arXiv subjects

Xiaobo Qu

Publications and source records attributed to Xiaobo Qu.

At least 19 recordsLinked to original sources

arXiv2026

PileBelief: Persistent Physical State for Interaction-Driven World Modeling

World models allow robots to anticipate action consequences before execution. This capability is especially valuable in excavation, where each scoop reshapes the terrain and affects subsequent actions. Local observations, however, cannot fully reveal the underlying support and material conditions. We present PileBelief, an interaction-driven persistent world model for partially observed excavation that retains physical evidence beyond the visible surface. It combines an observation-conditioned physical prior with world-addressed deformation memory and physical-response memory. Action-aligned reads and gated residual corrections refine terrain-change and outcome predictions. With deployment weights fixed, completed interactions update measured belief, while hypothetical actions advance a separate imagined state. Compared with a current-observation-only baseline, PileBelief reduces five-step joint prediction error by 10.8% and offline action-selection regret by 65.5%. Experiments on Newton/MPM and real excavation datasets further demonstrate improved terrain-change and bucket-volume prediction. Our method enables multi-step prediction and candidate-action ranking from local observations, even when the underlying soil state is unknown. These results identify persistent physical belief as a useful representation for world models of environments that robots continually reshape.

cs.RO↗

arXiv2026

Risk-Controllable Multi-View Diffusion for Driving Scenario Generation

Generating safety-critical driving scenarios is crucial for evaluating and improving autonomous driving systems, but long-tail risky situations are rarely observed in real-world data and difficult to specify through manual scenario design. Existing generative approaches typically treat risk as an after-the-fact label and struggle to maintain geometric consistency in multi-view driving scenes. We present RiskMV-DPO, a general and systematic pipeline for physically-informed, risk-controllable multi-view scenario generation. By integrating target risk levels with physically-grounded risk modeling, we synthesize diverse and high-stakes dynamic trajectories that serve as explicit geometric anchors for a diffusion-based video generator. To ensure spatial-temporal coherence and geometric fidelity, we introduce a geometry-appearance alignment module and a region-aware direct preference optimization (RA-DPO) strategy with motion-aware masking to focus learning on localized dynamic regions. Experiments on the nuScenes dataset show that RiskMV-DPO can freely generate a wide spectrum of diverse scenarios while maintaining visual quality, improving 3D detection mAP from 18.17 to 30.50 and reducing FID to 15.70. Our work shifts the role of world models from passive environment prediction to proactive, risk-controllable synthesis, providing a scalable toolchain for the development of embodied intelligence.

cs.CV↗

arXiv2026

Rethinking Foundation Model Collaboration: Enhancing Specialized Models through Proxy Task Reasoning

Foundation models are increasingly integrated into embodied intelligence systems, but directly assigning them structured prediction tasks requires precise geometric and numerical estimation, where specialized models often remain stronger. This capability mismatch raises a key question: should foundation models replace task-specific predictors, or should they collaborate through tasks better aligned with their strengths? We propose FAT, a foundation-model-augmented task-specific reasoning framework that treats collaboration as task decomposition rather than model replacement. FAT decomposes structured prediction into specialist prediction, information-space reconstruction, and foundation-model proxy reasoning. The specialist generates geometrically and physically valid hypotheses in the native output space, while the foundation model performs a bounded proxy task, such as selection or verification, over reconstructed multimodal candidates. We instantiate this principle as ProxySelect with a vision--language model. Across 2D object detection, 3D object detection, trajectory prediction, and semantic segmentation, ProxySelect consistently improves specialized baselines and substantially outperforms direct foundation-model regression at lower computational cost. These results suggest a general collaboration principle: specialized models preserve task-specific structure, while foundation models refine their hypotheses through contextual proxy reasoning.

cs.CV↗

arXiv2026

Unsupervised Unfolded rPCA (U2-rPCA): Deep Interpretable Clutter Filtering for Ultrasound Microvascular Imaging

