arXiv subjects

Tue Gunst

Publications and source records attributed to Tue Gunst.

17 recordsLinked to original sources

arXiv2020

First principles evaluation of fcc ruthenium for use in advanced interconnects

As the semiconductor industry turns to alternate conductors to replace Cu for future interconnect nodes, much attention as been focused on evaluating the electrical performance of Ru. The typical hexagonal close-packed (hcp) phase has been extensively studied, but relatively little attention has been paid to the face-centered cubic (fcc) phase, which has been shown to nucleate in confined structures and may be present in tight-pitch interconnects. Using \emph{ab initio} techniques, we benchmark the performance of fcc Ru. We find that the phonon-limited bulk resistivity of the fcc Ru is less than half of that of hcp Ru, a feature we trace back to the stronger electron-phonon coupling elements that are geometrically inherited from the modified Fermi surface shape of the fcc crystal. Despite this benefit of the fcc phase, high grain boundary scattering results in increased resistivity compared to Cu-based interconnects with similar average grain size. We find, however, that the line resistance of fcc Ru is lower than that of Cu below 21 nm line width due to the conductor volume lost to adhesion and wetting liners. In addition to studying bulk transport properties, we evaluate the performance of adhesion liners for fcc Ru. We find that it is energetically more favorable for fcc Ru to bind directly to silicon dioxide than through conventional adhesion liners such as TaN and TiN. In the case that a thin liner is necessary for the Ru deposition technique, we find that the vertical resistance penalty of a liner for fcc Ru can be up to eight times lower than that calculated for conventional liners used for Cu interconnects. Our calculations, therefore, suggest that the formation of the fcc phase of Ru may be a beneficial for advanced, low-resistance interconnects.

cond-mat.mtrl-sci↗

arXiv2019

QuantumATK: An integrated platform of electronic and atomic-scale modelling tools

QuantumATK is an integrated set of atomic-scale modelling tools developed since 2003 by professional software engineers in collaboration with academic researchers. While different aspects and individual modules of the platform have been previously presented, the purpose of this paper is to give a general overview of the platform. The QuantumATK simulation engines enable electronic-structure calculations using density functional theory or tight-binding model Hamiltonians, and also offers bonded or reactive empirical force fields in many different parametrizations. Density functional theory is implemented using either a plane-wave basis or expansion of electronic states in a linear combination of atomic orbitals. The platform includes a long list of advanced modules, including Green's-function methods for electron transport simulations and surface calculations, first-principles electron-phonon and electron-photon couplings, simulation of atomic-scale heat transport, ion dynamics, spintronics, optical properties of materials, static polarization, and more. Seamless integration of the different simulation engines into a common platform allows for easy combination of different simulation methods into complex workflows. Besides giving a general overview and presenting a number of implementation details not previously published, we also present four different application examples. These are calculations of the phonon-limited mobility of Cu, Ag and Au, electron transport in a gated 2D device, multi-model simulation of lithium ion drift through a battery cathode in an external electric field, and electronic-structure calculations of the composition-dependent band gap of SiGe alloys.

cond-mat.mtrl-sci↗

arXiv2018

Efficient first-principles calculation of phonon assisted photocurrent in large-scale solar cell devices

We present a straightforward and computationally cheap method to obtain the phonon-assisted photocurrent in large-scale devices from first-principles transport calculations. The photocurrent is calculated using nonequilibrium Green's function with light-matter interaction from the first-order Born approximation while electron-phonon coupling (EPC) is included through special thermal displacements (STD). We apply the method to a silicon solar cell device and demonstrate the impact of including EPC in order to properly describe the current due to the indirect band-to-band transitions. The first-principles results are successfully compared to experimental measurements of the temperature and light intensity dependence of the open-circuit voltage of a silicon photovoltaic module. Our calculations illustrate the pivotal role played by EPC in photocurrent modelling to avoid underestimation of the open-circuit voltage, short-circuit current and maximum power. This work represents a recipe for computational characterization of future photovoltaic devices including the combined effects of light-matter interaction, phonon-assisted tunneling and the device potential at finite bias from the level of first-principles simulations.

cond-mat.mes-hall↗

arXiv2017

First-Principles Electron Transport with Phonon Coupling: Large-Scale at Low Cost

Phonon-assisted tunneling plays a crucial role for electronic device performance and even more so with future size down-scaling. We show how one can include this effect in large-scale first-principles calculations using a single "special thermal displacement" (STD) of the atomic coordinates at almost the same cost as elastic transport calculations. We apply the method to ultra-scaled silicon devices and demonstrate the importance of phonon-assisted band-to-band and source-to-drain tunneling. In a diode the phonons lead to a rectification ratio suppression in good agreement with experiments, while in an ultra-thin body transistor the phonons increase off-currents by four orders of magnitude, and the subthreshold swing by a factor of four, in agreement with perturbation theory.

