arXiv subjects

Weiwen Wu

Publications and source records attributed to Weiwen Wu.

29 records · Page 2Linked to original sources

arXiv2021

Stabilizing Deep Tomographic Reconstruction

Tomographic image reconstruction with deep learning is an emerging field, but a recent landmark study reveals that several deep reconstruction networks are unstable for computed tomography (CT) and magnetic resonance imaging (MRI). Specifically, three kinds of instabilities were reported: (1) strong image artefacts from tiny perturbations, (2) small features missing in a deeply reconstructed image, and (3) decreased imaging performance with increased input data. On the other hand, compressed sensing (CS) inspired reconstruction methods do not suffer from these instabilities because of their built-in kernel awareness. For deep reconstruction to realize its full potential and become a mainstream approach for tomographic imaging, it is thus critically important to meet this challenge by stabilizing deep reconstruction networks. Here we propose an Analytic Compressed Iterative Deep (ACID) framework to address this challenge. ACID synergizes a deep reconstruction network trained on big data, kernel awareness from CS-inspired processing, and iterative refinement to minimize the data residual relative to real measurement. Our study demonstrates that the deep reconstruction using ACID is accurate and stable, and sheds light on the converging mechanism of the ACID iteration under a Bounded Relative Error Norm (BREN) condition. In particular, the study shows that ACID-based reconstruction is resilient against adversarial attacks, superior to classic sparsity-regularized reconstruction alone, and eliminates the three kinds of instabilities. We anticipate that this integrative data-driven approach will help promote development and translation of deep tomographic image reconstruction networks into clinical applications.

eess.IV↗

arXiv2021

Deep Learning based Spectral CT Imaging

Spectral computed tomography (CT) has attracted much attention in radiation dose reduction, metal artifacts removal, tissue quantification and material discrimination. The x-ray energy spectrum is divided into several bins, each energy-bin-specific projection has a low signal-noise-ratio (SNR) than the current-integrating counterpart, which makes image reconstruction a unique challenge. Traditional wisdom is to use prior knowledge based iterative methods. However, this kind of methods demands a great computational cost. Inspired by deep learning, here we first develop a deep learning based reconstruction method; i.e., U-net with L_p^p-norm, Total variation, Residual learning, and Anisotropic adaption (ULTRA). Specifically, we emphasize the Various Multi-scale Feature Fusion and Multichannel Filtering Enhancement with a denser connection encoding architecture for residual learning and feature fusion. To address the image deblurring problem associated with the $L_2^2$-loss, we propose a general $L_p^p$-loss, $p>0$ Furthermore, the images from different energy bins share similar structures of the same object, the regularization characterizing correlations of different energy bins is incorporated into the $L_p^p$-loss function, which helps unify the deep learning based methods with traditional compressed sensing based methods. Finally, the anisotropically weighted total variation is employed to characterize the sparsity in the spatial-spectral domain to regularize the proposed network. In particular, we validate our ULTRA networks on three large-scale spectral CT datasets, and obtain excellent results relative to the competing algorithms. In conclusion, our quantitative and qualitative results in numerical simulation and preclinical experiments demonstrate that our proposed approach is accurate, efficient and robust for high-quality spectral CT image reconstruction.

eess.IV↗

arXiv2021

AI-Enabled Ultra-Low-Dose CT Reconstruction

By the ALARA (As Low As Reasonably Achievable) principle, ultra-low-dose CT reconstruction is a holy grail to minimize cancer risks and genetic damages, especially for children. With the development of medical CT technologies, the iterative algorithms are widely used to reconstruct decent CT images from a low-dose scan. Recently, artificial intelligence (AI) techniques have shown a great promise in further reducing CT radiation dose to the next level. In this paper, we demonstrate that AI-powered CT reconstruction offers diagnostic image quality at an ultra-low-dose level comparable to that of radiography. Specifically, here we develop a Split Unrolled Grid-like Alternative Reconstruction (SUGAR) network, in which deep learning, physical modeling and image prior are integrated. The reconstruction results from clinical datasets show that excellent images can be reconstructed using SUGAR from 36 projections. This approach has a potential to change future healthcare.

eess.IV↗

arXiv2021

Deep Iteration Assisted by Multi-level Obey-pixel Network Discriminator (DIAMOND) for Medical Image Recovery

