arXiv subjects

Xi Zhang

Publications and source records attributed to Xi Zhang.

At least 37 records · Page 2Linked to original sources

arXiv2026

Maximum-Likelihood--Based Position Decoding of Laser Processed Converging Pixel CsI: Tl Detectors for High-Resolution SPECT

This study demonstrates the feasibility of a novel fabrication technique for high spatial resolution CsI: Tl scintillation detectors tailored for single photon emission computed tomography (SPECT) systems. Building upon our previously developed laser induced optical barrier (LIOB) method, which achieved high spatial resolution, excellent sensitivity, and 100% fabrication yield in CsI: Tl detectors, we extend this approach to a converging-pixel architecture. A CsI: Tl crystal array with converging pixels was designed and fabricated, featuring entrance-face pixels of 1.6x1.6 mm2 and photodetector side pixels of 2x2 mm2. To localize gamma-ray interactions, both the center of gravity (CoG) algorithm and a maximum-likelihood (ML) based decoding method were implemented. A custom built four axis motion platform was developed to deliver a finely collimated pencil beam at precisely controlled positions and angles across the array, enabling generation of a comprehensive dataset for prior knowledge and validation. The results demonstrate an energy resolution of 11.79+/-0.53% (collimated experiment) and a position localization accuracy of 1.00+/-0.42 mm (nearest neighbor interpolation), confirming that the proposed converging-pixel architecture, combined with statistical decoding algorithms, provides a promising path toward the development of high-performance SPECT detectors.

physics.med-ph↗

arXiv2026

Factoring six-digit integers with superconducting quantum circuits

Integer factorization is a central computational problem with important applications in public-key cryptography. Here, we demonstrate a quantum factorization protocol using a superconducting circuit. Microwave drives are used to engineer a highly tunable effective two-level Hamiltonian whose eigenvalues can be measured spectroscopically. The target integer $N$ and each candidate factor pair ($p$,$q$) are encoded into the amplitudes, frequencies, and phases of the applied microwave fields. By scanning the candidate pairs while monitoring the spectral response at zero energy, we identify the factor pairs of integers up to six digits. The protocol requires neither two-qubit gates nor quantum entanglement. Its performance is currently limited by the precision of microwave control and the finite linewidth of the spectroscopic response. Improved control accuracy and longer coherence times would extend the accessible range of integers.

quant-ph↗

arXiv2026

A Blind Trust, the Bloody Thrust: When Attacker-Controlled Hook Updates Steer AI Agent Harnesses towards Malicious Behaviors

Modern AI agent harnesses expose lifecycle hooks that bind shell commands to runtime events such as session start, tool calls, and file edits. These commands run with host privileges yet ship as lifecycle-hook configuration and may fire at times the LLM never observes. We identify the lifecycle-hook update path, which harnesses trust blindly, as a new attack surface. Under a supply-chain threat model in which an attacker controls only plugin metadata and lifecycle-hook configuration, a benign versioned plugin can be trojanized by an update that silently binds attacker-chosen commands to benign events, yielding malicious host-side behavior such as privilege escalation. We propose HookPry, an open-source and fully automated attack framework that systematically exploits this vulnerability across heterogeneous AI agent harnesses. HookPry realizes ten attack objectives; across 25 combinations of harnesses and backends in 1,000 end-to-end runs, it compromises all seven evaluated harnesses, with per-harness success rates reaching 92.5%. Representative defenses remain insufficient: Microsoft Defender has 0% recall, and the union of three static defenses misses 47.5% of malicious artifacts.

