arXiv subjects

Valentin Taufour

Publications and source records attributed to Valentin Taufour.

At least 19 recordsLinked to original sources

arXiv2026

Measurements of electronic band structure in CeCoGe$_3$ by angle-resolved photoemission spectroscopy

We report a comprehensive study of the electronic structure of CeCoGe$_3$ throughout the entire Brillouin zone in the non-magnetic regime using angle-resolved photoemission spectroscopy (ARPES). The electronic structure agrees in large part with first principles calculations, including predicted topological nodal lines. Two new features in the band structure are also observed: a surface state and folded bands, the latter which is argued to originate from a unit cell reconstruction.

cond-mat.str-el↗

arXiv2025

Mesoscale variations of chemical and electronic landscape on the surface of Weyl semimetal Co$_3$Sn$_2$S$_2$ visualized by ARPES and XPS

The multiple crystalline terminations in magnetic Weyl semimetal Co$_3$Sn$_2$S$_2$ display distinct topological and trivial surface states, which have successfully been distinguished experimentally. However, a model of pure terminations is known to be inadequate because these surfaces exhibit a high degree of spatial heterogeneity and point disorder. Here we perform a spectromicroscopy study of the surface chemistry and surface electronic structure using photoemission measurements in combination with first-principles calculations of core levels. We identify an intermediate region with properties distinct from both the sulfur and tin terminations, and demonstrate that the spectral features in this region can be associated with a disordered termination with a varying density of surface tin vacancies. This work establishes heuristics for identifying variable surface disorder using photoemission, an important prerequisite to experimentally establishing the behavior of momentum-space topological surface features subject to variable surface disorder on a single cleave.

cond-mat.mtrl-sci↗

arXiv2025

Importance of anisotropic interactions for hard-axis/plane ordering of Ce-based ferromagnets

Ferromagnetic (FM) Kondo-lattice (KL) compounds often exhibit intriguing magnetic behavior driven by strong crystal electric field (CEF) anisotropy and exchange interactions. Recent studies suggest that many Ce-based and Yb-based KL ferromagnets order along the hard-axis or hard-plane determined by their CEF ground state. We performed a survey of Ce-based FM compounds, complemented with new single crystal synthesis, magnetization measurements, and analysis of the CEF scheme. Our results reveal that hard-axis/plane ordering is less common than previously reported, with most compounds ordering along their easy-axis/plane. We also find no clear correlation between the strength of the Kondo effect and whether a compound adopts hard-axis/plane or easy-axis/plane ordering. Instead, the key driver appears to be the competition between CEF anisotropy and exchange interaction anisotropy. A direct comparison of CeCuSi and CeAgSb$_2$ further indicates that antiferromagnetic (AFM) interactions along the CEF easy-axis can be crucial in stabilizing the hard-axis FM ordering observed in CeAgSb$_2$. Finally, our results suggest that an anisotropic Ruderman-Kittel-Kasuya-Yosida (RKKY) model could offer deeper insights into the complicated magnetic properties of Ce-based and other heavy-fermion systems.

cond-mat.str-el↗

arXiv2025

Nanoscale quantum imaging of field-free deterministic switching of a chiral antiferromagnet

Recently, unconventional spin-orbit torques (SOTs) with tunable spin generation open new pathways for designing novel magnetization control for cutting-edge spintronics innovations. A leading research thrust is to develop field-free deterministic magnetization switching for implementing scalable and energy favorable magnetic recording and storage applications, which have been demonstrated in conventional ferromagnetic and antiferromagnetic material systems. Here we extend this advanced magnetization control strategy to chiral antiferromagnet Mn3Sn using spin currents with out-of-plane canted polarization generated from low-symmetry van der Waals (vdW) material WTe2. Numerical calculations suggest that damping-like SOT of spins injected perpendicular to the kagome plane of Mn3Sn serves as a driving force to rotate the chiral magnetic order, while the field-like SOT of spin currents with polarization parallel to the kagome plane provides the bipolar deterministicity to the magnetic switching. We further introduce scanning quantum microscopy to visualize nanoscale evolutions of Mn3Sn magnetic domains during the field-free switching process, corroborating the exceptionally large magnetic switching ratio up to 90%. Our results highlight the opportunities provided by hybrid SOT material platforms consisting of noncollinear antiferromagnets and low-symmetry vdW spin source materials for developing next-generation, transformative spintronic logic devices.

