arXiv subjects

Wenting Wang

Publications and source records attributed to Wenting Wang.

At least 55 records · Page 3Linked to original sources

arXiv2024

How does the velocity anisotropy of halo stars, dark matter and satellite galaxies depend on host halo properties?

We investigate the mass ($M_{200}$) and concentration ($c_{200}$) dependencies of the velocity anisotropy ($β$) profiles for different components in the dark matter halo, including halo stars, dark matter and subhalos, using systems from the IllustrisTNG simulations. Beyond a critical radius, $β$ becomes more radial with the increase of $M_{200}$, reflecting more prominent radial accretion around massive halos. The critical radius is $r\sim r_s$, $0.3~r_s$ and $r_s$ for halo stars, dark matter and subhalos, with $r_s$ the scale radius of host halos. This dependence on $M_{200}$ is the strongest for subhalos, and the weakest for halo stars. In central regions, $β$ of halo stars and dark matter particles gets more isotropic with the increase of $M_{200}$ in TNG300 due to baryons. By contrast, $β$ of dark matter from the dark matter only TNG300-Dark run shows much weaker dependence on $M_{200}$ within $r_s$. Dark matter in TNG300 is slightly more isotropic than in TNG300-Dark at $0.2~r_s r_s$ as $β_\mathrm{star}-β_\mathrm{DM}=(-0.028 \pm 0.008)\log_{10}M_{200}/M_\odot + (0.690\pm0.010)$.

astro-ph.GA↗

arXiv2024

Inferring the mass content of galaxy clusters with satellite kinematics and Jeans Anisotropic modeling

Satellite galaxies can be used to indicate the dynamical mass of galaxy groups and clusters. In this study, we apply the axis-symmetric Jeans Anisotropic Multi-Gaussian Expansion JAM modeling to satellite galaxies in 28 galaxy clusters selected from the TNG300-1 simulation with halo mass of $\log_{10}M_{200}/M_\odot>14.3$. If using true bound satellites as tracers, the best constrained total mass within the half-mass radius of satellites, $M(<r_\mathrm{half})$, and the virial mass, $M_{200}$, have average biases of -0.01 and $0.03$~dex, with average scatters of 0.11~dex and 0.15~dex. If selecting companions in redshift space with line-of-sight depth of 2,000~km/s, the biases are -0.06 and $0.01$~dex, while the scatters are 0.12 and 0.18~dex for $M(<r_\mathrm{half})$ and $M_{200}$. By comparing the best-fitting and actual density profiles, we find $\sim$29% of best-fitting density profiles show very good agreement with the truth, $\sim$32% display over or under estimates at most of the radial range with biased $M(<r_\mathrm{half})$, and 39% show under/over estimates in central regions and over/under estimates in the outskirts, with good constraints on $M(<r_\mathrm{half})$, yet most of the best constraints are still consistent with the true profiles within 1-$σ$ statistical uncertainties for the three circumstances. Using a mock DESI Bright Galaxy Survey catalog with the effect of fiber incompleteness, we find DESI fiber assignments and the choice of flux limits barely modify the velocity dispersion profiles and are thus unlikely to affect the dynamical modeling outcomes. Our results show that with current and future deep spectroscopic surveys, JAM can be a powerful tool to constrain the underlying density profiles of individual massive galaxy clusters.

astro-ph.CO↗

arXiv2024

Spatio-temporal breather dynamics in microcomb soliton crystals

Solitons, the distinct balance between nonlinearity and dispersion, provide a route toward ultrafast electromagnetic pulse shaping, high-harmonic generation, real-time image processing, and RF photonic communications. Here we newly explore and observe the spatio-temporal breather dynamics of optical soliton crystals in frequency microcombs, examining spatial breathers, chaos transitions, and dynamical deterministic switching in nonlinear measurements and theory. To understand the breather solitons, we describe their dynamical routes and two example transitional maps of the ensemble spatial breathers, with and without chaos initiation. We elucidate the physical mechanisms of the breather dynamics in the soliton crystal microcombs, in the interaction plane limit cycles and in the domain-wall understanding with parity symmetry breaking from third order dispersion. We present maps of the accessible nonlinear regions, the breather frequency dependences on third order dispersion and avoided mode crossing strengths, and the transition between the collective breather spatiotemporal states. Our range of measurements matches well with our first-principles theory and nonlinear modeling. To image these soliton ensembles and their breathers, we further constructed panoramic temporal imaging for simultaneous fast and slow axis two dimensional mapping of the breathers. In the phase differential sampling, we present two dimensional evolution maps of soliton crystal breathers, including with defects, in both stable breathers and breathers with drift. Our fundamental studies contribute to the understanding of nonlinear dynamics in soliton crystal complexes, their spatiotemporal dependences, and their stability-existence zones.

