arXiv subjects

Wanbin Tang

Publications and source records attributed to Wanbin Tang.

12 recordsLinked to original sources

arXiv2026

Artificial Noise Versus Artificial Noise Elimination: Redefining Scaling Laws of Physical Layer Security

Artificial noise (AN) is a key physical-layer security scheme for wireless communications over multiple-input multiple-output wiretap channels. Recently, artificial noise elimination (ANE) has emerged as a strategy to mitigate the impact of AN on eavesdroppers. However, the influence of ANE on the secrecy rate when counteracting AN has not been investigated. In this paper, we address this issue by establishing scaling laws for both average and instantaneous secrecy rates in the presence of AN and ANE. Based on the scaling laws, several derived corollaries provide insights into the mutual constraints between the number of transmit antennas, receive antennas, and antennas at eavesdroppers, revealing the interplay between these factors. A key corollary reveals that when the eavesdropper possesses more than twice as many antennas as the transmitter, secure communication may no longer be guaranteed. Additionally, by comparing scenarios where ANE counteracts AN with those where AN is not employed, this study identifies sufficient conditions under which AN remains effective. Finally, the derived secrecy rates provide guidelines for system design, even in the presence of advanced ANE countermeasures implemented by the eavesdropper.

cs.IT↗

arXiv2026

6D Movable Antenna Enhanced Cell-free MIMO: Two-timescale Decentralized Beamforming and Antenna Movement Optimization

This paper investigates a six-dimensional movable antenna (6DMA)-aided cell-free multi-user multiple-input multiple-output (MIMO) communication system. In this system, each distributed access point (AP) can flexibly adjust its array orientation and antenna positions to adapt to spatial channel variations and enhance communication performance. However, frequent antenna movements and centralized beamforming based on global instantaneous channel state information (CSI) sharing among APs entail extremely high signal processing delay and system overhead, which is difficult to be practically implemented in high-mobility scenarios with short channel coherence time. To address these practical implementation challenges and improve scalability, a two-timescale decentralized optimization framework is proposed in this paper to jointly design the beamformer, antenna positions, and array orientations. In the short timescale, each AP updates its receive beamformer based on local instantaneous CSI and global statistical CSI. In the long timescale, the central processing unit optimizes the antenna positions and array orientations at all APs based on global statistical CSI to maximize the ergodic sum rate of all users. The resulting optimization problem is non-convex and involves highly coupled variables, thus posing significant challenges for obtaining efficient solutions. To address this problem, a constrained stochastic successive convex approximation algorithm is developed. Numerical results demonstrate that the proposed 6DMA-aided cell-free system with decentralized beamforming significantly outperforms other antenna movement schemes with less flexibility and even achieves a performance comparable to that of the centralized beamforming benchmark.

eess.SP↗

arXiv2024

6DMA-Aided Hybrid Beamforming with Joint Antenna Position and Orientation Optimization

This paper studies a sub-connected six-dimensional movable antenna (6DMA)-aided multi-user communication system. In this system, each sub-array is connected to a dedicated radio frequency chain and collectively moves and rotates as a unit within specific local regions. The movement and rotation capabilities of 6DMAs enhance design flexibility, facilitating the capture of spatial variations for improved communication performance. To fully characterize the effect of antenna position and orientation on wireless channels between the base station (BS) and users, we develop a field-response-based 6DMA channel model to account for the antenna radiation pattern and polarization. We then maximize the sum rate of multiple users, by jointly optimizing the digital and unit-modulus analog beamformers given the transmit power budget as well as the positions and orientations of sub-arrays within given movable and rotatable ranges at the BS. Due to the highly coupled variables, the formulated optimization problem is non-convex and thus challenging to solve. We develop a fractional programming-aided alternating optimization framework that integrates the Lagrange multiplier method, manifold optimization, and gradient descent to solve the problem. Numerical results demonstrate that the proposed 6DMA-aided sub-connected structure achieves a substantial sum-rate improvement over various benchmark schemes with less flexibility in antenna movement and can even outperform fully-digital beamforming systems that employ antenna position or orientation adjustments only. The results also highlight the necessity of considering antenna polarization for optimally adjusting antenna orientation.

eess.SP↗

arXiv2024

Intra-symbol Differential Amplitude Shift Keying-aided Blind Detector for Ambient Backscatter Communication Systems

