arXiv subjects

Wenci Xin

Publications and source records attributed to Wenci Xin.

5 recordsLinked to original sources

arXiv2026

Safety Control of a Hyper-redundant Robot via Adaptive Weighted Control Barrier Functions

Hyper-redundant robots are well suited for confined-space manipulation due to their high dexterity, but safe operation in cluttered environments remains challenging. In addition, their slender structures often lead to uneven load distributions and nonuniform tracking errors along the body. To address these issues, this work proposes a weighted control barrier functions (W-CBFs) framework that enforces safety constraints while reducing tracking errors caused by uneven loading. The proposed controller was first evaluated on a circular path-following task under different obstacle configurations. With fixed weights, compared to the non-weighted method, the maximum reduction in root-mean-square (RMS) tracking error was 59.6\% in simulation and 87.7\% in physical experiments. An adaptive weighting strategy was then investigated based on the discrepancy between simulated and experimental performance under different mapping functions. The RMS errors were further reduced by 21.9\% and 8.5\%, respectively, although the error increases when obstacles were located close to the robot body. Finally, the robot was evaluated in a cleaning task requiring coverage of a rectangular area and compared with manual teleoperation. Although the controller was not explicitly optimized for area coverage, the autonomous strategy achieved comparable or better coverage performance while avoiding collisions with the surrounding frame, whereas collisions occurred during manual operation.

cs.RO↗

arXiv2026

Cosserat Modeling of Trimmed Helicoid Soft Arms with a Separated-Section Constitutive Law

Cosserat rod models for soft robots usually construct sectional stiffness by summing material properties over a common cross-section. This assumption becomes inaccurate for trimmed helicoid arms, where load-bearing helix domains are separated and connected only through sparse fused crossings. This paper formulates a separated-section constitutive law that evaluates each helix domain in its local frame and pulls its constitutive response back to the backbone, yielding an effective backbone stiffness. Sparse-fusion mechanics captures the additional compliance caused by relative motion between neighboring domains and determines channel-wise reduction profiles $η_c(s/L)$ for bending, torsion, and extension. The resulting effective sectional stiffness is strongly anisotropic: bending and extension are reduced by about one order of magnitude, whereas torsion remains close to the effective backbone stiffness. The resulting sectional law is embedded in a geometrically exact dynamic Cosserat model with GVS discretization and routed-tendon actuation. Across 103 measured configurations, the three datasets give pooled normalized position errors of \SI{7.7}{\percent}, \SI{6.7}{\percent}, and \SI{7.8}{\percent}, while each full-arm solve requires approximately \SI{0.3}{s} on one CPU core (Intel Xeon, Cascade Lake, \SI{2.8}{GHz}), enabling rapid model-based planning, state and load estimation, and morphology--control co-design for architected soft robots.

cs.RO↗

arXiv2026

Cycle-resolved Cephalopod-Inspired Pulsed-Jet Robot With High-Volume Expulsion and Drag-Reduced Gliding

Cephalopod pulsed-jet locomotion is not a single isolated expulsion event, but a coordinated cycle involving jet expulsion, passive gliding, and mantle refilling. Inspired by this cycle-resolved biological strategy, this paper presents a cephalopod-inspired pulsed-jet robot with a rigid-soft hybrid origami mantle that enables large, actively driven, and geometry-guided body deformation. The proposed mantle integrates rigid folding panels with a compliant silicone framework, allowing a 75% effective cavity-volume reduction during expulsion and reducing the projected cross-sectional drag area by approximately 75.7% in the contracted gliding configuration. Using this platform, we formulate a cycle-resolved framework to separately investigate how expelled volume, glide duration, and refill pathway influence whole-cycle locomotion performance. Experiments show that the robot reaches a peak speed of approximately 0.5 m/s (3.8 BL/s) and an average speed exceeding 0.2 m/s (1.5 BL/s) within the first jetting cycle. The results further demonstrate the roles of high expelled-volume-ratio contraction in speed generation, reduced-drag-area gliding under different glide durations, and mantle-aperture-inspired passive inlet valves in assisting refill. This work provides both a robotic implementation of actively deformable cephalopod-like jet propulsion and a unified experimental platform for studying expulsion-gliding-refilling dynamics in pulsed-jet locomotion.

cs.RO↗

arXiv2026

Shape Control of a Planar Hyper-Redundant Robot via Hybrid Kinematics-Informed and Learning-based Approach

Hyper-redundant robots offer high dexterity, making them good at operating in confined and unstructured environments. To extend the reachable workspace, we built a multi-segment flexible rack actuated planar robot. However, the compliance of the flexible mechanism introduces instability, rendering it sensitive to external and internal uncertainties. To address these limitations, we propose a hybrid kinematics-informed and learning-based shape control method, named SpatioCoupledNet. The neural network adopts a hierarchical design that explicitly captures bidirectional spatial coupling between segments while modeling local disturbance along the robot body. A confidence-gating mechanism integrates prior kinematic knowledge, allowing the controller to adaptively balance model-based and learned components for improved convergence and fidelity. The framework is validated on a five-segment planar hyper-redundant robot under three representative shape configurations. Experimental results demonstrate that the proposed method consistently outperforms both analytical and purely neural controllers. In complex scenarios, it reduces steady-state error by up to 75.5% against the analytical model, and accelerates convergence by up to 20.5% compared to the data-driven baseline. Furthermore, gating analysis reveals a state-dependent authority fusion, shifting toward data-driven predictions in unstable states, while relying on physical priors in the remaining cases. Finally, we demonstrate robust performance in a dynamic task where the robot maintains a fixed end-effector position while avoiding moving obstacles, achieving a precise tip-positioning accuracy with a mean error of 10.47 mm.

cs.RO↗

arXiv2026

Octopus-like Reaching Motion: A Perspective Inspired by Whipping

The stereotypical reaching motion of the octopus arm has drawn growing attention for its efficient control of a highly deformable body. Previous studies suggest that its characteristic bend propagation may share underlying principles with the dynamics of a whip. This work investigates whether whip-like passive dynamics in water can reproduce the kinematic features observed in biological reaching and their similarities and differences. Platform-based whipping tests were performed in water and air while systematically varying material stiffness and driving speed. Image-based quantification revealed that the Ecoflex Gel 2 arm driven at 150 rpm (motor speed) reproduced curvature propagation similar to that observed in octopus reaching. However, its bend-point velocity decreased monotonically rather than exhibiting the biological bell-shaped profile, confirming that the octopus reaching movement is not merely a passive whipping behavior. The absence of propagation in air further highlights the critical role of the surrounding medium in forming octopus-like reaching motion. This study provides a new perspective for understand biological reaching movement, and offers a potential platform for future hydrodynamic research.

cs.RO↗