arXiv subjects

Xiang Gao

Publications and source records attributed to Xiang Gao.

At least 163 records · Page 9Linked to original sources

arXiv2024

Detection of the lowest mass ratio contact binary in the universe: TYC 3801-1529-1

This paper presents the first analysis of the contact binary TYC 3801-1529-1. We observed four sets of multiple bands complete light curves and one set of radial velocity curve of the primary component. Based on a simultaneous investigation of our observed and TESS light curves and the radial velocity curve, we found that TYC 3801-1529-1 is an extremely low-mass-ratio, medium contact binary with $q=0.0356$, with the contribution of the third light at a level of about 10\%. Its mass ratio is lower than V1187 Her, making TYC 3801-1529-1 the lowest mass-ratio contact binary ever found in the universe. The light curves observed in 2022 are asymmetric, which is aptly explained by a hot spot on the primary component. A 16-year eclipse timings analysis indicates a secular increase orbital period with a rate of dp/dt$=7.96(\pm0.35)\times10^{-7}$ d yr$^{-1}$. We studied the stability of this target and identified that not only the value of $J_{spin}/J_{orb}$, but also the mass ratio surpass the unstable boundary. Hence, TYC 3801-1529-1 presents a challenge to theoretical research and ought to be considered a progenitor of a contact binary merger.

astro-ph.SR↗

arXiv2024

Mitigating Hallucination in Fictional Character Role-Play

Role-playing has wide-ranging applications in customer support, embodied agents, and computational social science. The influence of parametric world knowledge of large language models (LLMs) often causes role-playing characters to act out of character and to hallucinate about things outside the scope of their knowledge. In this work, we focus on the evaluation and mitigation of hallucination in fictional character role-play. We introduce a dataset with over 2,000 characters and 72,000 interviews, including 18,000 adversarial questions. We propose RoleFact, a role-playing method that mitigates hallucination by modulating the influence of parametric knowledge using a pre-calibrated confidence threshold. Experiments show that the proposed method improves the factual precision of generated responses by 18% for adversarial questions with a 44% reduction in temporal hallucination for time-sensitive interviews. The code and the dataset are available at https://github.com/NafisSadeq/rolefact.git.

cs.CL↗

arXiv2024

Frictional Dissipation and Scaling Laws at van der Waals Interface: The Key Role of Elastic Pinning of Moiré at Edges and Corners

Van der Waals heterogeneous interfaces are promising candidates for the scaling up of structural superlubricity to meet practical applications. Several factors, however, have been identified that may eliminate superlubricity. Elasticity is one such intrinsic factor, where shear induced lattice reconstruction leads to local interfacial pinning, even at clean pristine contacts. Here, through detailed atomistic simulations, we reveal that incomplete moiré tile pinning at the corners and edges of finite sliders dominates friction from the nano- to the microscales. We further demonstrate that slider shape tailoring and twisting allow to control energy dissipation and its scaling with contact size, thus opening the way to achieve large-scale superlubricity.

cond-mat.mes-hall↗

arXiv2024

Chemifriction and Superlubricity: Friends or Foes?

The mechanisms underlying chemifriction, i.e. the contribution of interfacial bonding to friction in defected twisted graphene interfaces are revealed using fully atomistic machine-learning molecular dynamics simulations. This involves stochastic events of consecutive bond formation and rupture, that are spatially separated but not necessarily independent. A unique shear-induced interlayer atomic transfer healing mechanism is discovered that can be harnessed to design a run-in procedure to restore superlubric sliding. This mechanism should be manifested as negative differential friction coefficients that are expected to emerge under moderate normal loads. A physically motivated phenomenological model is developed to predict the effects of chemifriction in experimentally relevant sliding velocity regimes. This allows us to identify a distinct transition between logarithmic increase and logarithmic decrease of frictional stress with increasing sliding velocity. While demonstrated for homogeneous graphene interfaces, a similar mechanism is expected to occur in other homogeneous or heterogeneous defected two-dimensional material interfaces.

cond-mat.mes-hall↗

arXiv2024

Global Alignment Reference Strategy for Laser Interference Lithography Pattern Arrays

Large-area gratings play a crucial role in various engineering fields. However, traditional interference lithography is limited by the size of optical component apertures, making large-area fabrication a challenging task. Here, a method for fabricating laser interference lithography pattern arrays with a global alignment reference strategy is proposed. This approach enables alignment of each area of the laser interference lithography pattern arrays, including phase, period, and tilt angle. Two reference gratings are utilized: one is detached from the substrate, while the other remains fixed to it. To achieve global alignment, the exposure area is adjusted by alternating between moving the beam and the substrate. In our experiment, a 3 $\times$ 3 regions grating array was fabricated, and the $-1$st-order diffraction wavefront measured by the Fizeau interferometer exhibited good continuity. This technique enables effective and efficient alignment with high accuracy across any regions in an interference lithography pattern array on large substrates.

