arXiv subjects

Xiao Liang

Publications and source records attributed to Xiao Liang.

At least 181 records · Page 10Linked to original sources

arXiv2023

Post-Quantum Simulatable Extraction with Minimal Assumptions: Black-Box and Constant-Round

From the minimal assumption of post-quantum semi-honest oblivious transfers, we build the first $ε$-simulatable two-party computation (2PC) against quantum polynomial-time (QPT) adversaries that is both constant-round and black-box (for both the construction and security reduction). A recent work by Chia, Chung, Liu, and Yamakawa (FOCS'21) shows that post-quantum 2PC with standard simulation-based security is impossible in constant rounds, unless either $\mathbf{NP} \subseteq \mathbf{BQP}$ or relying on non-black-box simulation. The $ε$-simulatability we target is a relaxation of the standard simulation-based security that allows for an arbitrarily small noticeable simulation error $ε$. Moreover, when quantum communication is allowed, we can further weaken the assumption to post-quantum secure one-way functions (PQ-OWFs), while maintaining the constant-round and black-box property. Our techniques also yield the following set of constant-round and black-box two-party protocols secure against QPT adversaries, only assuming black-box access to PQ-OWFs: - extractable commitments for which the extractor is also an $ε$-simulator; - $ε$-zero-knowledge commit-and-prove whose commit stage is extractable with $ε$-simulation; - $ε$-simulatable coin-flipping; - $ε$-zero-knowledge arguments of knowledge for $\mathbf{NP}$ for which the knowledge extractor is also an $ε$-simulator; - $ε$-zero-knowledge arguments for $\mathbf{QMA}$. At the heart of the above results is a black-box extraction lemma showing how to efficiently extract secrets from QPT adversaries while disturbing their quantum state in a controllable manner, i.e., achieving $ε$-simulatability of the post-extraction state of the adversary.

cs.CR↗

arXiv2023

A New Approach to Post-Quantum Non-Malleability

We provide the first $\mathit{constant}$-$\mathit{round}$ construction of post-quantum non-malleable commitments under the minimal assumption that $\mathit{post}$-$\mathit{quantum}$ $\mathit{one}$-$\mathit{way}$ $\mathit{functions}$ exist. We achieve the standard notion of non-malleability with respect to commitments. Prior constructions required $Ω(\log^*λ)$ rounds under the same assumption. We achieve our results through a new technique for constant-round non-malleable commitments which is easier to use in the post-quantum setting. The technique also yields an almost elementary proof of security for constant-round non-malleable commitments in the classical setting, which may be of independent interest. When combined with existing work, our results yield the first constant-round quantum-secure multiparty computation for both classical and quantum functionalities $\mathit{in}$ $\mathit{the}$ $\mathit{plain}$ $\mathit{model}$, under the $\mathit{polynomial}$ hardness of quantum fully-homomorphic encryption and quantum learning with errors.

quant-ph↗

arXiv2023

Zero-shot Medical Image Translation via Frequency-Guided Diffusion Models

Recently, the diffusion model has emerged as a superior generative model that can produce high quality and realistic images. However, for medical image translation, the existing diffusion models are deficient in accurately retaining structural information since the structure details of source domain images are lost during the forward diffusion process and cannot be fully recovered through learned reverse diffusion, while the integrity of anatomical structures is extremely important in medical images. For instance, errors in image translation may distort, shift, or even remove structures and tumors, leading to incorrect diagnosis and inadequate treatments. Training and conditioning diffusion models using paired source and target images with matching anatomy can help. However, such paired data are very difficult and costly to obtain, and may also reduce the robustness of the developed model to out-of-distribution testing data. We propose a frequency-guided diffusion model (FGDM) that employs frequency-domain filters to guide the diffusion model for structure-preserving image translation. Based on its design, FGDM allows zero-shot learning, as it can be trained solely on the data from the target domain, and used directly for source-to-target domain translation without any exposure to the source-domain data during training. We evaluated it on three cone-beam CT (CBCT)-to-CT translation tasks for different anatomical sites, and a cross-institutional MR imaging translation task. FGDM outperformed the state-of-the-art methods (GAN-based, VAE-based, and diffusion-based) in metrics of Frechet Inception Distance (FID), Peak Signal-to-Noise Ratio (PSNR), and Structural Similarity Index Measure (SSIM), showing its significant advantages in zero-shot medical image translation.