cond-mat.mtrl-sci↗

arXiv2025

Incommensurate and commensurate antiferromagnetic orders in the kagome compound UV$_{6}$Sn$_{6}$

We report on the synthesis of single crystals of the kagome compound, UV$_6$Sn$_6$, and present the results of magnetization, electrical resistivity, heat capacity, x-ray, and neutron diffraction experiments to characterize the structure and magnetic properties. UV$_6$Sn$_6$ crystallizes in a large supercell of the HfFe$_6$Ge$_6$ parent structure with an hexagonal symmetry in which some of the U atoms are shifted by $c/2$ in an ordered fashion. Below $T_{N1}\approx$ 29 K, an incommensurate magnetic structure with a temperature-dependent wave vector $(0,0,k_z)$ is observed. Below $T_{N2}=$ 23.5 K, the wave vector locks in to $(0,0,0.5)$, forming an antiferromagnetic ground state. The U moments align along the $c$ axis retaining a large magnetic anisotropy. These findings highlight the role of the $5f$ orbitals from uranium in this structural family in driving both magnetic ordering and structural modulation and distinguish UV$_6$Sn$_6$ from its lanthanide-based analogs.

cond-mat.str-el↗

arXiv2025

Visualizing Field-free Deterministic Magnetic Switching of all-van der Waals Spin-Orbit Torque System Using Spin Ensembles in Hexagonal Boron Nitride

Recently, optically active spin defects embedded in van der Waals (vdW) crystals have emerged as a transformative quantum sensing platform to explore cutting-edge materials science and quantum physics. Taking advantage of excellent solid-state integrability, this new class of spin defects can be arranged in controllable nanoscale proximity of target materials in vdW heterostructures, showing great promise for improving spatial resolution and field sensitivity of current sensing technologies. Building on this state-of-the-art measurement platform, here we report hexagonal boron nitride-based quantum imaging of field-free deterministic magnetic switching of room-temperature two-dimensional magnet Fe3GaTe2 in an all-vdW spin-orbit torque (SOT) system. By visualizing SOT-driven variations of nanoscale Fe3GaTe2 magnetic stray field profile under different conditions, we have revealed how the observed magnetic switching evolves from deterministic to indeterministic behavior due to the interplay between out-of-plane spins, in-plane spins and Joule heating. This understanding, which is otherwise difficult to access by conventional transport measurements, offers valuable insights on material design, testing, and evaluation of next-generation vdW spintronic devices.

cond-mat.mes-hall↗

arXiv2025

Anomalous temperature-dependent magnetization in the nearly collinear antiferromagnet Y$_2$Co$_3$

Y$_2$Co$_3$ is a newly discovered antiferromagnetic (AFM) compound with distorted kagome layers. Previous investigations via bulk magnetization measurements suggested a complex noncollinear magnetic behavior, with magnetic moments primarily anti-aligned along the $b$ axis and some canting towards the $ac$ plane. In this study, we report the magnetic structure of Y$_2$Co$_3$ to be an A-type AFM structure with ferromagnetic (FM) interactions within the distorted kagome plane and an interplane antiferromagnetic interaction, as determined by single-crystal neutron diffraction. The magnetic moments align along the $b$ axis, with minimal canting towards the $c$ axis, at odds with the previous interpretation of bulk magnetization measurements. The magnetic moments on the two distinct Co sites are [0, -0.68(3), 0] $\mu_B$ and [0, 1.25(4), 0.07(1)] $\mu_B$. We attribute the previously reported "noncollinear" behavior to the considerable temperature dependence of itinerant AFM exchange interactions, induced by thermal contraction along the $b$ axis. Additionally, our examination of lattice constants through pressure studies reveals compensating effects on FM and AFM interactions, resulting in negligible pressure dependence of $T_\textrm{N}$.

cond-mat.str-el↗

arXiv2024

Pressure induced superconducting dome in LaNiGa2

LaNiGa2 is a time-reversal symmetry breaking superconductor with symmetry protected band crossings, making it an ideal platform for investigating the interplay between unconventional superconductivity and electronic structure topology. Here we present a transport study of LaNiGa2 under pressure. The application of pressure to LaNiGa2 induces a significant enhancement of the superconducting transition temperature Tc at a pressure of 7 GPa. In contrast, powder X-ray diffraction (XRD) results show no evidence of structural phase transitions up to 26.3 GPa. Moreover, the ratio of band diffusivity shows a sudden increase at around 7 GPa, suggesting possible pressure-induced changes in the electronic structure that are closely linked to the evolution of superconductivity.