physics.optics↗

arXiv2024

QCD Predictions for Meson Electromagnetic Form Factors at High Momenta: Testing Factorization in Exclusive Processes

We report the first lattice QCD computation of pion and kaon electromagnetic form factors, $F_M(Q^2)$, at large momentum transfer up to 10 and 28 $\mathrm{GeV}^2$, respectively. Utilizing physical masses and two fine lattices, we achieve good agreement with JLab experimental results at $Q^2 \lesssim 4~\mathrm{GeV}^2$. For $Q^2 \gtrsim 4~\mathrm{GeV}^2$, our results provide $\textit{ab-initio}$ QCD benchmarks for the forthcoming experiments at JLab 12 GeV and future electron-ion colliders. We also test the QCD collinear factorization framework utilizing our high-$Q^2$ form factors at next-to-next-to-leading order in perturbation theory, which relates the form factors to the leading Fock-state meson distribution amplitudes. Comparisons with independent lattice QCD calculations using the same framework demonstrate, within estimated uncertainties, the universality of these nonperturbative quantities.

hep-lat↗

arXiv2024

DynaMO: Protecting Mobile DL Models through Coupling Obfuscated DL Operators

Deploying DL models on mobile Apps has become ever-more popular. However, existing studies show attackers can easily reverse-engineer mobile DL models in Apps to steal intellectual property or generate effective attacks. A recent approach, Model Obfuscation, has been proposed to defend against such reverse engineering by obfuscating DL model representations, such as weights and computational graphs, without affecting model performance. These existing model obfuscation methods use static methods to obfuscate the model representation, or they use half-dynamic methods but require users to restore the model information through additional input arguments. However, these static methods or half-dynamic methods cannot provide enough protection for on-device DL models. Attackers can use dynamic analysis to mine the sensitive information in the inference codes as the correct model information and intermediate results must be recovered at runtime for static and half-dynamic obfuscation methods. We assess the vulnerability of the existing obfuscation strategies using an instrumentation method and tool, DLModelExplorer, that dynamically extracts correct sensitive model information at runtime. Experiments show it achieves very high attack performance. To defend against such attacks based on dynamic instrumentation, we propose DynaMO, a Dynamic Model Obfuscation strategy similar to Homomorphic Encryption. The obfuscation and recovery process can be done through simple linear transformation for the weights of randomly coupled eligible operators, which is a fully dynamic obfuscation strategy. Experiments show that our proposed strategy can dramatically improve model security compared with the existing obfuscation strategies, with only negligible overheads for on-device models.

cs.SE↗

arXiv2024

LLM-based Unit Test Generation via Property Retrieval

Automated unit test generation has been widely studied, with Large Language Models (LLMs) recently showing significant potential. Moreover, in the context of unit test generation, these tools prioritize high code coverage, often at the expense of practical usability, correctness, and maintainability. In response, we propose Property-Based Retrieval Augmentation, a novel mechanism that extends LLM-based Retrieval-Augmented Generation (RAG) beyond basic vector, text similarity, and graph-based methods. Our approach considers task-specific context and introduces a tailored property retrieval mechanism. Specifically, in the unit test generation task, we account for the unique structure of unit tests by dividing the test generation process into Given, When, and Then phases. When generating tests for a focal method, we not only retrieve general context for the code under test but also consider task-specific context such as pre-existing tests of other methods, which can provide valuable insights for any of the Given, When, and Then phases. This forms property relationships between focal method and other methods, thereby expanding the scope of retrieval beyond traditional RAG. We implement this approach in a tool called APT, which sequentially performs preprocessing, property retrieval, and unit test generation, using an iterative strategy where newly generated tests guide the creation of subsequent ones. We evaluated APT on 12 open-source projects with 1515 methods, and the results demonstrate that APT consistently outperforms existing tools in terms of correctness, completeness, and maintainability of the generated tests. Moreover, we introduce a novel code-context-aware retrieval mechanism for LLMs beyond general context, offering valuable insights and potential applications for other code-related tasks.

cs.SE↗

arXiv2024

Emerging chirality and moiré dynamics in twisted layered material heterostructures

Moiré superstructures arising at twisted 2D interfaces have recently attracted the attention of the scientific community due to exotic quantum states and unique mechanical and tribological behaviors that they exhibit. Here, we predict the emergence of chiral distortions in twisted layered interfaces of finite dimensions. This phenomenon originates in intricate interplay between interfacial interactions and contact boundary constraints. A metric termed the fractional chiral area, is introduced to quantify the overall chirality of the moiré superstructure and to characterize its spatial distribution. Despite the equilibrium nature of the discovered energetic and structural chirality effects they are shown to be manifested in the twisting dynamics of layered interfaces, which demonstrates a continuous transition from stick-slip to smooth rotation with no external trigger.