Image restoration is a typical ill-posed problem, and it contains various tasks. In the medical imaging field, an ill-posed image interrupts diagnosis and even following image processing. Both traditional iterative and up-to-date deep networks have attracted much attention and obtained a significant improvement in reconstructing satisfying images. This study combines their advantages into one unified mathematical model and proposes a general image restoration strategy to deal with such problems. This strategy consists of two modules. First, a novel generative adversarial net(GAN) with WGAN-GP training is built to recover image structures and subtle details. Then, a deep iteration module promotes image quality with a combination of pre-trained deep networks and compressed sensing algorithms by ADMM optimization. (D)eep (I)teration module suppresses image artifacts and further recovers subtle image details, (A)ssisted by (M)ulti-level (O)bey-pixel feature extraction networks (D)iscriminator to recover general structures. Therefore, the proposed strategy is named DIAMOND.

eess.IV↗

arXiv2020

Clinical Micro-CT Empowered by Interior Tomography, Robotic Scanning, and Deep Learning

While micro-CT systems are instrumental in preclinical research, clinical micro-CT imaging has long been desired with cochlear implantation as a primary example. The structural details of the cochlear implant and the temporal bone require a significantly higher image resolution than that (about 0.2 mm) provided by current medical CT scanners. In this paper, we propose a clinical micro-CT (CMCT) system design integrating conventional spiral cone-beam CT, contemporary interior tomography, deep learning techniques, and technologies of micro-focus X-ray source, photon-counting detector (PCD), and robotic arms for ultrahigh resolution localized tomography of a freely-selected volume of interest (VOI) at a minimized radiation dose level. The whole system consists of a standard CT scanner for a clinical CT exam and VOI specification, and a robotic-arm based micro-CT scanner for a local scan at much higher spatial and spectral resolution as well as much reduced radiation dose. The prior information from global scan is also fully utilized for background compensation to improve interior tomography from local data for accurate and stable VOI reconstruction. Our results and analysis show that the proposed hybrid reconstruction algorithm delivers superior local reconstruction, being insensitive to the misalignment of the isocenter position and initial view angle in the data/image registration while the attenuation error caused by scale mismatch can be effectively addressed with bias correction. These findings demonstrate the feasibility of our system design. We envision that deep learning techniques can be leveraged for optimized imaging performance. With high resolution imaging, high dose efficiency and low system cost synergistically, our proposed CMCT system has great potentials in temporal bone imaging as well as various other clinical applications.

physics.med-ph↗

arXiv2019

Block Matching Frame based Material Reconstruction for Spectral CT

Spectral computed tomography (CT) has a great potential in material identification and decomposition. To achieve high-quality material composition images and further suppress the x-ray beam hardening artifacts, we first propose a one-step material reconstruction model based on Taylor first-order expansion. Then, we develop a basic material reconstruction method named material simultaneous algebraic reconstruction technique (MSART). Considering the local similarity of each material image, we incorporate a powerful block matching frame (BMF) into the material reconstruction (MR) model and generate a BMF based MR (BMFMR) method. Because the BMFMR model contains the L0-norm problem, we adopt a split-Bregman method for optimization. The numerical simulation and physical phantom experiment results validate the correctness of the material reconstruction algorithms and demonstrate that the BMF regularization outperforms the total variation and no-local mean regularizations.

cs.CV↗

arXiv2019

Improved Material Decomposition with a Two-step Regularization for spectral CT

One of the advantages of spectral computed tomography (CT) is it can achieve accurate material components using the material decomposition methods. The image-based material decomposition is a common method to obtain specific material components, and it can be divided into two steps: image reconstruction and post material decomposition. To obtain accurate material maps, the image reconstruction method mainly focuses on improving image quality by incorporating regularization priors. Very recently, the regularization priors are introduced into the post material decomposition procedure in the iterative image-based methods. Since the regularization priors can be incorporated into image reconstruction and post image-domain material decomposition, the performance of regularization by combining these two cases is still an open problem. To realize this goal, the material accuracy from those steps are first analyzed and compared. Then, to further improve the accuracy of decomposition materials, a two-step regularization based method is developed by incorporating priors into image reconstruction and post material decomposition. Both numerical simulation and preclinical mouse experiments are performed to demonstrate the advantages of the two-step regularization based method in improving material accuracy.

eess.IV↗

arXiv2019

DLIMD: Dictionary Learning based Image-domain Material Decomposition for spectral CT