Ambient backscatter communications (AmBC) are a promising technology for addressing the energy consumption challenge in wireless communications through the reflection or absorption of surrounding radio frequency (RF) signals. However, it grapples with the intricacies of ambient RF signal and the round-trip path loss. For traditional detectors, the incorporation of pilot sequences results in a reduction in spectral efficiency. Furthermore, traditional energy-based detectors are inherently susceptible to a notable error floor issue, attributed to the co-channel direct link interference (DLI). Consequently, this paper proposes a blind symbol detector without the prior knowledge of the channel state information, signal variance, and noise variance. By leveraging the intra-symbol differential amplitude shift keying (IDASK) scheme, this detector effectively redirects the majority of the DLI energy towards the largest eigenvalue of the received sample covariance matrix, thereby utilizing the second largest eigenvalue for efficient symbol detection. In addition, this paper conducts theoretical performance analyses of the proposed detector in terms of the false alarm probability, missed detection probability, and the bit-error rate (BER) lower bound. Simulation results demonstrate that the proposed blind detector exhibits a significant enhancement in symbol detection performance compared to its traditional counterparts.

eess.SP↗

arXiv2024

Self-Evolving Wireless Communications: A Novel Intelligence Trend for 6G and Beyond

Wireless communication is rapidly evolving, and future wireless communications (6G and beyond) will be more heterogeneous, multi-layered, and complex, which poses challenges to traditional communications. Adaptive technologies in traditional communication systems respond to environmental changes by modifying system parameters and structures on their own and are not flexible and agile enough to satisfy requirements in future communications. To tackle these challenges, we propose a novel self-evolving communication framework, which consists of three layers: data layer, information layer, and knowledge layer. The first two layers allow communication systems to sense environments, fuse data, and generate a knowledge base for the knowledge layer. When dealing with a variety of application scenarios and environments, the generated knowledge is subsequently fed back to the first two layers for communication in practical application scenarios to obtain self-evolving ability and enhance the robustness of the system. In this paper, we first highlight the limitations of current adaptive communication systems and the need for intelligence, automation, and self-evolution in future wireless communications. We overview the development of self-evolving technologies and conceive the concept of self-evolving communications with its hypothetical architecture. To demonstrate the power of self-evolving modules, we compare the performances of a communication system with and without evolution. We then provide some potential techniques that enable self-evolving communications and challenges in implementing them.

cs.ET↗

arXiv2024

Movable Antenna-Aided Hybrid Beamforming for Multi-User Communications

In this correspondence, we propose a movable antenna (MA)-aided multi-user hybrid beamforming scheme with a sub-connected structure, where multiple movable sub-arrays can independently change their positions within different local regions. To maximize the system sum rate, we jointly optimize the digital beamformer, analog beamformer, and positions of subarrays, under the constraints of unit modulus, finite movable regions, and power budget. Due to the non-concave/non-convex objective function/constraints, as well as the highly coupled variables, the formulated problem is challenging to solve. By employing fractional programming, we develop an alternating optimization framework to solve the problem via a combination of Lagrange multipliers, penalty method, and gradient descent. Numerical results reveal that the proposed MA-aided hybrid beamforming scheme significantly improves the sum rate compared to its fixed-position antenna (FPA) counterpart. Moreover, with sufficiently large movable regions, the proposed scheme with sub-connected MA arrays even outperforms the fully-connected FPA array.

cs.IT↗

arXiv2023

Near-Field Wideband Secure Communications: An Analog Beamfocusing Approach

In the rapidly advancing landscape of 6G, characterized by ultra-high-speed wideband transmission in millimeter-wave and terahertz bands, our paper addresses the pivotal task of enhancing physical layer security (PLS) within near-field wideband communications. We introduce true-time delayer (TTD)-incorporated analog beamfocusing techniques designed to address the interplay between near-field propagation and wideband beamsplit, an uncharted domain in existing literature. Our approach to maximizing secrecy rates involves formulating an optimization problem for joint power allocation and analog beamformer design, employing a two-stage process encompassing a semi-digital solution and analog approximation. This problem is efficiently solved through a combination of alternating optimization, fractional programming, and block successive upper-bound minimization techniques. Additionally, we present a low-complexity beamsplit-aware beamfocusing strategy, capitalizing on geometric insights from near-field wideband propagation, which can also serve as a robust initial value for the optimization-based approach. Numerical results substantiate the efficacy of the proposed methods, clearly demonstrating their superiority over TTD-free approaches in fortifying wideband PLS, as well as the advantageous secrecy energy efficiency achieved by leveraging low-cost analog devices.

eess.SP↗

arXiv2023

Robust Transceiver Design for Covert Integrated Sensing and Communications With Imperfect CSI

