arXiv Science⌕ Search

arXiv subjects

Weibo Gao

Publications and source records attributed to Weibo Gao.

At least 91 records · Page 5Linked to original sources

Experimental demonstration of Quantum Overlapping Tomography

Quantum tomography is one of the major challenges of large-scale quantum information research due to the exponential time complexity. In this work, we develop and apply a Bayesian state estimation method to experimentally demonstrate quantum overlapping tomography [Phys. Rev. Lett. \textbf{124}, 100401 (2020)], a scheme intent on characterizing critical information of a many-body quantum system in logarithmic time complexity. By comparing the measurement results of full state tomography and overlapping tomography, we show that overlapping tomography gives accurate information of the system with much fewer state measurements than full state tomography.

quant-ph↗

Excited-state optically detected magnetic resonance of spin defects in hexagonal boron nitride

Negatively charged boron vacancy (VB-) centers in hexagonal boron nitride (hBN) are promising spin defects in a van der Waals crystal. Understanding the spin properties of the excited state (ES) is critical for realizing dynamic nuclear polarization. Here, we report zero-field splitting in the ES of DES = 2160 MHz and an optically detected magnetic resonance (ODMR) contrast of 12% at cryogenic temperature. The ES has a g-factor similar to the ground state. The ES photodynamics is further elucidated by measuring the level anti-crossing of the VB- defects under varying external magnetic fields. In contrast to nitrogen vacancy (NV-) centers in diamond, the emission change caused by excited-state level anti-crossing (ESLAC) is more prominent at cryo-temperature than at room temperature. Our results provide important information for utilizing the spin defects of hBN in quantum technology.

cond-mat.mes-hall↗

Coherent Manipulation with Resonant Excitation and Single Emitter Creation of Nitrogen Vacancy Centers in 4H Silicon Carbide

Silicon carbide (SiC) has become a key player in realization of scalable quantum technologies due to its ability to host optically addressable spin qubits and wafer-size samples. Here, we have demonstrated optically detected magnetic resonance (ODMR) with resonant excitation, and clearly identified the ground state energy levels of the NV centers in 4H-SiC. Coherent manipulation of NV centers in SiC has been achieved with Rabi and Ramsey oscillations. Finally, we show the successful generation and characterization of single nitrogen vacancy (NV) center in SiC employing ion implantation. Our results are highlighting the key role of NV centers in SiC as a potential candidate for quantum information processing.

cond-mat.mes-hall↗

2022 Roadmap for Materials for Quantum Technologies

Quantum technologies are poised to move the foundational principles of quantum physics to the forefront of applications. This roadmap identifies some of the key challenges and provides insights on materials innovations underlying a range of exciting quantum technology frontiers. Over the past decades, hardware platforms enabling different quantum technologies have reached varying levels of maturity. This has allowed for first proof-of-principle demonstrations of quantum supremacy, for example quantum computers surpassing their classical counterparts, quantum communication with reliable security guaranteed by laws of quantum mechanics, and quantum sensors uniting the advantages of high sensitivity, high spatial resolution, and small footprints. In all cases, however, advancing these technologies to the next level of applications in relevant environments requires further development and innovations in the underlying materials. From a wealth of hardware platforms, we select representative and promising material systems in currently investigated quantum technologies. These include both the inherent quantum bit systems as well as materials playing supportive or enabling roles, and cover trapped ions, neutral atom arrays, rare earth ion systems, donors in silicon, color centers and defects in wide-band gap materials, two-dimensional materials and superconducting materials for single-photon detectors. Advancing these materials frontiers will require innovations from a diverse community of scientific expertise, and hence this roadmap will be of interest to a broad spectrum of disciplines.

quant-ph↗

Monolithic Silicon Carbide Metalenses

Silicon carbide has emerged as a promising material platform for quantum photonics and nonlinear optics. These properties make the development of integrated photonic components in high-quality silicon carbide a critical aspect for the advancement of scalable on-chip networks. In this work, we numerically design, fabricate and demonstrate the performance of monolithic metalenses from SiC suitable for on-chip optical operations. We engineer two distinct lenses, with parabolic and cubic phase profiles, operating in the near infrared spectral range, which is of interest for quantum and photonic applications. We support the lens fabrication by optical transmission measurement and characterize the focal points of the lenses. Our results will accelerate the development of SiC nanophotonic devices and aid in an on chip integration of quantum emitters with meta-optical components.