High-sensitivity clutter filtering is a fundamental step in ultrasound microvascular imaging. Singular value decomposition (SVD) and robust principal component analysis (rPCA) are the main clutter filtering strategies. However, both strategies are limited in feature modeling and separation of tissue and blood flow for high-quality microvascular imaging. Recently, deep learning-based clutter filtering has shown potential in more thoroughly separating tissue and blood flow signals. However, the existing supervised filters face the lack of interpretability and the training ground truth. While the interpretability issue can be addressed by algorithm deep unfolding, the training ground truth remains unsolved. This paper proposes an unsupervised unfolded rPCA (U2-rPCA) method that preserves mathematical interpretability and is insusceptible to learning labels. Specifically, U2-rPCA is unfolded from an iteratively reweighted least squares (IRLS) rPCA baseline with intrinsic low-rank and sparse regularization. In addition, a sparse-enhancement unit is plugged into the network to strengthen its capability to capture the sparse micro-flow signals. U2-rPCA is like an adaptive filter that is trained with part of the image sequence and then used for the following frames. Experimental validations on a in-silico dataset and public in-vivo datasets demonstrated the outperformance of U2-rPCA when compared with the SVD filter, the rPCA baseline, and another deep learning-based filter. Particularly, the proposed method improved the contrast-to-noise ratio (CNR) of the power Doppler image by 1.91 dB to 8.48 dB compared to other methods. Furthermore, the effectiveness of the building modules of U2-rPCA was validated through ablation studies.

cs.CV↗

arXiv2026

Enabling Ultra-Fast Cardiovascular Imaging Across Heterogeneous Clinical Environments with A Generalist Foundation Model and Multimodal Database

Multimodal cardiovascular magnetic resonance (CMR) imaging provides comprehensive and non-invasive insights into cardiovascular disease (CVD) diagnosis and underlying mechanisms. Despite decades of advancements, its widespread clinical adoption remains constrained by prolonged scan times, inconsistent image quality, and heterogeneity across medical environments. This underscores the urgent need for a generalist reconstruction foundation model for ultra-fast CMR imaging, one formulated for physics-constrained inverse problems in the sensor (k-space) domain, capable of adapting across diverse imaging scenarios and serving as the essential substrate for all downstream analyses. To enable this goal, we curate MMCMR-427K, the largest and most comprehensive multimodal CMR k-space database to date, comprising 427,465 multi-coil k-space data paired with structured metadata across 13 international centers, 12 CMR modalities, 15 scanners spanning four field strengths, and 17 CVD categories in populations across three continents. Building on this unprecedented resource, we introduce CardioMM, a generalist reconstruction foundation model capable of dynamically adapting to heterogeneous fast CMR imaging scenarios. CardioMM unifies semantic contextual understanding with physics-informed data consistency to deliver robust reconstructions across varied scanners, protocols, and patient presentations. Comprehensive evaluations demonstrate that CardioMM achieves state-of-the-art performance across internal centers and exhibits strong zero-shot generalization to unseen external settings. Importantly, CardioMM supports acceleration up to 24x, providing the first evidence that such extreme acquisition speed can preserve key cardiac phenotypes, quantitative myocardial biomarkers, and diagnostic image quality without compromising clinical integrity.

eess.IV↗

arXiv2026

Synthetic Data in MR Spectroscopy: Current Practices, Applications, and Considerations

The use of synthetic data has emerged as an essential tool in Magnetic Resonance Spectroscopy (MRS) research and applications, providing advantages for optimization of acquisition, software validation, deep learning applications, and enhanced reproducibility. Importantly, synthetic data addresses challenges of limited training data availability, particularly for clinical populations, and offers controlled solutions for investigating uncertainties and unexplained variance with in vivo data. This work provides a review and evaluation of current practices in the use and generation of synthetic data within the MRS field. Conducted by the MRS Synthetic Data Working Group under the Code & Data Sharing Committee of the MRS Study Group of the International Society for Magnetic Resonance in Medicine (ISMRM), this manuscript encompasses existing literature, supplemented by collective experience and in-house methodologies.

