arXiv Science⌕ Search

arXiv subjects

Xiaoyu Liu

Publications and source records attributed to Xiaoyu Liu.

At least 181 records · Page 10Linked to original sources

Histogram Transform Ensembles for Large-scale Regression

We propose a novel algorithm for large-scale regression problems named histogram transform ensembles (HTE), composed of random rotations, stretchings, and translations. First of all, we investigate the theoretical properties of HTE when the regression function lies in the Hölder space $C^{k,α}$, $k \in \mathbb{N}_0$, $α\in (0,1]$. In the case that $k=0, 1$, we adopt the constant regressors and develop the naïve histogram transforms (NHT). Within the space $C^{0,α}$, although almost optimal convergence rates can be derived for both single and ensemble NHT, we fail to show the benefits of ensembles over single estimators theoretically. In contrast, in the subspace $C^{1,α}$, we prove that if $d \geq 2(1+α)/α$, the lower bound of the convergence rates for single NHT turns out to be worse than the upper bound of the convergence rates for ensemble NHT. In the other case when $k \geq 2$, the NHT may no longer be appropriate in predicting smoother regression functions. Instead, we apply kernel histogram transforms (KHT) equipped with smoother regressors such as support vector machines (SVMs), and it turns out that both single and ensemble KHT enjoy almost optimal convergence rates. Then we validate the above theoretical results by numerical experiments. On the one hand, simulations are conducted to elucidate that ensemble NHT outperform single NHT. On the other hand, the effects of bin sizes on accuracy of both NHT and KHT also accord with theoretical analysis. Last but not least, in the real-data experiments, comparisons between the ensemble KHT, equipped with adaptive histogram transforms, and other state-of-the-art large-scale regression estimators verify the effectiveness and accuracy of our algorithm.

stat.ML↗

A Deep-learning-based Joint Inference for Secure Spatial Modulation Receiver

As a green and secure wireless transmission way, secure spatial modulation (SM) is becoming a hot research area. Its basic idea is to exploit both the index of activated transmit antenna and amplitude phase modulation (APM) signal to carry messages, improve security, and save energy. In this paper, we reviewed its crucial techniques: transmit antenna selection (TAS), artificial noise (AN) projection, power allocation (PA), and joint detection at desired receiver. To achieve the optimal performance of maximum likelihood (ML) detector, a deep-neural-network (DNN) joint detector is proposed to jointly infer the index of transmit antenna and signal constellation point with a lower-complexity. Here, each layer of DNN is redesigned to optimize the joint inference performance of two distinct types of information: transmit antenna index and signal constellation point. Simulation results show that the proposed DNN method performs 3dB better than the conventional DNN structure and is close to ML detection in the low and medium signal-to-noise ratio regions in terms of the bit error rate (BER) performance, but its complexity is far lower-complexity compared to ML. Finally, three key techniques TAS, PA, and AN projection at transmitter can be combined to make SM a true secure modulation.

eess.SP↗

Towards fully automated post-event data collection and analysis: pre-event and post-event information fusion

In post-event reconnaissance missions, engineers and researchers collect perishable information about damaged buildings in the affected geographical region to learn from the consequences of the event. A typical post-event reconnaissance mission is conducted by first doing a preliminary survey, followed by a detailed survey. The preliminary survey is typically conducted by driving slowly along a pre-determined route, observing the damage, and noting where further detailed data should be collected. This involves several manual, time-consuming steps that can be accelerated by exploiting recent advances in computer vision and artificial intelligence. The objective of this work is to develop and validate an automated technique to support post-event reconnaissance teams in the rapid collection of reliable and sufficiently comprehensive data, for planning the detailed survey. The technique incorporates several methods designed to automate the process of categorizing buildings based on their key physical attributes, and rapidly assessing their post-event structural condition. It is divided into pre-event and post-event streams, each intending to first extract all possible information about the target buildings using both pre-event and post-event images. Algorithms based on convolutional neural network (CNNs) are implemented for scene (image) classification. A probabilistic approach is developed to fuse the results obtained from analyzing several images to yield a robust decision regarding the attributes and condition of a target building. We validate the technique using post-event images captured during reconnaissance missions that took place after hurricanes Harvey and Irma. The validation data were collected by a structural wind and coastal engineering reconnaissance team, the National Science Foundation (NSF) funded Structural Extreme Events Reconnaissance (StEER) Network.

