arXiv subjects

Weihua Zhuang

Publications and source records attributed to Weihua Zhuang.

At least 19 recordsLinked to original sources

arXiv2026

Physics-Informed Digital Twins for Channel Estimation and Traffic Prediction of Non-Terrestrial Networks

In non-terrestrial networks (NTN), high-speed satellite orbital motion, limited pilot signaling resources, and spatiotemporally heterogeneous traffic make accurate channel and traffic state characterization particularly challenging. In this paper, we propose a physics-informed digital twin (DT) framework for channel estimation and traffic prediction. Particularly, it formulates channel state information (CSI) reconstruction as a controllable generative process guided by physical-prior tensors. Through a physics-aware attention mechanism, it effectively reconstructs the real-time full-resolution CSI from highly sparse and outdated pilots. Then, we develop an orbit-adaptive spatiotemporal graph neural network for traffic prediction. By leveraging a dual-stream attention mechanism to capture intra- and inter-plane spatial dependencies and a gated recurrent unit to model temporal evolution, the neural network effectively predicts stochastic traffic residuals, which are integrated with the deterministic physical traffic baseline to form the complete traffic state. To evaluate the proposed DT framework, we establish a high-fidelity NTN DT simulation platform based on real-world Starlink ephemeris, global population, and ERA5 weather data. Experimental results demonstrate that our framework significantly outperforms state-of-the-art baselines in both CSI reconstruction and traffic prediction accuracy.

eess.SP↗

arXiv2026

Rotatable Coupler Antenna Enhanced Wireless Network: Modeling and Coupler Rotation Optimization

Flexible coupler antenna systems have recently received significant research interest due to their capability to intelligently reconfigure wireless channels by controlling coupler positions and/or rotations and dynamically exploiting mutual coupling. In this paper, we investigate a new type of flexible coupler antenna, termed rotatable coupler antenna (RCA), for enabling spectrum and energy efficient wireless communication cost-effectively. Specifically, an RCA consists of one fixed active antenna and multiple low-cost passive couplers, each of which can independently rotate in three-dimensional (3D) space, so as to collaboratively achieve mechanical beamforming without requiring additional radio-frequency (RF) chains for the couplers. We study an RCA-enhanced point-to-point communication system, where one RCA is deployed at the transmitter to serve a single user equipped with a fixed antenna. Based on multi-port circuit theory, we establish the channel model and characterize the mutual coupling coefficients as a function of coupler rotations. We formulate a new problem to maximize the received signal-to-noise ratio (SNR) at the user by optimizing the 3D rotations of all couplers, subject to practical coupler rotation constraints. To tackle this nonconvex problem, we develop a spherical-cap conditional-gradient-based algorithm with cross-entropy-method initialization. Simulation results demonstrate that the proposed RCA system can significantly improve communication performance in comparison with benchmark schemes, while requiring substantially fewer active antennas and RF chains.

cs.IT↗

arXiv2026

Reconfigurable Coupler Antenna for Wireless Networks

The reconfigurable coupler antenna (RCA), also called the flexible coupler antenna (FCA), is a new technique that aims to improve the performance of wireless communication networks by reconfiguring the positions and rotations of low-cost couplers around fixed-position active antennas to harness mutual coupling. Specifically, different couplers can independently adjust their positions and/or rotations at the transceiver to reshape the induced currents on the couplers for radiation, thereby collaboratively achieving mechanical beamforming for directional signal enhancement or nulling. The position and/or rotation reconfiguration of passive couplers provides a new and cost-effective means of enhancing wireless communication performance, while significantly reducing the antenna and radio-frequency (RF) chain costs of conventional active arrays. The compact and low form-factor structure of the RCA makes it particularly appealing for devices with stringent size, weight, and power (SWAP) constraints. In this article, we provide an overview of RCA to reveal its promising capabilities in wireless networks, including its system modeling, practical implementation, and competitive advantages over existing techniques. We present a variety of RCA-enabled performance enhancements in terms of mechanical beamforming gain, path-loss reduction, fading mitigation, spatial multiplexing gain, interference suppression, and geometric gain. Furthermore, we elaborate on the design challenges of RCA as well as promising solutions, and discuss the key applications of RCA in wireless networks. Finally, numerical results are presented to verify the substantial capacity gains enabled by RCA-aided transmission in wireless networks.

cs.IT↗

arXiv2026

Flexible Coupler Array with Reconfigurable Pattern: Mechanical Beamforming and Digital Agent

