arXiv subjects

Vishnu Kumar

Publications and source records attributed to Vishnu Kumar.

7 recordsLinked to original sources

arXiv2026

Flexural Cavity Mechanics in Electrostatically Driven 1D Phononic Crystal

Phononic Crystals provide a versatile platform for controlling phonons in applications such as waveguiding, filtering, and sensing. To minimize dissipation, cavity resonators are often embedded within the bandgap of phononic crystals and integrated with suitable transduction techniques. Here, we demonstrate one-dimensional (1D) phononic transmission using electrostatic transduction, enabling the realization of high-quality mechanical oscillators. Using a double-ended tuning fork resonator embedded in a 1D phononic crystal, we observe degenerate flexural modes (in-phase and out-phase) exhibiting enhanced and comparable quality factors within the same device due to mode degeneracy. The in-phase mode, whose frequency lies inside the phononic bandgap, shows an approximately two-fold increase in quality factor compared to an anchored resonator, while this enhancement diminishes for the out-phase mode (frequency outside the bandgap) at temperatures where thermoelastic dissipation is negligible. This approach offers a promising route toward low-loss, encapsulated phononic devices for sensing and signal processing applications.

cond-mat.mes-hall↗

arXiv2026

Predicting Invoice Dilution in Supply Chain Finance with Leakage Free Two Stage XGBoost, KAN (Kolmogorov Arnold Networks), and Ensemble Models

Invoice or payment dilution is the gap between the approved invoice amount and the actual collection is a significant source of non credit risk and margin loss in supply chain finance. Traditionally, this risk is managed through the buyer's irrevocable payment undertaking (IPU), which commits to full payment without deductions. However, IPUs can hinder supply chain finance adoption, particularly among sub-invested grade buyers. A newer, data-driven methods use real-time dynamic credit limits, projecting dilution for each buyer-supplier pair in real-time. This paper introduces an AI, machine learning framework and evaluates how that can supplement a deterministic algorithm to predict invoice dilution using extensive production dataset across nine key transaction fields.

cs.AI↗

arXiv2025

Selective Parametric Amplification of Degenerate Modes in Electrostatically Transduced Coupled Beam Resonators

Parametric excitation in coupled mechanical systems has enabled advances in sensing, computation, and phonon control. The function of distinct phase modes using parametric driving remains insufficiently explored. Here, we investigate the nonlinear and parametric response of degenerate phase modes in a Double Ended Tuning Fork (DETF) resonator. Our measurements reveal pronounced nonlinearity and parametric amplification in the out-phase mode, attributed to the dominant contribution of the coupling beam, while the in-phase mode remains predominantly linear. Uniquely, we demonstrate parametric excitation through the coupling spring, enabling selective amplification and de-amplification controlled via the relative phase between harmonic and parametric drives. A parametric gain of $\sim$13 dB is achieved in the out-phase mode, with phase-dependent modulation of amplification, indicating its suitability for signal processing, logic operations, and memory elements based on degenerate modes. These results establish a new approach to exploiting mode-specific nonlinear dynamics in coupled resonators for emerging applications in sensing and phononic control.

cond-mat.mes-hall↗

arXiv2024

Synchronized Opto-Electro-Mechanical Measurements for Energy Loss Estimation in Thin-Film-Piezoelectric-on-Substrate MEMS/NEMS Devices