cs.CR↗

arXiv2026

Accelerating Chemical Kinetics for Exoplanet Atmospheres using Neural Networks

Observations increasingly reveal the coupled radiative, chemical, and dynamical processes that shape exoplanet atmospheres. Interpreting these atmospheres requires models that can capture this complexity. However, multidimensional models remain fundamentally limited by computational cost, and answering key questions requires simulating the governing physical mechanisms at speeds classical methods cannot achieve. As a result, models often rely on simplifying approximations, such as equilibrium chemistry, even when those assumptions miss important effects. There is a pressing need for fast and accurate chemical kinetics solvers to model planetary atmospheres. Here we present a machine learning local-box chemical kinetics solver for exoplanet atmospheres using a residual flow-map architecture. We demonstrate that this surrogate model is several orders of magnitude faster than a classical solver, achieving microsecond-scale inference while retaining percent-level accuracy. The surrogate model covers a parameter space that spans $T=300$-$3000$ K, $P=10^{-6}$-$10^{4}$ bar, $Δt=10^{-3}$-$10^{8}$ s, and compositions ranging from $10^{-2}$ to $10^{3}$ times solar in both C/O ratio and metallicity. Our model outperforms several commonly used machine learning architectures and performs robustly under the extreme stiffness characteristic of atmospheric chemistry. The machine learning framework presented here is a flexible and efficient approach to emulating state-to-state flow-map problems that commonly arise in numerical simulations.

astro-ph.EP↗

arXiv2026

Propagation rates in integro-differential equations of ignition type

This paper provides sharp rates of invasion in nonlinear integro-differential equations of ignition type. The framework covers both integrable convolution kernels and singular fractional-type kernels. While the emergence of a threshold on the decay $1+2s$ of the jump kernel is expected from earlier works, far fewer quantitative results were available in such a general framework. In particular, in addition to the spreading rates, our study provides information on the shape of the invasion profiles. Importantly, we obtain the first sharp spreading estimate in the critical case $s=\frac12$, which separates linear-in-time and accelerated regimes.

math.AP↗

arXiv2026

Decoupled I/O-Dominant Pipelines for Large-Scale Whole-Slide Image Embedding Extraction

Whole-slide images (WSIs) are central to computational pathology but are prohibitively large, making patch-based processing the practical unit for foundation model inference. At scale, however, generating and handling massive numbers of patches on quickly introduces significant I/O and orchestration overhead, often dominating end-to-end performance. We present a decoupled, I/O-aware pipeline for large-scale WSI embedding extraction that decomposes the workflow into three stages: (1) patch generation and staging, (2) embarrassingly parallel embedding inference, and (3) sharded vector database ingestion. This design isolates data movement from compute, enabling efficient patch delivery, scalable multi-node inference with minimal communication. The resulting system produces a distributed vector database where embeddings are persistently coupled with rich metadata (e.g., patient, slide, and patch attributes), enabling efficient filtering, retrieval, and downstream reuse. This representation database is compact and reusable for tasks such as retrieval, classification, and few-shot learning, particularly benefiting low-resource environments. We show that decoupling I/O, computation, and ingestion enables high-throughput WSI embedding extraction at scale. By characterizing the scaling envelope, we demonstrate that storage dominates beyond moderate concurrency, reframing WSI embedding extraction as a data-centric systems problem rather than a purely compute-bound workload.

cs.DC↗

arXiv2026

Tabular Foundation Models for Multi-View Information Cascade Popularity Prediction

Predicting the future popularity of information cascades is essential for understanding information diffusion on social media. Despite recent advances, existing methods face two key limitations: they focus primarily on the cascade view while overlooking other information views that drive user engagement, such as textual semantics, visual content, and tabular attributes; and they fail to capture high-order cross-view interactions. To address these issues, we propose \textbf{TFM4POP}, the first framework to introduce tabular foundation models (TFMs) into popularity prediction, leveraging their pre-trained tabular priors to unify the modeling of multiple heterogeneous information views. Specifically, TFM4POP adopts a dual-branch design: the static branch employs a TFM as the feature-encoding backbone that jointly reasons over all static views through in-context learning to produce the static cascade representation, while the dynamic branch captures the continuous-time cascade dynamics with a dedicated Neural-ODE-based encoder. The two representations are then fused via cross-attention for the final prediction. Furthermore, to adapt the TFM to real cascade distributions, we apply parameter-efficient IA3 fine-tuning, achieving performance competitive with or better than full fine-tuning while updating substantially fewer parameters. In addition, we construct a comprehensive multi-view cascade benchmark that covers all four information views. Extensive experiments show that TFM4POP consistently outperforms state-of-the-art baselines across multiple datasets and observation settings.