physics.optics↗

Chiral phonons in a square lattice

Chiral phonons were initially proposed and further verified experimentally in two-dimensional (2D) hexagonal crystal lattices. Many intriguing features brought about by chiral phonons are attributed to the pseudo-angular momenta which are associated with the threefold rotational symmetry of hexagonal lattices. Here, we go beyond the hexagonal crystals and investigate the chiral phonons in systems with fourfold rotational symmetry. We clarify the symmetry requirements for the emergence of chiral phonons in both 2D square lattices and 3D tetragonal lattices. For 2D, the realization of $C_4$ chiral phonons requires the breaking of time-reversal symmetry; while for 3D, they can exist on the $C_4$-invariant path in a chiral tetragonal lattice. These phonons have the advantage that they can be more readily coupled with optical transitions, which facilitates their experimental detection. We demonstrate our idea via model analysis and first-principles calculations of concrete materials, including the MnAs monolayer and the $α$-cristobalite. Our work reveals chiral phonons beyond the hexagonal lattices and paves the way for further exploration of chiral phonon physics in square/tetragonal materials and metamaterials.

cond-mat.mtrl-sci↗

Chiral Phonons in Chiral Materials

The concept of chirality makes ubiquitous appearance in nature. Particularly, both a structure and its collective excitations may acquire well defined chiralities. In this work, we reveal an intrinsic connection between the chiralities of a crystal structure and its phonon excitations. We show that the phonon chirality and its propagation direction are strongly coupled with the lattice chirality, which will be reversed when a chiral lattice is switched to its enantiomorph. In addition, distinct from achiral lattices, propagating chiral phonons exist for chiral crystals also on the principal axis through the $Γ$ point, which strengthens its relevance to various physical processes. We demonstrate our theory with a 1D helix-chain model and with a concrete and important 3D material, the $α$-quartz. We predict a chirality diode effect in these systems, namely, at certain frequency window, a chiral signal can only pass the system in one way but not the other, specified by the system chirality. Experimental setups to test our theory are proposed. Our work discovers fundamental physics of chirality coupling between different levels of a system, and the predicted effects will provide a new way to control thermal transport and design information devices.

cond-mat.mtrl-sci↗

Layer Hall effect in a 2D topological Axion antiferromagnet

While ferromagnets have been known and exploited for millennia, antiferromagnets (AFMs) were only discovered in the 1930s. The elusive nature indicates AFMs' unique properties: At large scale, due to the absence of global magnetization, AFMs may appear to behave like any non-magnetic material; However, such a seemingly mundane macroscopic magnetic property is highly nontrivial at microscopic level, where opposite spin alignment within the AFM unit cell forms a rich internal structure. In topological AFMs, such an internal structure leads to a new possibility, where topology and Berry phase can acquire distinct spatial textures. Here, we study this exciting possibility in an AFM Axion insulator, even-layered MnBi$_2$Te$_4$ flakes, where spatial degrees of freedom correspond to different layers. Remarkably, we report the observation of a new type of Hall effect, the layer Hall effect, where electrons from the top and bottom layers spontaneously deflect in opposite directions. Specifically, under no net electric field, even-layered MnBi$_2$Te$_4$ shows no anomalous Hall effect (AHE); However, applying an electric field isolates the response from one layer and leads to the surprising emergence of a large layer-polarized AHE (~50%$\frac{e^2}{h}$). Such a layer Hall effect uncovers a highly rare layer-locked Berry curvature, which serves as a unique character of the space-time $\mathcal{PT}$-symmetric AFM topological insulator state. Moreover, we found that the layer-locked Berry curvature can be manipulated by the Axion field, E$\cdot$B, which drives the system between the opposite AFM states. Our results achieve previously unavailable pathways to detect and manipulate the rich internal spatial structure of fully-compensated topological AFMs. The layer-locked Berry curvature represents a first step towards spatial engineering of Berry phase, such as through layer-specific moiré potential.

cond-mat.mtrl-sci↗

Higher-Order Nodal Points in Two Dimensions

A two-dimensional (2D) topological semimetal is characterized by the nodal points in its low-energy band structure. While the linear nodal points have been extensively studied, especially in the context of graphene, the realm beyond linear nodal points remains largely unexplored. Here, we explore the possibility of higher-order nodal points, i.e., points with higher-order energy dispersions, in 2D systems. We perform an exhaustive search over all 80 layer groups both with and without spin-orbit coupling (SOC), and reveal all possible higher-order nodal points. We show that they can be classified into two categories: the quadratic nodal point (QNP) and the cubic nodal point (CNP). All the 2D higher-order nodal points have twofold degeneracy, and the order of dispersion cannot be higher than three. QNPs only exist in the absence of SOC, whereas CNPs only exist in the presence of SOC. Particularly, the CNPs represent a new topological state not known before. We show that they feature nontrivial topological charges, leading to extensive topological edge bands. Our work completely settles the problem of higher-order nodal points, discovers novel topological states in 2D, and provides detailed guidance to realize these states. Possible material candidates and experimental signatures are discussed.