Flexible coupler is a promising solution for enhancing wireless network capacity by moving passive couplers around a fixed-position active antenna to reshape the induced currents on passive elements. Motivated by this, this paper proposes a novel flexible coupler array that incorporates additional degrees of freedom (DoF) in radiation pattern reconfiguration and enhanced communication coverage with low hardware cost. Specifically, a new form of mechanical beamforming can be obtained by moving only the passive coupling elements while keeping the active antenna stationary. In addition, the flexible coupler antenna can slide along a rail toward users, thereby enhancing communication coverage. To fully exploit the potential of the flexible coupler array, we formulate a two-timescale sum-rate maximization problem with statistical channel state information (CSI). The antenna position is optimized based on scattering cluster-core statistics in the slow timescale, while mechanical beamforming is optimized based on multipath channel statistics in the fast timescale, subject to movement and energy constraints. To address the coupling between timescales and the high cost of extensive channel sampling, we develop a digital agent framework that leverages an electromagnetic (EM) map to generate statistical channel information for different user and antenna positions. Then, a deep neural network is trained to learn a slow-fast performance (SFP) surrogate. Mechanical beamforming at the fast timescale is obtained by selecting per-antenna radiation patterns from a predefined dictionary via a convex relaxation. Simulation results verify the performance gains achieved by the proposed flexible coupler array and the digital-agent-assisted algorithm.

cs.IT↗

arXiv2026

Coupler Position Optimization and Channel Estimation for Flexible Coupler Antenna Aided Multiuser Communication

In this paper, we propose a distributed flexible coupler antenna (FCA) array to enhance communication performance with low hardware cost. At each FCA, there is one fixed-position active antenna and multiple passive couplers that can move within a designated region around the active antenna. Moreover, each FCA is equipped with a local processing unit (LPU). All LPUs exchange signals with a central processing unit (CPU) for joint signal processing. We study an FCA-aided multiuser multiple-input multiple-output (MIMO) system, where an FCA array base station (BS) is deployed to enhance the downlink communication between the BS and multiple single-antenna users. We formulate optimization problems to maximize the achievable sum rate of users by jointly optimizing the coupler positions and digital beamforming, subject to movement constraints on the coupler positions and the transmit power constraint. To address the resulting nonconvex optimization problem, the digital beamforming is expressed as a function of the FCA position vectors, which are then optimized using the proposed distributed coupler position optimization algorithm. Considering a structured time domain pattern of pilots and coupler positions, pilot-assisted centralized and distributed channel estimation algorithms are designed under the FCA array architecture. Simulation results demonstrate that the distributed FCA array achieves substantial rate gains over conventional benchmarks in multiuser systems without moving active antennas, and approaches the performance of fully active arrays while significantly reducing hardware cost and power consumption. Moreover, the proposed channel estimation algorithms outperform the benchmark schemes in terms of both pilot overhead and channel reconstruction accuracy.

cs.IT↗

arXiv2025

iRadioDiff: Physics-Informed Diffusion Model for Indoor Radio Map Construction and Localization

Radio maps (RMs) serve as environment-aware electromagnetic (EM) representations that connect scenario geometry and material properties to the spatial distribution of signal strength, enabling localization without costly in-situ measurements. However, constructing high-fidelity indoor RMs remains challenging due to the prohibitive latency of EM solvers and the limitations of learning-based methods, which often rely on sparse measurements or assumptions of homogeneous material, which are misaligned with the heterogeneous and multipath-rich nature of indoor environments. To overcome these challenges, we propose iRadioDiff, a sampling-free diffusion-based framework for indoor RM construction. iRadioDiff is conditioned on access point (AP) positions, and physics-informed prompt encoded by material reflection and transmission coefficients. It further incorporates multipath-critical priors, including diffraction points, strong transmission boundaries, and line-of-sight (LoS) contours, to guide the generative process via conditional channels and boundary-weighted objectives. This design enables accurate modeling of nonstationary field discontinuities and efficient construction of physically consistent RMs. Experiments demonstrate that iRadioDiff achieves state-of-the-art performance in indoor RM construction and received signal strength based indoor localization, which offers effective generalization across layouts and material configurations. Code is available at https://github.com/UNIC-Lab/iRadioDiff.

cs.LG↗

arXiv2025

Performance Analysis of End-to-End LEO Satellite-Aided Shore-to-Ship Communications: A Stochastic Geometry Approach