physics.med-ph↗

arXiv2025

HUTFormer: Hierarchical U-Net Transformer for Long-Term Traffic Forecasting

Traffic forecasting, which aims to predict traffic conditions based on historical observations, has been an enduring research topic and is widely recognized as an essential component of intelligent transportation. Recent proposals on Spatial-Temporal Graph Neural Networks~(STGNNs) have made significant progress by combining sequential models with graph convolution networks. However, due to high complexity issues, STGNNs only focus on short-term traffic forecasting (e.g., 1-h ahead), while ignoring more practical long-term forecasting. In this paper, we make the first attempt to explore long-term traffic forecasting (e.g., 1-day ahead). To this end, we first reveal its unique challenges in exploiting multi-scale representations. Then, we propose a novel Hierarchical U-Net TransFormer~(HUTFormer) to address the issues of long-term traffic forecasting. HUTFormer consists of a hierarchical encoder and decoder to jointly generate and utilize multi-scale representations of traffic data. Specifically, for the encoder, we {\color{black}propose} window self-attention and segment merging to extract multi-scale representations from long-term traffic data. For the decoder, we design a cross-scale attention mechanism to effectively incorporate multi-scale representations. In addition, HUTFormer employs an efficient input embedding strategy to address the complexity issues. Extensive experiments on four traffic datasets show that the proposed HUTFormer significantly outperforms state-of-the-art traffic forecasting and long time series forecasting baselines.

cs.LG↗

arXiv2025

Error Bound Analysis of Physics-Informed Neural Networks-Driven T2 Quantification in Cardiac Magnetic Resonance Imaging

Physics-Informed Neural Networks (PINN) are emerging as a promising approach for quantitative parameter estimation of Magnetic Resonance Imaging (MRI). While existing deep learning methods can provide an accurate quantitative estimation of the T2 parameter, they still require large amounts of training data and lack theoretical support and a recognized gold standard. Thus, given the absence of PINN-based approaches for T2 estimation, we propose embedding the fundamental physics of MRI, the Bloch equation, in the loss of PINN, which is solely based on target scan data and does not require a pre-defined training database. Furthermore, by deriving rigorous upper bounds for both the T2 estimation error and the generalization error of the Bloch equation solution, we establish a theoretical foundation for evaluating the PINN's quantitative accuracy. Even without access to the ground truth or a gold standard, this theory enables us to estimate the error with respect to the real quantitative parameter T2. The accuracy of T2 mapping and the validity of the theoretical analysis are demonstrated on a numerical cardiac model and a water phantom, where our method exhibits excellent quantitative precision in the myocardial T2 range. Clinical applicability is confirmed in 94 acute myocardial infarction (AMI) patients, achieving low-error quantitative T2 estimation under the theoretical error bound, highlighting the robustness and potential of PINN.

physics.bio-ph↗

arXiv2025

Towards Modality- and Sampling-Universal Learning Strategies for Accelerating Cardiovascular Imaging: Summary of the CMRxRecon2024 Challenge

Cardiovascular health is vital to human well-being, and cardiac magnetic resonance (CMR) imaging is considered the {clinical reference standard} for diagnosing cardiovascular disease. However, its adoption is hindered by long scan times, complex contrasts, and inconsistent quality. While deep learning methods perform well on specific CMR imaging {sequences}, they often fail to generalize across modalities and sampling schemes. The lack of benchmarks for high-quality, fast CMR image reconstruction further limits technology comparison and adoption. The CMRxRecon2024 challenge, attracting over 200 teams from 18 countries, addressed these issues with two tasks: generalization to unseen {modalities} and robustness to diverse undersampling patterns. We introduced the largest public multi-{modality} CMR raw dataset, an open benchmarking platform, and shared code. Analysis of the best-performing solutions revealed that prompt-based adaptation and enhanced physics-driven consistency enabled strong cross-scenario performance. These findings establish principles for generalizable reconstruction models and advance clinically translatable AI in cardiovascular imaging.

eess.IV↗

arXiv2025

Robust High-Resolution Multi-Organ Diffusion MRI Using Synthetic-Data-Tuned Prompt Learning

