applications in phase-change electronic devices. Moreover, we elucidate the mechanism of the phase transition with the help of phonon spectra and group theory analysis.

cond-mat.mtrl-sci↗

arXiv2020

Fitting the Search Space of Weight-sharing NAS with Graph Convolutional Networks

Neural architecture search has attracted wide attentions in both academia and industry. To accelerate it, researchers proposed weight-sharing methods which first train a super-network to reuse computation among different operators, from which exponentially many sub-networks can be sampled and efficiently evaluated. These methods enjoy great advantages in terms of computational costs, but the sampled sub-networks are not guaranteed to be estimated precisely unless an individual training process is taken. This paper owes such inaccuracy to the inevitable mismatch between assembled network layers, so that there is a random error term added to each estimation. We alleviate this issue by training a graph convolutional network to fit the performance of sampled sub-networks so that the impact of random errors becomes minimal. With this strategy, we achieve a higher rank correlation coefficient in the selected set of candidates, which consequently leads to better performance of the final architecture. In addition, our approach also enjoys the flexibility of being used under different hardware constraints, since the graph convolutional network has provided an efficient lookup table of the performance of architectures in the entire search space.

cs.LG↗

arXiv2020

Certifiably Optimal Sparse Sufficient Dimension Reduction

Sufficient dimension reduction (SDR) is a popular tool in regression analysis, which replaces the original predictors with a minimal set of their linear combinations. However, the estimated linear combinations generally contain all original predictors, which brings difficulties in interpreting the results, especially when the number of predictors is large. In this paper, we propose a customized branch and bound algorithm, optimal sparse generalized eigenvalue problem (Optimal SGEP), which combines a SGEP formulation of many SDR methods and efficient and accurate bounds allowing the algorithm to converge quickly. Optimal SGEP exactly solves the underlying non-convex optimization problem and thus produces certifiably optimal solutions. We demonstrate the effectiveness of the proposed algorithm through simulation studies.

stat.CO↗

arXiv2020

Anomaly Detection in Time Series with Triadic Motif Fields and Application in Atrial Fibrillation ECG Classification

In the time-series analysis, the time series motifs and the order patterns in time series can reveal general temporal patterns and dynamic features. Triadic Motif Field (TMF) is a simple and effective time-series image encoding method based on triadic time series motifs. Electrocardiography (ECG) signals are time-series data widely used to diagnose various cardiac anomalies. The TMF images contain the features characterizing the normal and Atrial Fibrillation (AF) ECG signals. Considering the quasi-periodic characteristics of ECG signals, the dynamic features can be extracted from the TMF images with the transfer learning pre-trained convolutional neural network (CNN) models. With the extracted features, the simple classifiers, such as the Multi-Layer Perceptron (MLP), the logistic regression, and the random forest, can be applied for accurate anomaly detection. With the test dataset of the PhysioNet Challenge 2017 database, the TMF classification model with the VGG16 transfer learning model and MLP classifier demonstrates the best performance with the 95.50% ROC-AUC and 88.43% F1 score in the AF classification. Besides, the TMF classification model can identify AF patients in the test dataset with high precision. The feature vectors extracted from the TMF images show clear patient-wise clustering with the t-distributed Stochastic Neighbor Embedding technique. Above all, the TMF classification model has very good clinical interpretability. The patterns revealed by symmetrized Gradient-weighted Class Activation Mapping have a clear clinical interpretation at the beat and rhythm levels.

cs.LG↗

arXiv2020

Multi-feature driven active contour segmentation model for infrared image with intensity inhomogeneity