eess.IV↗

arXiv2023

A Review of Prospects and Opportunities in Disassembly with Human-Robot Collaboration

Product disassembly plays a crucial role in the recycling, remanufacturing, and reuse of end-of-use (EoU) products. However, the current manual disassembly process is inefficient due to the complexity and variation of EoU products. While fully automating disassembly is not economically viable given the intricate nature of the task, there is potential in using human-robot collaboration (HRC) to enhance disassembly operations. HRC combines the flexibility and problem-solving abilities of humans with the precise repetition and handling of unsafe tasks by robots. Nevertheless, numerous challenges persist in technology, human workers, and remanufacturing work, that require comprehensive multidisciplinary research to bridge critical gaps. These challenges have motivated the authors to provide a detailed discussion on the opportunities and obstacles associated with introducing HRC to disassembly. In this regard, the authors have conducted a thorough review of the recent progress in HRC disassembly and present the insights gained from this analysis from three distinct perspectives: technology, workers, and work.

cs.RO↗

arXiv2023

Query-dominant User Interest Network for Large-Scale Search Ranking

Historical behaviors have shown great effect and potential in various prediction tasks, including recommendation and information retrieval. The overall historical behaviors are various but noisy while search behaviors are always sparse. Most existing approaches in personalized search ranking adopt the sparse search behaviors to learn representation with bottleneck, which do not sufficiently exploit the crucial long-term interest. In fact, there is no doubt that user long-term interest is various but noisy for instant search, and how to exploit it well still remains an open problem. To tackle this problem, in this work, we propose a novel model named Query-dominant user Interest Network (QIN), including two cascade units to filter the raw user behaviors and reweigh the behavior subsequences. Specifically, we propose a relevance search unit (RSU), which aims to search a subsequence relevant to the query first and then search the sub-subsequences relevant to the target item. These items are then fed into an attention unit called Fused Attention Unit (FAU). It should be able to calculate attention scores from the ID field and attribute field separately, and then adaptively fuse the item embedding and content embedding based on the user engagement of past period. Extensive experiments and ablation studies on real-world datasets demonstrate the superiority of our model over state-of-the-art methods. The QIN now has been successfully deployed on Kuaishou search, an online video search platform, and obtained 7.6% improvement on CTR.

cs.IR↗

arXiv2023

Dual-resonance nanostructures for colour down-conversion of colloidal quantum emitters

Linear colour conversion is a process where an emitter absorbs a photon and then emits another photon with either higher or lower energy, corresponding to up- or down conversion, respectively. In this regard, the presence of a volumetric cavity plays a crucial role in enhancing absorption and photoluminescence (PL), as it allows for large volumes of interaction between the exciting photons and the emissive materials, maximising the colour conversion efficiency. Here, we present a dual resonance nanostructure made of a titanium dioxide (TiO2) subwavelength grating to enhance the colour down-conversion efficiency of green light at ~530 nm emitted by gradient alloyed CdxZn1-xSeyS1-y colloidal quantum dots (QDs) when excited with a blue light at ~460 nm. A large mode volume can be created within the QD layer by the hybridisation of the grating resonances and waveguide modes. This allows increasing mode overlap between the resonances and the QDs, resulting in large absorption and tailored emission enhancements. Particularly, we achieved polarized light emission with maximum photoluminescence enhancement of ~140 times at a specific angular direction, and a total enhancement of ~34 times within 0.55 numerical aperture (NA) of the collecting objective. The enhancement encompasses absorption enhancement, Purcell enhancement and directionality enhancement (i.e., outcoupling). We achieved total absorption of 35% for green QDs with a remarkably thin colour conversion layer of ~ 400 nm (inclusive of the TiO2 layer). This work provides a guideline for designing large-volume cavities for practical application in absorption/fluorescence enhancement, such as down colour conversion in microLED displays, detectors or photovoltaics.

physics.optics↗

arXiv2023

Achieving Autonomous Cloth Manipulation with Optimal Control via Differentiable Physics-Aware Regularization and Safety Constraints

