arXiv Science⌕ Search

arXiv subjects

Wolfgang Mulzer

Publications and source records attributed to Wolfgang Mulzer.

At least 19 recordsLinked to original sources
arXiv2026

Near-Linear and Parameterized Approximations for Maximum Cliques in Disk Graphs

A \emph{disk graph} is the intersection graph of (closed) disks in the plane. We consider the classic problem of finding a maximum clique in a disk graph. For general disk graphs, the complexity of this problem is still open, but for unit disk graphs, it is well known to be in P. The currently fastest algorithm runs in time $O(n^{7/3+ o(1)})$, where $n$ denotes the number of disks~\cite{EspenantKM23, keil_et_al:LIPIcs.SoCG.2025.63}. Moreover, for the case of disk graphs with $t$ distinct radii, the problem has also recently been shown to be in XP. More specifically, it is solvable in time $O^*(n^{2t})$~\cite{keil_et_al:LIPIcs.SoCG.2025.63}. In this paper, we present algorithms with improved running times by allowing for approximate solutions and by using randomization: - for unit disk graphs, we give an algorithm that, with constant success probability, computes a $(1-\varepsilon)$-approximate maximum clique in expected time $\tilde{O}(n/\varepsilon^2)$; and - for disk graphs with $t$ distinct radii, we give a parameterized approximation scheme that, with a constant success probability, computes a $(1-\varepsilon)$-approximate maximum clique in expected time $\tilde{O}(f(t)\cdot (1/\varepsilon)^{O(t)} \cdot n)$, for some (exponential) function $f(t)$.

cs.CG↗
arXiv2024

Robust Algorithms for Finding Triangles and Computing the Girth in Unit Disk and Transmission Graphs

We describe optimal robust algorithms for finding a triangle and the unweighted girth in a unit disk graph, as well as finding a triangle in a transmission graph.In the robust setting, the input is not given as a set of sites in the plane, but rather as an abstract graph. The input may or may not be realizable as a unit disk graph or a transmission graph. If the graph is realizable, the algorithm is guaranteed to give the correct answer. If not, the algorithm will either give a correct answer or correctly state that the input is not of the required type.

cs.CG↗
arXiv2024

Dynamic Connectivity in Disk Graphs

Let $S$ be a set of $n$ sites in the plane, so that every site $s \in S$ has an associated radius $r_s > 0$. Let $\mathcal{D}(S)$ be the disk intersection graph defined by $S$, i.e., the graph with vertex set $S$ and an edge between two distinct sites $s, t \in S$ if and only if the disks with centers $s$, $t$ and radii $r_s$, $r_t$ intersect.Our goal is to design data structures that maintain the connectivity structure of $\mathcal{D}(S)$ as sites are inserted and/or deleted in $S$.

cs.CG↗
arXiv2024

Long Plane Trees

In the longest plane spanning tree problem, we are given a finite planar point set $\mathcal{P}$, and our task is to find a plane (i.e., noncrossing) spanning tree for $\mathcal{P}$ with maximum total Euclidean edge length. Despite more than two decades of research, it remains open whether this problem is NP-hard. Thus, previous efforts have focused on olynomial-time algorithms that produce plane trees whose total edge length approximates $\text{OPT}$, the maximum possible length. The approximate trees in these algorithms all have small unweighted diameter, typically three or four. It is natural to ask whether this is a common feature of longest plane spanning trees, or an artifact of the specific approximation algorithms. We provide three results to elucidate the interplay between the approximation guarantee and the unweighted diameter of the approximate trees. First, we describe a polynomial-time algorithm to construct a plane tree with diameter at most four and total edge length at least $0.546 \cdot \text{OPT}$. This constitutes a substantial improvement over the state of the art. Second, we show that a longest plane tree among those with diameter at most three can be found in polynomial time. Third, for any candidate diameter $d \geq 3$, we provide upper bounds on the approximation factor that can be achieved by a longest plane tree with diameter at most $d$ (compared to a longest plane tree without constraints).