cs.SI↗

arXiv2026

Backward Layout Search for Sequence-Constrained Robotic Assembly

Robotic assembly layout planning must determine the assembly site and the initial pose of each part while ensuring collision-free execution of a prescribed assembly sequence. This problem is challenging because the obstacle environment changes after each assembly step, and unassembled parts re maining in the workspace may block robot motions. We observe that the feasibility of each assembly step depends only on the initial poses of the current and later-assembled parts. Based on this dependency, we propose Backward Layout Search (BLS), which assigns initial part poses in reverse assembly order. Each expansion performs geometric, kinematic, grasp, and prescribed-motion checks, while collision masks and candidate set filtering remove infeasible initial part pose candidates. Promising partial layouts are retained through beam selection, and complete layouts are validated by full motion planning in forward assembly order. Experiments on five assembly models show that BLS produces collision-free executable layouts and reduces step evaluations and search time compared with a matched forward search.

cs.RO↗

arXiv2026

GraphWake: Group Polarization via Memory-Mediated Polarization Cascade in LLM-Agent Communities

LLM-driven agents can autonomously exchange opinions on online platforms and form communities. Such agent-operated social platforms raise a new security concern: attackers may manipulate agents to induce group polarization. Existing methods manipulate agent prompts or construct echo chambers, both of which are difficult to realize in practice. We therefore formulate a new threat, Memory-Mediated Polarization Cascade, which uses agent memory as a persistence channel and public discussion as a propagation channel. This threat contains three stages. During exposure and memory retention, the attacker exposes a small set of target agents to arguments that reinforce their respective stated stances. The targets' memory systems then process and retain these arguments. During retrieval and reproduction, a shared stance-neutral discussion cues the targets to retrieve and reproduce their respective retained arguments. During iterative propagation, untreated agents influenced by the reproduced arguments restate and spread them. We instantiate this threat in GraphWake with three components: (i) stance-support argumentation knowledge graphs construct knowledge-based arguments; (ii) axiom-oriented triple selection distills them for reliable retention and reproduction; and (iii) stance-neutral memory cueing triggers concurrent retrieval and reproduction, initiating propagation. Experiments across multiple discussions and memory systems show that GraphWake substantially increases group polarization. These findings reveal a community-level polarization risk.

cs.AI↗

arXiv2026

Optical-NIR Multi-band Photometric Analysis and Characterization of Giant Exoplanets with CPI-C

We present a multi-band photometric approach to characterize giant exoplanets, which represents one of the anticipated core scientific outcomes of Cool Planet Imaging Coronagraph (CPI-C). CPI-C operates with two observational channels covering visible and near-infrared wavelengths, each equipped with four broadband filters. The planet--star flux ratio integrated over each filter bandpass is calculated for photometric analysis. For cool planets observed in the visible bands, the data are primarily used to fit the overall spectral shape and methane-induced modulation, providing sensitivity to metallicity- and cloud-dependent spectral variations while constraining the reflected-light spectral shape and the combined scaling involving planet radius, orbital separation, and orbital phase. In the near-infrared bands, which probe thermal emission, the data help to better constrain fundamental planetary parameters including the effective temperature, radius, surface gravity and mass. For a synthetic giant planet with measurable reflected-light and thermal-emission components, the combined VIS4+NIR4 data provide tighter same-target constraints than either filter set alone, especially for the planet radius and cloud sedimentation parameter. Our simulations incorporate realistic instrument throughput, detector noise, and residual speckle noise. The results demonstrate that the eight-band design spanning visible to near-infrared wavelengths supports reflected-light diagnostics, thermal-emission characterization, and joint optical--NIR analysis of giant exoplanets within CPI-C science observations.