Clinical adoption of multi-shot diffusion-weighted magnetic resonance imaging (multi-shot DWI) for body-wide tumor diagnostics is limited by severe motion-induced phase artifacts from respiration, peristalsis, and so on, compounded by multi-organ, multi-slice, multi-direction and multi-b-value complexities. Here, we introduce a reconstruction framework, LoSP-Prompt, that overcomes these challenges through physics-informed modeling and synthetic-data-driven prompt learning. We model inter-shot phase variations as a high-order Locally Smooth Phase (LoSP), integrated into a low-rank Hankel matrix reconstruction. Crucially, the algorithm's rank parameter is automatically set via prompt learning trained exclusively on synthetic abdominal DWI data emulating physiological motion. Validated across 10,000+ clinical images (43 subjects, 4 scanner models, 5 centers), LoSP-Prompt: (1) Achieved twice the spatial resolution of clinical single-shot DWI, enhancing liver lesion conspicuity; (2) Generalized to seven diverse anatomical regions (liver, kidney, sacroiliac, pelvis, knee, spinal cord, brain) with a single model; (3) Outperformed state-of-the-art methods in image quality, artifact suppression, and noise reduction (11 radiologists' evaluations on a 5-point scale, $p<0.05$), achieving 4-5 points (excellent) on kidney DWI, 4 points (good to excellent) on liver, sacroiliac and spinal cord DWI, and 3-4 points (good) on knee and tumor brain. The approach eliminates navigator signals and realistic data supervision, providing an interpretable, robust solution for high-resolution multi-organ multi-shot DWI. Its scanner-agnostic performance signifies transformative potential for precision oncology.

cs.CV↗

arXiv2025

Physics-informed Deep Diffusion MRI Reconstruction with Synthetic Data: Break Training Data Bottleneck in Artificial Intelligence

Diffusion magnetic resonance imaging (MRI) is the only imaging modality for non-invasive movement detection of in vivo water molecules, with significant clinical and research applications. Diffusion weighted imaging (DWI) MRI acquired by multi-shot techniques can achieve higher resolution, better signal-to-noise ratio, and lower geometric distortion than single-shot, but suffers from inter-shot motion-induced artifacts. These artifacts cannot be removed prospectively, leading to the absence of artifact-free training labels. Thus, the potential of deep learning in multi-shot DWI reconstruction remains largely untapped. To break the training data bottleneck, here, we propose a Physics-Informed Deep DWI reconstruction method (PIDD) to synthesize high-quality paired training data by leveraging the physical diffusion model (magnitude synthesis) and inter-shot motion-induced phase model (motion phase synthesis). The network is trained only once with 100,000 synthetic samples, achieving encouraging results on multiple realistic in vivo data reconstructions. Advantages over conventional methods include: (a) Better motion artifact suppression and reconstruction stability; (b) Outstanding generalization to multi-scenario reconstructions, including multi-resolution, multi-b-value, multi-under-sampling, multi-vendor, and multi-center; (c) Excellent clinical adaptability to patients with verifications by seven experienced doctors (p<0.001). In conclusion, PIDD presents a novel deep learning framework by exploiting the power of MRI physics, providing a cost-effective and explainable way to break the data bottleneck in deep learning medical imaging.

eess.IV↗

arXiv2025

A Unified Longitudinal Trajectory Dataset for Automated Vehicle

Automated Vehicles (AVs) promise significant advances in transportation. Critical to these improvements is understanding AVs' longitudinal behavior, relying heavily on real-world trajectory data. Existing open-source trajectory datasets of AV, however, often fall short in refinement, reliability, and completeness, hindering effective performance metrics analysis and model development. This study addresses these challenges by creating a Unified Longitudinal TRAjectory dataset for AVs (Ultra-AV) to analyze their microscopic longitudinal driving behaviors. This dataset compiles data from 13 distinct sources, encompassing various AV types, test sites, and experiment scenarios. We established a three-step data processing: 1. extraction of longitudinal trajectory data, 2. general data cleaning, and 3. data-specific cleaning to obtain the longitudinal trajectory data and car-following trajectory data. The validity of the processed data is affirmed through performance evaluations across safety, mobility, stability, and sustainability, along with an analysis of the relationships between variables in car-following models. Our work not only furnishes researchers with standardized data and metrics for longitudinal AV behavior studies but also sets guidelines for data collection and model development.

