arXiv subjects

William Talbot

Publications and source records attributed to William Talbot.

11 recordsLinked to original sources

arXiv2026

RESPLE2: Inertial-Informed Recursive Non-Uniform Spline Estimation for Multi-Sensor Odometry with Global Refinement

We present RESPLE2, a recursive multi-sensor state estimation framework using non-uniform B-splines for 6-DoF motion representation. By exploiting the knot-clamping boundary property, we propose a theoretically grounded mechanism for exact control-point prediction directly informed by inertial kinematics along the trajectory, with knot placement adapted to motion and measurement availability. Within an iterated extended Kalman filter, we perform this prediction using a subset of inertial measurements. A subsequent reset step preserves trajectory consistency as the knots extend. The update step further incorporates heterogeneous sensor measurements at their native timestamps through continuous-time observation models, supporting flexible combinations of LiDARs, cameras, inertial measurement units, and leg kinematics. We further develop a lightweight global optimization module that directly refines non-uniform B-spline control points by incorporating loop-closure constraints derived from LiDAR-visual cues. We conduct extensive evaluations on public and experimental datasets across handheld, tracked, legged, and hybrid aerial-legged platforms, covering highly dynamic maneuvers with extreme accelerations. Compared with state-of-the-art multi-sensor odometry systems, RESPLE2 achieves competitive or superior estimation accuracy and robustness in the corresponding sensor configurations, particularly under aggressive motion, while maintaining real-time operation. We publicly release our code and experimental datasets at https://github.com/ASIG-X/RESPLE2.

cs.RO↗

arXiv2026

Toward Lunar Legged Robots: Field Deployment Lessons at LUNA

Legged robots are promising candidates for future lunar surface missions because they can traverse steep, loose, and obstacle-rich terrain that challenges conventional wheeled rovers. However, readiness for lunar deployment is limited by uncertainties in foot-regolith interaction, dust generation, illumination-driven perception degradation, and operational constraints. This paper reports lessons from the 2025 LUNA analogue campaign, where ANYmal-D and Magnecko traversed loose regolith simulant and crater-like terrain and collected long-horizon navigation and visual-inertial data under challenging lighting. We show that quadrupedal robots can traverse regolith simulant, but performance is affected by sinkage and slip, dust-generating contacts, and perception failures caused by overexposure, shadows, and low-texture regions. These results motivate tighter integration of regolith-aware locomotion policies, illumination-robust perception, repeatable analogue testing, and mission-level operational validation for future lunar legged robots.

cs.RO↗

arXiv2026

Transformer-based Monte Carlo Localization in Construction Meshes

To be able to perform inspection or digitization tasks, mobile robots on construction sites must be able to localize themselves reliably with respect to a global reference frame that is shared with a building map. Similar room layouts and low-texture surfaces pose a challenge for existing LiDAR- and vision-based localization methods. We approach this problem with a LiDAR-based global relocalization system that estimates the robot's pose relative to a building mesh and combines a PointNet++ encoder with a place recognition decoder, whose outputs serve as a learned observation model within a Monte Carlo Localization (MCL) framework. The pipeline is trained exclusively on synthetic LiDAR scans obtained by simulating the robot's sensors inside the building mesh. Our approach is robust in ambiguous environments due to an uncertainty-aware decoder that scales positional likelihoods and a resampling strategy that injects model hypotheses into the particle set, enabling recovery from potential particle depletion. Evaluations on real-world datasets show that our method outperforms both diffusion-based and ScanContext++ baselines while maintaining fast inference (18 ms per call), demonstrating the practicality of synthetic-data training for mesh-referenced global localization in construction robotics.

cs.RO↗

arXiv2026

TRaIL-Odom: Tightly Coupled Continuous Time Radar-IMU-LiDAR Odometry with Adaptive Doppler Weighting

