arXiv Science⌕ Search

arXiv subjects

Wenlong Zhang

Publications and source records attributed to Wenlong Zhang.

At least 145 records · Page 8Linked to original sources
arXiv2022

Configuration Tracking Control of a Multi-Segment Soft Robotic Arm Using a Cosserat Rod Model

Controlling soft continuum robotic arms is challenging due to their hyper-redundancy and dexterity. In this paper we demonstrate, for the first time, closed-loop control of the configuration space variables of a soft robotic arm, composed of independently controllable segments, using a Cosserat rod model of the robot and the distributed sensing and actuation capabilities of the segments. Our controller solves the inverse dynamic problem by simulating the Cosserat rod model in MATLAB using a computationally efficient numerical solution scheme, and it applies the computed control output to the actual robot in real time. The position and orientation of the tip of each segment are measured in real time, while the remaining unknown variables that are needed to solve the inverse dynamics are estimated simultaneously in the simulation. We implement the controller on a multi-segment silicone robotic arm with pneumatic actuation, using a motion capture system to measure the segments' positions and orientations. The controller is used to reshape the arm into configurations that are achieved through different combinations of bending and extension deformations in 3D space. The resulting tracking performance indicates the effectiveness of the controller and the accuracy of the simulated Cosserat rod model that is used to estimate the unmeasured variables.

cs.RO↗
arXiv2022

Invariant Extended Kalman Filtering for Human Motion Estimation with Imperfect Sensor Placement

This paper introduces a new invariant extended Kalman filter design that produces real-time state estimates and rapid error convergence for the estimation of the human body movement even in the presence of sensor misalignment and initial state estimation errors. The filter fuses the data returned by an inertial measurement unit (IMU) attached to the body (e.g., pelvis or chest) and a virtual measurement of zero stance-foot velocity (i.e., leg odometry). The key novelty of the proposed filter lies in that its process model meets the group affine property while the filter explicitly addresses the IMU placement error by formulating its stochastic process model as Brownian motions and incorporating the error in the leg odometry. Although the measurement model is imperfect (i.e., it does not possess an invariant observation form) and thus its linearization relies on the state estimate, experimental results demonstrate fast convergence of the proposed filter (within 0.2 seconds) during squatting motions even under significant IMU placement inaccuracy and initial estimation errors.

cs.RO↗
arXiv2022

Design and Evaluation of an Invariant Extended Kalman Filter for Trunk Motion Estimation with Sensor Misalignment

Understanding human motion is of critical importance for health monitoring and control of assistive robots, yet many human kinematic variables cannot be directly or accurately measured by wearable sensors. In recent years, invariant extended Kalman filtering (InEKF) has shown a great potential in nonlinear state estimation, but its applications to human poses new challenges, including imperfect placement of wearable sensors and inaccurate measurement models. To address these challenges, this paper proposes an augmented InEKF design which considers the misalignment of the inertial sensor at the trunk as part of the states and preserves the group affine property for the process model. Personalized lower-extremity forward kinematic models are built and employed as the measurement model for the augmented InEKF. Observability analysis for the new InEKF design is presented. The filter is evaluated with three subjects in squatting, rolling-foot walking, and ladder-climbing motions. Experimental results validate the superior performance of the proposed InEKF over the state-of-the-art InEKF. Improved accuracy and faster convergence in estimating the velocity and orientation of human, in all three motions, are achieved despite the significant initial estimation errors and the uncertainties associated with the forward kinematic measurement model.

cs.RO↗
arXiv2022

A Closer Look at Blind Super-Resolution: Degradation Models, Baselines, and Performance Upper Bounds