nlin.PS↗

arXiv2024

Free-SurGS: SfM-Free 3D Gaussian Splatting for Surgical Scene Reconstruction

Real-time 3D reconstruction of surgical scenes plays a vital role in computer-assisted surgery, holding a promise to enhance surgeons' visibility. Recent advancements in 3D Gaussian Splatting (3DGS) have shown great potential for real-time novel view synthesis of general scenes, which relies on accurate poses and point clouds generated by Structure-from-Motion (SfM) for initialization. However, 3DGS with SfM fails to recover accurate camera poses and geometry in surgical scenes due to the challenges of minimal textures and photometric inconsistencies. To tackle this problem, in this paper, we propose the first SfM-free 3DGS-based method for surgical scene reconstruction by jointly optimizing the camera poses and scene representation. Based on the video continuity, the key of our method is to exploit the immediate optical flow priors to guide the projection flow derived from 3D Gaussians. Unlike most previous methods relying on photometric loss only, we formulate the pose estimation problem as minimizing the flow loss between the projection flow and optical flow. A consistency check is further introduced to filter the flow outliers by detecting the rigid and reliable points that satisfy the epipolar geometry. During 3D Gaussian optimization, we randomly sample frames to optimize the scene representations to grow the 3D Gaussian progressively. Experiments on the SCARED dataset demonstrate our superior performance over existing methods in novel view synthesis and pose estimation with high efficiency. Code is available at https://github.com/wrld/Free-SurGS.

cs.CV↗

arXiv2024

Accurate Shear Recovery with Multi-Band Images of Hyper Suprime-Cam

The existing large scale weak lensing surveys typically reserve the best seeing conditions for a certain optical band to minimize shape measurement errors and maximize the number of usable background galaxies. This is because most popular shear measurement methods contain explicit or implicit thresholds on the galaxy-to-PSF (point spread function) size ratio, below which their shape measurement errors increase abruptly. Using the DECaLS data, we have previously demonstrated that the Fourier\_Quad method performs very well on poorly resolved galaxy images in general. It is therefore a ready tool for shear measurement with multi-band images regardless of their seeing conditions. In this paper, we apply the Fourier\_Quad pipeline on the multi-band images from the third public data release of the Hyper Suprime-Cam Subaru Strategic Program. We show that the shear catalogs from the five optical bands (g/r/i/z/y) all pass the field-distortion test with very high accuracy. Using the LOWZ and CMASS galaxies as foreground lenses, we show that the errorbar in the galaxy-galaxy lensing measurement can be decreased by factors around 15\% by combining shear catalogs from different bands. This indicates that it is worthful to do multi-bands shear measurements for a better shear statistics.

astro-ph.CO↗

arXiv2024

CSST large-scale structure analysis pipeline: I. constructing reference mock galaxy redshift surveys

In this paper, we set out to construct a set of reference mock galaxy redshift surveys (MGRSs) for the future Chinese Space-station Survey Telescope (CSST) observation, where subsequent survey selection effects can be added and evaluated. This set of MGRSs is generated using the dark matter subhalos extracted from a high-resolution Jiutian $N$-body simulation of the standard $Λ$CDM cosmogony with $Ω_m=0.3111$, $Ω_Λ=0.6889$, and $σ_8=0.8102$. The simulation has a boxsize of $1~h^{-1} {\rm Gpc}$, and consists of $6144^3$ particles with mass resolution $3.723 \times 10^{8} h^{-1} M_\odot $. In order to take into account the effect of redshift evolution, we first use all 128 snapshots in the Jiutian simulation to generate a light-cone halo/subhalo catalog. Next, galaxy luminosities are assigned to the main and subhalo populations using the subhalo abundance matching (SHAM) method with the DESI $z$-band luminosity functions at different redshifts. Multi-band photometries, as well as images, are then assigned to each mock galaxy using a 3-dimensional parameter space nearest neighbor sampling of the DESI LS observational galaxies and groups. Finally, the CSST and DESI LS survey geometry and magnitude limit cuts are applied to generate the required MGRSs. As we have checked, this set of MGRSs can generally reproduce the observed galaxy luminosity/mass functions within 0.1 dex for galaxies with $L > 10^8 L_\odot$ (or $M_* > 10^{8.5} M_\odot$) and within 1-$σ$ level for galaxies with $L < 10^8L_\odot$ (or $M_* < 10^{8.5} M_\odot$). Together with the CSST slitless spectra and redshifts for our DESI LS seed galaxies that are under construction, we will set out to test various slitless observational selection effects in subsequent probes.