cs.RO↗

arXiv2025

Reproducibility Assessment of Magnetic Resonance Spectroscopy of Pregenual Anterior Cingulate Cortex across Sessions and Vendors via the Cloud Computing Platform CloudBrain-MRS

Given the need to elucidate the mechanisms underlying illnesses and their treatment, as well as the lack of harmonization of acquisition and post-processing protocols among different magnetic resonance system vendors, this work is to determine if metabolite concentrations obtained from different sessions, machine models and even different vendors of 3 T scanners can be highly reproducible and be pooled for diagnostic analysis, which is very valuable for the research of rare diseases. Participants underwent magnetic resonance imaging (MRI) scanning once on two separate days within one week (one session per day, each session including two proton magnetic resonance spectroscopy (1H-MRS) scans with no more than a 5-minute interval between scans (no off-bed activity)) on each machine. were analyzed for reliability of within- and between- sessions using the coefficient of variation (CV) and intraclass correlation coefficient (ICC), and for reproducibility of across the machines using correlation coefficient. As for within- and between- session, all CV values for a group of all the first or second scans of a session, or for a session were almost below 20%, and most of the ICCs for metabolites range from moderate (0.4-0.59) to excellent (0.75-1), indicating high data reliability. When it comes to the reproducibility across the three scanners, all Pearson correlation coefficients across the three machines approached 1 with most around 0.9, and majority demonstrated statistical significance (P<0.01). Additionally, the intra-vendor reproducibility was greater than the inter-vendor ones.

stat.ML↗

arXiv2025

An artificially intelligent magnetic resonance spectroscopy quantification method: Comparison between QNet and LCModel on the cloud computing platform CloudBrain-MRS

Objctives: This work aimed to statistically compare the metabolite quantification of human brain magnetic resonance spectroscopy (MRS) between the deep learning method QNet and the classical method LCModel through an easy-to-use intelligent cloud computing platform CloudBrain-MRS. Materials and Methods: In this retrospective study, two 3 T MRI scanners Philips Ingenia and Achieva collected 61 and 46 in vivo 1H magnetic resonance (MR) spectra of healthy participants, respectively, from the brain region of pregenual anterior cingulate cortex from September to October 2021. The analyses of Bland-Altman, Pearson correlation and reasonability were performed to assess the degree of agreement, linear correlation and reasonability between the two quantification methods. Results: Fifteen healthy volunteers (12 females and 3 males, age range: 21-35 years, mean age/standard deviation = 27.4/3.9 years) were recruited. The analyses of Bland-Altman, Pearson correlation and reasonability showed high to good consistency and very strong to moderate correlation between the two methods for quantification of total N-acetylaspartate (tNAA), total choline (tCho), and inositol (Ins) (relative half interval of limits of agreement = 3.04%, 9.3%, and 18.5%, respectively; Pearson correlation coefficient r = 0.775, 0.927, and 0.469, respectively). In addition, quantification results of QNet are more likely to be closer to the previous reported average values than those of LCModel. Conclusion: There were high or good degrees of consistency between the quantification results of QNet and LCModel for tNAA, tCho, and Ins, and QNet generally has more reasonable quantification than LCModel.

physics.med-ph↗

arXiv2025

CMRxRecon2024: A Multi-Modality, Multi-View K-Space Dataset Boosting Universal Machine Learning for Accelerated Cardiac MRI