Infrared (IR) image segmentation is essential in many urban defence applications, such as pedestrian surveillance, vehicle counting, security monitoring, etc. Active contour model (ACM) is one of the most widely used image segmentation tools at present, but the existing methods only utilize the local or global single feature information of image to minimize the energy function, which is easy to cause false segmentations in IR images. In this paper, we propose a multi-feature driven active contour segmentation model to handle IR images with intensity inhomogeneity. Firstly, an especially-designed signed pressure force (SPF) function is constructed by combining the global information calculated by global average gray information and the local multi-feature information calculated by local entropy, local standard deviation and gradient information. Then, we draw upon adaptive weight coefficient calculated by local range to adjust the afore-mentioned global term and local term. Next, the SPF function is substituted into the level set formulation (LSF) for further evolution. Finally, the LSF converges after a finite number of iterations, and the IR image segmentation result is obtained from the corresponding convergence result. Experimental results demonstrate that the presented method outperforms the state-of-the-art models in terms of precision rate and overlapping rate in IR test images.

cs.CV↗

arXiv2020

Attention Aware Cost Volume Pyramid Based Multi-view Stereo Network for 3D Reconstruction

We present an efficient multi-view stereo (MVS) network for 3D reconstruction from multiview images. While previous learning based reconstruction approaches performed quite well, most of them estimate depth maps at a fixed resolution using plane sweep volumes with a fixed depth hypothesis at each plane, which requires densely sampled planes for desired accuracy and therefore is difficult to achieve high resolution depth maps. In this paper we introduce a coarseto-fine depth inference strategy to achieve high resolution depth. This strategy estimates the depth map at coarsest level, while the depth maps at finer levels are considered as the upsampled depth map from previous level with pixel-wise depth residual. Thus, we narrow the depth searching range with priori information from previous level and construct new cost volumes from the pixel-wise depth residual to perform depth map refinement. Then the final depth map could be achieved iteratively since all the parameters are shared between different levels. At each level, the self-attention layer is introduced to the feature extraction block for capturing the long range dependencies for depth inference task, and the cost volume is generated using similarity measurement instead of the variance based methods used in previous work. Experiments were conducted on both the DTU benchmark dataset and recently released BlendedMVS dataset. The results demonstrated that our model could outperform most state-of-the-arts (SOTA) methods. The codebase of this project is at https://github.com/ArthasMil/AACVP-MVSNet.

cs.CV↗

arXiv2020

Quenched invariance principle for long range random walks in balanced random environments

We establish via a probabilistic approach the quenched invariance principle for a class of long range random walks in independent (but not necessarily identically distributed) balanced random environments, with the transition probability from $x$ to $y$ on average being comparable to $|x-y|^{-(d+α)}$ with $α\in (0,2]$. We use the martingale property to estimate exit time from balls and establish tightness of the scaled processes, and apply the uniqueness of the martingale problem to identify the limiting process. When $α\in (0,1)$, our approach works even for non-balanced cases. When $α=2$, under a diffusive with the logarithmic perturbation scaling, we show that the limit of scaled processes is a Brownian motion.

math.PR↗

arXiv2020

Spin torque gate magnetic field sensor

Spin-orbit torque provides an efficient pathway to manipulate the magnetic state and magnetization dynamics of magnetic materials, which is crucial for energy-efficient operation of a variety of spintronic devices such as magnetic memory, logic, oscillator, and neuromorphic computing. Here, we describe and experimentally demonstrate a strategy for the realization of a spin torque gate magnetic field sensor with extremely simple structure by exploiting the longitudinal field dependence of the spin torque driven magnetization switching. Unlike most magnetoresistance sensors which require a delicate magnetic bias to achieve a linear response to the external field, the spin torque gate sensor can achieve the same without any magnetic bias, which greatly simplifies the sensor structure. Furthermore, by driving the sensor using an ac current, the dc offset is automatically suppressed, which eliminates the need for a bridge or compensation circuit. We verify the concept using the newly developed WTe2/Ti/CoFeB trilayer and demonstrate that the sensor can work linearly in the range of 3-10 Oe with negligible dc offset.

cond-mat.mes-hall↗

arXiv2020

Correlation of internal flow structure with heat transfer efficiency in turbulent Rayleigh-Bénard convection