cond-mat.mes-hall↗

arXiv2024

Photometric and Spectroscopic analysis of eight totally eclipsing contact binaries with small mass ratios

This paper selected eight totally eclipsing contact binaries for photometric and spectroscopic studies, spectral data were analyzed by ULySS, and photometric data were analyzed using PHOEBE through MCMC sampling. We used two methods to calculate the initial values for running MCMC: one method is a new approach proposed by ourselves to model light curves without spots, while the other method is the genetic algorithm (GA) which can determine physical parameters with spot. Due to the results, these eight targets are all small mass ratio contact binary stars with a mass ratio below 0.25. There are four systems exhibiting O'Connell effect. By adding a dark spot on the primary component, the ideal fitting can be obtained. Meanwhile, it was found that two systems are shallow contact binaries, while the remaining six are moderate contact binaries. An O-C analysis of the eight eclipsing binary stars revealed that seven of them exhibit long-term changes. Four of them display a long-term decreasing trend, while the other three show a long-term increasing trend, and two targets exhibit periodic variations. The decrease in period may be caused by the transfer of matter from the more massive component to the less massive component, while the increase in period may be caused by the transfer of matter from the less massive component to the more massive component. The absolute physical parameters, orbital angular momentum, initial masses, and ages of these eight systems were calculated. Additionally, their mass-luminosity and mass-radius distributions were analyzed.

astro-ph.SR↗

arXiv2024

Systematic Uncertainties from Gribov Copies in Lattice Calculation of Parton Distributions in the Coulomb gauge

Recently, it has been proposed to compute parton distributions from boosted correlators fixed in the Coulomb gauge within the framework of Large-Momentum Effective Theory. This method does not involve Wilson lines and could greatly improve the efficiency and precision of lattice QCD calculations. However, there are concerns about whether the systematic uncertainties from Gribov copies, which correspond to the ambiguity in lattice gauge-fixing, are under control. This work gives an assessment of the Gribov copies' effect in the Coulomb-gauge-fixed quark correlators. We utilize different strategies for the Coulomb-gauge fixing, selecting two different groups of Gribov copies based on the lattice gauge configurations. We test the difference in the resulted spatial quark correlators in the vacuum and a pion state. Our findings indicate that the statistical errors of the matrix elements from both Gribov copies, regardless of the correlation range, decrease proportionally to the square root of the number of gauge configurations. The difference between the strategies does not show statistical significance compared to the gauge noise. This demonstrates that the effect of the Gribov copies can be neglected in the practical lattice calculation of the quark parton distributions.

hep-lat↗

arXiv2024

Predicting Long-Term Allograft Survival in Liver Transplant Recipients

Liver allograft failure occurs in approximately 20% of liver transplant recipients within five years post-transplant, leading to mortality or the need for retransplantation. Providing an accurate and interpretable model for individualized risk estimation of graft failure is essential for improving post-transplant care. To this end, we introduce the Model for Allograft Survival (MAS), a simple linear risk score that outperforms other advanced survival models. Using longitudinal patient follow-up data from the United States (U.S.), we develop our models on 82,959 liver transplant recipients and conduct multi-site evaluations on 11 regions. Additionally, by testing on a separate non-U.S. cohort, we explore the out-of-distribution generalization performance of various models without additional fine-tuning, a crucial property for clinical deployment. We find that the most complex models are also the ones most vulnerable to distribution shifts despite achieving the best in-distribution performance. Our findings not only provide a strong risk score for predicting long-term graft failure but also suggest that the routine machine learning pipeline with only in-distribution held-out validation could create harmful consequences for patients at deployment.

cs.LG↗

arXiv2024

Lattice QCD calculation of the pion distribution amplitude with domain wall fermions at physical pion mass

We present a direct lattice QCD calculation of the $x$-dependence of the pion distribution amplitude (DA), which is performed using the quasi-DA in large momentum effective theory on a domain-wall fermion ensemble at physical quark masses and spacing $a\approx 0.084$ fm. The bare quais-DA matrix elements are renormalized in the hybrid scheme and matched to $\overline{\rm MS}$ with a subtraction of the leading renormalon in the Wilson-line mass. For the first time, we include threshold resummation in the perturbative matching onto the light-cone DA, which resums the large logarithms in the soft gluon limit at next-to-next-to-leading log. The resummed results show controlled scale-variation uncertainty within the range of momentum fraction $x\in[0.25,0.75]$ at the largest pion momentum $P_z\approx 1.85$~GeV. In addition, we apply the same analysis to quasi-DAs from a highly-improved-staggered-quark ensemble at physical pion mass and $a=0.076$ fm. By comparison we find with $2σ$ confidence level that the DA obtained from chiral fermions is flatter and lower near $x=0.5$.