cond-mat.supr-con↗

arXiv2024

Multiple metamagnetic transitions in helical antiferromagnet CeVGe$_3$

We report on neutron diffraction, magnetoresistance, magnetization, and magnetic torque measurements under high magnetic field in the helical antiferromagnet CeVGe$_3$. This compound exhibits Kondo lattice coherence and helical antiferromagnetic (AFM) ordering at ambient pressure, similar to the well-studied CeRhIn$_5$. Our measurements reveal that CeVGe$_3$ undergoes a magnetic transition from an incommensurate (ICM) AFM state to an up-up-down-down commensurate (CM) AFM structure, followed by a transition to a novel phase at higher fields. A quantum phase transition occurs around 21.3 T. This rich magnetic field phase diagram closely resembles that of CeRhIn$_5$. Furthermore, angle-dependent magnetoresistance measurements reveal that all transitions in CeVGe$_3$ occur from the field component along the $ab$ plane. These findings highlight the intricate interplay among exchange interactions, crystal field effects, ground state properties, and crystalline symmetries.

cond-mat.str-el↗

arXiv2024

Easy-plane ferromagnetic ordering and crystal-field ground state in the Kondo lattice CeCuSi

We report the successful growth of CeCuSi single crystals using a metallic flux method and the physical properties using structural, magnetic, electrical transport, optical, and heat capacity measurements. CeCuSi crystallizes in a hexagonal-bar shape, and single crystal x-ray diffraction confirms the ZrBeSi-type structure (space group $P6_{3}/mmc$). CeCuSi orders ferromagnetically below $T_\textrm{C}=15.5$ K with easy magnetization direction within the basal plane. The Ce$^{3+}$ ions are situated within a triangular lattice with a point group of $D_{3d}$. We perform a detailed crystalline electric field (CEF) analysis of the anisotropic magnetic susceptibility, the Schottky anomaly in heat capacity, and the Raman-active excitations. The results indicate a ground state doublet with magnetic moment primarily in the basal plane, and a ferromagnetic interaction along both directions. The exponential behavior in resistivity and in heat capacity below $T_\textrm{C}$ can also be well explained by the ferromagnetic magnon model. We found that CeCuSi does not exhibit the CEF hard axis ordering observed in many ferromagnetic Kondo lattice (FM-KL) compounds. Our CEF analysis suggests that the exchange interactions along both axes are ferromagnetic, potentially explaining the absence of hard-axis ordering.

cond-mat.str-el↗

arXiv2024

Superconductivity Mediated by Nematic Fluctuations in Tetragonal $\textrm{Fe}\textrm{Se}_{1-x}\textrm{S}_{x}$

Nematic phases, where electrons in a solid spontaneously break rotational symmetry while preserving the translational symmetry, exist in several families of unconventional superconductors [1, 2]. Although superconductivity mediated by nematic fluctuations is well established theoretically [3-7], it has yet to be unambiguously identified experimentally [8, 9]. A major challenge is that nematicity is often intertwined with other degrees of freedom, such as magnetism and charge order. The FeSe$_{1-x}$S$_x$ family of iron based superconductors provides a unique opportunity to explore this concept, as it features an isolated nematic phase that can be suppressed by sulfur substitution at a quantum critical point (QCP) near $x_c = 0.17$, where nematic fluctuations are the largest [10-12]. Here, we performed scanning tunneling spectroscopy measurements to visualize Boguliubov quasiparticle interference patterns, from which we determined the momentum structure of the superconducting gap near the Brillouin zone $\Gamma$ point of FeSe$_{0.81}$S$_{0.19}$. The results reveal an anisotropic, near nodal gap with minima that are $45^\circ$ rotated with respect to the Fe-Fe direction, characteristic of a nematic pairing interaction, contrary to the usual isotropic gaps due to spin mediated pairing in other tetragonal Fe-based superconductors. The results are also in contrast with pristine FeSe, where the pairing is mediated by spin fluctuations and the gap minima are aligned with the Fe-Fe direction. Therefore, the measured gap structure demonstrates not only a fundamental change of the pairing mechanism across the phase diagram of FeSe$_{1-x}$S$_x$, but it also indicates the existence of superconductivity mediated by nematic fluctuations in FeSe$_{0.81}$S$_{0.19}$.