astro-ph.GA↗

arXiv2024

A younger Universe implied by satellite pair correlations from SDSS observations of massive galaxy groups

Many of the satellites of galactic-mass systems such as the Miky Way, Andromeda and Centaurus A show evidence of coherent motions to a larger extent than most of the systems predicted by the standard cosmological model. It is an open question if correlations in satellite orbits are present in systems of different masses. Here , we report an analysis of the kinematics of satellite galaxies around massive galaxy groups. Unlike what is seen in Milky Way analogues, we find an excess of diametrically opposed pairs of satellites that have line-of-sight velocity offsets from the central galaxy of the same sign. This corresponds to a $\pmb{6.0σ}$ ($\pmb{p}$-value $\pmb{=\ 9.9\times10^{-10}}$) detection of non-random satellite motions. Such excess is predicted by up-to-date cosmological simulations but the magnitude of the effect is considerably lower than in observations. The observational data is discrepant at the $\pmb{4.1σ}$ and $\pmb{3.6σ}$ level with the expectations of the Millennium and the Illustris TNG300 cosmological simulations, potentially indicating that massive galaxy groups assembled later in the real Universe. The detection of velocity correlations of satellite galaxies and tension with theoretical predictions is robust against changes in sample selection. Using the largest sample to date, our findings demonstrate that the motions of satellite galaxies represent a challenge to the current cosmological model.

astro-ph.GA↗

arXiv2023

Using two point correlation functions to understand the assembly histories of Milky Way-like galaxies

The two point correlation function (2PCF) is a powerful statistical tool to measure galaxy clustering. Although 2PCF has also been used to study the clustering of stars on parsec and sub-parsec scales, its physical implication is not clear on such non-linear scales. In this study, we use the Illustris-TNG50 simulation to study the connection between the 2PCF signals of accreted halo stars and the assembly histories of Milky Way-mass galaxies. We find, in general, the 2PCF signal increases with the increase in galactocentric radii, $r$, and with the decrease in the pair separations. Galaxies which assemble late on average have stronger 2PCF signals. With $z_{1/4}$, $z_{1/2}$ and $z_{3/4}$ defined as the redshifts when galaxies accreted one-fourth, half and three-fourths of their ex-situ stellar mass at today, we find all of them show the strongest correlations with the 2PCF signals at $r\sim0.2R_{200}$. $z_{3/4}$ shows the strongest correlations at all radii than those of $z_{1/4}$ or $z_{1/2}$, as later accreted stars preserve better clusterings. However, the correlations between the 2PCF signals at different radii and the galaxy formation times all have large scatters. The 2PCFs in velocity space show weaker correlations with the galaxy formation times within $0.38R_{200}$ than real space 2PCFs, and the scatter is considerably large. Both the real and velocity space 2PCFs correlate with the assembly histories of the host dark matter halos as well. Within $0.38R_{200}$, the real space 2PCF shows stronger correlations with the galaxy formation histories than with the halo formation histories, while the velocity space 2PCFs do not show large differences. We conclude that it is difficult to use 2PCF alone to precisely predict the formation times or assembly histories of galaxies.

astro-ph.GA↗

arXiv2023

Unraveling the Complexity of Dwarf Galaxy Dynamics: A study of Binary Orbital Motions