hep-lat↗

arXiv2024

PolyRoom: Room-aware Transformer for Floorplan Reconstruction

Reconstructing geometry and topology structures from raw unstructured data has always been an important research topic in indoor mapping research. In this paper, we aim to reconstruct the floorplan with a vectorized representation from point clouds. Despite significant advancements achieved in recent years, current methods still encounter several challenges, such as missing corners or edges, inaccuracies in corner positions or angles, self-intersecting or overlapping polygons, and potentially implausible topology. To tackle these challenges, we present PolyRoom, a room-aware Transformer that leverages uniform sampling representation, room-aware query initialization, and room-aware self-attention for floorplan reconstruction. Specifically, we adopt a uniform sampling floorplan representation to enable dense supervision during training and effective utilization of angle information. Additionally, we propose a room-aware query initialization scheme to prevent non-polygonal sequences and introduce room-aware self-attention to enhance memory efficiency and model performance. Experimental results on two widely used datasets demonstrate that PolyRoom surpasses current state-of-the-art methods both quantitatively and qualitatively. Our code is available at: https://github.com/3dv-casia/PolyRoom/.

cs.CV↗

arXiv2024

Non-perturbative Collins-Soper kernel: Chiral quarks and Coulomb-gauge-fixed quasi-TMD

We present the first lattice QCD calculation of the rapidity anomalous dimension of transverse-momentum-dependent distributions (TMDs), i.e. the Collins-Soper (CS) kernel, employing the recently proposed Coulomb-gauge-fixed quasi-TMD formalism as well as a chiral-symmetry preserving lattice discretization. This unitary lattice calculation is conducted using the domain wall fermion discretization scheme, a fine lattice spacing of approximately 0.08 fm, and physical values for light and strange quark masses. The CS kernel is determined analyzing the ratios of pion quasi-TMD wave functions (quasi-TMDWFs) at next-to-leading logarithmic (NLL) perturbative accuracy. Thanks to the absence of Wilson-lines, the Coulomb-gauge-fixed quasi-TMDWF demonstrates a remarkably slower decay of signals with increasing quark separations. This allows us to access the non-perturbative CS kernel up to transverse separations of 1 fm. For small transverse separations, our results agree well with perturbative predictions. At larger transverse separations, our non-perturbative CS kernel clearly favors certain global fits.

hep-lat↗

arXiv2024

Scalable Defect Detection via Traversal on Code Graph

Detecting defects and vulnerabilities in the early stage has long been a challenge in software engineering. Static analysis, a technique that inspects code without execution, has emerged as a key strategy to address this challenge. Among recent advancements, the use of graph-based representations, particularly Code Property Graph (CPG), has gained traction due to its comprehensive depiction of code structure and semantics. Despite the progress, existing graph-based analysis tools still face performance and scalability issues. The main bottleneck lies in the size and complexity of CPG, which makes analyzing large codebases inefficient and memory-consuming. Also, query rules used by the current tools can be over-specific. Hence, we introduce QVoG, a graph-based static analysis platform for detecting defects and vulnerabilities. It employs a compressed CPG representation to maintain a reasonable graph size, thereby enhancing the overall query efficiency. Based on the CPG, it also offers a declarative query language to simplify the queries. Furthermore, it takes a step forward to integrate machine learning to enhance the generality of vulnerability detection. For projects consisting of 1,000,000+ lines of code, QVoG can complete analysis in approximately 15 minutes, as opposed to 19 minutes with CodeQL.

cs.SE↗

arXiv2024

A WT-ResNet based fault diagnosis model for the urban rail train transmission system

This study presents a novel fault diagnosis model for urban rail transit systems based on Wavelet Transform Residual Neural Network (WT-ResNet). The model integrates the advantages of wavelet transform for feature extraction and ResNet for pattern recognition, offering enhanced diagnostic accuracy and robustness. Experimental results demonstrate the effectiveness of the proposed model in identifying faults in urban rail trains, paving the way for improved maintenance strategies and reduced downtime.

cs.IR↗

arXiv2024

Parton Distributions from Boosted Fields in the Coulomb Gauge

We propose a new method to calculate parton distribution functions (PDFs) from lattice correlations of boosted quarks and gluons in the Coulomb gauge. Compared to the widely used gauge-invariant Wilson-line operators, these correlations greatly simplify the renormalization thanks to the absence of linear power divergence. Besides, they enable access to larger off-axis momenta under preserved 3D rotational symmetry, as well as enhanced long-range precision that facilitates the Fourier transform. We verify the factorization formula that relates this new observable to the quark PDF at one-loop order in perturbation theory. Moreover, through a lattice calculation of the pion valence quark PDF, we demonstrate the aforementioned advantage and features of the Coulomb gauge correlation and show that it yields consistent result with the gauge-invariant method. This opens the door to a more efficient way to calculate parton physics on the lattice.

hep-ph↗