Degradation models play an important role in Blind super-resolution (SR). The classical degradation model, which mainly involves blur degradation, is too simple to simulate real-world scenarios. The recently proposed practical degradation model includes a full spectrum of degradation types, but only considers complex cases that use all degradation types in the degradation process, while ignoring many important corner cases that are common in the real world. To address this problem, we propose a unified gated degradation model to generate a broad set of degradation cases using a random gate controller. Based on the gated degradation model, we propose simple baseline networks that can effectively handle non-blind, classical, practical degradation cases as well as many other corner cases. To fairly evaluate the performance of our baseline networks against state-of-the-art methods and understand their limits, we introduce the performance upper bound of an SR network for every degradation type. Our empirical analysis shows that with the unified gated degradation model, the proposed baselines can achieve much better performance than existing methods in quantitative and qualitative results, which are close to the performance upper bounds.

eess.IV↗
arXiv2022

Probabilistic Consensus on Feature Distribution for Multi-robot Systems with Markovian Exploration Dynamics

In this paper, we present a consensus-based decentralized multi-robot approach to reconstruct a discrete distribution of features, modeled as an occupancy grid map, that represent information contained in a bounded planar 2D environment, such as visual cues used for navigation or semantic labels associated with object detection. The robots explore the environment according to a random walk modeled by a discrete-time discrete-state (DTDS) Markov chain and estimate the feature distribution from their own measurements and the estimates communicated by neighboring robots, using a distributed Chernoff fusion protocol. We prove that under this decentralized fusion protocol, each robot's feature distribution converges to the ground truth distribution in an almost sure sense. We verify this result in numerical simulations that show that the Hellinger distance between the estimated and ground truth feature distributions converges to zero over time for each robot. We also validate our strategy through Software-In-The-Loop (SITL) simulations of quadrotors that search a bounded square grid for a set of visual features distributed on a discretized circle.

cs.RO↗
arXiv2022

Event Detection Explorer: An Interactive Tool for Event Detection Exploration

Event Detection (ED) is an important task in natural language processing. In the past few years, many datasets have been introduced for advancing ED machine learning models. However, most of these datasets are under-explored because not many tools are available for people to study events, trigger words, and event mention instances systematically and efficiently. In this paper, we present an interactive and easy-to-use tool, namely ED Explorer, for ED dataset and model exploration. ED Explorer consists of an interactive web application, an API, and an NLP toolkit, which can help both domain experts and non-experts to better understand the ED task. We use ED Explorer to analyze a recent proposed large-scale ED datasets (referred to as MAVEN), and discover several underlying problems, including sparsity, label bias, label imbalance, and debatable annotations, which provide us with directions to improve the MAVEN dataset. The ED Explorer can be publicly accessed through http://edx.leafnlp.org/. The demonstration video is available here https://www.youtube.com/watch?v=6QPnxPwxg50.

cs.CL↗
arXiv2021

A globally convergent numerical method for a 3D coefficient inverse problem for a wave-like equation

A version of the convexification globally convergent numerical method is constructed for a coefficient inverse problem for a wave-like partial differential equation. The presence of the Carleman Weight Function in the corresponding Tikhonov-like cost functional ensures the global strict convexity of this functional. Numerical results are presented to illustrate the effectiveness and efficiency of the proposed method.

math.NA↗
arXiv2021

Overcoming Catastrophic Forgetting in Incremental Few-Shot Learning by Finding Flat Minima

This paper considers incremental few-shot learning, which requires a model to continually recognize new categories with only a few examples provided. Our study shows that existing methods severely suffer from catastrophic forgetting, a well-known problem in incremental learning, which is aggravated due to data scarcity and imbalance in the few-shot setting. Our analysis further suggests that to prevent catastrophic forgetting, actions need to be taken in the primitive stage -- the training of base classes instead of later few-shot learning sessions. Therefore, we propose to search for flat local minima of the base training objective function and then fine-tune the model parameters within the flat region on new tasks. In this way, the model can efficiently learn new classes while preserving the old ones. Comprehensive experimental results demonstrate that our approach outperforms all prior state-of-the-art methods and is very close to the approximate upper bound. The source code is available at https://github.com/moukamisama/F2M.

cs.LG↗
arXiv2021

Stochastic convergence of regularized solutions and their finite element approximations to inverse source problems