Cloth manipulation is a category of deformable object manipulation of great interest to the robotics community, from applications of automated laundry-folding and home organizing and cleaning to textiles and flexible manufacturing. Despite the desire for automated cloth manipulation, the thin-shell dynamics and under-actuation nature of cloth present significant challenges for robots to effectively interact with them. Many recent works omit explicit modeling in favor of learning-based methods that may yield control policies directly. However, these methods require large training sets that must be collected and curated. In this regard, we create a framework for differentiable modeling of cloth dynamics leveraging an Extended Position-based Dynamics (XPBD) algorithm. Together with the desired control objective, physics-aware regularization terms are designed for better results, including trajectory smoothness and elastic potential energy. In addition, safety constraints, such as avoiding obstacles, can be specified using signed distance functions (SDFs). We formulate the cloth manipulation task with safety constraints as a constrained optimization problem, which can be effectively solved by mainstream gradient-based optimizers thanks to the end-to-end differentiability of our framework. Finally, we assess the proposed framework for manipulation tasks with various safety thresholds and demonstrate the feasibility of result trajectories on a surgical robot. The effects of the regularization terms are analyzed in an additional ablation study.

cs.RO↗

arXiv2023

High Performance GPU Accelerated MuST Software

The MuST package is a computational software designed for ab initio electronic structure calculations for solids. The Locally Self-consistent Multiple Scattering (LSMS) method implemented in MuST allows to perform the electronic structure calculation for systems with a large number of atoms per unit cell. For the LSMS method with muffin-tin potential approximation, the major computational challenge is the matrix inverse for the scattering matrix calculation, which could take more than 90\% of the computing time. However, the matrix inverse can be significantly accelerated by modern graphical-processing-units (GPUs). In this paper, we discuss our approach to the code acceleration by offloading the matrix inverse tasks to the GPUs through a Fortran-C interface from the Fortran code to the CUDA code. We report our performance results showing significant speedup ratio achieved to the calculations of NiAu alloy, a candidate for thermoelectric materials.

physics.comp-ph↗

arXiv2023

Thermodynamics and evaporation of perfect fluid dark matter black hole in phantom background

We present a novel interpretation of the thermodynamics of perfect fluid dark matter (PFDM) black hole based on Misner-Sharp energy, and then investigate its evaporation behavior. We find that the ratio between dark sector initial density and black hole horizon radius significantly influences black hole evaporation behaviors. We demonstrate that the presence of the dark sector can significantly extend the lifetime of a black hole which is similar to the Reissner-Nordstrom case. Our work reformulates the thermodynamics of PFDM black holes and points out the existence of long-lived black holes in the presence of the dark sector.

gr-qc↗

arXiv2023

High-Resolution Vision Transformers for Pixel-Level Identification of Structural Components and Damage

Visual inspection is predominantly used to evaluate the state of civil structures, but recent developments in unmanned aerial vehicles (UAVs) and artificial intelligence have increased the speed, safety, and reliability of the inspection process. In this study, we develop a semantic segmentation network based on vision transformers and Laplacian pyramids scaling networks for efficiently parsing high-resolution visual inspection images. The massive amounts of collected high-resolution images during inspections can slow down the investigation efforts. And while there have been extensive studies dedicated to the use of deep learning models for damage segmentation, processing high-resolution visual data can pose major computational difficulties. Traditionally, images are either uniformly downsampled or partitioned to cope with computational demands. However, the input is at risk of losing local fine details, such as thin cracks, or global contextual information. Inspired by super-resolution architectures, our vision transformer model learns to resize high-resolution images and masks to retain both the valuable local features and the global semantics without sacrificing computational efficiency. The proposed framework has been evaluated through comprehensive experiments on a dataset of bridge inspection report images using multiple metrics for pixel-wise materials detection.

cs.CV↗

arXiv2023

TransFusion: A Practical and Effective Transformer-based Diffusion Model for 3D Human Motion Prediction