Cardiac magnetic resonance imaging (MRI) has emerged as a clinically gold-standard technique for diagnosing cardiac diseases, thanks to its ability to provide diverse information with multiple modalities and anatomical views. Accelerated cardiac MRI is highly expected to achieve time-efficient and patient-friendly imaging, and then advanced image reconstruction approaches are required to recover high-quality, clinically interpretable images from undersampled measurements. However, the lack of publicly available cardiac MRI k-space dataset in terms of both quantity and diversity has severely hindered substantial technological progress, particularly for data-driven artificial intelligence. Here, we provide a standardized, diverse, and high-quality CMRxRecon2024 dataset to facilitate the technical development, fair evaluation, and clinical transfer of cardiac MRI reconstruction approaches, towards promoting the universal frameworks that enable fast and robust reconstructions across different cardiac MRI protocols in clinical practice. To the best of our knowledge, the CMRxRecon2024 dataset is the largest and most protocal-diverse publicly available cardiac k-space dataset. It is acquired from 330 healthy volunteers, covering commonly used modalities, anatomical views, and acquisition trajectories in clinical cardiac MRI workflows. Besides, an open platform with tutorials, benchmarks, and data processing tools is provided to facilitate data usage, advanced method development, and fair performance evaluation.

eess.IV↗

arXiv2024

Deep Separable Spatiotemporal Learning for Fast Dynamic Cardiac MRI

Dynamic magnetic resonance imaging (MRI) plays an indispensable role in cardiac diagnosis. To enable fast imaging, the k-space data can be undersampled but the image reconstruction poses a great challenge of high-dimensional processing. This challenge necessitates extensive training data in deep learning reconstruction methods. In this work, we propose a novel and efficient approach, leveraging a dimension-reduced separable learning scheme that can perform exceptionally well even with highly limited training data. We design this new approach by incorporating spatiotemporal priors into the development of a Deep Separable Spatiotemporal Learning network (DeepSSL), which unrolls an iteration process of a 2D spatiotemporal reconstruction model with both temporal low-rankness and spatial sparsity. Intermediate outputs can also be visualized to provide insights into the network behavior and enhance interpretability. Extensive results on cardiac cine datasets demonstrate that the proposed DeepSSL surpasses state-of-the-art methods both visually and quantitatively, while reducing the demand for training cases by up to 75%. Additionally, its preliminary adaptability to unseen cardiac patients has been verified through a blind reader study conducted by experienced radiologists and cardiologists. Furthermore, DeepSSL enhances the accuracy of the downstream task of cardiac segmentation and exhibits robustness in prospectively undersampled real-time cardiac MRI.

eess.IV↗

arXiv2024

SLO-Aware Task Offloading within Collaborative Vehicle Platoons

In the context of autonomous vehicles (AVs), offloading is essential for guaranteeing the execution of perception tasks, e.g., mobile mapping or object detection. While existing work focused extensively on minimizing inter-vehicle networking latency through offloading, other objectives become relevant in the case of vehicle platoons, e.g., energy efficiency or data quality for heavy-duty or public transport. Therefore, we aim to enforce these Service Level Objectives (SLOs) through intelligent task offloading within AV platoons. We present a collaborative framework for handling and offloading services in a purely Vehicle-to-Vehicle approach (V2V) based on Bayesian Networks (BNs). Each service aggregates local observations into a platoon-wide understanding of how to ensure SLOs for heterogeneous vehicle types. With the resulting models, services can proactively decide to offload if this promises to improve global SLO fulfillment. We evaluate the approach in a real-case setting, where vehicles in a platoon continuously (i.e., every 500 ms) interpret the SLOs of three actual perception services. Our probabilistic, predictive method shows promising results in handling large AV platoons; within seconds, it detects and resolves SLO violations through offloading.

cs.DC↗

arXiv2024

CloudBrain-ReconAI: An Online Platform for MRI Reconstruction and Image Quality Evaluation

Efficient collaboration between engineers and radiologists is important for image reconstruction algorithm development and image quality evaluation in magnetic resonance imaging (MRI). Here, we develop CloudBrain-ReconAI, an online cloud computing platform, for algorithm deployment, fast and blind reader study. This platform supports online image reconstruction using state-of-the-art artificial intelligence and compressed sensing algorithms with applications to fast imaging and high-resolution diffusion imaging. Through visiting the website, radiologists can easily score and mark the images. Then, automatic statistical analysis will be provided. CloudBrain-ReconAI is now open accessed at https://csrc.xmu.edu.cn/CloudBrain.html and will be continually improved to serve the MRI research community.

eess.IV↗