astro-ph.EP↗

arXiv2026

Juno Microwave Observations Reveal Jupiter's Deep Alkali-Chlorine Relation

The longest-wavelength channel of the Juno Microwave Radiometer (MWR) probes Jupiter's kilobar atmosphere through free electrons produced by sodium and potassium ionization. Under equilibrium chemistry the electron abundance is the small residual of the charge balance between alkali cations and the anions Cl- and HS-. Chlorine is not directly measurable in Jupiter's deep atmosphere because gaseous HCl is removed from the observable atmosphere by NH4Cl condensation, whereas sulfur has been measured by the Galileo probe. The MWR-derived electron measurement therefore constrains the alkali-to-chlorine ratio rather than the alkali abundance alone. We combine the MWR observations with equilibrium chemistry and microwave radiative transfer in a Bayesian framework, finding that the deep gas-phase elemental alkali-to-chlorine abundance ratio is (Na+K)/Cl = 0.05 over 0.3-5 times solar in chlorine, about 180 times below the protosolar ratio of 8.7. At 3 times solar chlorine, the inferred alkali metallicity is 1.6 x 10^-2 times solar (1 sigma: 1.2 x 10^-2 - 2.7 x 10^-2 times solar), while at low chlorine abundance HS- sets an alkali floor near 10^-3 times solar. The inferred gas-phase alkali abundance exceeds the ~10^-5 times solar threshold by more than two orders of magnitude and rules out the long-proposed global kilobar radiative zone. Because sodium and potassium are refractory whereas chlorine is volatile, the inferred ratio provides a new diagnostic of the rock-to-ice balance in the solids accreted by Jupiter. This compositional interpretation assumes equilibrium chemistry; if lofted mineral clouds instead control the electron abundance under disequilibrium conditions, the inferred alkali-chlorine relationship need not hold.

astro-ph.EP↗

arXiv2026

Alkali Metallicity, Mineral Clouds, and Deep Atmospheric Variability on Jupiter

The bulk elemental abundances of Jupiter provide critical insights into its formation history and interior structure. Recent observations by the Juno Microwave Radiometer (MWR) reveal a deep Jovian atmosphere significantly depleted in electrons, implying an alkali metal (Na, K) abundance of 10^-1 - 10^-5 times solar. This depletion stands in sharp contrast to the supersolar volatile enrichments measured by the Galileo probe. We propose that this apparent depletion arises from mineral cloud-induced processes deep in the atmosphere. We explore two physical mechanisms using thermochemical and microphysical modeling. In the "chemical sequestration" scenario, vigorous vertical mixing lofts deep refractory condensates (e.g., spinel) into the 1000-2000 bar region, where they react to form alkali feldspars (albite) and feldspathoids (leucite), efficiently sequestering gaseous Na and K. In the "dust-catalyzed recombination" scenario, the bulk alkali inventory remains gaseous, but the free electron density is suppressed by dust-plasma interactions. Thermally emitted alkali ions from the surfaces of micron-sized iron and silicate grains significantly increase the cation density, driving rapid recombination of free electrons. Both mechanisms allow for a bulk solar or even supersolar alkali inventory while suppressing the electron density to match Juno observations. Analyzing an extended dataset of MWR observations with 61 perijoves, we detect spatial variability in the deep atmosphere that suggests modulation by mineral clouds. Our findings challenge the traditional rainout framework, unveiling a deep "mineralogical zone" in Jupiter shaped by dynamics and heterogeneous chemistry, resembling the photospheres of hot exoplanets and brown dwarfs.

