arXiv subjects

Wouter Mostert

Publications and source records attributed to Wouter Mostert.

8 recordsLinked to original sources

arXiv2026

Numerical simulations of simultaneous pair-drop impacts and their energetics

We present three-dimensional direct numerical simulations of the simultaneous impact of two identical drops on an hydrophobic substrate, varying the relative strength of capillary and viscous effects respectively through Weber and Reynolds numbers of impact. The interaction between the two drops is characterized by the appearance of a lamella arising from the collision of the two droplets' spreading rims. We examine the width, the height, and the general morphological evolution of the central sheet; the numerical data is validated against prior experiments and used to guide the development of an energetic model for the maximum elevation of the central sheet. In particular, the rise of the central sheet resembles the spreading behaviour single-drop impacts, especially at high Weber and Reynolds numbers. This fact can be used to estimate scalings in the capillary- and viscous-dominated regimes, which can be used to collapse the trajectories. These insights provide a route for a more complete understanding of the dynamics for the central rising sheet, and anticipate the detailed study of its fragmentation characteristics

physics.flu-dyn↗

arXiv2025

A physically-informed sea spray generation model for splashing waves

Large sea spray drops - of up to 2mm in diameter - constitute one of the most uncertain factors controlling the intensification of hurricanes and severe storms because their generation mechanisms are not understood. Wave splashing produces among the largest spray drops, but observational data regarding these drops is difficult to obtain and hence cannot inform current modelling efforts. In this study, we instead propose a sea spray generation function (SSGF) for ocean wave splashing by assembling a model from first principles. First, we introduce the transverse collision of two cylindrical liquid rims as the basic mechanism for drop production. We characterize the resulting drop production in terms of three competing processes: ligament production and merging, drop generation by end-pinching, and gravity which arrests the mechanism. Second, we formulate a theoretical model which explains the drop size distributions produced by the colliding rims and test it against existing experimental and numerical data. Finally, the model can be developed into a full SSGF by incorporating sea state information with relatively few tuning parameters. The model is flexible and can be extended by including related effects such as finite droplet lifetime and secondary breakup. Altogether, our model suggests that wave splashing can efficiently produce numerous secondary droplets, challenging prior assumptions that it is an inefficient generation mechanism for sea spray.

physics.flu-dyn↗

arXiv2024

Discovering Boundary Equations for Wave Breaking using Machine Learning

Many supervised machine learning methods have revolutionised the empirical modelling of complex systems. These empirical models, however, are usually "black boxes" and provide only limited physical explanations about the underlying systems. Instead, so-called "knowledge discovery" methods can be used to explore the governing equations that describe observed phenomena. This paper focuses on how we can use such methods to explore underlying physics and also model a commonly observed yet not fully understood phenomenon - the breaking of ocean waves. In our work, we use symbolic regression to explore the equation that describes wave-breaking evolution from a dataset of in silico waves generated using expensive numerical methods. Our work discovers a new boundary equation that provides a reduced-order description of how the surface elevation (i.e., the water-air interface) evolves forward in time, including the instances when the wave breaks - a problem that has defied traditional approaches. Compared to the existing empirical models, the unique equation-based nature of our model allows further mathematical interpretation, which provides an opportunity to explore the fundamentals of breaking waves. Further expert-AI collaborative research reveals the physical meaning of each term of the discovered equation, which suggests a new characteristic of breaking waves in deep water - a decoupling between the water-air interface and the fluid velocities. This novel reduced-order model also hints at computationally efficient ways to simulate breaking waves for engineering applications.

physics.flu-dyn↗

arXiv2024

Droplet Bag Formation in Turbulent Airflows

We present novel numerical simulations investigating the evolution of liquid droplets into bag-like structures in turbulent airflows. The droplet bag breakup problem is of significance for many multiphase processes in scientific and engineering applications. Turbulent fluctuations are introduced synthetically into a mean flow, and the droplet is inserted when the air-phase turbulence reaches a statistically stationary state. The morphological evolution of the droplet under different turbulence configurations is retrieved and analysed in comparison with laminar aerobreakup results. While the detailed evolution history of individual droplets varies widely between different realisations of the turbulent flow, common dynamic and morphological evolution patterns are observed. The presence of turbulence is found to enhance the drag coefficient of the droplet as it flattens. At late times, the droplet becomes tilted and increasingly corrugated under strong turbulence intensity. We quantify these phenomena and discuss their possible governing mechanisms associated with turbulence intermittency. Lastly, the influences of liquid-gas viscosity ratio are examined and the implications of air-phase turbulence on the later bag film breakup process are discussed.