The potential huge advantage of spectral computed tomography (CT) is its capability to provide accuracy material identification and quantitative tissue information. This can benefit clinical applications, such as brain angiography, early tumor recognition, etc. To achieve more accurate material components with higher material image quality, we develop a dictionary learning based image-domain material decomposition (DLIMD) for spectral CT in this paper. First, we reconstruct spectral CT image from projections and calculate material coefficients matrix by selecting uniform regions of basis materials from image reconstruction results. Second, we employ the direct inversion (DI) method to obtain initial material decomposition results, and a set of image patches are extracted from the mode-1 unfolding of normalized material image tensor to train a united dictionary by the K-SVD technique. Third, the trained dictionary is employed to explore the similarities from decomposed material images by constructing the DLIMD model. Fourth, more constraints (i.e., volume conservation and the bounds of each pixel within material maps) are further integrated into the model to improve the accuracy of material decomposition. Finally, both physical phantom and preclinical experiments are employed to evaluate the performance of the proposed DLIMD in material decomposition accuracy, material image edge preservation and feature recovery.

eess.IV↗

arXiv2018

Non-local Low-rank Cube-based Tensor Factorization for Spectral CT Reconstruction

Spectral computed tomography (CT) reconstructs material-dependent attenuation images with the projections of multiple narrow energy windows, it is meaningful for material identification and decomposition. Unfortunately, the multi-energy projection dataset always contains strong complicated noise and result in the projections has a lower signal-noise-ratio (SNR). Very recently, the spatial-spectral cube matching frame (SSCMF) was proposed to explore the non-local spatial-spectrum similarities for spectral CT. The method constructs such a group by clustering up a series of non-local spatial-spectrum cubes. The small size of spatial patch for such a group make SSCMF fails to encode the sparsity and low-rank properties. In addition, the hard-thresholding and collaboration filtering operation in the SSCMF are also rough to recover the image features and spatial edges. While for all steps are operated on 4-D group, we may not afford such huge computational and memory load in practical. To avoid the above limitation and further improve image quality, we first formulate a non-local cube-based tensor instead of the group to encode the sparsity and low-rank properties. Then, as a new regularizer, Kronecker-Basis-Representation (KBR) tensor factorization is employed into a basic spectral CT reconstruction model to enhance the ability of extracting image features and protecting spatial edges, generating the non-local low-rank cube-based tensor factorization (NLCTF) method. Finally, the split-Bregman strategy is adopted to solve the NLCTF model. Both numerical simulations and realistic preclinical mouse studies are performed to validate and assess the NLCTF algorithm. The results show that the NLCTF method outperforms the other competitors.

cs.CV↗

arXiv2018

Low-dose spectral CT reconstruction using L0 image gradient and tensor dictionary

Spectral computed tomography (CT) has a great superiority in lesion detection, tissue characterization and material decomposition. To further extend its potential clinical applications, in this work, we propose an improved tensor dictionary learning method for low-dose spectral CT reconstruction with a constraint of image gradient L0-norm, which is named as L0TDL. The L0TDL method inherits the advantages of tensor dictionary learning (TDL) by employing the similarity of spectral CT images. On the other hand, by introducing the L0-norm constraint in gradient image domain, the proposed method emphasizes the spatial sparsity to overcome the weakness of TDL on preserving edge information. The alternative direction minimization method (ADMM) is employed to solve the proposed method. Both numerical simulations and real mouse studies are perform to evaluate the proposed method. The results show that the proposed L0TDL method outperforms other competing methods, such as total variation (TV) minimization, TV with low rank (TV+LR), and TDL methods.

cs.CV↗

arXiv2016

BPF-type Region-of-interest Reconstruction for Parallel Translational Computed Tomography

Recently, an ultra-low-cost linear scan based tomography architecture was proposed by our team. Similar to linear tomosynthesis, the source and detector are translated in opposite directions and the data acquisition system targets on a region-of-interest (ROI) to acquire data for image reconstruction. This kind of tomography architecture was named parallel translational computed tomography (PTCT). In our previous studies, filtered backprojection (FBP)-type algorithms were developed to reconstruct images from PTCT. However, the reconstructed ROI images from truncated projections have severe truncation artifacts. In this paper, we propose two backprojection filtering (BPF)-type algorithms named MP-BPF and MZ-BPF to reconstruct ROI images from truncated PTCT data. A weight function is constructed to deal with data redundancy for multi-linear translations modes. Extensive numerical simulations are performed to evaluate the proposed MP-BPF and MZ-BPF algorithms for PTCT in fan-beam geometry. Qualitative and quantitative results demonstrate that the proposed BPF-type algorithms can not only accurately reconstruct ROI images from truncated projections but also provide high-quality images for the entire image support in some circumstances.

physics.med-ph↗