Low Earth orbit (LEO) satellite networks have shown strategic superiority in maritime communications, assisting in establishing signal transmissions from shore to ship through space-based links. Traditional performance modeling based on multiple circular orbits is challenging to characterize large-scale LEO satellite constellations, thus requiring a tractable approach to accurately evaluate the network performance. In this paper, we propose a theoretical framework for an LEO satellite-aided shore-to-ship communication network (LEO-SSCN), where LEO satellites are distributed as a binomial point process (BPP) on a specific spherical surface. The framework aims to obtain the end-to-end transmission performance by considering signal transmissions through either a marine link or a space link subject to Rician or Shadowed Rician fading, respectively. Due to the indeterminate position of the serving satellite, accurately modeling the distance from the serving satellite to the destination ship becomes intractable. To address this issue, we propose a distance approximation approach. Then, by approximation and incorporating a threshold-based communication scheme, we leverage stochastic geometry to derive analytical expressions of end-to-end transmission success probability and average transmission rate capacity. Extensive numerical results verify the accuracy of the analysis and demonstrate the effect of key parameters on the performance of LEO-SSCN.

eess.SP↗

arXiv2025

User-Centric Communication Service Provision for Edge-Assisted Mobile Augmented Reality

Future 6G networks are envisioned to facilitate edge-assisted mobile augmented reality (MAR) via strengthening the collaboration between MAR devices and edge servers. In order to provide immersive user experiences, MAR devices must timely upload camera frames to an edge server for simultaneous localization and mapping (SLAM)-based device pose tracking. In this paper, to cope with user-specific and non-stationary uplink data traffic, we develop a digital twin (DT)-based approach for user-centric communication service provision for MAR. Specifically, to establish DTs for individual MAR devices, we first construct a data model customized for MAR that captures the intricate impact of the SLAM-based frame uploading mechanism on the user-specific data traffic pattern. We then define two DT operation functions that cooperatively enable adaptive switching between different data-driven models for capturing non-stationary data traffic. Leveraging the user-oriented data management introduced by DTs, we propose an algorithm for network resource management that ensures the timeliness of frame uploading and the robustness against inherent inaccuracies in data traffic modeling for individual MAR devices. Trace-driven simulation results demonstrate that the user-centric communication service provision achieves a 14.2% increase in meeting the camera frame uploading delay requirement in comparison with the slicing-based communication service provision widely used for 5G.

cs.NI↗

arXiv2025

Polarforming Antenna Enhanced Sensing and Communication: Modeling and Optimization

In this paper, we propose a novel polarforming antenna (PA) to achieve cost-effective wireless sensing and communication. Specifically, the PA can enable polarforming to adaptively control the antenna's polarization electrically as well as tune its position/rotation mechanically, so as to effectively exploit polarization and spatial diversity to reconfigure wireless channels for improving sensing and communication performance. We study an PA-enhanced integrated sensing and communication (ISAC) system that utilizes user location sensing to facilitate communication between an PA-equipped base station (BS) and PA-equipped users. First, we model the PA channel in terms of transceiver antenna polarforming vectors and antenna positions/rotations. We then propose a two-timescale ISAC protocol, where in the slow timescale, user localization is first performed, followed by the optimization of the BS antennas' positions and rotations based on the sensed user locations; subsequently, in the fast timescale, transceiver polarforming is adapted to cater to the instantaneous channel state information (CSI), with the optimized BS antennas' positions and rotations. We propose a new polarforming-based user localization method that uses a structured time-domain pattern of pilot-polarforming vectors to extract the common stable components in the PA channel across different polarizations based on the parallel factor (PARAFAC) tensor model. Moreover, we maximize the achievable average sum-rate of users by jointly optimizing the fast-timescale transceiver polarforming, including phase shifts and amplitude variations, along with the slow-timescale antenna rotations and positions at the BS. Simulation results validate the effectiveness of polarforming-based localization algorithm and demonstrate the performance advantages of polarforming, antenna placement, and their joint design.

cs.IT↗

arXiv2025

Hybrid-Field 6D Movable Antenna for Terahertz Communications: Channel Modeling and Estimation