cs.CG↗
arXiv2024

Maximum Matchings in Geometric Intersection Graphs

Let $G$ be an intersection graph of $n$ geometric objects in the plane. We show that a maximum matching in $G$ can be found in $O(ρ^{3ω/2}n^{ω/2})$ time with high probability, where $ρ$ is the density of the geometric objects and $ω>2$ is a constant such that $n \times n$ matrices can be multiplied in $O(n^ω)$ time. The same result holds for any subgraph of $G$, as long as a geometric representation is at hand. For this, we combine algebraic methods, namely computing the rank of a matrix via Gaussian elimination, with the fact that geometric intersection graphs have small separators. We also show that in many interesting cases, the maximum matching problem in a general geometric intersection graph can be reduced to the case of bounded density. In particular, a maximum matching in the intersection graph of any family of translates of a convex object in the plane can be found in $O(n^{ω/2})$ time with high probability, and a maximum matching in the intersection graph of a family of planar disks with radii in $[1, Ψ]$ can be found in $O(Ψ^6\log^{11} n + Ψ^{12 ω} n^{ω/2})$ time with high probability.

cs.CG↗
arXiv2023

No-dimensional Tverberg Theorems and Algorithms

Tverberg's theorem states that for any $k \ge 2$ and any set $P \subset \mathbb{R}^d$ of at least $(d + 1)(k - 1) + 1$ points in $d$ dimensions, we can partition $P$ into $k$ subsets whose convex hulls have a non-empty intersection. The associated search problem of finding the partition lies in the complexity class $\text{CLS} = \text{PPAD} \cap \text{PLS}$, but no hardness results are known. In the colorful Tverberg theorem, the points in $P$ have colors, and under certain conditions, $P$ can be partitioned into colorful sets, in which each color appears exactly once and whose convex hulls intersect. To date, the complexity of the associated search problem is unresolved. Recently, Adiprasito, Barany, and Mustafa gave a no-dimensional Tverberg theorem, in which the convex hulls may intersect in an approximate fashion. This relaxes the requirement on the cardinality of $P$. The argument is constructive, but does not result in a polynomial-time algorithm. We present a deterministic algorithm that finds for any $n$-point set $P \subset \mathbb{R}^d$ and any $k \in \{2, \dots, n\}$ in $O(nd \lceil{\log k}\rceil)$ time a $k$-partition of $P$ such that there is a ball of radius $O\left((k/\sqrt{n})\mathrm{diam(P)}\right)$ that intersects the convex hull of each set. Given that this problem is not known to be solvable exactly in polynomial time, our result provides a remarkably efficient and simple new notion of approximation. Our main contribution is to generalize Sarkaria's method to reduce the Tverberg problem to the Colorful Caratheodory problem (in the simplified tensor product interpretation of Barany and Onn) and to apply it algorithmically. It turns out that this not only leads to an alternative algorithmic proof of a no-dimensional Tverberg theorem, but it also generalizes to other settings such as the colorful variant of the problem.

cs.CG↗
arXiv2023

Maintaining the Union of Unit Discs under Insertions with Near-Optimal Overhead

We present efficient dynamic data structures for maintaining the union of unit discs and the lower envelope of pseudo-lines in the plane. More precisely, we present three main results in this paper: (i) We present a linear-size data structure to maintain the union of a set of unit discs under insertions. It can insert a disc and update the union in $O((k+1) \log^2 n)$ time, where $n$ is the current number of unit discs and $k$ is the combinatorial complexity of the structural change in the union due to the insertion of the new disc. It can also compute, within the same time bound, the area of the union after the insertion of each disc. (ii) We propose a linear-size data structure for maintaining the lower envelope of a set of $x$-monotone pseudo-lines. It can handle insertion/deletion of a pseudo-line in $O(\log^2 n)$ time; for a query point $x_0\in\mathbb{R}$, it can report, in $O(\log n)$ time, the point on the lower envelope with $x$-coordinate $x_0$; and for a query point $q\in\mathbb{R}^2$, it can return all $k$ pseudo-lines lying below $q$ in time $O(\log n+k\log^2 n)$. (iii) We present a linear-size data structure for storing a set of circular arcs of unit radius (not necessarily on the boundary of the union of the corresponding discs), so that for a query unit disc $D$, all input arcs intersecting $D$ can be reported in $O(n^{1/2+\varepsilon} + k)$ time, where $k$ is the output size and $\varepsilon > 0$ is an arbitrarily small constant. A unit-circle arc can be inserted or deleted in $O(\log^2 n)$ time.