In this work, we investigate the regularized solutions and their finite element solutions to the inverse source problems governed by partial differential equations, and establish the stochastic convergence and optimal finite element convergence rates of these solutions, under pointwise measurement data with random noise. Unlike most existing regularization theories, the regularization error estimates are derived without any source conditions, while the error estimates of finite element solutions show their explicit dependence on the noise level, regularization parameter, mesh size, and time step size, which can guide practical choices among these key parameters in real applications. The error estimates also suggest an iterative algorithm for determining an optimal regularization parameter. Numerical experiments are presented to demonstrate the effectiveness of the analytical results.

math.NA↗
arXiv2021

A data-driven model reduction method for parabolic inverse source problems and its convergence analysis

In this paper, we propose a data-driven model reduction method to solve parabolic inverse source problems efficiently. Our method consists of offline and online stages. In the off-line stage, we explore the low-dimensional structures in the solution space of the parabolic partial differential equations (PDEs) in the forward problem with a given class of source functions and construct a small number of proper orthogonal decomposition (POD) basis functions to achieve significant dimension reduction. Equipped with the POD basis functions, we can solve the forward problem extremely fast in the online stage. Thus, we develop a fast algorithm to solve the optimization problem in the parabolic inverse source problems, which is referred to as the POD algorithm in this paper. Under a weak regularity assumption on the solution of the parabolic PDEs, we prove the convergence of the POD algorithm in solving the forward parabolic PDEs. In addition, we obtain the error estimate of the POD algorithm for parabolic inverse source problems. Finally, we present numerical examples to demonstrate the accuracy and efficiency of the proposed method. Our numerical results show that the POD algorithm provides considerable computational savings over the finite element method.

math.NA↗
arXiv2021

RankSRGAN: Super Resolution Generative Adversarial Networks with Learning to Rank

Generative Adversarial Networks (GAN) have demonstrated the potential to recover realistic details for single image super-resolution (SISR). To further improve the visual quality of super-resolved results, PIRM2018-SR Challenge employed perceptual metrics to assess the perceptual quality, such as PI, NIQE, and Ma. However, existing methods cannot directly optimize these indifferentiable perceptual metrics, which are shown to be highly correlated with human ratings. To address the problem, we propose Super-Resolution Generative Adversarial Networks with Ranker (RankSRGAN) to optimize generator in the direction of different perceptual metrics. Specifically, we first train a Ranker which can learn the behaviour of perceptual metrics and then introduce a novel rank-content loss to optimize the perceptual quality. The most appealing part is that the proposed method can combine the strengths of different SR methods to generate better results. Furthermore, we extend our method to multiple Rankers to provide multi-dimension constraints for the generator. Extensive experiments show that RankSRGAN achieves visually pleasing results and reaches state-of-the-art performance in perceptual metrics and quality. Project page: https://wenlongzhang0517.github.io/Projects/RankSRGAN

cs.CV↗
arXiv2021

Collision Recovery Control of a Foldable Quadrotor

Autonomous missions of small unmanned aerial vehicles (UAVs) are prone to collisions owing to environmental disturbances and localization errors. Consequently, a UAV that can endure collisions and perform recovery control in critical aerial missions is desirable to prevent loss of the vehicle and/or payload. We address this problem by proposing a novel foldable quadrotor system which can sustain collisions and recover safely. The quadrotor is designed with integrated mechanical compliance using a torsional spring such that the impact time is increased and the net impact force on the main body is decreased. The post-collision dynamics is analysed and a recovery controller is proposed which stabilizes the system to a hovering location without additional collisions. Flight test results on the proposed and a conventional quadrotor demonstrate that for the former, integrated spring-damper characteristics reduce the rebound velocity and lead to simple recovery control algorithms in the event of unintended collisions as compared to a rigid quadrotor of the same dimension.

cs.RO↗
arXiv2020

When Shall I Be Empathetic? The Utility of Empathetic Parameter Estimation in Multi-Agent Interactions

