arXiv Science⌕ Search

arXiv subjects

Wei Tan

Publications and source records attributed to Wei Tan.

At least 55 records · Page 3Linked to original sources
arXiv2023

Low-Resource Named Entity Recognition: Can One-vs-All AUC Maximization Help?

Named entity recognition (NER), a task that identifies and categorizes named entities such as persons or organizations from text, is traditionally framed as a multi-class classification problem. However, this approach often overlooks the issues of imbalanced label distributions, particularly in low-resource settings, which is common in certain NER contexts, like biomedical NER (bioNER). To address these issues, we propose an innovative reformulation of the multi-class problem as a one-vs-all (OVA) learning problem and introduce a loss function based on the area under the receiver operating characteristic curve (AUC). To enhance the efficiency of our OVA-based approach, we propose two training strategies: one groups labels with similar linguistic characteristics, and another employs meta-learning. The superiority of our approach is confirmed by its performance, which surpasses traditional NER learning in varying NER settings.

cs.CL↗
arXiv2023

Inverse design and additive manufacturing of shape-morphing structures based on functionally graded composites

Shape-morphing structures possess the ability to change their shapes from one state to another, and therefore, offer great potential for a broad range of applications. A typical paradigm of morphing is transforming from an initial two-dimensional (2D) flat configuration into a three-dimensional (3D) target structure. One popular fabrication method for these structures involves programming cuts in specific locations of a thin sheet material (i.e.~kirigami), forming a desired 3D shape upon application of external mechanical load. In this paper, a novel inverse design strategy is proposed by modifying the bending stiffness via introducing distributed modulus in functionally graded composites (FGCs). The longitudinal modulus of each cross-sectional slice can be controlled through the rule of mixtures, hence matching the required modulus distribution along the elastic strip. Following the proposed framework, a diverse range of structures is obtained with different Gaussian curvatures in both numerical simulations and experiments. A very good agreement is achieved between the measured shapes of morphed structures and the targets. In addition, the compressive rigidity and specific energy absorption during compression of FGC-based hemi-ellipsoidal morphing structures with various aspect ratios were also examined numerically and validated against experiments. By conducting systematical numerical simulations, we also demonstrate the multifunctionality of the modulus-graded shape-morphing composites. This new inverse design framework provides an opportunity to create shape-morphing structures by utilising modulus-graded composite materials, which can be employed in a variety of applications involving multi-physical environments. Furthermore, this framework underscores the versatility of the approach, enabling precise control over material properties at a local level.

physics.app-ph↗
arXiv2023

Room-Temperature Ferromagnetism in Fe-doped SnSe Bulk Single Crystalline Semiconductor

The quest for pragmatic room-temperature (RT) magnetic semiconductors (MSs) with a suitable bandgap constitutes one of the contemporary opportunities to be exploited. This may provide a materials platform for to bring new-generation ideal information device technologies into real-world applications where the otherwise conventionally separately utilized charge and spin are simultaneously exploited. Here we present RT ferromagnetism in an Fe-doped SnSe (Fe:SnSe) van der Waals (vdW) single crystalline ferromagnetic semiconductor (FMS) with a semiconducting bandgap of ~1.19 eV (comparable to those of Si and GaAs). The synthesized Fe:SnSe single crystals feature a dilute Fe content of less than 1.0 at%, a Curie temperature of ~310 K, a layered vdW structure identical to that of pristine SnSe, and the absence of in-gap defect states. The Fe:SnSe vdW diluted magnetic semiconductor (DMS) single crystals are grown using a simple temperature-gradient melt-growth process, in which the magnetic Fe atom doping is realized uniquely using FeI2 as the dopant precursor whose melting point is low with respect to crystal growth, and which in principle possesses industrially unlimited scalability. Our work adds a new member in the family of long-searching RT magnetic semiconductors, and may establish a generalized strategy for large-volume production of related DMSs.