cond-mat.mes-hall↗

Fabrication of photonic resonators in bulk 4H-SiC

The design and engineering of photonic architectures, suitable to enhance, collect and guide light on chip is needed for applications in quantum photonics and quantum optomechanics. In this work we apply a Faraday cage based oblique angle etch method to fabricate various functional photonic devices from 4H Silicon Carbide - a material that has attracted attention in recent years, due to its potential in optomechanics, nonlinear optics and quantum information. We detail the processing conditions and thoroughly address the geometrical and optical characteristics of the fabricated devices. Employing photoluminescence measurements we demonstrate high quality factors for suspended microring resonators of up to 3500 in the visible range. Such devices will be applicable in the future to augment the properties of SiC in integrated on chip quantum photonics.

physics.optics↗

Versatile Direct Writing of Dopants in a Solid State Host Through Recoil Implantation

Modifying material properties at the nanoscale is crucially important for devices in nanoelectronics, nanophotonics and quantum information. Optically active defects in wide band gap materials, for instance, are vital constituents for the realisation of quantum technologies. Yet, the introduction of atomic defects through direct ion implantation remains a fundamental challenge. Herein, we establish a universal method for material doping by exploiting one of the most fundamental principles of physics - momentum transfer. As a proof of concept, we direct-write arrays of emitters into diamond via momentum transfer from a Xe+ focused ion beam (FIB) to thin films of the group IV dopants pre-deposited onto a diamond surface. We conclusively show that the technique, which we term knock-on doping, can yield ultra-shallow dopant profiles localized to the top 5 nm of the target surface, and use it to achieve sub-50 nm lateral resolution. The knock-on doping method is cost-effective, yet very versatile, powerful and universally suitable for applications such as electronic and magnetic doping of atomically thin materials and engineering of near-surface states of semiconductor devices.

physics.app-ph↗

Enhanced Valley Zeeman Splitting in Fe-Doped Monolayer MoS2

The Zeeman effect offers unique opportunities for magnetic manipulation of the spin degree of freedom (DOF). Recently, valley Zeeman splitting, referring to the lifting of valley degeneracy, has been demonstrated in two-dimensional transition metal dichalcogenides (TMDs) at liquid helium temperature. However, to realize the practical applications of valley pseudospins, the valley DOF must be controllable by a magnetic field at room temperature, which remains a significant challenge. Magnetic doping in TMDs can enhance the Zeeman splitting, however, to achieve this experimentally is not easy. Here, we report unambiguous magnetic manipulation of valley Zeeman splitting at 300 K (g = -6.4) and 10 K (g = -11) in a CVD-grown Fe-doped MoS2 monolayer; the effective g factor can be tuned to -20.7 by increasing the Fe dopant concentration, which represents an approximately fivefold enhancement as compared to undoped MoS2. Our measurements and calculations reveal that the enhanced splitting and geff factors are due to the Heisenberg exchange interaction of the localized magnetic moments (Fe 3d electrons) with MoS2 through the d-orbital hybridization.

cond-mat.mtrl-sci↗

Room temperature nanocavity laser with interlayer excitons in 2D heterostructures

Atomically thin layered two dimensional (2D) material has provided a rich library for both fundamental research and device applications. One of the special advantages is that, bandgap engineering and controlled material response can be achieved by stacking different 2D materials. Recently several types of excitonic lasers have been reported based on Transition metal dichalcogenide (TMDC) monolayers, however, the emission is still the intrinsic energy bandgap of the monolayers and lasers harnessing the flexibility of Van der Waals heterostructures have not been demonstrated yet. Here, we report for the first time a room temperature interlayer exciton laser with MoS2/WSe2 heterostructures. The onset of lasing action was identified by a combination of distinct kink in the 'L-L' curve and the noticeable collapse of spectral linewidth. Different from visible emission of intralayer excitons for both MoS2 and WSe2, our interlayer exciton laser works in the infrared range, which is fully compatible with the well-established technologies in silicon photonics. Thanks to the long lifetime of interlayer excitons, the requirement of the cavity quality factor is relaxed by orders of magnitude. The demonstration of room temperature interlayer exciton laser might open new perspectives for the development of coherent light source with tailored optical properties on silicon photonics platform.