cond-mat.supr-con↗

arXiv2023

Symmetry Enforced Fermi Surface Degeneracies Observed in Time-Reversal Symmetry-Breaking Superconductor LaNiGa$_2$

LaNiGa$_2$ is superconductor that breaks time-reversal symmetry in the superconducting state without any known nearby magnetism. Recently, single crystals of LaNiGa$_2$ have been synthesized, revealing a nonsymmorphic Cmcm space group. Here, we report measurements of the electronic structure of LaNiGa$_2$ throughout the three-dimensional Brillouin zone (BZ) using angle-resolved photoemission spectroscopy (ARPES). Our findings show broad consistency with density functional theory (DFT) calculations and provide evidence for degeneracies in the electronic structure that are predicted from the space group. The calculations also predict four Fermi surfaces which cross the purported nodal plane and should therefore form two degenerate pairs. We report evidence for those predicted symmetry enforced degeneracies as well as accidental near degeneracies throughout the BZ. These degeneracies and near-degeneracies may play a role in the pairing mechanism of LaNiGa$_2$. Our results provide insight into the interplay between structure, Fermiology, and superconductivity in unconventional superconductors with nonsymmorphic space group.

cond-mat.supr-con↗

arXiv2023

Machine Learning Predictions of High-Curie-Temperature Materials

Technologies that function at room temperature often require magnets with a high Curie temperature, $T_\mathrm{C}$, and can be improved with better materials. Discovering magnetic materials with a substantial $T_\mathrm{C}$ is challenging because of the large number of candidates and the cost of fabricating and testing them. Using the two largest known data sets of experimental Curie temperatures, we develop machine-learning models to make rapid $T_\mathrm{C}$ predictions solely based on the chemical composition of a material. We train a random forest model and a $k$-NN one and predict on an initial dataset of over 2,500 materials and then validate the model on a new dataset containing over 3,000 entries. The accuracy is compared for multiple compounds' representations ("descriptors") and regression approaches. A random forest model provides the most accurate predictions and is not improved by dimensionality reduction or by using more complex descriptors based on atomic properties. A random forest model trained on a combination of both datasets shows that cobalt-rich and iron-rich materials have the highest Curie temperatures for all binary and ternary compounds. An analysis of the model reveals systematic error that causes the model to over-predict low-$T_\mathrm{C}$ materials and under-predict high-$T_\mathrm{C}$ materials. For exhaustive searches to find new high-$T_\mathrm{C}$ materials, analysis of the learning rate suggests either that much more data is needed or that more efficient descriptors are necessary.

cond-mat.mtrl-sci↗

arXiv2023

A rule-free workflow for the automated generation of databases from scientific literature

In recent times, transformer networks have achieved state-of-the-art performance in a wide range of natural language processing tasks. Here we present a workflow based on the fine-tuning of BERT models for different downstream tasks, which results in the automated extraction of structured information from unstructured natural language in scientific literature. Contrary to existing methods for the automated extraction of structured compound-property relations from similar sources, our workflow does not rely on the definition of intricate grammar rules. Hence, it can be adapted to a new task without requiring extensive implementation efforts and knowledge. We test our data-extraction workflow by automatically generating a database for Curie temperatures and one for band gaps. These are then compared with manually-curated datasets and with those obtained with a state-of-the-art rule-based method. Furthermore, in order to showcase the practical utility of the automatically extracted data in a material-design workflow, we employ them to construct machine-learning models to predict Curie temperatures and band gaps. In general we find that, although more noisy, automatically extracted datasets can grow fast in volume and that such volume partially compensates for the inaccuracy in downstream tasks.

cond-mat.mtrl-sci↗

arXiv2022

Surface Effects on Anisotropic Photoluminescence in One-Dimensional Organic Metal Halide Hybrids