cond-mat.mtrl-sci↗
arXiv2023

Using Large Language Models to Provide Explanatory Feedback to Human Tutors

Research demonstrates learners engaging in the process of producing explanations to support their reasoning, can have a positive impact on learning. However, providing learners real-time explanatory feedback often presents challenges related to classification accuracy, particularly in domain-specific environments, containing situationally complex and nuanced responses. We present two approaches for supplying tutors real-time feedback within an online lesson on how to give students effective praise. This work-in-progress demonstrates considerable accuracy in binary classification for corrective feedback of effective, or effort-based (F1 score = 0.811), and ineffective, or outcome-based (F1 score = 0.350), praise responses. More notably, we introduce progress towards an enhanced approach of providing explanatory feedback using large language model-facilitated named entity recognition, which can provide tutors feedback, not only while engaging in lessons, but can potentially suggest real-time tutor moves. Future work involves leveraging large language models for data augmentation to improve accuracy, while also developing an explanatory feedback interface.

cs.CL↗
arXiv2023

Anomalous Nernst effect induced terahertz emission in a single ferromagnetic film

By developing a bidirectional-pump terahertz (THz) emission spectroscopy, we reveal an anomalous Nernst effect (ANE) induced THz emission in a single ferromagnetic film. Based on the distinctive symmetry of the THz signals, ANE is unequivocally distinguished from the previously attributed ultrafast demagnetization and anomalous Hall effect mechanisms. A quantitative method is established to separate the different contributions, demonstrating a significant ANE contribution that even overwhelms other competing mechanisms. Our work not only clarifies the origin of the ferromagnetic-based THz emission, but also offers a fertile platform for investigating the ultrafast magnetism and THz spintronics.

cond-mat.mes-hall↗
arXiv2023

Robust Educational Dialogue Act Classifiers with Low-Resource and Imbalanced Datasets

Dialogue acts (DAs) can represent conversational actions of tutors or students that take place during tutoring dialogues. Automating the identification of DAs in tutoring dialogues is significant to the design of dialogue-based intelligent tutoring systems. Many prior studies employ machine learning models to classify DAs in tutoring dialogues and invest much effort to optimize the classification accuracy by using limited amounts of training data (i.e., low-resource data scenario). However, beyond the classification accuracy, the robustness of the classifier is also important, which can reflect the capability of the classifier on learning the patterns from different class distributions. We note that many prior studies on classifying educational DAs employ cross entropy (CE) loss to optimize DA classifiers on low-resource data with imbalanced DA distribution. The DA classifiers in these studies tend to prioritize accuracy on the majority class at the expense of the minority class which might not be robust to the data with imbalanced ratios of different DA classes. To optimize the robustness of classifiers on imbalanced class distributions, we propose to optimize the performance of the DA classifier by maximizing the area under the ROC curve (AUC) score (i.e., AUC maximization). Through extensive experiments, our study provides evidence that (i) by maximizing AUC in the training process, the DA classifier achieves significant performance improvement compared to the CE approach under low-resource data, and (ii) AUC maximization approaches can improve the robustness of the DA classifier under different class imbalance ratios.

cs.CL↗
arXiv2023

AUC Maximization for Low-Resource Named Entity Recognition

Current work in named entity recognition (NER) uses either cross entropy (CE) or conditional random fields (CRF) as the objective/loss functions to optimize the underlying NER model. Both of these traditional objective functions for the NER problem generally produce adequate performance when the data distribution is balanced and there are sufficient annotated training examples. But since NER is inherently an imbalanced tagging problem, the model performance under the low-resource settings could suffer using these standard objective functions. Based on recent advances in area under the ROC curve (AUC) maximization, we propose to optimize the NER model by maximizing the AUC score. We give evidence that by simply combining two binary-classifiers that maximize the AUC score, significant performance improvement over traditional loss functions is achieved under low-resource NER settings. We also conduct extensive experiments to demonstrate the advantages of our method under the low-resource and highly-imbalanced data distribution settings. To the best of our knowledge, this is the first work that brings AUC maximization to the NER setting. Furthermore, we show that our method is agnostic to different types of NER embeddings, models and domains. The code to replicate this work will be provided upon request.