cs.CG↗
arXiv2023

Insertion-Only Dynamic Connectivity in General Disk Graphs

Let $S \subseteq \mathbb{R}^2$ be a set of $n$ \emph{sites} in the plane, so that every site $s \in S$ has an \emph{associated radius} $r_s > 0$. Let $D(S)$ be the \emph{disk intersection graph} defined by $S$, i.e., the graph with vertex set $S$ and an edge between two distinct sites $s, t \in S$ if and only if the disks with centers $s$, $t$ and radii $r_s$, $r_t$ intersect. Our goal is to design data structures that maintain the connectivity structure of $D(S)$ as $S$ changes dynamically over time. We consider the incremental case, where new sites can be inserted into $S$. While previous work focuses on data structures whose running time depends on the ratio between the smallest and the largest site in $S$, we present a data structure with $O(α(n))$ amortized query time and $O(\log^6 n)$ expected amortized insertion time.

cs.CG↗
arXiv2023

Minimum Cuts in Geometric Intersection Graphs

Let $\mathcal{D}$ be a set of $n$ disks in the plane. The disk graph $G_\mathcal{D}$ for $\mathcal{D}$ is the undirected graph with vertex set $\mathcal{D}$ in which two disks are joined by an edge if and only if they intersect. The directed transmission graph $G^{\rightarrow}_\mathcal{D}$ for $\mathcal{D}$ is the directed graph with vertex set $\mathcal{D}$ in which there is an edge from a disk $D_1 \in \mathcal{D}$ to a disk $D_2 \in \mathcal{D}$ if and only if $D_1$ contains the center of $D_2$. Given $\mathcal{D}$ and two non-intersecting disks $s, t \in \mathcal{D}$, we show that a minimum $s$-$t$ vertex cut in $G_\mathcal{D}$ or in $G^{\rightarrow}_\mathcal{D}$ can be found in $O(n^{3/2}\text{polylog} n)$ expected time. To obtain our result, we combine an algorithm for the maximum flow problem in general graphs with dynamic geometric data structures to manipulate the disks. As an application, we consider the barrier resilience problem in a rectangular domain. In this problem, we have a vertical strip $S$ bounded by two vertical lines, $L_\ell$ and $L_r$, and a collection $\mathcal{D}$ of disks. Let $a$ be a point in $S$ above all disks of $\mathcal{D}$, and let $b$ a point in $S$ below all disks of $\mathcal{D}$. The task is to find a curve from $a$ to $b$ that lies in $S$ and that intersects as few disks of $\mathcal{D}$ as possible. Using our improved algorithm for minimum cuts in disk graphs, we can solve the barrier resilience problem in $O(n^{3/2}\text{polylog} n)$ expected time.

cs.CG↗
arXiv2023

On the Stretch Factor of Polygonal Chains

Let $P=(p_1, p_2, \dots, p_n)$ be a polygonal chain in $\mathbb{R}^d$. The stretch factor of $P$ is the ratio between the total length of $P$ and the distance of its endpoints, $\sum_{i = 1}^{n-1} |p_i p_{i+1}|/|p_1 p_n|$. For a parameter $c \geq 1$, we call $P$ a $c$-chain if $|p_ip_j|+|p_jp_k| \leq c|p_ip_k|$, for every triple $(i,j,k)$, $1 \leq i 0$, there is a noncrossing $c$-chain that has stretch factor $Ω(n^{1/2-\varepsilon})$, for sufficiently large constant $c=c(\varepsilon)$; (ii) on the other hand, the stretch factor of a $c$-chain $P$ is $O\left(n^{1/2}\right)$, for every constant $c\geq 1$, regardless of whether $P$ is crossing or noncrossing; and (iii) we give a randomized algorithm that can determine, for a polygonal chain $P$ in $\mathbb{R}^2$ with $n$ vertices, the minimum $c\geq 1$ for which $P$ is a $c$-chain in $O\left(n^{2.5}\ \mathrm{polylog}\ n\right)$ expected time and $O(n\log n)$ space. These results generalize to $\mathbb{R}^d$. For every dimension $d\geq 2$ and every $\varepsilon>0$, we construct a noncrossing $c$-chain that has stretch factor $Ω\left(n^{(1-\varepsilon)(d-1)/d}\right)$; on the other hand, the stretch factor of any $c$-chain is $O\left((n-1)^{(d-1)/d}\right)$; for every $c>1$, we can test whether an $n$-vertex chain in $\mathbb{R}^d$ is a $c$-chain in $O\left(n^{3-1/d}\ \mathrm{polylog}\ n\right)$ expected time and $O(n\log n)$ space.