Predicting human motion plays a crucial role in ensuring a safe and effective human-robot close collaboration in intelligent remanufacturing systems of the future. Existing works can be categorized into two groups: those focusing on accuracy, predicting a single future motion, and those generating diverse predictions based on observations. The former group fails to address the uncertainty and multi-modal nature of human motion, while the latter group often produces motion sequences that deviate too far from the ground truth or become unrealistic within historical contexts. To tackle these issues, we propose TransFusion, an innovative and practical diffusion-based model for 3D human motion prediction which can generate samples that are more likely to happen while maintaining a certain level of diversity. Our model leverages Transformer as the backbone with long skip connections between shallow and deep layers. Additionally, we employ the discrete cosine transform to model motion sequences in the frequency space, thereby improving performance. In contrast to prior diffusion-based models that utilize extra modules like cross-attention and adaptive layer normalization to condition the prediction on past observed motion, we treat all inputs, including conditions, as tokens to create a more lightweight model compared to existing approaches. Extensive experimental studies are conducted on benchmark datasets to validate the effectiveness of our human motion prediction model.

cs.RO↗

arXiv2023

DE-TGN: Uncertainty-Aware Human Motion Forecasting using Deep Ensembles

Ensuring the safety of human workers in a collaborative environment with robots is of utmost importance. Although accurate pose prediction models can help prevent collisions between human workers and robots, they are still susceptible to critical errors. In this study, we propose a novel approach called deep ensembles of temporal graph neural networks (DE-TGN) that not only accurately forecast human motion but also provide a measure of prediction uncertainty. By leveraging deep ensembles and employing stochastic Monte-Carlo dropout sampling, we construct a volumetric field representing a range of potential future human poses based on covariance ellipsoids. To validate our framework, we conducted experiments using three motion capture datasets including Human3.6M, and two human-robot interaction scenarios, achieving state-of-the-art prediction error. Moreover, we discovered that deep ensembles not only enable us to quantify uncertainty but also improve the accuracy of our predictions.

cs.RO↗

arXiv2023

Near-Unity Emitting, Widely Tailorable and Stable Exciton Concentrators Built from Doubly Gradient 2D Semiconductor Nanoplatelets

The strength of electrostatic interactions (EI) between electrons and holes within semiconductor nanocrystals profoundly impact the performance of their optoelectronic systems, and different optoelectronic devices demand distinct EI strength of the active medium. However, achieving a broad range, fine-tuning of the EI strength for specific optoelectronic applications is a daunting challenge, especially in quasi 2-dimensional core-shell semiconductor nanoplatelets (NPLs), as the epitaxial growth of the inorganic shell along the direction of the thickness that solely contributes to the quantum confined effect significantly undermines the strength of the EI. Herein we propose and demonstrate a novel doubly-gradient (DG) core-shell architecture of semiconductor NPLs for on-demand tailoring of the EI strength by controlling the localized exciton concentration via in-plane architectural modulation, demonstrated by a wide tuning of radiative recombination rate and exciton binding energy. Moreover, these exciton-concentration-engineered DG NPLs also exhibit a near-unity quantum yield, remarkable thermal and photo stability, as well as considerably suppressed self-absorption. As proof-of-concept demonstrations, highly efficient color converters and high-performance light-emitting diodes (external quantum efficiency: 16.9%, maximum luminance: 43,000 cd/m2) have been achieved based on the DG NPLs. This work thus opens up new avenues for developing high-performance colloidal optoelectronic device applications.

physics.optics↗

arXiv2023

ORRN: An ODE-based Recursive Registration Network for Deformable Respiratory Motion Estimation with Lung 4DCT Images

Deformable Image Registration (DIR) plays a significant role in quantifying deformation in medical data. Recent Deep Learning methods have shown promising accuracy and speedup for registering a pair of medical images. However, in 4D (3D + time) medical data, organ motion, such as respiratory motion and heart beating, can not be effectively modeled by pair-wise methods as they were optimized for image pairs but did not consider the organ motion patterns necessary when considering 4D data. This paper presents ORRN, an Ordinary Differential Equations (ODE)-based recursive image registration network. Our network learns to estimate time-varying voxel velocities for an ODE that models deformation in 4D image data. It adopts a recursive registration strategy to progressively estimate a deformation field through ODE integration of voxel velocities. We evaluate the proposed method on two publicly available lung 4DCT datasets, DIRLab and CREATIS, for two tasks: 1) registering all images to the extreme inhale image for 3D+t deformation tracking and 2) registering extreme exhale to inhale phase images. Our method outperforms other learning-based methods in both tasks, producing the smallest Target Registration Error of 1.24mm and 1.26mm, respectively. Additionally, it produces less than 0.001\% unrealistic image folding, and the computation speed is less than 1 second for each CT volume. ORRN demonstrates promising registration accuracy, deformation plausibility, and computation efficiency on group-wise and pair-wise registration tasks. It has significant implications in enabling fast and accurate respiratory motion estimation for treatment planning in radiation therapy or robot motion planning in thoracic needle insertion.