cs.CL↗
arXiv2023

Does Informativeness Matter? Active Learning for Educational Dialogue Act Classification

Dialogue Acts (DAs) can be used to explain what expert tutors do and what students know during the tutoring process. Most empirical studies adopt the random sampling method to obtain sentence samples for manual annotation of DAs, which are then used to train DA classifiers. However, these studies have paid little attention to sample informativeness, which can reflect the information quantity of the selected samples and inform the extent to which a classifier can learn patterns. Notably, the informativeness level may vary among the samples and the classifier might only need a small amount of low informative samples to learn the patterns. Random sampling may overlook sample informativeness, which consumes human labelling costs and contributes less to training the classifiers. As an alternative, researchers suggest employing statistical sampling methods of Active Learning (AL) to identify the informative samples for training the classifiers. However, the use of AL methods in educational DA classification tasks is under-explored. In this paper, we examine the informativeness of annotated sentence samples. Then, the study investigates how the AL methods can select informative samples to support DA classifiers in the AL sampling process. The results reveal that most annotated sentences present low informativeness in the training dataset and the patterns of these sentences can be easily captured by the DA classifier. We also demonstrate how AL methods can reduce the cost of manual annotation in the AL sampling process.

cs.CL↗
arXiv2023

Modelling Fatigue Behaviours and Lifetimes of Novel GLARE Laminates under Random Loading Spectrum

This paper aims to experimentally and numerically probe fatigue behaviours and lifetimes of novel GLARE (glass laminate aluminium reinforced epoxy) laminates under random loading spectrum. A mixed algorithm based on fatigue damage concepts of three-phase materials was proposed for modelling progressive fatigue damage mechanisms and fatigue life of fibre metal laminates (FML) under random loading spectrum. To validate the proposed modelling algorithm, fatigue tests were conducted on the GLARE 2/1 and GLARE 3/2 laminates subjected to random loading spectrum, and fatigue mechanisms were discussed by using scanning electron microscope (SEM) analysis. It is shown that predominant fatigue failure of the GLARE laminate depends on the reference load level of random loading spectrum. Specifically, dominant fatigue failure of the GLARE laminate is dependent on fatigue strength of fibre layer at a high reference load level, but metal layer at a low reference load level. Numerical predictions agree well with experimental results, demonstrating that the proposed mixed modelling algorithm can effectively simulate fatigue behaviours and lives of the GLARE laminate under random loading spectrum.

physics.app-ph↗
arXiv2022

Modelling Pre-fatigue, Low-velocity Impact and Fatigue behaviours of Composite Helicopter Tail Structures under Multipoint Coordinated Loading Spectrum

This paper aims to numerically study the pre-fatigue, low-velocity impact (LVI) and fatigue progressive damage behaviours of a full-scale composite helicopter tail structure under multipoint coordinated loading spectrum. First, a fatigue progressive damage model (PDM) incorporating multiaxial fatigue residual strength degradation rule, fatigue failure criteria based on fatigue residual strength concept and sudden stiffness degradation rule was proposed. Then, an LVI progressive damage model for plain-weave (PW) and unidirectional (UD) composites was developed. Moreover, a full-process analysis algorithm with a reasonable damage transfer strategy for pre-fatigue, LVI and fatigue progressive damage analysis was proposed. Finally, a highly computational efficient and accurate full-scale global-local finite element (FE) model of helicopter tail structure was built to predict strain distribution under two flight working conditions, to predict LVI damage under impact loading, and to assess fatigue damage behaviours under multipoint coordinated loading spectrum. The numerical predictions agree well with test results from this work and literature data, indicating that the developed pre-fatigue, LVI, fatigue PDMs and algorithms, as well as the global-local FE modelling based on shell-to-solid coupling, can effectively analyse the impact damage tolerance of full-scale aircraft structures.