cond-mat.mes-hall↗

Electrically controllable router of interlayer excitons

Optoelectronic devices which allow rerouting, modulation and detection of the optical signals would be extremely beneficial for telecommunication technology. One of the most promising platforms for such devices are excitonic devices, as they offer very efficient coupling to light. Of especial importance are those based on indirect excitons, because of their long lifetime. Here we demonstrate excitonic transistor and router based on bilayer of WSe2. Due to their strong dipole moment, excitons in bilayer WSe2 can be controlled by transverse electric field. At the same time, unlike indirect excitons in artificially stacked heterostructures based on transition metal dichalcogenides - naturally stacked bilayer offers long exciton lifetime, smaller non-radiative losses, and are much simpler in fabrication.

physics.app-ph↗

Quantum Nanophotonics with Group IV defects in Diamond

Diamond photonics is an ever growing field of research driven by the prospects of harnessing diamond and its colour centres as suitable hardware for solid-state quantum applications. The last two decades have seen the field been shaped by the nitrogen-vacancy (NV) centre both with breakthrough fundamental physics demonstrations and practical realizations. Recently however, an entire suite of other diamond defects has emerged. They are M V colour centres, where M indicates one of the elements in the IV column of the periodic table Si, Ge, Sn and Pb, and V indicates lattice vacancies, i.e. missing next-neighbour carbon atoms. These centres exhibit a much stronger emission into the zero phonon line then the NV centre, they display inversion symmetry, and can be engineered using ion implantation all attractive features for scalable quantum photonic architectures based on solid-state, single-photon sources. In this perspective, we highlight the leading techniques for engineering and characterizing these diamond defects, discuss the current state-of-the-art of group IV-based devices and provide an outlook of the future directions the field is taking towards the realisation of solid-state quantum photonics with diamond.

physics.optics↗

Room temperature interlayer exciton valley polarization and valley Hall effect

For monolayer transition metal chalcogenides (TMDs), electrons and excitons in different valleys can be driven to opposite directions by the Berry curvature, serving as a valley-dependent effective magnetic field. In addition to monolayer TMDs, Van der Waals heterostructures provide an attractive platform for emerging valley physics and devices with superior physics properties. Interlayer excitons in TMD heterostructures have a long valley lifetime as compared to monolayer intralayer excitons. Here we report an interlayer exciton valley polarization and valley Hall effect in MoS2/WSe2 in room temperature. The separation for excitons with different valley index is observed with polarization-dependent photoluminescence mapping. The exciton separation is perpendicular to their transport directions. The valley Hall effect for indirect excitons is sustained even at room temperature, in contrast with the cryo-temperatures in previous experiments in monolayer TMDs. Room temperature demonstration of the indirect exciton valley polarization and valley Hall effect might open new perspectives for the development of opto-valleytronic devices based on TMD heterostructures.

cond-mat.mes-hall↗

Valley-Layer Coupling: A New Design Principle for Valleytronics

We introduce the concept of valley-layer coupling (VLC) in two-dimensional materials, where the low-energy electronic states in the emergent valleys have valley-contrasted layer polarization such that each state is spatially localized on the top or bottom super-layer. The VLC enables a direct coupling between valley and gate electric field, opening a new route towards electrically controlled valleytronics. We analyze the symmetry requirements for the system to host VLC, demonstrate our idea via first-principles calculations and model analysis of a concrete 2D material example, and show that an electric, continuous, wide-range, and switchable control of valley polarization can be achieved by VLC. Furthermore, we find that systems with VLC can exhibit other interesting physics, such as valley-contrasting linear dichroism and optical selection of the electric polarization of interlayer excitons.

cond-mat.mes-hall↗

Direct photoluminescence probing of ferromagnetism in monolayer two-dimensional CrBr3

Atomically thin magnets are the key element to build up spintronics based on two-dimensional materials. The surface nature of two-dimensional ferromagnet opens up opportunities to improve the device performance efficiently. Here, we report the intrinsic ferromagnetism in atomically thin monolayer CrBr3, directly probed by polarization resolved magneto-photoluminescence. The spontaneous magnetization persists in monolayer CrBr3 with a Curie temperature of 34 K. The development of magnons by the thermal excitation is in line with the spin-wave theory. We attribute the layer-number dependent hysteresis loops in thick layers to the magnetic domain structures. As a stable monolayer material in air, CrBr3 provides a convenient platform for fundamental physics and pushes the potential applications of the two-dimensional ferromagnetism.

cond-mat.mes-hall↗