Human-robot interactions (HRI) can be modeled as dynamic or differential games with incomplete information, where each agent holds private reward parameters. Due to the open challenge in finding perfect Bayesian equilibria of such games, existing studies often consider approximated solutions composed of parameter estimation and motion planning steps, in order to decouple the belief and physical dynamics. In parameter estimation, current approaches often assume that the reward parameters of the robot are known by the humans. We argue that by falsely conditioning on this assumption, the robot performs non-empathetic estimation of the humans' parameters, leading to undesirable values even in the simplest interactions. We test this argument by studying a two-vehicle uncontrolled intersection case with short reaction time. Results show that when both agents are unknowingly aggressive (or non-aggressive), empathy leads to more effective parameter estimation and higher reward values, suggesting that empathy is necessary when the true parameters of agents mismatch with their common belief. The proposed estimation and planning algorithms are therefore more robust than the existing approaches, by fully acknowledging the nature of information asymmetry in HRI. Lastly, we introduce value approximation techniques for real-time execution of the proposed algorithms.

cs.RO↗
arXiv2020

Linear Lavrent'ev Integral Equation for the Numerical Solution of a Nonlinear Coefficient Inverse Problem

For the first time, we develop a convergent numerical method for the llinear integral equation derived by M.M. Lavrent'ev in 1964 with the goal to solve a coefficient inverse problem for a wave-like equation in 3D. The data are non overdetermined. Convergence analysis is presented along with the numerical results. An intriguing feature of the Lavrent'ev equation is that, without any linearization, it reduces a highly nonlinear coefficient inverse problem to a linear integral equation of the first kind. Nevertheless, numerical results for that equation, which use the data generated for that coefficient inverse problem, show a good reconstruction accuracy. This is similar with the classical Gelfand-Levitan equation derived in 1951, which is valid in the 1D case.

math.NA↗
arXiv2020

Design and Control of SQUEEZE: A Spring-augmented QUadrotor for intEractions with the Environment to squeeZE-and-fly

This paper presents the design and control of a novel quadrotor with a variable geometry to physically interact with cluttered environments and fly through narrow gaps and passageways. This compliant quadrotor with passive morphing capabilities is designed using torsional springs at every arm hinge to allow for rotation driven by external forces. We derive the dynamic model of this variable geometry quadrotor (SQUEEZE), and develop an adaptive controller for trajectory tracking. The corresponding Lyapunov stability proof of attitude tracking is also presented. Further, an admittance controller is designed to account for changes in yaw due to physical interactions with the environment. Finally, the proposed design is validated in flight tests with two setups: a small gap and a passageway. The experimental results demonstrate the unique capability of the SQUEEZE in navigating through constrained narrow spaces.

cs.RO↗
arXiv2020

Predictive Modeling of Periodic Behavior for Human-Robot Symbiotic Walking

We propose in this paper Periodic Interaction Primitives - a probabilistic framework that can be used to learn compact models of periodic behavior. Our approach extends existing formulations of Interaction Primitives to periodic movement regimes, i.e., walking. We show that this model is particularly well-suited for learning data-driven, customized models of human walking, which can then be used for generating predictions over future states or for inferring latent, biomechanical variables. We also demonstrate how the same framework can be used to learn controllers for a robotic prosthesis using an imitation learning approach. Results in experiments with human participants indicate that Periodic Interaction Primitives efficiently generate predictions and ankle angle control signals for a robotic prosthetic ankle, with MAE of 2.21 degrees in 0.0008s per inference. Performance degrades gracefully in the presence of noise or sensor fall outs. Compared to alternatives, this algorithm functions 20 times faster and performed 4.5 times more accurately on test subjects.

cs.RO↗
arXiv2020

Convexification for an Inverse Parabolic Problem

A convexification-based numerical method for a Coefficient Inverse Problem for a parabolic PDE is presented. The key element of this method is the presence of the so-called Carleman Weight Function in the numerical scheme. Convergence analysis ensures the global convergence of this method, as opposed to the local convergence of the conventional least squares minimization techniques. Numerical results demonstrate a good performance.

math.NA↗