cs.CV↗

Best-scored Random Forest Classification

We propose an algorithm named best-scored random forest for binary classification problems. The terminology "best-scored" means to select the one with the best empirical performance out of a certain number of purely random tree candidates as each single tree in the forest. In this way, the resulting forest can be more accurate than the original purely random forest. From the theoretical perspective, within the framework of regularized empirical risk minimization penalized on the number of splits, we establish almost optimal convergence rates for the proposed best-scored random trees under certain conditions which can be extended to the best-scored random forest. In addition, we present a counterexample to illustrate that in order to ensure the consistency of the forest, every dimension must have the chance to be split. In the numerical experiments, for the sake of efficiency, we employ an adaptive random splitting criterion. Comparative experiments with other state-of-art classification methods demonstrate the accuracy of our best-scored random forest.

stat.ML↗

Kyrix: Interactive Visual Data Exploration at Scale

Scalable interactive visual data exploration is crucial in many domains due to increasingly large datasets generated at rapid rates. Details-on-demand provides a useful interaction paradigm for exploring large datasets, where users start at an overview, find regions of interest, zoom in to see detailed views, zoom out and then repeat. This paradigm is the primary user interaction mode of widely-used systems such as Google Maps, Aperture Tiles and ForeCache. These earlier systems, however, are highly customized with hardcoded visual representations and optimizations. A more general framework is needed to facilitate the development of visual data exploration systems at scale. In this paper, we present Kyrix, an end-to-end system for developing scalable details-on-demand data exploration applications. Kyrix provides developers with a declarative model for easy specification of general visualizations. Behind the scenes, Kyrix utilizes a suite of performance optimization techniques to achieve a response time within 500ms for various user interactions. We also report results from a performance study which shows that a novel dynamic fetching scheme adopted by Kyrix outperforms tile-based fetching used in earlier systems.

cs.HC↗

Fast Deep Learning for Automatic Modulation Classification

In this work, we investigate the feasibility and effectiveness of employing deep learning algorithms for automatic recognition of the modulation type of received wireless communication signals from subsampled data. Recent work considered a GNU radio-based data set that mimics the imperfections in a real wireless channel and uses 10 different modulation types. A Convolutional Neural Network (CNN) architecture was then developed and shown to achieve performance that exceeds that of expert-based approaches. Here, we continue this line of work and investigate deep neural network architectures that deliver high classification accuracy. We identify three architectures - namely, a Convolutional Long Short-term Deep Neural Network (CLDNN), a Long Short-Term Memory neural network (LSTM), and a deep Residual Network (ResNet) - that lead to typical classification accuracy values around 90% at high SNR. We then study algorithms to reduce the training time by minimizing the size of the training data set, while incurring a minimal loss in classification accuracy. To this end, we demonstrate the performance of Principal Component Analysis in significantly reducing the training time, while maintaining good performance at low SNR. We also investigate subsampling techniques that further reduce the training time, and pave the way for online classification at high SNR. Finally, we identify representative SNR values for training each of the candidate architectures, and consequently, realize drastic reductions of the training time, with negligible loss in classification accuracy.

eess.SP↗

Evidence for quasi-one-dimensional charge density wave in CuTe by angle-resolved photoemission spectroscopy

We report the electronic structure of CuTe with a high charge density wave (CDW) transition temperature Tc = 335 K by angle-resolved photoemission spectroscopy (ARPES). An anisotropic charge density wave gap with a maximum value of 190 meV is observed in the quasi-one-dimensional band formed by Te px orbitals. The CDW gap can be filled by increasing temperature or electron doping through in situ potassium deposition. Combining the experimental results with calculated electron scattering susceptibility and phonon dispersion, we suggest that both Fermi surface nesting and electron-phonon coupling play important roles in the emergence of the CDW.

cond-mat.mtrl-sci↗

Covert Communication with A Full-Duplex Receiver Based on Channel Distribution Information

In this work, we consider a system of covert communication with the aid of a full-duplex (FD) receiver to enhance the performance in a more realistic scenario, i.e., only the channel distribution information (CDI) rather than channel state information (CSI) is known to a warden. Our work shows that transmitting random AN can improve the covert communication with the infinite blocklength. Specifically, we jointly design the optimal transmit power and AN power by minimizing the outage probability at Bob, and we find that the outage probability decreases and then increases as the maximum allowable AN power increases. Intuitively, once AN exceeds an optimal value, the performance will become worse because of the self-interference. The simulation results also show that the performance behaviors of CDI and CSI are different. When Willie only knows CDI, there is an optimal AN power that minimizes Bob's outage probability. However, when Willie knows CSI, the outage probability monotonically decreases with AN power.