In this work, we study a six-dimensional movable antenna (6DMA)-enhanced Terahertz (THz) network that supports a large number of users with a few antennas by controlling the three-dimensional (3D) positions and 3D rotations of antenna surfaces/subarrays at the base station (BS). However, the short wavelength of THz signals combined with a large 6DMA movement range extends the near-field region. As a result, a user can be in the far-field region relative to the antennas on one 6DMA surface, while simultaneously residing in the near-field region relative to other 6DMA surfaces. Moreover, 6DMA THz channel estimation suffers from increased computational complexity and pilot overhead due to uneven power distribution across the large number of candidate position-rotation pairs, as well as the limited number of radio frequency (RF) chains in THz bands. To address these issues, we propose an efficient hybrid-field generalized 6DMA THz channel model, which accounts for planar wave propagation within individual 6DMA surfaces and spherical waves among different 6DMA surfaces. Furthermore, we propose a low-overhead channel estimation algorithm that leverages directional sparsity to construct a complete channel map for all potential antenna position-rotation pairs. Numerical results show that the proposed hybrid-field channel model achieves a sum rate close to that of the ground-truth near-field channel model and confirm that the channel estimation method yields accurate results with low complexity.

cs.IT↗

arXiv2025

A Tutorial on Six-Dimensional Movable Antenna for 6G Networks: Synergizing Positionable and Rotatable Antennas

Six-dimensional movable antenna (6DMA) is a new and revolutionary technique that fully exploits the wireless channel spatial variations at the transmitter/receiver by flexibly adjusting the three-dimensional (3D) positions and/or 3D rotations of antennas/antenna surfaces (sub-arrays), thereby improving the performance of wireless networks cost-effectively without the need to deploy additional antennas. It is thus expected that the integration of new 6DMAs into future sixth-generation (6G) wireless networks will fundamentally enhance antenna agility and adaptability, and introduce new degrees of freedom (DoFs) for system design. Despite its great potential, 6DMA faces new challenges to be efficiently implemented in wireless networks, including corresponding architectures, antenna position and rotation optimization, channel estimation, and system design from both communication and sensing perspectives. In this paper, we provide a tutorial on 6DMA-enhanced wireless networks to address the above issues by unveiling associated new channel models, hardware implementations and practical position/rotation constraints, as well as various appealing applications in wireless networks. Moreover, we discuss two special cases of 6DMA, namely, rotatable 6DMA with fixed antenna position and positionable 6DMA with fixed antenna rotation, and highlight their respective design challenges and applications. We further present prototypes developed for 6DMA-enhanced communication along with experimental results obtained with these prototypes. Finally, we outline promising directions for further investigation.

cs.IT↗

arXiv2024

Revolutionizing QoE-Driven Network Management with Digital Agents in 6G

In this article, we present a digital agent (DA)-assisted network management framework for future sixth generation (6G) networks considering user quality of experience (QoE). A novel QoE metric is defined by incorporating the impact of user behavioral dynamics and environmental complexity on quality of service (QoS). A two-level DA architecture is proposed to assist the QoE-driven network slicing and orchestration. Three potential solutions are presented from the perspectives of DA data collection, resource scheduling, and DA deployment. A case study demonstrates that the proposed framework can effectively improve user QoE compared with benchmark schemes.

cs.NI↗

arXiv2024

Digital Twin-Assisted Robust and Adaptive Resource Slicing in LEO Satellite Networks

Resource slicing in low Earth orbit satellite networks (LSN) is essential to support diversified services. In this paper, we investigate a resource slicing problem in LSN to reserve resources in satellites to achieve efficient resource provisioning. To address the challenges of non-stationary service demands, inaccurate prediction, and satellite mobility, we propose an adaptive digital twin (DT)-assisted resource slicing scheme for robust and adaptive resource management in LSN. Specifically, a slice DT, being able to capture the service demand prediction uncertainty through collected service demand data, is constructed to enhance the robustness of resource slicing decisions for dynamic service demands. In addition, the constructed DT can emulate resource slicing decisions for evaluating their performance, enabling adaptive slicing decision updates to efficiently reserve resources in LSN. Simulation results demonstrate that the proposed scheme outperforms benchmark methods, achieving low service demand violations with efficient resource consumption.

cs.NI↗

arXiv2024

User-centric Immersive Communications in 6G: A Data-oriented Framework via Digital Twin

