arXiv Science⌕ Search

arXiv subjects

Vasco Xu

Publications and source records attributed to Vasco Xu.

8 recordsLinked to original sources

HeadIO: Body-Frame Heading Decomposition for Neural Inertial Odometry on Head-Mounted Devices

Inertial odometry (IO) using only Inertial Measurement Units (IMUs) enables camera-free head tracking in head-mounted devices such as VR headsets, AR glasses, and earbuds. Prior IO methods operate in a gravity-aligned world frame, which is not yaw-equivariant. Yaw augmentation improves robustness but does not guarantee equivariance; learned equivariant layers achieve it, but EqNIO's full pipeline costs nearly 3$\times$ the FLOPs of ours. While raw body-frame IMU inputs are inherently yaw-invariant, head tilt redistributes both gravity and motion signals across device axes, making the representation tilt-variant. We propose HeadIO, which combines a body-frame heading decomposition with a bidirectional Mamba backbone for head-mounted inertial odometry. Our decomposition achieves tilt invariance by separating gravity-aligned and horizontal components using only the tilt component of device orientation. We evaluate on four head-mounted datasets and find that HeadIO improves RTE-5s by 8.1% (0.260 m $\to$ 0.239 m) over world-frame methods with learned equivariant layers on Nymeria, the largest benchmark dataset, at nearly 3$\times$ lower FLOPs and 8$\times$ fewer parameters. HeadIO achieves state-of-the-art performance on our primary metric, RTE-5s, on all Aria-glasses datasets, which natively provide body-frame semantics for our decomposition method. We further evaluate the IMU-only deployment scenario on Nymeria, where HeadIO remains state-of-the-art. We show that our method relies mainly on tilt accuracy, which can be obtained from the gravity signal; for yaw, a single-coefficient gyroscope correction removes 11.6% of the yaw error and improves RTE-5s by 2.5%, and sparse external yaw corrections (for example, one every 30 s) can improve RTE-5s by 12.0%. Our decomposition is lightweight, composes with any backbone, and is suitable for real-time deployment on head-mounted devices.

cs.CV↗

FlowAvatar: Real-Time Full-Body Avatars from Sparse Egocentric Inputs on Consumer XR Devices

Prior avatar embodiment research has studied tracking completeness (how faithfully the body, hands, and face are sensed and reproduced) and personalized appearance in isolation, each requiring specialized lab equipment. How these factors interact on consumer hardware remains an open question, because no existing system unifies body pose, face, hands, and personalized appearance on a standalone headset. We present FlowAvatar, a system enabling real-time personalized look-alike avatars with full-body pose, hand articulation, facial expression, and eye gaze tracking from sparse egocentric inputs on consumer XR devices (Meta Quest Pro). Our pose model achieves competitive spatial accuracy and state-of-the-art temporal consistency on the AMASS benchmark against prior works with comprehensive spatial and temporal losses validated through architecture and loss ablations, while running in real-time. Two user studies (N=12, N=10) provide converging evidence that tracking completeness and personalized appearance serve complementary roles: tracking completeness broadly improves perceived motion quality, while only their combination achieves positive total embodiment.

cs.CV↗

ArmPoser: Real-Time, Calibration-Free Arm Pose Estimation from Smartwatch IMU

Arm pose estimation enables applications in fitness, extended reality input, rehabilitation, and life logging. Prior smartwatch-based approaches rely on calibration poses and preprocessing pipelines that transform raw IMU measurements into standardized training formats. These steps hinder deployment in everyday settings and introduce errors due to imperfect calibration and sensor drift. We present ArmPoser, a calibration-free arm pose estimation system using a single smartwatch IMU. Our central contribution is training models directly in the reference frame native to consumer smartwatches, aligning learning with how IMU data is produced by deployed devices. By operating on device-native axes, ArmPoser removes the need for coordinate transformations, explicit alignment, and bone-offset calibration used in prior work. We further augment training with physically grounded variations in watch placement and arm morphology to account for user-specific variability. ArmPoser also includes a wear-configuration module that infers anterior or posterior forearm placement and crown orientation. We evaluate pose estimation on public benchmarks and on a 10-participant, 30-activity study using watchOS and Android smartwatches, where ArmPoser matches or exceeds calibrated baselines without any user calibration.