physics.flu-dyn↗

arXiv2023

Fragmentation of Colliding Liquid Rims

We present direct numerical simulations of the splashing process between two cylindrical liquid rims. This belongs to a class of impact and collision problems with a wide range of applications in science and engineering, and motivated here by splashing of breaking ocean waves. Interfacial perturbations with a truncated white noise frequency profile are introduced to the rims before their collision, whose subsequent morphological development is simulated by solving the two-phase incompressible Navier-Stokes equation with the adaptive mesh refinement (AMR) technique, within the Basilisk software environment. We first derive analytical solutions predicting the unsteady interfacial and velocity profiles of the expanding sheet forming between the two rims, and develop scaling laws for the evolution of the lamella rim under capillary deceleration. We then analyse the formation and growth of transverse ligaments ejected from the lamella rims, which we find to originate from the initial corrugated geometry of the perturbed rim surface. Novel scaling models are proposed for predicting the decay of the ligament number density due to the ongoing ligament merging phenomenon, and found to agree well with the numerical results presented here. The role of the mechanism in breaking waves is discussed further and necessary next steps in the problem are identified.

physics.flu-dyn↗

arXiv2022

Bag Film Breakup of Droplets in Uniform Airflows

We present novel numerical simulations investigating the bag breakup of liquid droplets. We first examine the viscous effect on drop deformation before the onset of bag breakup, comparing with theory and experiment. Next, a bag film forms at late time and is susceptible to spurious mesh-induced breakup in numerical simulations, which has prevented previous studies from reaching grid convergence of fragment statistics. We therefore adopt the manifold death (MD) algorithm which artificially perforates thin films once they reach a prescribed critical thickness independent of the grid size, controlled by a numerical parameter $L_{\rm sig}$. We show grid convergence of fragment statistics when utilising the MD algorithm, and analyse the fragment behaviour and bag film disintegration mechanisms including ligament breakup, node detachment and rim destabilisation. Our choice of the critical thickness parameter $L_{\rm sig}$ is limited by numerical constraints and thus has not been matched to experiment or theory; consequently, the current simulations yield critical bag film perforation thicknesses larger than experimentally observed. The influence of the MD algorithm configuration on the bag breakup phenomena and statistics will be investigated in future work. We also study the effects of moderate liquid Ohnesorge number ($0.005 \leq Oh \leq 0.05$) on the bag breakup process and fragment statistics, where a non-monotonic dependency of the average diameter of bag film fragments on $Oh$ is found. These results highlight the utility of the MD algorithm in multiphase simulations involving topological changes, and pave the way for physics-based numerical investigations into spume generation at the air-sea interface.

physics.flu-dyn↗

arXiv2021

High-resolution direct simulation of deep water breaking waves: transition to turbulence, bubbles and droplet production

[Abridged]We present high-resolution three-dimensional direct numerical simulations of breaking waves solving the two-phase Navier-Stokes equations. We investigate the role of the Reynolds and Bond numbers on the energy, bubble and droplet statistics of strong plunging breakers, and explore the asymptotic regimes at high Reynolds and Bond numbers to be compared with laboratory breaking waves. Energetically, the breaking wave transitions from laminar to three-dimensional turbulent flow on a timescale that depends on the turbulent Reynolds number up to a limiting value of $Re_\lambda \sim 100$, consistent with the mixing transition observed in other canonical turbulent flows. We characterize the role of capillary effects on the impacting jet and ingested main cavity shape and subsequent fragmentation process. We confirm two regimes in the bubble size distribution, separated by the Hinze scale $r_H$. We extend the buoyant-energetic scaling of Deike et al. (2016) to account for the cavity shape and its scale separation from the Hinze scale. We show resolved bubbles up to one order of magnitude below the Hinze scale and observe a good collapse of the numerical data compared to laboratory breaking waves (Deane and Stokes 2002). We resolve droplet statistics at high Bond number and our data show good agreement with recent experiments (Erinin et al., 2009) in various statistics. We discuss velocity distributions for the droplets, finding ejection velocities up to four times the phase speed of the wave, which are produced during the most intense splashing events of the breaking process.

physics.flu-dyn↗

arXiv2020

Bubble deformation by a turbulent flow

We investigate the modes of deformation of an initially spherical bubble immersed in a homogeneous and isotropic turbulent background flow. We perform direct numerical simulations of the two-phase incompressible Navier-Stokes equations, considering a low-density bubble in the high density turbulent flow at various Weber number (the ratio of turbulent and surface tension forces) using the air-water density ratio. We discuss a theoretical framework for the bubble deformation in a turbulent flow using a spherical harmonic decomposition. We propose, for each mode of bubble deformation, a forcing term given by the statistics of velocity and pressure fluctuations, evaluated on a sphere of the same radius. This approach formally relates the bubble deformation and the background turbulent velocity fluctuations, in the limit of small deformations. The growth of the total surface deformation and of each individual mode is computed from the direct numerical simulations using an appropriate Voronoi decomposition of the bubble surface. We show that two successive temporal regimes occur: the first regime corresponds to deformations driven only by inertial forces, with the interface deformation growing linearly in time, in agreement with the model predictions, whereas the second regime results from a balance between inertial forces and surface tension. The transition time between the two regimes is given by the period of the first Rayleigh mode of bubble oscillation. We discuss how our approach can be used to relate the bubble lifetime to the turbulence statistics and eventually show that at high Weber number, bubble lifetime can be deduced from the statistics of turbulent fluctuations at the bubble scale.

physics.flu-dyn↗