cs.CG↗
arXiv2022

Flipping Plane Spanning Paths

Let $S$ be a planar point set in general position, and let $\mathcal{P}(S)$ be the set of all plane straight-line paths with vertex set $S$. A flip on a path $P \in \mathcal{P}(S)$ is the operation of replacing an edge $e$ of $P$ with another edge $f$ on $S$ to obtain a new valid path from $\mathcal{P}(S)$. It is a long-standing open question whether for every given point set $S$, every path from $\mathcal{P}(S)$ can be transformed into any other path from $\mathcal{P}(S)$ by a sequence of flips. To achieve a better understanding of this question, we show that it is sufficient to prove the statement for plane spanning paths whose first edge is fixed. Furthermore, we provide positive answers for special classes of point sets, namely, for wheel sets and generalized double circles (which include, e.g., double chains and double circles).

cs.CG↗
arXiv2022

Well-Separation and Hyperplane Transversals in High Dimensions

A family of $k$ point sets in $d$ dimensions is well-separated if the convex hulls of any two disjoint subfamilies can be separated by a hyperplane. Well-separation is a strong assumption that allows us to conclude that certain kinds of generalized ham-sandwich cuts for the point sets exist. But how hard is it to check if a given family of high-dimensional point sets has this property? Starting from this question, we study several algorithmic aspects of the existence of transversals and separations in high-dimensions. First, we give an explicit proof that $k$ point sets are well-separated if and only if their convex hulls admit no $(k - 2)$-transversal, i.e., if there exists no $(k - 2)$-dimensional flat that intersects the convex hulls of all $k$ sets. It follows that the task of checking well-separation lies in the complexity class coNP. Next, we show that it is NP-hard to decide whether there is a hyperplane-transversal (that is, a $(d - 1)$-transversal) of a family of $d + 1$ line segments in $\mathbb{R}^d$, where $d$ is part of the input. As a consequence, it follows that the general problem of testing well-separation is coNP-complete. Furthermore, we show that finding a hyperplane that maximizes the number of intersected sets is NP-hard, but allows for an $Ω\left(\frac{\log k}{k \log \log k}\right)$-approximation algorithm that is polynomial in $d$ and $k$, when each set consists of a single point. When all point sets are finite, we show that checking whether there exists a $(k - 2)$-transversal is in fact strongly NP-complete.

cs.CG↗
arXiv2022

Unique Sink Orientations of Grids is in Unique End of Potential Line

The complexity classes Unique End of Potential Line (UEOPL) and its promise version PUEOPL were introduced in 2018 by Fearnly et al. UEOPL captures search problems where the instances are promised to have a unique solution. UEOPL captures total search versions of these promise problems. The promise problems can be made total by defining violations that are returned as a short certificate of an unfulfilled promise. GridUSO is the problem of finding the sink in a grid with a unique sink orientation. It was introduced by Gärtner et al. We describe a promise preserving reduction from GridUSO to UniqueForwardEOPL, a UEOPL-complete problem. Thus, we show that GridUSO is in UEOPL and its promise version is in PUEOPL.

cs.CG↗
arXiv2022

Nearest-Neighbor Decompositions of Drawings

Let $\mathcal{D}$ be a set of straight-line segments in the plane, potentially crossing, and let $c$ be a positive integer. We denote by $P$ the union of the endpoints of the straight-line segments of $\mathcal{D}$ and of the intersection points between pairs of segments. We say that $\mathcal{D}$ has a nearest-neighbor decomposition into $c$ parts if we can partition $P$ into $c$ point sets $P_1, \ldots, P_c$ such that $\mathcal{D}$ is the union of the nearest neighbor graphs on $P_1, \ldots, P_c$. We show that it is NP-complete to decide whether $\mathcal{D}$ can be drawn as the union of $c\geq 3$ nearest-neighbor graphs, even when no two segments cross. We show that for $c = 2$, it is NP-complete in the general setting and polynomial-time solvable when no two segments cross. We show the existence of an $O(\log n)$-approximation algorithm running in subexponential time for partitioning $\mathcal{D}$ into a minimum number of nearest-neighbor graphs. As a main tool in our analysis, we establish the notion of the conflict graph for a drawing $\mathcal{D}$. The vertices of the conflict graph are the connected components of $\mathcal{D}$, with the assumption that each connected component is the nearest neighbor graph of its vertices, and there is an edge between two components $U$ and $V$ if and only if the nearest neighbor graph of $U \cup V$ contains an edge between a vertex in $U$ and a vertex in $V$. We show that string graphs are conflict graphs of certain planar drawings. For planar graphs and complete $k$-partite graphs, we give additional, more efficient constructions. We furthermore show that there are subdivisions of non-planar graphs that are not conflict graphs. Lastly, we show a separator lemma for conflict graphs.