We investigate the impact of binary orbital motions on the dynamical modeling of dwarf galaxies with intrinsic line-of-sight velocity dispersions ($σ_{v_r}$) of 1 to 9 km/s. Using dwarf galaxies from the Auriga level-2 and level-3 simulations, we apply the Jeans Anisotropic Multi-Gaussian Expansion modelling to tracer stars before and after including binaries to recover the dynamical masses. The recovered total masses within the half-mass radius of tracers, $M(<r_\mathrm{half})$, are always inflated due to binary motions, with greater inflations occurring for smaller $σ_{v_r}$. However, many dwarf galaxies experience central density deflated due to binary motions, with little dependences on $σ_{v_r}$. This is due to the negative radial gradients in the velocity dispersion profiles, with the fractional inflation in $σ_{v_r}$ due to binaries more significant in outskirts. An extreme binary fraction of 70% can lead to central density deflation of up to 10-20% at 3 km/s$<σ_{v_r}<$8 km/s, with $M(<r_\mathrm{half})$ inflated by 4% at 9 km/s and up to 15% at 3 km/s. A lower binary fraction of 36% leads to similar deflations, with the inflations decreasing to approximately 10% at 3 km/s and becoming statistically insignificant. The choice of binary orbit distribution models does not result in significant differences, and observational errors tend to slightly weaken the deflations in the recovered central density. Two observations separated by one year to exclude binaries lead to almost zero inflations/deflations for a binary fraction of 36% over 3 km/s$<σ_{v_r}<$9 km/s. For $σ_{v_r}\sim$1 km/s to 3 km/s, a binary fraction of 70% (36%) still results in 60% (30%) to 10% (1%) of inflations in $M(<r_\mathrm{half})$, even with two-epoch observation.

astro-ph.GA↗

arXiv2023

Blind Search of The Solar Neighborhood Galactic Disk within 5kpc: 1,179 new Star clusters found in Gaia DR3

Studying open clusters (OCs) is essential for a comprehensive understanding of the structure and evolution of the Milky Way. Many previous studies have systematically searched for OCs near the solar system within 1.2 kpc or 20 degrees of galactic latitude. However, few studies searched for OCs at higher galactic latitudes and deeper distances. In this study, based on a hybrid unsupervised clustering algorithm (Friends-of-Friends and pyUPMASK) and a binary classification algorithm (Random Forest), we extended the search region (i.e., galactic latitude |b|>=20 degrees) and performed a fine-grained blind search of Galactic clusters in Gaia DR3. After cross-matching, the newly discovered cluster candidates are fitted using isochrone fitting to estimate the main physical parameters (age and metallicity) of these clusters. These cluster candidates were then checked using manual visual inspection. Their statistical properties were compared with previously exposed cluster catalogs as well. In the end, we found 1,179 new clusters with considerable confidence within 5kpc.

astro-ph.GA↗

arXiv2023

Polarization-diverse soliton transitions and deterministic switching dynamics in strongly-coupled and self-stabilized microresonator frequency combs

Dissipative Kerr soliton microcombs in microresonators has enabled fundamental advances in chip scale precision metrology, communication, spectroscopy, and parallel signal processing. Here we demonstrate polarization diverse soliton transitions and deterministic switching dynamics of a self stabilized microcomb in a strongly coupled dispersion-managed microresonator driven with a single pump laser. The switching dynamics are induced by the differential thermorefractivity between coupled transverse magnetic and transverse electric supermodes during the forward backward pump detunings. The achieved large soliton existence range and deterministic transitions benefit from the switching dynamics, leading to the cross polarized soliton microcomb formation when driven in the transverse magnetic supermode of the single resonator. Resultantly the pump laser always exists at the effective blue detuning of the transverse magnetic resonance, fundamentally mitigating the thermal destabilization barrier and improving accessibility of the soliton formation regime. Subsequently and secondly, we demonstrate two distinct polarization diverse soliton formation routes arising from chaotic or periodically modulated waveforms via pump power selection. The generated self stabilized supermode microcomb features an extraordinarily large soliton existence range, a variety of soliton state transitions with well defined pump laser tuning, high pump microcomb conversion efficiency, and low repetition rate phase noise.

physics.optics↗

arXiv2023

Dark against luminous matter around isolated central galaxies: a comparative study between modern surveys and Illustris-TNG