To understand how internal flow structures manifest themselves in the global heat transfer, we study the correlation between different flow modes and the instantaneous Nusselt number ($Nu$) in a two-dimensional square Rayleigh-Bénard convection cell. High-resolution and long-time direct numerical simulations are carried out for Rayleigh numbers between $10^{7}$ and $10^{9}$ and a Prandtl number of 5.3. The investigated Nusselt numbers include the volume-averaged $Nu_{\text{vol}}$, the wall-averaged $Nu_{\text{wall}}$, the kinetic energy dissipation based $Nu_{\text{kinetic}}$, and the thermal energy dissipation based $Nu_{\text{thermal}}$. The Fourier mode decomposition and proper orthogonal decomposition are adopted to extract the coherent flow structure. Our results show that the single-roll mode, the horizontally stacked double-roll mode, and the quadrupolar flow mode are more efficient for heat transfer on average. In contrast, the vertically stacked double-roll mode is inefficient for heat transfer on average. The volume-averaged $Nu_{\text{vol}}$ and the kinetic energy dissipation based $Nu_{\text{kinetic}}$ can better reproduce the correlation of internal flow structures with heat transfer efficiency than that of the wall-averaged $Nu_{\text{wall}}$ and the thermal energy dissipation based $Nu_{\text{thermal}}$, even though these four Nusselt numbers give consistent time-averaged mean values. The ensemble-averaged time trace of $Nu$ during flow reversal shows that only the volume-averaged $Nu_{\text{vol}}$ can reproduce the overshoot phenomena that is observed in the previous experimental study. Our results reveal that the proper choice of $Nu$ is critical to obtain a meaningful interpretation.

physics.flu-dyn↗

arXiv2020

A study of backward stochastic differential equation on a Riemannian manifold

Suppose $N$ is a compact Riemannian manifold, in this paper we will introduce the definition of $N$-valued BSDE and $L^2(\mathbb{T}^m;N)$-valued BSDE for which the solution are not necessarily staying in only one local coordinate. Moreover, the global existence of a solution to $L^2(\mathbb{T}^m;N)$-valued BSDE will be proved without any convexity condition on $N$.

math.PR↗

arXiv2020

Palettailor: Discriminable Colorization for Categorical Data

We present an integrated approach for creating and assigning color palettes to different visualizations such as multi-class scatterplots, line, and bar charts. While other methods separate the creation of colors from their assignment, our approach takes data characteristics into account to produce color palettes, which are then assigned in a way that fosters better visual discrimination of classes. To do so, we use a customized optimization based on simulated annealing to maximize the combination of three carefully designed color scoring functions: point distinctness, name difference, and color discrimination. We compare our approach to state-ofthe-art palettes with a controlled user study for scatterplots and line charts, furthermore we performed a case study. Our results show that Palettailor, as a fully-automated approach, generates color palettes with a higher discrimination quality than existing approaches. The efficiency of our optimization allows us also to incorporate user modifications into the color selection process.

cs.GR↗

arXiv2020

The ABC130 barrel module prototyping programme for the ATLAS strip tracker

For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.

physics.ins-det↗

arXiv2020

Attention Distillation for Learning Video Representations

We address the challenging problem of learning motion representations using deep models for video recognition. To this end, we make use of attention modules that learn to highlight regions in the video and aggregate features for recognition. Specifically, we propose to leverage output attention maps as a vehicle to transfer the learned representation from a motion (flow) network to an RGB network. We systematically study the design of attention modules, and develop a novel method for attention distillation. Our method is evaluated on major action benchmarks, and consistently improves the performance of the baseline RGB network by a significant margin. Moreover, we demonstrate that our attention maps can leverage motion cues in learning to identify the location of actions in video frames. We believe our method provides a step towards learning motion-aware representations in deep models. Our project page is available at https://aptx4869lm.github.io/AttentionDistillation/

cs.CV↗

arXiv2020

Weight-Sharing Neural Architecture Search: A Battle to Shrink the Optimization Gap