eess.SP↗

High-performance Power Allocation Strategies for Secure Spatial Modulation

Optimal power allocation (PA) strategies can make a significant rate improvement in secure spatial modulation (SM). Due to the lack of secrecy rate (SR) closed-form expression in secure SM networks, it is hard to optimize the PA factor. In this paper, two PA strategies are proposed: gradient descent, and maximum product of signal-to-interference-plus-noise ratio (SINR) and artificial-noise-to-signal-plus-noise ratio (ANSNR)(Max-P-SINR-ANSNR). The former is an iterative method and the latter is a closed-form solution. Compared to the former, the latter is of low-complexity. Simulation results show that the proposed two PA methods can approximately achieve the same SR performance as exhaustive search method and perform far better than three fixed PA ones. With extremely low complexity, the SR performance of the proposed Max-P-SINR-ANSNR performs slightly better and worse than that of the proposed GD in the low to medium, and high signal-to-noise ratio regions, respectively.

eess.SP↗

Model Interpretation: A Unified Derivative-based Framework for Nonparametric Regression and Supervised Machine Learning

Interpreting a nonparametric regression model with many predictors is known to be a challenging problem. There has been renewed interest in this topic due to the extensive use of machine learning algorithms and the difficulty in understanding and explaining their input-output relationships. This paper develops a unified framework using a derivative-based approach for existing tools in the literature, including the partial-dependence plots, marginal plots and accumulated effects plots. It proposes a new interpretation technique called the accumulated total derivative effects plot and demonstrates how its components can be used to develop extensive insights in complex regression models with correlated predictors. The techniques are illustrated through simulation results.

stat.ML↗

Dual-label Deep LSTM Dereverberation For Speaker Verification

In this paper, we present a reverberation removal approach for speaker verification, utilizing dual-label deep neural networks (DNNs). The networks perform feature mapping between the spectral features of reverberant and clean speech. Long short term memory recurrent neural networks (LSTMs) are trained to map corrupted Mel filterbank (MFB) features to two sets of labels: i) the clean MFB features, and ii) either estimated pitch tracks or the fast Fourier transform (FFT) spectrogram of clean speech. The performance of reverberation removal is evaluated by equal error rates (EERs) of speaker verification experiments.

eess.AS↗

Deep Neural Network Architectures for Modulation Classification

In this work, we investigate the value of employing deep learning for the task of wireless signal modulation recognition. Recently in [1], a framework has been introduced by generating a dataset using GNU radio that mimics the imperfections in a real wireless channel, and uses 10 different modulation types. Further, a convolutional neural network (CNN) architecture was developed and shown to deliver performance that exceeds that of expert-based approaches. Here, we follow the framework of [1] and find deep neural network architectures that deliver higher accuracy than the state of the art. We tested the architecture of [1] and found it to achieve an accuracy of approximately 75% of correctly recognizing the modulation type. We first tune the CNN architecture of [1] and find a design with four convolutional layers and two dense layers that gives an accuracy of approximately 83.8% at high SNR. We then develop architectures based on the recently introduced ideas of Residual Networks (ResNet [2]) and Densely Connected Networks (DenseNet [3]) to achieve high SNR accuracies of approximately 83.5% and 86.6%, respectively. Finally, we introduce a Convolutional Long Short-term Deep Neural Network (CLDNN [4]) to achieve an accuracy of approximately 88.5% at high SNR.

cs.LG↗

Event-Triggered Consensus for Linear Continuous-time Multi-agent Systems Based on a Predictor

In this paper, the problem of event-triggered consensus for linear continuous-time multi-agent systems is investigated. A new event-triggered consensus protocol based on a predictor is proposed to achieve consensus without continuous communication among agents. In the proposed consensus protocol, each agent only needs to monitor its states to determine its event-triggered instants. When an event is triggered, the agent will update its consensus protocol and sent its state information to its neighbors. In addition, the agent will also update its consensus protocol and the predictor when it receives the state information from its neighbors. A necessary and sufficient condition that the consensus problem can be solved is derived. Moreover, it is proved that Zeno behavior does not exist. Finally, a numerical example is given to illustrate that the protocol proposed in this paper can make the multi-agent systems achieve consensus through much fewer event-triggered times.

eess.SY↗

A high performance Nb nano-SQUID with a three-dimensional structure

A superconducting quantum interference device (SQUID) miniaturized into nanoscale is promising in the inductive detection of a single electron spin. A nano-SQUID with a strong spin coupling coefficient, a low flux noise, and a wide working magnetic field range is highly desired in a single spin resonance measurement. Nano-SQUIDs with Dayem-bridge junctions excel in a high working field range and in the direct coupling from spins to the bridge. However, the common planar structure of nano-SQUIDs is known for problems such as a shallow flux modulation depth and a troublesome hysteresis in current-voltage curves. Here, we developed a fabrication process for creating three-dimensional (3-D) niobium (Nb) nano-SQUIDs with nano-bridge junctions that can be tuned independently. Characterization of the device shows up to 45.9 % modulation depth with a reversible current-voltage curve. Owning to the large modulation depth, the measured flux noise is as low as 0.34 μΦ$_0$/Hz$^{1/2}$. The working field range of the SQUID is greater than 0.5 T parallel to the SQUID plane. We believe that 3-D Nb nano-SQUIDs provide a promising step toward effective single-spin inductive detection.