One-dimensional (1D) organic metal halide hybrids exhibit strongly anisotropic optical properties, highly efficient light emission, and large Stokes shift, holding promises for novel photodetection and lighting applications. However, the fundamental mechanisms governing their unique optical properties and in particular the impacts of surface effects are not understood. Here, we investigate 1D C4N2H14PbBr4 by polarization-dependent time-averaged and time-resolved photoluminescence (TRPL) spectroscopy, as a function of photoexcitation energy. Surprisingly, we find that the emission under photoexcitation polarized parallel to the 1D metal halide chains can be either stronger or weaker than that under perpendicular polarization, depending on the excitation energy. We attribute the excitation-energy-dependent anisotropic emission to fast surface recombination, supported by first-principles calculations of optical absorption in this material. The fast surface recombination is directly confirmed by TRPL measurements, when the excitation is polarized parallel to the chains. Our comprehensive studies provide a more complete picture for a deeper understanding of the optical anisotropy in 1D organic metal halide hybrids.

cond-mat.mtrl-sci↗

arXiv2022

Suppression of ferromagnetism governed by a critical lattice parameter in CeTiGe$\_3$ with hydrostatic pressure or V substitution

We combine structural and magnetic measurements to compare the different magnetic phase diagrams between the pressure and substitution studies in CeTiGe3. We report on the structural, magnetic, and electrical transport properties of single crystals of CeTi1-xVxGe3 (x = 0, 0.1, 0.2, 0.3, 0.4, 0.9, and 1), and of polycrystalline samples (x = 0.5, 0.6, 0.7, 0.8), as well as structural properties of CeTiGe3 under pressure up to 9 GPa. The ferromagnetic ordering in CeTiGe3 is suppressed with V doping in CeTi1-xVxGe3, and suggests a possible ferromagnetic quantum critical point near x = 0.45. We perform a detailed crystalline electric field (CEF) analysis, and the magnetic susceptibility data in pure CeTiGe3 and CeVGe3 can be well explained by the CEF model. The proposed CEF energy levels suggest that there is a gradual change of the ground state from 5/2 state in CeTiGe3 to 1/2 state in CeVGe3, and a suppression of CEF splitting energies near the quantum critical region. When hydrostatic pressure is used instead of chemical substitution, the quantum critical point is avoided by the appearance of magnetic phases above around 4.1 GPa. In the substitution study, the ferromagnetic and antiferromagnetic regions are well separated, whereas they touch in the pressure study. We observe a different trend in the temperature dependence of the resistivity maximum in both studies, suggesting that the CEF splitting energy is suppressed by V substitution but enhanced by pressure. We also observe different responses in lattice constants between the two studies, highlighting the fact that substitution effects cannot be reduced to chemical pressure effects only. Nevertheless, when the magnetic phase diagrams of both hydrostatic pressure and substitution are compared, we find a common critical lattice constant c = 5.78 A where the ferromagnetic ordering is suppressed in both studies.

cond-mat.str-el↗

arXiv2022

Copper migration and surface oxidation of $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$ in ambient pressure environments

Chemical modifications such as intercalation can be used to modify surface properties or to further functionalize the surface states of topological insulators. Using ambient pressure X-ray photoelectron spectroscopy, we report copper migration in $\text{Cu}_{x}\text{Bi}_2\text{Se}_3$, which occurs on a timescale of hours to days after initial surface cleaving. The increase in near-surface copper proceeds along with the oxidation of the sample surface and large changes in the selenium content. These complex changes are further modelled with core-level spectroscopy simulations, which suggest a composition gradient near the surface which develops with oxygen exposure. Our results shed light on a new phenomenon that must be considered for intercalated topological insulators$\unicode{x2014}$and intercalated materials in general$\unicode{x2014}$that surface chemical composition can change when specimens are exposed to ambient conditions.

cond-mat.mes-hall↗

arXiv2022

Anomalous depinning of magnetic domain walls within the ferromagnetic phase of the Weyl semimetal Co3Sn2S2

We report bulk magnetization measurements and spatially resolved measurements of magnetic domains in Co3Sn2S2 single crystals. The results indicate that a previously reported magnetic anomaly around 130 K is due to an anomalous domain wall depinning upon cooling. Our measurements also reveal a hysteresis between field-cooled-cooling (FCC) and field-cooled-warming (FCW) magnetization curves acquired under a constant magnetic field below 300 Oe. This observation rules out the possibility that the anomaly stems from a second-order phase transition. Our results further suggest that changes in the shape of hysteresis loops from 5 K to 170 K are caused by an unusual temperature-dependent domain nucleation field that changes sign around 130 K. The Kerr rotation images of the magnetic domains confirm that the domain walls depin between 120 K and 140 K.

cond-mat.mtrl-sci↗