Neural architecture search (NAS) has attracted increasing attentions in both academia and industry. In the early age, researchers mostly applied individual search methods which sample and evaluate the candidate architectures separately and thus incur heavy computational overheads. To alleviate the burden, weight-sharing methods were proposed in which exponentially many architectures share weights in the same super-network, and the costly training procedure is performed only once. These methods, though being much faster, often suffer the issue of instability. This paper provides a literature review on NAS, in particular the weight-sharing methods, and points out that the major challenge comes from the optimization gap between the super-network and the sub-architectures. From this perspective, we summarize existing approaches into several categories according to their efforts in bridging the gap, and analyze both advantages and disadvantages of these methodologies. Finally, we share our opinions on the future directions of NAS and AutoML. Due to the expertise of the authors, this paper mainly focuses on the application of NAS to computer vision problems and may bias towards the work in our group.

cs.CV↗

arXiv2020

Balancing Common Treatment and Epidemic Control in Medical Procurement during COVID-19: Transform-and-Divide Evolutionary Optimization

Balancing common disease treatment and epidemic control is a key objective of medical supplies procurement in hospitals during a pandemic such as COVID-19. This problem can be formulated as a bi-objective optimization problem for simultaneously optimizing the effects of common disease treatment and epidemic control. However, due to the large number of supplies, difficulties in evaluating the effects, and the strict budget constraint, it is difficult for existing evolutionary multiobjective algorithms to efficiently approximate the Pareto front of the problem. In this paper, we present an approach that first transforms the original high-dimensional, constrained multiobjective optimization problem to a low-dimensional, unconstrained multiobjective optimization problem, and then evaluates each solution to the transformed problem by solving a set of simple single-objective optimization subproblems, such that the problem can be efficiently solved by existing evolutionary multiobjective algorithms. We applied the transform-and-divide evolutionary optimization approach to six hospitals in Zhejiang Province, China, during the peak of COVID-19. Results showed that the proposed approach exhibits significantly better performance than that of directly solving the original problem. Our study has also shown that transform-and-divide evolutionary optimization based on problem-specific knowledge can be an efficient solution approach to many other complex problems and, therefore, enlarge the application field of evolutionary algorithms.

cs.NE↗

arXiv2020

Secure Computation Framework for Multiple Data Providers Against Malicious Adversaries

Due to the great development of secure multi-party computation, many practical secure computation schemes have been proposed. As an example, different secure auction mechanisms have been widely studied, which can protect bid privacy while satisfying various economic properties. However, as far as we know, none of them solve the secure computation problems for multiple data providers (e.g., secure cloud resource auctions) in the malicious security model. In this paper, we use the techniques of cut-and-choose and garbled circuits to propose a general secure computation framework for multiple data providers against malicious adversaries. Specifically, our framework checks input consistency with the cut-and-choose paradigm, conducts maliciously secure computations by running two independent garbled circuits, and verifies the correctness of output by comparing two versions of outputs. Theoretical analysis shows that our framework is secure against a malicious computation party, or a subset of malicious data providers. Taking secure cloud resource auctions as an example, we implement our framework. Extensive experimental evaluations show that the performance of the proposed framework is acceptable in practice.

cs.CR↗

arXiv2020

Search for boosted dark matter with high-Z material in underground experiments

We propose to search for a boosted dark matter (DM) particle from astrophysical sources using an emulsion detector in deep underground facilities. We further propose using high-$Z$ material such as the lead for a larger DM-nucleus coherent scattering cross section above a threshold. The boosted DM will scatter into an excited DM. While the nuclear recoil energy is not detected, the decay products from the excited DM can be recorded by the proposed detector. Backgrounds such as the high energy solar neutrinos can be controlled by the reconstructed track topology. The proposed detector has the potential to find a boosted DM in the sub-GeV mass region, and in certain parameter space, an observation can be made while there is no sensitivity in other large-volume detectors such as Super-K.

hep-ph↗