cs.CV↗

MARIO: Motion-Augmented Real-Time Multi-Sensor Inertial Odometry

Inertial odometry (IO) using only Inertial Measurement Units (IMUs) provides a lightweight solution for human motion tracking in augmented reality (AR) and wearable devices. Recent learning-based IO methods have improved the generalizability of inertial localization through large-scale pretraining on human motion datasets. However, these approaches remain prone to drift and noise because they do not explicitly capture human motion dynamics, especially on daily activity datasets such as Nymeria. In this work, we propose to ground inertial odometry in human kinematics through a learned IMU-inferred pose prior, which promotes physically consistent motion constraints. We integrate this pose prior into existing IO architectures and reduce positional drift by up to 36% on the challenging Nymeria dataset, which is 5x larger than datasets used in prior work. We further improve long-term performance with a sensor-fusion framework that incorporates auxiliary signals from lightweight sensors already available on commercial AR glasses, including magnetometers, barometers, and secondary IMUs. With this fusion strategy, positional drift is reduced by up to 42%, improving robustness and generalization across diverse motion conditions. Together, our results introduce a new paradigm for inertial and lightweight odometry by unifying human motion kinematics with multimodal sensing, setting a new benchmark for accurate and robust camera-less human tracking. Our website is available at https://spice-lab.org/projects/MARIO/.

cs.RO↗

SurfaceXR: Fusing Smartwatch IMUs and Egocentric Hand Pose for Seamless Surface Interactions

Mid-air gestures in Extended Reality (XR) often cause fatigue and imprecision. Surface-based interactions offer improved accuracy and comfort, but current egocentric vision methods struggle due to hand tracking challenges and unreliable surface plane estimation. We introduce SurfaceXR, a sensor fusion approach combining headset-based hand tracking with smartwatch IMU data to enable robust inputs on everyday surfaces. Our insight is that these modalities are complementary: hand tracking provides 3D positional data while IMUs capture high-frequency motion. A 21-participant study validates SurfaceXR's effectiveness for touch tracking and 8-class gesture recognition, demonstrating significant improvements over single-modality approaches.

cs.CV↗

WatchHAR: Real-time On-device Human Activity Recognition System for Smartwatches

Despite advances in practical and multimodal fine-grained Human Activity Recognition (HAR), a system that runs entirely on smartwatches in unconstrained environments remains elusive. We present WatchHAR, an audio and inertial-based HAR system that operates fully on smartwatches, addressing privacy and latency issues associated with external data processing. By optimizing each component of the pipeline, WatchHAR achieves compounding performance gains. We introduce a novel architecture that unifies sensor data preprocessing and inference into an end-to-end trainable module, achieving 5x faster processing while maintaining over 90% accuracy across more than 25 activity classes. WatchHAR outperforms state-of-the-art models for event detection and activity classification while running directly on the smartwatch, achieving 9.3 ms processing time for activity event detection and 11.8 ms for multimodal activity classification. This research advances on-device activity recognition, realizing smartwatches' potential as standalone, privacy-aware, and minimally-invasive continuous activity tracking devices.

cs.CV↗

MobilePoser: Real-Time Full-Body Pose Estimation and 3D Human Translation from IMUs in Mobile Consumer Devices

There has been a continued trend towards minimizing instrumentation for full-body motion capture, going from specialized rooms and equipment, to arrays of worn sensors and recently sparse inertial pose capture methods. However, as these techniques migrate towards lower-fidelity IMUs on ubiquitous commodity devices, like phones, watches, and earbuds, challenges arise including compromised online performance, temporal consistency, and loss of global translation due to sensor noise and drift. Addressing these challenges, we introduce MobilePoser, a real-time system for full-body pose and global translation estimation using any available subset of IMUs already present in these consumer devices. MobilePoser employs a multi-stage deep neural network for kinematic pose estimation followed by a physics-based motion optimizer, achieving state-of-the-art accuracy while remaining lightweight. We conclude with a series of demonstrative applications to illustrate the unique potential of MobilePoser across a variety of fields, such as health and wellness, gaming, and indoor navigation to name a few.

cs.HC↗

MotionTrace: IMU-based Field of View Prediction for Smartphone AR Interactions

For handheld smartphone AR interactions, bandwidth is a critical constraint. Streaming techniques have been developed to provide a seamless and high-quality user experience despite these challenges. To optimize streaming performance in smartphone-based AR, accurate prediction of the user's field of view is essential. This prediction allows the system to prioritize loading digital content that the user is likely to engage with, enhancing the overall interactivity and immersion of the AR experience. In this paper, we present MotionTrace, a method for predicting the user's field of view using a smartphone's inertial sensor. This method continuously estimates the user's hand position in 3D-space to localize the phone position. We evaluated MotionTrace over future hand positions at 50, 100, 200, 400, and 800ms time horizons using the large motion capture (AMASS) and smartphone-based full-body pose estimation (Pose-on-the-Go) datasets. We found that our method can estimate the future phone position of the user with an average MSE between 0.11 - 143.62 mm across different time horizons.

cs.HC↗