astro-ph.EP↗

arXiv2026

Qwen-CUA: Native Computer Use for (almost) Everything

Native computer use offers a general interface for agents to operate almost any software available to people, but requires long-horizon state tracking, large-scale interactive experience, and learning from sparse yet verifiable outcomes. We introduce Qwen-CUA, a native computer-use agent with a 397B-A17B Qwen mixture-of-experts backbone. It observes only screenshots and acts through keyboard and mouse events, without DOM trees, accessibility metadata, or task-specific APIs. Its scaffold maintains up to 20 active screenshots and folds older visual history in fixed-size blocks to retain recent evidence while preserving reusable prompt prefixes. For training, we build a cloud rollout fleet with access to nearly 100,000 vCPUs and tens of thousands of concurrent environments, construct approximately 40,000 verifiable tasks, and collect personalized long-horizon workflows across everyday and professional software. We optimize complete trajectories with verifiable rewards and trajectory slicing, while iterative training runs refresh supervised data and recalibrate reinforcement-learning tasks. Across eight benchmarks, Qwen-CUA outperforms Qwen3.7 and remains competitive with leading proprietary systems, reaching 86.2 on OSWorld-Verified and 18.5/48.4 binary/partial completion on OSWorld 2.0. Scaling the same recipe to a model with over one trillion parameters yields Qwen-CUA-Max, improving these scores to 87.6 and 21.2/53.3. Qwen-CUA also reduces RedTeamCUA attack success from 36.6 to 16.4 relative to Qwen3.7. Efficiency analyses, a browser deployment, and Bash-augmented experiments further characterize practical behavior. These results establish native computer use as a broadly capable agent foundation and highlight scalable verifiable interaction and hybrid tool use as key directions.

cs.LG↗

arXiv2026

A Physically Driven Parameterisation of Multidimensional Atmospheres: Application to the JWST Phase Curve of WASP-121b

Understanding the multidimensional structure of strongly irradiated exoplanets is essential for interpreting their atmospheric dynamics, chemistry and energy transport, yet current analyses remain limited by the difficulty of extracting reliable phase-resolved spectra and by the lack of physically interpretable parameterisations for retrievals. We combine a data-driven eclipse-normalisation method with an analytical three-dimensional temperature parameterisation derived from radiative, advective and diffusive energy balance and controlled by a few characteristic timescales. Applied to JWST/NIRSpec G395H observations of WASP-121b, the method yields spectra consistent with conventional phase-curve fitting, while the parameterisation reproduces the large-scale thermal structures predicted by general circulation models. The preferred retrieval reveals a pronounced day--night contrast, a dayside thermal inversion extending to both limbs, an inversion over part of the nightside, and limb temperatures differing by several hundred kelvin. Dynamical transport strengthens with pressure, and the hotspot offset increases from $\sim4^\circ$ to $\sim9^\circ$ across the pressures probed by G395H. The confined dayside hot region and the small, pressure-dependent offsets lie closer to the $\sim$3~G GCM than to its non-magnetic counterpart, although Rayleigh drag cannot be excluded. The spectra also favour distinct dayside and nightside chemical states, with more nightside CH$_4$ than the cooler temperatures alone can explain, pointing to disequilibrium chemistry. The retrieved thermal structure further implies an inhomogeneous cloud distribution, with condensation favoured on the nightside and cooler morning limb. The framework provides a computationally efficient, physically interpretable path from spectroscopic phase curves to multidimensional atmospheric structure.

astro-ph.EP↗

arXiv2026

An Ontology for Machine Learning Interatomic Potentials

Machine learning interatomic potentials (MLIPs) approximate quantum-mechanical energies and forces---conventionally computed by density functional theory (DFT) or wave-function methods---at a fraction of the cost. The field encompasses a growing ecosystem of algorithms, training datasets, hyperparameters, and target materials, yet the metadata needed to systematically compare, reproduce, and build upon MLIP studies remains scattered across papers, scripts, and ad-hoc file formats. We present the MLIPs ontology, an OWL 2 DL ontology that captures the concepts needed to describe MLIP methods, their hyperparameters, training datasets with DFT provenance, and published benchmarks. The ontology is organized into three modules---Method, Training Data, and Benchmark---and connects existing ontologies in materials science (MDO, CMSO/ASMO) and machine learning (ML-Schema), complementing dataset-side schemas such as Croissant. It declares 27 formal axioms enforcing data completeness and consistency, including property chains that link trained models to their methods and training data. We demonstrate the ontology through a running example based on Moment Tensor Potentials and evaluate it through competency-question execution on a 20-paper seeded knowledge graph, OWL reasoning, and comparison with existing ontologies.