eess.SY↗
arXiv2022

ECO v1: Towards Event-Centric Opinion Mining

Events are considered as the fundamental building blocks of the world. Mining event-centric opinions can benefit decision making, people communication, and social good. Unfortunately, there is little literature addressing event-centric opinion mining, although which significantly diverges from the well-studied entity-centric opinion mining in connotation, structure, and expression. In this paper, we propose and formulate the task of event-centric opinion mining based on event-argument structure and expression categorizing theory. We also benchmark this task by constructing a pioneer corpus and designing a two-step benchmark framework. Experiment results show that event-centric opinion mining is feasible and challenging, and the proposed task, dataset, and baselines are beneficial for future studies.

cs.CL↗
arXiv2022

The method of solving initial structure by Seidel aberration theory for extreme ultraviolet lithography objective

In this paper, a method for solving the initial structure of an off-axis multi-mirror system applied to extreme ultraviolet (EUV) lithography using a paraxial ray-tracing algorithm based on Seidel aberration theory is proposed. By tracing the characteristic rays in the reflection system, the height and paraxial angle on each surface can be obtained, then through the relationship between the Seidel aberration coefficient and these parameters, the initial structure with good aberration performance can be solved. We can obtain different initial structures by adding different initial condition constraints. In this paper, we have solved two different initial structures by assigning different optical powers as different initial structures, and on this basis, we have optimized two off-axis six-mirror systems with numerical aperture (NA) of 0.25. Their wavefront aberration RMS value is about 0.04 wavelength, and the absolute distortion is less than 1.2nm, with good imaging quality. We believe that this method can greatly improve the design efficiency and optimization effect of complex multi-mirror systems.

physics.optics↗
arXiv2022

Local well-posedness and global existence for the Popowicz system

Popowicz system, as the interacting system of Camassa-Holm and Degasperis-Procesi equations, has attracted some attention in recent years. In this paper, we first study the local well-posedness for the cauchy problem of Popowicz system in nonhomogeneous Besov spaces $B^s_{p,r}\times B^s_{p,r}$ with $s> \max\{2, \frac{1}{p}+\frac{3}{2}\}$ or $(s=2, 2\leq p \leq \infty, 1\leq r\leq 2)$. Moreover, a new blow-up criterion and global existence with different initial values are obtained.

math.AP↗
arXiv2021

Diversity Enhanced Active Learning with Strictly Proper Scoring Rules

We study acquisition functions for active learning (AL) for text classification. The Expected Loss Reduction (ELR) method focuses on a Bayesian estimate of the reduction in classification error, recently updated with Mean Objective Cost of Uncertainty (MOCU). We convert the ELR framework to estimate the increase in (strictly proper) scores like log probability or negative mean square error, which we call Bayesian Estimate of Mean Proper Scores (BEMPS). We also prove convergence results borrowing techniques used with MOCU. In order to allow better experimentation with the new acquisition functions, we develop a complementary batch AL algorithm, which encourages diversity in the vector of expected changes in scores for unlabelled data. To allow high performance text classifiers, we combine ensembling and dynamic validation set construction on pretrained language models. Extensive experimental evaluation then explores how these different acquisition functions perform. The results show that the use of mean square error and log probability with BEMPS yields robust acquisition functions, which consistently outperform the others tested.

cs.LG↗
arXiv2021

Progressive Damage Modelling and Fatigue Life Prediction of Plain-weave Composite Laminates with Low-velocity Impact Damage