In this article, we present a novel user-centric service provision for immersive communications (IC) in 6G to deal with the uncertainty of individual user behaviors while satisfying unique requirements on the quality of multi-sensory experience. To this end, we propose a data-oriented framework for network resource management, featuring personalized data management that can support network modeling tailored to different user demands. Our framework leverages the digital twin (DT) technique as a key enabler. Particularly, a DT is established for each user, and the data attributes in the DT are customized based on the characteristics of the user. The DT functions, corresponding to various data operations, are customized in the development, evaluation, and update of network models to meet unique user demands. A trace-driven case study demonstrates the effectiveness of our framework in achieving user-centric IC and the significance of personalized data management in 6G.

cs.NI↗

arXiv2024

Meta Learning Based Adaptive Cooperative Perception in Nonstationary Vehicular Networks

To accommodate high network dynamics in real-time cooperative perception (CP), reinforcement learning (RL) based adaptive CP schemes have been proposed, to allow adaptive switchings between CP and stand-alone perception modes among connected and autonomous vehicles. The traditional offline-training online-execution RL framework suffers from performance degradation under nonstationary network conditions. To achieve fast and efficient model adaptation, we formulate a set of Markov decision processes for adaptive CP decisions in each stationary local vehicular network (LVN). A meta RL solution is proposed, which trains a meta RL model that captures the general features among LVNs, thus facilitating fast model adaptation for each LVN with the meta RL model as an initial point. Simulation results show the superiority of meta RL in terms of the convergence speed without reward degradation. The impact of the customization level of meta models on the model adaptation performance has also been evaluated.

cs.NI↗

arXiv2024

Active ML for 6G: Towards Efficient Data Generation, Acquisition, and Annotation

This paper explores the integration of active machine learning (ML) for 6G networks, an area that remains under-explored yet holds potential. Unlike passive ML systems, active ML can be made to interact with the network environment. It actively selects informative and representative data points for training, thereby reducing the volume of data needed while accelerating the learning process. While active learning research mainly focuses on data annotation, we call for a network-centric active learning framework that considers both annotation (i.e., what is the label) and data acquisition (i.e., which and how many samples to collect). Moreover, we explore the synergy between generative artificial intelligence (AI) and active learning to overcome existing limitations in both active learning and generative AI. This paper also features a case study on a mmWave throughput prediction problem to demonstrate the practical benefits and improved performance of active learning for 6G networks. Furthermore, we discuss how the implications of active learning extend to numerous 6G network use cases. We highlight the potential of active learning based 6G networks to enhance computational efficiency, data annotation and acquisition efficiency, adaptability, and overall network intelligence. We conclude with a discussion on challenges and future research directions for active learning in 6G networks, including development of novel query strategies, distributed learning integration, and inclusion of human- and machine-in-the-loop learning.

cs.NI↗

arXiv2024

When Digital Twin Meets Generative AI: Intelligent Closed-Loop Network Management

Generative artificial intelligence (GAI) and digital twin (DT) are advanced data processing and virtualization technologies to revolutionize communication networks. Thanks to the powerful data processing capabilities of GAI, integrating it into DT is a potential approach to construct an intelligent holistic virtualized network for better network management performance. To this end, we propose a GAI-driven DT (GDT) network architecture to enable intelligent closed-loop network management. In the architecture, various GAI models can empower DT status emulation, feature abstraction, and network decision-making. The interaction between GAI-based and model-based data processing can facilitate intelligent external and internal closed-loop network management. To further enhance network management performance, three potential approaches are proposed, i.e., model light-weighting, adaptive model selection, and data-model-driven network management. We present a case study pertaining to data-model-driven network management for the GDT network, followed by some open research issues.

cs.NI↗

arXiv2024

Accuracy-Aware Cooperative Sensing and Computing for Connected Autonomous Vehicles

To maintain high perception performance among connected and autonomous vehicles (CAVs), in this paper, we propose an accuracy-aware and resource-efficient raw-level cooperative sensing and computing scheme among CAVs and road-side infrastructure. The scheme enables fined-grained partial raw sensing data selection, transmission, fusion, and processing in per-object granularity, by exploiting the parallelism among object classification subtasks associated with each object. A supervised learning model is trained to capture the relationship between the object classification accuracy and the data quality of selected object sensing data, facilitating accuracy-aware sensing data selection. We formulate an optimization problem for joint sensing data selection, subtask placement and resource allocation among multiple object classification subtasks, to minimize the total resource cost while satisfying the delay and accuracy requirements. A genetic algorithm based iterative solution is proposed for the optimization problem. Simulation results demonstrate the accuracy awareness and resource efficiency achieved by the proposed cooperative sensing and computing scheme, in comparison with benchmark solutions.

cs.NI↗