Based on independent shear measurements using the DECaLS/DR8 imaging data, we measure the weak lensing signals around isolated central galaxies (ICGs) from SDSS/DR7 at $z\sim0.1$. The projected stellar mass density profiles of surrounding satellite galaxies are further deduced, using photometric sources from the Hyper Suprime-Cam (HSC) survey (pDR3). The signals of ICGs $+$ their extended stellar halos are taken from Wang et al.(2021). All measurements are compared with predictions by the Illustris-TNG300-1 simulation. We find, overall, a good agreement between observation and TNG300. In particular, a correction to the stellar mass of massive observed ICGs is applied based on the calibration of He et al.(2013), which brings a much better agreement with TNG300 predicted lensing signals at $\log_{10}M_\ast/M_\odot>11.1$. In real observation, red ICGs are hosted by more massive dark matter halos, have more satellites and more extended stellar halos than blue ICGs at fixed stellar mass. However, in TNG300 there are more satellites around blue ICGs at fixed stellar mass, and the outer stellar halos of red and blue ICGs are similar. The stellar halos of TNG galaxies are more extended compared with real observed galaxies, especially for blue ICGs with $\log_{10}M_\ast/M_\odot>10.8$. We find the same trend for TNG100 galaxies and for true halo central galaxies. The tensions between TNG and real galaxies might indicate that satellite disruptions are stronger in TNG. In both TNG300 and observation, satellites approximately trace the underlying dark matter distribution beyond $0.1R_{200}$, but the fraction of total stellar mass in TNG300 does not show the same radial distribution as real galaxies.

astro-ph.GA↗

arXiv2023

Overview of the DESI Milky Way Survey

We describe the Milky Way Survey (MWS) that will be undertaken with the Dark Energy Spectroscopic Instrument (DESI) on the Mayall 4m telescope at the Kitt Peak National Observatory. Over the next 5 yr DESI MWS will observe approximately seven million stars at Galactic latitudes |b|>20 degrees, with an inclusive target selection scheme focused on the thick disk and stellar halo. MWS will also include several high-completeness samples of rare stellar types, including white dwarfs, low-mass stars within 100pc of the Sun, and horizontal branch stars. We summarize the potential of DESI to advance understanding of Galactic structure and stellar evolution. We introduce the final definitions of the main MWS target classes and estimate the number of stars in each class that will be observed. We describe our pipelines for deriving radial velocities, atmospheric parameters, and chemical abundances. We use ~500,000 spectra of unique stellar targets from the DESI Survey Validation program (SV) to demonstrate that our pipelines can measure radial velocities to ~1 km/s and [Fe/H] accurate to ~0.2 dex for typical stars in our main sample. We find the stellar parameter distributions from ~100 sq. deg of SV observations with >90% completeness on our main sample are in good agreement with expectations from mock catalogs and previous surveys.

astro-ph.GA↗

arXiv2022

The halo concentration and mass relation traced by satellite galaxies

We study the relation between halo concentration and mass (c-M relation) using the Seventh and Eighth Data Release of the Sloan Digital Sky Survey (SDSS DR7 and DR8) galaxy catalogue. Assuming that the satellite galaxies follow the distribution of dark matter, we derive the halo concentration by fitting the satellite radial profile with a Nararro Frank and White (NFW) format. The derived c-M relation covers a wide halo mass range from $10^{11.6}$ to $10^{14.1} \rm\ M_\odot$. We confirm the anti-correlation between the halo mass and concentration as predicted in cosmological simulations. Our results are in good agreement with those derived using galaxy dynamics and gravitational lensing for halos of $10^{11.6}-10^{12.9} \rm\ M_\odot$, while they are slightly lower for halos of $10^{12.9}-10^{14.1}\rm\ M_\odot$. It is because blue satellite galaxies are less concentrated, especially in the inner regions. Instead of using all satellite galaxies, red satellites could be better tracers of the underlying dark matter distribution in galaxy groups.

astro-ph.GA↗

arXiv2022

Is the core-cusp problem a matter of perspective: Jeans Anisotropic Modeling against numerical simulations

Mock member stars for 28 dwarf galaxies are constructed from the cosmological Auriga simulation, which reflect the dynamical status of realistic stellar tracers. The axis-symmetric Jeans Anisotropic Multi-Gaussian Expansion (JAM) modeling is applied to 6,000 star particles for each system, to recover the underlying matter distribution. The stellar or dark matter component individually is poorly recovered, but the total profile is constrained more reasonably. The mass within the half-mass radius of tracers is recovered the tightest, and the mass between 200 and 300 pc, $M(200-300\mathrm{pc})$, is constrained ensemble unbiasedly, with a scatter of 0.167 dex. If using 2,000 particles and only line-of-sight velocities with typical errors, the scatter in $M(200-300\mathrm{pc})$ is increased by $\sim$50%. Quiescent Sagittarius dSph-like systems and star-forming systems with strong outflows show distinct features, with $M(200-300\mathrm{pc})$ mostly under-estimated for the former, and likely over-estimated for the latter. The biases correlate with the dynamical status, which is a result of contraction motions due to tidal effects in quiescent systems or galactic winds in star-forming systems, driving them out of equilibrium. After including Gaia DR3 proper motion errors, we find proper motions can be as useful as line-of-sight velocities for nearby systems at $<\sim$60 kpc. By extrapolating the actual density profiles and the dynamical constraints down to scales below the resolution, we find the mass within 150 pc can be constrained ensemble unbiasedly, with a scatter of $\sim$0.255 dex. In the end, we show that the contraction of member stars in nearby systems is detectable based on Gaia DR3 proper motion errors.