This paper developed a fatigue-driven residual strength model considering the effects of low-velocity impact (LVI) damage and stress ratio. New fatigue failure criteria based on fatigue-driven residual strength concept and fatigue progressive damage model were developed to simulate fatigue damage growth and predict fatigue life for plain-weave composite laminates with LVI damage. To validate the proposed model, LVI tests of plain-weave glass fibre reinforced polymer 3238A/EW250F laminates were conducted, followed by post-impact constant amplitude tension-tension, compression-compression fatigue tests and multi-step fatigue tests. Experimental results indicate that the LVI damage degrades fatigue strength of plain-weave glass fibre composite laminate drastically. The load history also plays an important role on the fatigue accumulation damage of post-impact laminates. The new fatigue progressive damage model achieves a good agreement with fatigue life of post-impact laminates and is able to capture the load sequence effect, opening a new avenue to predict fatigue failure of composite laminates.

physics.app-ph↗
arXiv2021

The mechanical and electrochemical properties of polyaniline-coated carbon nanotube mat

The measured capacitance, modulus and strength of carbon nanotube-polyaniline (CNT-PANI) composite electrodes render them promising candidates for structural energy storage devices. Here, CNT-PANI composite electrodes are manufactured with electrodeposition of PANI onto the bundle network of CNT mats produced via a floating catalyst chemical vapour deposition process. PANI comprises 0% to 30% by volume of the electrode. The composition, modulus, strength and capacitance of the electrodes is measured in the initial state, after the first charge, and after 1000 charge/discharge cycles. Electrode modulus and strength increase with increasing CNT volume fraction; in contrast, the capacitance increases with increasing PANI mass. Charging or cycling reduce the electrode modulus and strength due to a decrease in CNT bundle volume fraction caused by swelling; the electrode capacitance also decreases due to a reduction in PANI mass. A micromechanical model is able to predict the stress-strain response of pre-charged and cycled electrodes, based upon their measured composition after pre-charging and cycling. The electrodes possess up to 63% of their theoretical capacitance, and their tensile strengths are comparable to those of engineering alloys. Their capacitance and strength decrease by less than 15% after the application of 1000 charge/discharge cycles. These properties illustrate their potential as structural energy storage devices.

physics.app-ph↗
arXiv2021

Data-driven modelling of scalable spinodoid structures for energy absorption

The project aims to explore a novel way to design and produce cellular materials with good energy absorption and recoverability properties. Spinodoid structures offer an alternative to engineering structures such as honeycombs and foam with scalability ensuring microscale benefits are reaped on a larger scale. Various materials and topologies have been utilised for numerical modeling and prototyping through additive manufacturing. Each design was evaluated using finite element modelling. Initial results from numerical models show anisotropic structures achieving high energy absorption efficiency. Through data-driven optimisation, results show a peak energy absorption value of 5.34 $MJ/m^{3}$ for anisotropic columnar structure. A physics-informed biased grid-search optimisation is faster due to parameters being explored in parallel. To validate the numerical model, compressive tests on various prototypes were conducted.

physics.app-ph↗
arXiv2021

Design of a high throughput telescope based on scanning off-axis Three-Mirror Anastigmat system

High throughput optical system is defined to possess the features of both large field of view (FOV) and high resolution. However, it is full of challenge to design such a telescope with the two conflicting specifications at the same time. In this paper, we propose a method to design a high throughput telescope based on the classical off-axis Three-Mirror Anastigmat (TMA) configuration by introducing a scanning mechanism. We derive the optimum initial design for the TMA system with no primary aberrations through characteristic ray tracing. During the design process, a real exit pupil is necessitated to accommodate the scanning mirror. By gradually increasing the system's FOV during the optimization procedure, we finally obtained a high throughput telescope design with an F-number of 6, a FOV of 60$^{\circ}$*1.5$^{\circ}$, and a long focal length of 876mm. In addition, the tolerance analysis is also conducted to demonstrate the instrumentation feasibility. We believe that this kind of large rectangle FOV telescope with high resolution has broad future applications in the optical remote sensing field.

astro-ph.IM↗