Existing radar-LiDAR fusion methods rely on fixed residual weights, even though the informativeness of radar Doppler and LiDAR geometry is scan- and direction-dependent, leading to uniform radar weighting that misallocates Doppler information across translational directions. To address this limitation, we propose two degeneracy-aware Doppler reweighting modules within a tightly coupled Radar-IMU-LiDAR odometry framework: per-point radar reweighting and scan-wise radar gain scheduling. Since geometric degeneracy is directional, we first identify weak translational directions from the LiDAR geometry and reweight individual radar Doppler constraints based on their alignment with the weak subspace. We further adjust the overall radar contribution using LiDAR geometric anisotropy such that radar is emphasized when LiDAR observability is poor and suppressed when LiDAR constraints are already reliable. Across 13 evaluated sequences, TRaIL-Odom achieves state-of-the-art overall performance, with clear advantages in geometrically degenerate scenes. In ablation experiments on three degenerate sequences, combining the two adaptive weighting modules reduces RMSE ATE and RTE by 86.0% and 78.5% relative to the fixed-weight baseline. We make our code and an accompanying dataset publicly available at https://github.com/ChiyunNoh/TRaIL-Odom.

cs.RO↗

arXiv2026

MOSAIC: Modular Scalable Autonomy for Intelligent Coordination of Heterogeneous Robotic Teams

Mobile robots have become indispensable for exploring hostile environments, such as in space or disaster relief scenarios, but often remain limited to teleoperation by a human operator. This restricts the deployment scale and requires near-continuous low-latency communication between the operator and the robot. We present MOSAIC: a scalable autonomy framework for multi-robot scientific exploration using a unified mission abstraction based on Points of Interest (POIs) and multiple layers of autonomy, enabling supervision by a single operator. The framework dynamically allocates exploration and measurement tasks based on each robot's capabilities, leveraging team-level redundancy and specialization to enable continuous operation. We validated the framework in a space-analog field experiment emulating a lunar prospecting scenario, involving a heterogeneous team of five robots and a single operator. Despite the complete failure of one robot during the mission, the team completed 82.3% of assigned tasks at an Autonomy Ratio of 86%, while the operator workload remained at only 78.2%. These results demonstrate that the proposed framework enables robust, scalable multi-robot scientific exploration with limited operator intervention. We further derive practical lessons learned in robot interoperability, networking architecture, team composition, and operator workload management to inform future multi-robot exploration missions.

cs.RO↗

arXiv2026

A Practical Framework of Key Performance Indicators for Multi-Robot Lunar and Planetary Field Tests

Robotic prospecting for critical resources on the Moon, such as ilmenite, rare earth elements, and water ice, requires robust exploration methods given the diverse terrain and harsh environmental conditions. Although numerous analog field trials address these goals, comparing their results remains challenging because of differences in robot platforms and experimental setups. These missions typically assess performance using selected, scenario-specific engineering metrics that fail to establish a clear link between field performance and science-driven objectives. In this paper, we address this gap by deriving a structured framework of KPI from three realistic multi-robot lunar scenarios reflecting scientific objectives and operational constraints. Our framework emphasizes scenario-dependent priorities in efficiency, robustness, and precision, and is explicitly designed for practical applicability in field deployments. We validated the framework in a multi-robot field test and found it practical and easy to apply for efficiency- and robustness-related KPI, whereas precision-oriented KPI require reliable ground-truth data that is not always feasible to obtain in outdoor analog environments. Overall, we propose this framework as a common evaluation standard enabling consistent, goal-oriented comparison of multi-robot field trials and supporting systematic development of robotic systems for future planetary exploration.

cs.RO↗

arXiv2026

CaRLi-V: Camera-RADAR-LiDAR Point-Wise 3D Velocity Estimation

Accurate point-wise velocity estimation in 3D is crucial for robot interaction with non-rigid dynamic agents, enabling robust performance in path planning, collision avoidance, and object manipulation in dynamic environments. To this end, this paper proposes a novel RADAR, LiDAR, and camera fusion pipeline for point-wise 3D velocity estimation named CaRLi-V. This pipeline leverages raw RADAR measurements to create a novel RADAR representation, the velocity cube, which densely encodes RADAR radial velocities. By combining the velocity cube for radial velocity extraction, optical flow for tangential velocity estimation, and LiDAR for point-wise range measurements through a closed-form solution, our approach can produce 3D velocity estimates for a dense array of points. Developed as an open-source ROS2 package, CaRLi-V has been field-tested on a custom dataset and achieves low velocity error metrics relative to ground truth while outperforming state-of-the-art scene flow methods.