astro-ph.GA↗

arXiv2022

Parametrically driven inertial sensing in chip-scale optomechanical cavities at the thermodynamical limits with extended dynamic range

Recent scientific and technological advances have enabled the detection of gravitational waves, autonomous driving, and the proposal of a communications network on the Moon (Lunar Internet or LunaNet). These efforts are based on the measurement of minute displacements and correspondingly the forces or fields transduction, which translate to acceleration, velocity, and position determination for navigation. State-of-the-art accelerometers use capacitive or piezo resistive techniques, and micro-electromechanical systems (MEMS) via integrated circuit (IC) technologies in order to drive the transducer and convert its output for electric readout. In recent years, laser optomechanical transduction and readout have enabled highly sensitive detection of motional displacement. Here we further examine the theoretical framework for the novel mechanical frequency readout technique of optomechanical transduction when the sensor is driven into oscillation mode [8]. We demonstrate theoretical and physical agreement and characterize the most relevant performance parameters with a device with 1.5mg/Hz acceleration sensitivity, a 2.5 fm/Hz1/2 displacement resolution corresponding to a 17.02 ug/Hz1/2 force-equivalent acceleration, and a 5.91 Hz/nW power sensitivity, at the thermodynamical limits. In addition, we present a novel technique for dynamic range extension while maintaining the precision sensing sensitivity. Our inertial accelerometer is integrated on-chip, and enabled for packaging, with a laser-detuning-enabled approach.

eess.SY↗

arXiv2022

LightEA: A Scalable, Robust, and Interpretable Entity Alignment Framework via Three-view Label Propagation

Entity Alignment (EA) aims to find equivalent entity pairs between KGs, which is the core step of bridging and integrating multi-source KGs. In this paper, we argue that existing GNN-based EA methods inherit the inborn defects from their neural network lineage: weak scalability and poor interpretability. Inspired by recent studies, we reinvent the Label Propagation algorithm to effectively run on KGs and propose a non-neural EA framework -- LightEA, consisting of three efficient components: (i) Random Orthogonal Label Generation, (ii) Three-view Label Propagation, and (iii) Sparse Sinkhorn Iteration. According to the extensive experiments on public datasets, LightEA has impressive scalability, robustness, and interpretability. With a mere tenth of time consumption, LightEA achieves comparable results to state-of-the-art methods across all datasets and even surpasses them on many.

cs.AI↗

arXiv2022

Spontaneous microwave platicon frequency microcomb in dispersion-managed microresonators

Temporally stabilized optical pules, confined in microresonators driven by a continuous-wave laser, have attracted tremendous attention due to their fascinating features with many applications. Here we report the observations of mode-locked platicon frequency microcomb formation in normal dispersion dispersion-managed microresonators operating at microwave K-band repetition rate for the first time. Facilitated by the thermally controllable modulated background induced by avoided mode-crossings, various platicon bound state patterns with regular and irregular temporal separation are stably generated due to an additional balance between repulsive and attractive forces resulting from non-trivial interpulse and background electromagnetic field interactions. The number of mode-locked pulses can be switched by forward- and backward-cavity pump detuning and, with increasing pump power, result in stationary bound-state complexes. These experimental observations are in accordance with our nonlinear numerical simulations that includes avoided mode-crossing, anomalous fourth-order dispersion and quality-factor spectral filtering. The observed platicon mode-locked pulses have broad spectral profiles overlapping Kelly-sideband-like parametric oscillation. The single-sideband phase noise of microcomb repetition rate is characterized for the different mode-locked states, comparable with electronic microwave oscillators. The ability to achieve mode-locking in dispersion-managed microresonators provides a platform to reduce pulse timing jitter and enrich the exploration of ultrafast phenomena in microresonators.

physics.optics↗