cs.CG↗
arXiv2022

Compatible Spanning Trees in Simple Drawings of $K_n$

For a simple drawing $D$ of the complete graph $K_n$, two (plane) subdrawings are compatible if their union is plane. Let $\mathcal{T}_D$ be the set of all plane spanning trees on $D$ and $\mathcal{F}(\mathcal{T}_D)$ be the compatibility graph that has a vertex for each element in $\mathcal{T}_D$ and two vertices are adjacent if and only if the corresponding trees are compatible. We show, on the one hand, that $\mathcal{F}(\mathcal{T}_D)$ is connected if $D$ is a cylindrical, monotone, or strongly c-monotone drawing. On the other hand, we show that the subgraph of $\mathcal{F}(\mathcal{T}_D)$ induced by stars, double stars, and twin stars is also connected. In all cases the diameter of the corresponding compatibility graph is at most linear in $n$.

math.CO↗
arXiv2021

Stabbing Pairwise Intersecting Disks by Five Points

Suppose we are given a set $\mathcal{D}$ of $n$ pairwise intersecting disks in the plane. A planar point set $P$ stabs $\mathcal{D}$ if and only if each disk in $\mathcal{D}$ contains at least one point from $P$. We present a deterministic algorithm that takes $O(n)$ time to find five points that stab $\mathcal{D}$. Furthermore, we give a simple example of 13 pairwise intersecting disks that cannot be stabbed by three points. Moreover, we present a simple argument showing that eight disks can be stabbed by at most three points. This provides a simple-albeit slightly weaker-algorithmic version of a classical result by Danzer that such a set $\mathcal{D}$ can always be stabbed by four points.

cs.CG↗
arXiv2020

Time-Space Trade-Offs for Computing Euclidean Minimum Spanning Trees

We present time-space trade-offs for computing the Euclidean minimum spanning tree of a set $S$ of $n$ point-sites in the plane. More precisely, we assume that $S$ resides in a random-access memory that can only be read. The edges of the Euclidean minimum spanning tree $\text{EMST}(S)$ have to be reported sequentially, and they cannot be accessed or modified afterwards. There is a parameter $s \in \{1, \dots, n\}$ so that the algorithm may use $O(s)$ cells of read-write memory (called the workspace) for its computations. Our goal is to find an algorithm that has the best possible running time for any given $s$ between $1$ and $n$. We show how to compute $\text{EMST}(S)$ in $O\big((n^3/s^2)\log s \big)$ time with $O(s)$ cells of workspace, giving a smooth trade-off between the two best known bounds $O(n^3)$ for $s = 1$ and $O(n \log n)$ for $s = n$. For this, we run Kruskal's algorithm on the relative neighborhood graph (RNG) of $S$. It is a classic fact that the minimum spanning tree of $\text{RNG}(S)$ is exactly $\text{EMST}(S)$. To implement Kruskal's algorithm with $O(s)$ cells of workspace, we define $s$-nets, a compact representation of planar graphs. This allows us to efficiently maintain and update the components of the current minimum spanning forest as the edges are being inserted.

cs.CG↗
arXiv2020

Minimal Representations of Order Types by Geometric Graphs

In order to have a compact visualization of the order type of a given point set S, we are interested in geometric graphs on S with few edges that unambiguously display the order type of S. We introduce the concept of exit edges, which prevent the order type from changing under continuous motion of vertices. That is, in the geometric graph on S whose edges are the exit edges, in order to change the order type of S, at least one vertex needs to move across an exit edge. Exit edges have a natural dual characterization, which allows us to efficiently compute them and to bound their number.

math.CO↗