eess.IV↗

arXiv2023

Continuity in law for solutions of SPDEs with space-time homogeneous Gaussian noise

In this article, we study the continuity in law of the solutions of two linear multiplicative SPDEs (the parabolic Anderson model and the hyperbolic Anderson model) with respect to the spatial parameter of the noise. The solution is interpreted in the Skorohod sense, using Malliavin calculus. We consider two cases: (i) the regular noise, whose spatial covariance is given by the Riesz kernel of order $α\in (0,d)$, in spatial dimension $d\geq 1$; (ii) the rough noise, which is fractional in space with Hurst index $H<1/2$, in spatial dimension $d=1$. We assume that the noise is colored in time. The similar problem for the white noise in time was considered in Bezdek (2016) and Giordano, Jolis and Quer-Sardanyons (2020).

math.PR↗

arXiv2023

LayoutDiffuse: Adapting Foundational Diffusion Models for Layout-to-Image Generation

Layout-to-image generation refers to the task of synthesizing photo-realistic images based on semantic layouts. In this paper, we propose LayoutDiffuse that adapts a foundational diffusion model pretrained on large-scale image or text-image datasets for layout-to-image generation. By adopting a novel neural adaptor based on layout attention and task-aware prompts, our method trains efficiently, generates images with both high perceptual quality and layout alignment, and needs less data. Experiments on three datasets show that our method significantly outperforms other 10 generative models based on GANs, VQ-VAE, and diffusion models.

cs.CV↗

arXiv2023

New starting point registration method for tagged MRI tongue motion estimation

Accurate tongue motion estimation is essential for tongue function evaluation. The harmonic phase processing (HARP) method and the phase vector incompressible registration algorithm (PVIRA) based on HARP can generate motion estimates from tagged MRI images, but they suffer from tag jumping due to large motions. This paper proposes a new registration method by combining the stationary velocity fields produced by PVIRA between successive time frames as a new initialization of the final registration stage to avoid tag jumping. The experiment results demonstrate the proposed method can avoid tag jumping and outperform the existing methods on tongue motion estimates.

eess.IV↗

arXiv2023

Deep Learning (DL)-based Automatic Segmentation of the Internal Pudendal Artery (IPA) for Reduction of Erectile Dysfunction in Definitive Radiotherapy of Localized Prostate Cancer

Background and purpose: Radiation-induced erectile dysfunction (RiED) is commonly seen in prostate cancer patients. Clinical trials have been developed in multiple institutions to investigate whether dose-sparing to the internal-pudendal-arteries (IPA) will improve retention of sexual potency. The IPA is usually not considered a conventional organ-at-risk (OAR) due to segmentation difficulty. In this work, we propose a deep learning (DL)-based auto-segmentation model for the IPA that utilizes CT and MRI or CT alone as the input image modality to accommodate variation in clinical practice. Materials and methods: 86 patients with CT and MRI images and noisy IPA labels were recruited in this study. We split the data into 42/14/30 for model training, testing, and a clinical observer study, respectively. There were three major innovations in this model: 1) we designed an architecture with squeeze-and-excite blocks and modality attention for effective feature extraction and production of accurate segmentation, 2) a novel loss function was used for training the model effectively with noisy labels, and 3) modality dropout strategy was used for making the model capable of segmentation in the absence of MRI. Results: The DSC, ASD, and HD95 values for the test dataset were 62.2%, 2.54mm, and 7mm, respectively. AI segmented contours were dosimetrically equivalent to the expert physician's contours. The observer study showed that expert physicians' scored AI contours (mean=3.7) higher than inexperienced physicians' contours (mean=3.1). When inexperienced physicians started with AI contours, the score improved to 3.7. Conclusion: The proposed model achieved good quality IPA contours to improve uniformity of segmentation and to facilitate introduction of standardized IPA segmentation into clinical trials and practice.

eess.IV↗