cs.RO↗

arXiv2026

One-Shot Badminton Shuttle Detection for Mobile Robots

This paper presents a robust one-shot badminton shuttlecock detection framework for non-stationary robots. To address the lack of egocentric shuttlecock detection datasets, we introduce a dataset of 20,510 semi-automatically annotated frames captured across 11 distinct backgrounds in diverse indoor and outdoor environments, and categorize each frame into one of three difficulty levels. For labeling, we present a novel semi-automatic annotation pipeline, that enables efficient labeling from stationary camera footage. We propose a metric suited to our downstream use case and fine-tune a YOLOv8 network optimized for real-time shuttlecock detection, achieving an F1-score of 0.86 under our metric in test environments similar to training, and 0.70 in entirely unseen environments. Our analysis reveals that detection performance is critically dependent on shuttlecock size and background texture complexity. Qualitative experiments confirm their applicability to robots with moving cameras. Unlike prior work with stationary camera setups, our detector is specifically designed for the egocentric, dynamic viewpoints of mobile robots, providing a foundational building block for downstream tasks, including tracking, trajectory estimation, and system (re)-initialization.

cs.CV↗

arXiv2025

RESPLE: Recursive Spline Estimation for LiDAR-Based Odometry

We present a novel recursive Bayesian estimation framework using B-splines for continuous-time 6-DoF dynamic motion estimation. The state vector consists of a recurrent set of position control points and orientation control point increments, enabling efficient estimation via a modified iterated extended Kalman filter without involving error-state formulations. The resulting recursive spline estimator (RESPLE) is further leveraged to develop a versatile suite of direct LiDAR-based odometry solutions, supporting the integration of one or multiple LiDARs and an IMU. We conduct extensive real-world evaluations using public datasets and our own experiments, covering diverse sensor setups, platforms, and environments. Compared to existing systems, RESPLE achieves comparable or superior estimation accuracy and robustness, while attaining real-time efficiency. Our results and analysis demonstrate RESPLE's strength in handling highly dynamic motions and complex scenes within a lightweight and flexible design, showing strong potential as a universal framework for multi-sensor motion estimation. We release the source code and experimental datasets at https://github.com/ASIG-X/RESPLE .

cs.RO↗

arXiv2025

A Third-Order Gaussian Process Trajectory Representation Framework with Closed-Form Kinematics for Continuous-Time Motion Estimation

In this paper, we propose a third-order, i.e., white-noise-on-jerk, Gaussian Process (GP) Trajectory Representation (TR) framework for continuous-time (CT) motion estimation (ME) tasks. Our framework features a unified trajectory representation that encapsulates the kinematic models of both $SO(3)\times\mathbb{R}^3$ and $SE(3)$ pose representations. This encapsulation strategy allows users to use the same implementation of measurement-based factors for either choice of pose representation, which facilitates experimentation and comparison to achieve the best model for the ME task. In addition, unique to our framework, we derive the kinematic models with the closed-form temporal derivatives of the local variable of $SO(3)$ and $SE(3)$, which so far has only been approximated based on the Taylor expansion in the literature. Our experiments show that these kinematic models can improve the estimation accuracy in high-speed scenarios. All analytical Jacobians of the interpolated states with respect to the support states of the trajectory representation, as well as the motion prior factors, are also provided for accelerated Gauss-Newton (GN) optimization. Our experiments demonstrate the efficacy and efficiency of the framework in various motion estimation tasks such as localization, calibration, and odometry, facilitating fast prototyping for ME researchers. We release the source code for the benefit of the community. Our project is available at https://github.com/brytsknguyen/gptr.

cs.RO↗

arXiv2025

Continuous-Time State Estimation Methods in Robotics: A Survey

Accurate, efficient, and robust state estimation is more important than ever in robotics as the variety of platforms and complexity of tasks continue to grow. Historically, discrete-time filters and smoothers have been the dominant approach, in which the estimated variables are states at discrete sample times. The paradigm of continuous-time state estimation proposes an alternative strategy by estimating variables that express the state as a continuous function of time, which can be evaluated at any query time. Not only can this benefit downstream tasks such as planning and control, but it also significantly increases estimator performance and flexibility, as well as reduces sensor preprocessing and interfacing complexity. Despite this, continuous-time methods remain underutilized, potentially because they are less well-known within robotics. To remedy this, this work presents a unifying formulation of these methods and the most exhaustive literature review to date, systematically categorizing prior work by methodology, application, state variables, historical context, and theoretical contribution to the field. By surveying splines and Gaussian processes together and contextualizing works from other research domains, this work identifies and analyzes open problems in continuous-time state estimation and suggests new research directions.

cs.RO↗