cond-mat.mes-hall↗

Dimension reduction for Gaussian process emulation: an application to the influence of bathymetry on tsunami heights

High accuracy complex computer models, or simulators, require large resources in time and memory to produce realistic results. Statistical emulators are computationally cheap approximations of such simulators. They can be built to replace simulators for various purposes, such as the propagation of uncertainties from inputs to outputs or the calibration of some internal parameters against observations. However, when the input space is of high dimension, the construction of an emulator can become prohibitively expensive. In this paper, we introduce a joint framework merging emulation with dimension reduction in order to overcome this hurdle. The gradient-based kernel dimension reduction technique is chosen due to its ability to drastically decrease dimensionality with little loss in information. The Gaussian process emulation technique is combined with this dimension reduction approach. Our proposed approach provides an answer to the dimension reduction issue in emulation for a wide range of simulation problems that cannot be tackled using existing methods. The efficiency and accuracy of the proposed framework is demonstrated theoretically, and compared with other methods on an elliptic partial differential equation (PDE) problem. We finally present a realistic application to tsunami modeling. The uncertainties in the bathymetry (seafloor elevation) are modeled as high-dimensional realizations of a spatial process using a geostatistical approach. Our dimension-reduced emulation enables us to compute the impact of these uncertainties on resulting possible tsunami wave heights near-shore and on-shore. We observe a significant increase in the spread of uncertainties in the tsunami heights due to the contribution of the bathymetry uncertainties. These results highlight the need to include the effect of uncertainties in the bathymetry in tsunami early warnings and risk assessments.

stat.CO↗

Superconducting nanowire single photon detector at 532 nm and demonstration in satellite laser ranging

Superconducting nanowire single-photon detectors (SNSPDs) at a wavelength of 532 nm were designed and fabricated aiming to satellite laser ranging (SLR) applications. The NbN SNSPDs were fabricated on one-dimensional photonic crystals with a sensitive-area diameter of 42 um. The devices were coupled with multimode fiber (phi=50um) and exhibited a maximum system detection efficiency of 75% at an extremely low dark count rate of <0.1 Hz. An SLR experiment using an SNSPD at a wavelength of 532 nm was successfully demonstrated. The results showed a depth ranging with a precision of ~8.0 mm for the target satellite LARES, which is ~3,000 km away from the ground ranging station at the Sheshan Observatory.

cond-mat.supr-con↗

Large-sensitive-area superconducting nanowire single-photon detector at 850 nm with high detection efficiency

Satellite-ground quantum communication requires single-photon detectors of 850-nm wavelength with both high detection efficiency and large sensitive area. We developed superconducting nanowire single-photon detectors (SNSPDs) on one-dimensional photonic crystals, which acted as optical cavities to enhance the optical absorption, with a sensitive-area diameter of 50 um. The fabricated multimode fiber coupled NbN SNSPDs exhibited a maximum system detection efficiency (DE) of up to 82% and a DE of 78% at a dark count rate of 100 Hz at 850-nm wavelength as well as a system jitter of 105 ps.

physics.optics↗

Comparing CSI and PCA in Amalgamation with JPEG for Spectral Image Compression

Continuing our previous research on color image compression, we move towards spectral image compression. This enormous amount of data needs more space to store and more time to transmit. To manage this sheer amount of data, researchers have investigated different techniques so that image quality can be conserved and compressibility can be improved. The principle component analysis (PCA) can be employed to reduce the dimensions of spectral images to achieve high compressibility and performance. Due to processing complexity of PCA, a simple interpolation technique called cubic spline interpolation (CSI) was considered to reduce the dimensionality of spectral domain of spectral images. The CSI and PCA were employed one by one in the spectral domain and were amalgamated with the JPEG, which was employed in spatial domain. Three measures including compression rate (CR), processing time (Tp) and color difference CIEDE2000 were used for performance analysis. Test results showed that for a fixed value of compression rate, CSI based algorithm performed poor in terms of dE00, in comparison with PCA, but is still reliable because of small color difference. On the other hand it has lower complexity and is computationally much better as compared to PCA based algorithm, especially for spectral images with large size.

cs.MM↗