cs.AI↗

arXiv2026

Methane on the temperate exo-Saturn TOI-199b

Temperate ($T_{\rm eq}<400$ K) gas giants represent an unexplored frontier in exoplanet atmospheric spectroscopy. Orbiting a G-type star every $\sim100$ days, the Saturn-mass exoplanet TOI-199 b ($T_{\rm eq}=350$ K) is one of the most favorable low-temperature gas giants for atmospheric study. Here, we present its transmission spectrum from a single transit observed with JWST's NIRSpec G395M mode. Despite lower-than-nominal precision due to a pointing misalignment, the spectrum reveals the presence of CH$_4$ (Bayes factor of $\sim$700 in a cloudy atmosphere), corresponding to a metallicity of $\rm{C/H}=13^{+78}_{-12}\times$ solar, although the absence of detectable CO and CO$_2$ at the current precision disfavors metallicities $\gtrsim50\times$ solar. We also tested several haze prescriptions (Titan-like tholin, soot, and water-rich tholin), but the preference for these models is weak (Bayes factors of $\sim 2$ relative to the clear case). The spectrum also shows an increase in transit depth near 3 $μ$m, which our self-consistent models attribute to either NH$_3$ or, less likely, HCN. Follow-up observations could distinguish between these species, helping determine the planet's vertical mixing regime. The TOI-199 system exhibits strong transit timing variations (TTVs) due to an outer non-transiting giant planet. For planet c, our TTV analysis reduces its mass uncertainty by 50% and prefers a slightly longer orbital period (but still within the conservative habitable zone) and higher eccentricity relative to previous studies. TOI-199 b serves as the first data point for studying clouds and hazes in temperate gas giants, with the detection of spectral features in its transmission spectrum indicating that temperate gas giants are promising targets for detailed atmospheric characterization.

astro-ph.EP↗

arXiv2026

Attribution-Guided Continual Learning for Large Language Models

Large language models (LLMs) often suffer from catastrophic forgetting in continual learning: after learning new tasks sequentially, they perform worse on earlier tasks. Existing methods mitigate catastrophic forgetting by data replay, parameter freezing, or regularization. However, these methods lack understanding of LLM mechanisms and cannot distinguish which parameters store important knowledge from previous tasks and which parameters can be updated for new tasks. To address this, we propose the attribution-guided continual fine-tuning framework that leverages Layer-wise Relevance Propagation (LRP) to estimate parameter importance based on the internal computational process of LLMs. During continual learning, parameters critical to previous tasks are constrained to receive smaller updates, while less relevant parameters remain available for learning new tasks. Extensive experiments show that, compared with baseline methods, our approach reduces catastrophic forgetting while preserving adaptability to new tasks, highlighting the value of mechanistic attribution for continual fine-tuning of LLMs.

cs.LG↗

arXiv2026

Towards the Explainability of Temporal Graph Networks via Memory Backtracking and Topological Attribution

Temporal graphs are ubiquitous in real-world applications and Temporal Graph Networks (TGNs) have achieved superior predictive accuracy. Understanding which historical events drive model predictions can enhance trustworthiness of TGNs. Existing explanation methods overlook the memory module, the core component that records and updates node histories, leaving the influence of past events unexplored. To address this, we attribute TGNs predictions through the topology attribution tree and memory backtracking tree. The topology attribution tree captures the influence of neighbors and their memory vectors, then the memory backtracking tree quantifies how historical events shape node memory vectors. We apply the LRP in TGNs, ensuring that the total contribution of events equals the logits of model. Finally, top-k selection may be unfaithful due to the nonlinear mapping from logits to probabilities, we design optimization objectives to identify the important events. Experiments on nine temporal graph datasets, spanning node property prediction, link prediction tasks and graph classification tasks, show that our method provides faithful explanations and outperforms state-of-the-art baselines. The code is available at https://github.com/yazhengliu/MemExplainer

cs.LG↗