Piezoelectric micro-electro-mechanical systems have significant market potential owing to their superior capabilities of transduction to those of standard capacitive and piezoresistive devices. However, piezoelectric films are often lossy, which reduces the quality factor of devices and affects their performance. It is thus important to examine all sources of energy losses in such devices and accurately determine them based on experimental data. Currently used methods to quantify energy loss from different sources and the properties of materials based on experimental data are set-up for piezoelectric devices, in which energy storage and loss primarily occur in the same piezoelectric material. Moreover, such methods rely on resonance-antiresonance measurements, and thus are unsuitable for thin-film-piezoelectric-on substrate (TPoS) micro/nano devices that have i) a significant portion of energy stored in the substrate/device layer, ii) a low signal-to-noise ratio owing to either lossy piezoelectric films or low motional impedance, or iii) a larger feedthrough capacitance in addition to the internal capacitance of the piezoelectric film. In this paper, we propose a method that overcomes these challenges based on synchronized optical and electrical measurements. We develop a comprehensive physics-based model to extract all the relevant parameters for the device, including the coefficient of piezoelectric coupling, internal and feedthrough capacitance, loss tangents (dielectric, piezoelectric, and mechanical), and the contributions of different sources to the quality factor of the device. We showcase the proposed method by using a PZT-based TPoS MEMS cantilever. It can be universally applied to all piezoelectric materials and arbitrary stacks of the device layer.

physics.app-ph↗

arXiv2023

Giant electromechanical response from defective non-ferroelectric epitaxial BaTiO3 integrated on Si 100

Lead free, silicon compatible materials showing large electromechanical responses comparable to, or better than conventional relaxor ferroelectrics, are desirable for various nanoelectromechanical devices and applications. Defect-engineered electrostriction has recently been gaining popularity to obtain enhanced electromechanical responses at sub 100 Hz frequencies. Here, we report record values of electrostrictive strain coefficients (M31) at frequencies as large as 5 kHz (1.04 x 10-14 m2 per V2 at 1 kHz, and 3.87 x 10-15 m2 per V2 at 5 kHz) using A-site and oxygen-deficient barium titanate thin-films, epitaxially integrated onto Si. The effect is robust and retained even after cycling the devices >5000 times. Our perovskite films are non-ferroelectric, exhibit a different symmetry compared to stoichiometric BaTiO3 and are characterized by twin boundaries and nano polar-like regions. We show that the dielectric relaxation arising from the defect-induced features correlates very well with the observed giant electrostrictive response. These films show large coefficient of thermal expansion (2.36 x 10-5/K), which along with the giant M31 implies a considerable increase in the lattice anharmonicity induced by the defects. Our work provides a crucial step forward towards formulating guidelines to engineer large electromechanical responses even at higher frequencies in lead-free thin films.

cond-mat.mtrl-sci↗

arXiv2021

Modular Pipe Climber III with Three-Output Open Differential

The paper introduces the novel Modular Pipe Climber III with a Three-Output Open Differential (3-OOD) mechanism to eliminate slipping of the tracks due to the changing cross-sections of the pipe. This will be achieved in any orientation of the robot. Previous pipe climbers use three-wheel/track modules, each with an individual driving mechanism to achieve stable traversing. Slipping of tracks is prevalent in such robots when it encounters the pipe turns. Thus, active control of each module's speed is employed to mitigate the slip, thereby requiring substantial control effort. The proposed pipe climber implements the 3-OOD to address this issue by allowing the robot to mechanically modulate the track speeds as it encounters a turn. The proposed 3-OOD is the first three-output differential to realize the functional abilities of a traditional two-output differential.

cs.RO↗

arXiv2021

Design and Analysis of Modular Pipe Climber-III with a Multi-Output Differential Mechanism

This paper presents the design of an in-pipe climbing robot that operates using a novel `Three-output open differential'(3-OOD) mechanism to traverse complex networks of pipes. Conventional wheeled/tracked in-pipe climbing robots are prone to slip and drag while traversing in pipe bends. The 3-OOD mechanism helps in achieving the novel result of eliminating slip and drag in the robot tracks during motion. The proposed differential realizes the functional abilities of the traditional two-output differential, which is achieved the first time for a differential with three outputs. The 3-OOD mechanism mechanically modulates the track speeds of the robot based on the forces exerted on each track inside the pipe network, by eliminating the need for any active control. The simulation of the robot traversing in the pipe network in different orientations and in pipe-bends without slip shows the proposed design's effectiveness.

cs.RO↗