We propose a robust transceiver design for a covert integrated sensing and communications (ISAC) system with imperfect channel state information (CSI). Considering both bounded and probabilistic CSI error models, we formulate worst-case and outage-constrained robust optimization problems of joint trasceiver beamforming and radar waveform design to balance the radar performance of multiple targets while ensuring communications performance and covertness of the system. The optimization problems are challenging due to the non-convexity arising from the semi-infinite constraints (SICs) and the coupled transceiver variables. In an effort to tackle the former difficulty, S-procedure and Bernstein-type inequality are introduced for converting the SICs into finite convex linear matrix inequalities (LMIs) and second-order cone constraints. A robust alternating optimization framework referred to alternating double-checking is developed for decoupling the transceiver design problem into feasibility-checking transmitter- and receiver-side subproblems, transforming the rank-one constraints into a set of LMIs, and verifying the feasibility of beamforming by invoking the matrix-lifting scheme. Numerical results are provided to demonstrate the effectiveness and robustness of the proposed algorithm in improving the performance of covert ISAC systems.

cs.IT↗

arXiv2022

Energy-Efficient UAV Communications: A Generalised Propulsion Energy Consumption Model

This paper proposes a generalised propulsion energy consumption model (PECM) for rotary-wing ummanned aerial vehicles (UAVs) under the consideration of the practical thrust-to-weight ratio (TWR) with respect to the velocity, acceleration and direction change of the UAVs. To verify the effectiveness of the proposed PECM, we consider a UAV-enabled communication system, where a rotary-wing UAV serves multiple ground users as an aerial base station. We aim to maximize the energy efficiency (EE) of the UAV by jointly optimizing the user scheduling and UAV trajectory variables. However, the formulated problem is a non-convex fractional integer programming problem, which is challenging to obtain its optimal solution. To tackle this, we propose an efficient iterative algorithm by decomposing the original problem into two sub-problems to obtain a suboptimal solution based on the successive convex approximation technique. Simulation results show that the optimized UAV trajectory by applying the proposed PECM are smoother and the corresponding EE has significant improvement as compared to other benchmark schemes.

cs.IT↗

arXiv2021

Performance Analysis for Covert Communications Under Faster-than-Nyquist Signaling

In this letter, we analyze the performance of covert communications under faster-than-Nyquist (FTN) signaling in the Rayleigh block fading channel. Both Bayesian criterion- and Kullback-Leibler (KL) divergence-based covertness constraints are considered. Especially, for KL divergence-based one, we prove that both the maximum transmit power and covert rate under FTN signaling are higher than those under Nyquist signaling. Numerical results coincide with our analysis and validate the advantages of FTN signaling to realize covert data transmission.

cs.IT↗

arXiv2021

UAV-Enabled Cooperative Jamming for Covert Communications

This work employs an unmanned aerial vehicle (UAV) as a jammer to aid a covert communication from a transmitter Alice to a receiver Bob, where the UAV transmits artificial noise (AN) with random power to deliberately create interference to a warden Willie. In the considered system, the UAV's trajectory is critical to the covert communication performance, since the AN transmitted by the UAV also generates interference to Bob. To maximize the system performance, we formulate an optimization problem to jointly design the UAV's trajectory and Alice's transmit power. The formulated optimization problem is non-convex and is normally solved by a conventional iterative (CI) method, which requires multiple approximations based on Taylor expansions and an initialization on the UAV's trajectory. In order to eliminate these requirements, this work, for the first time, develops a geometric (GM) method to solve the optimization problem. By analyzing the covertness constraint, the GM method decouples the joint optimization into optimizing the UAV's trajectory and Alice's transmit power separately. Our examination shows that the GM method can significantly outperform the CI method in terms of achieving a higher average covert rate and the complexity of the GM method is lower than that of the CI method.

cs.IT↗

arXiv2016

Estimating the Distance Between Macro Base Station and Users in Heterogeneous Networks

In underlay heterogeneous networks (HetNets), the distance between a macro base station (MBS) and a macro user (MU) is crucial for a small-cell based station (SBS) to control the interference to the MU and achieve the coexistence. To obtain the distance between the MBS and the MU, the SBS needs a backhaul link from the macro system, such that the macro system is able to transmit the information of the distance to the SBS through the backhaul link. However, there may not exist any backhaul link from the macro system to the SBS in practical situations. Thus, it is challenging for the SBS to obtain the distance. To deal with this issue, we propose a median based (MB) estimator for the SBS to obtain the distance between the MBS and the MU without any backhaul link. Numerical results show that the estimation error of the MB estimator can be as small as $4\%$.

cs.IT↗