cond-mat.mes-hall↗

arXiv2017

Interface band gap narrowing behind open circuit voltage losses in Cu$_2$ZnSnS$_4$ solar cells

We present evidence that band gap narrowing at the heterointerface may be a major cause of the large open circuit voltage deficit of Cu$_2$ZnSnS$_4$/CdS solar cells. Band gap narrowing is caused by surface states that extend the Cu$_2$ZnSnS$_4$ valence band into the forbidden gap. Those surface states are consistently found in Cu$_2$ZnSnS$_4$, but not in Cu$_2$ZnSnSe$_4$, by first-principles calculations. They do not simply arise from defects at surfaces but are an intrinsic feature of Cu$_2$ZnSnS$_4$ surfaces. By including those states in a device model, the outcome of previously published temperature-dependent open circuit voltage measurements on Cu$_2$ZnSnS$_4$ solar cells can be reproduced quantitatively without necessarily assuming a cliff-like conduction band offset with the CdS buffer layer. Our first-principles calculations indicate that Zn-based alternative buffer layers are advantageous due to the ability of Zn to passivate those surface states. Focusing future research on Zn-based buffers is expected to significantly improve the open circuit voltage and efficiency of pure-sulfide Cu$_2$ZnSnS$_4$ solar cells.

cond-mat.mes-hall↗

arXiv2017

Electron-phonon scattering from Green's function transport combined with Molecular Dynamics: Applications to mobility predictions

We present a conceptually simple method for treating electron-phonon scattering and phonon limited mobilities. By combining Green's function based transport calculations and molecular dynamics (MD), we obtain a temperature dependent transmission from which we evaluate the mobility. We validate our approach by comparing to mobilities and conductivies obtained by the Boltzmann transport equation (BTE) for different bulk and one-dimensional systems. For bulk silicon and gold we successfully compare against experimental values. We discuss limitations and advantages of each of the computational approaches.

cond-mat.mes-hall↗

arXiv2016

Flexural phonon scattering induced by electrostatic gating in graphene

Graphene has an extremely high carrier mobility partly due to its planar mirror symmetry inhibiting scattering by the highly occupied acoustic flexural phonons. Electrostatic gating of a graphene device can break the planar mirror symmetry yielding a coupling mechanism to the flexural phonons. We examine the effect of the gate-induced one-phonon scattering on the mobility for several gate geometries and dielectric environments using first-principles calculations based on density functional theory (DFT) and the Boltzmann equation. We demonstrate that this scattering mechanism can be a mobility-limiting factor, and show how the carrier density and temperature scaling of the mobility depends on the electrostatic environment. Our findings may explain the high deformation potential for in-plane acoustic phonons extracted from experiments and furthermore suggest a direct relation between device symmetry and resulting mobility.

cond-mat.mes-hall↗

arXiv2016

Inelastic vibrational signals in electron transport across graphene nanoconstrictions

We present calculations of the inelastic vibrational signals in the electrical current through a graphene nanoconstriction. We find that the inelastic signals are only present when the Fermi-level position is tuned to electron transmission resonances, thus, providing a fingerprint which can link an electron transmission resonance to originate from the nanoconstriction. The calculations are based on a novel first-principles method which includes the phonon broadening due to coupling with phonons in the electrodes. We find that the signals are modified due to the strong coupling to the electrodes, however, still remain as robust fingerprints of the vibrations in the nanoconstriction. We investigate the effect of including the full self-consistent potential drop due to finite bias and gate doping on the calculations and find this to be of minor importance.

cond-mat.mes-hall↗

arXiv2015

First-principles method for electron-phonon coupling and electron mobility: Applications to 2D materials

We present density functional theory calculations of the phonon-limited mobility in n-type monolayer graphene, silicene and MoS$_2$. The material properties, including the electron-phonon interaction, are calculated from first-principles. We provide a detailed description of the normalized full-band relaxation time approximation for the linearized Boltzmann transport equation (BTE) that includes inelastic scattering processes. The bulk electron-phonon coupling is evaluated by a supercell method. The method employed is fully numerical and does therefore not require a semi-analytic treatment of part of the problem and, importantly, it keeps the anisotropy information stored in the coupling as well as the band structure. In addition, we perform calculations of the low-field mobility and its dependence on carrier density and temperature to obtain a better understanding of transport in graphene, silicene and monolayer MoS$_2$. Unlike graphene, the carriers in silicene show strong interaction with the out-of-plane modes. We find that graphene has more than an order of magnitude higher mobility compared to silicene. For MoS$_2$, we obtain several orders of magnitude lower mobilities in agreement with other recent theoretical results. The simulations illustrate the predictive capabilities of the newly implemented BTE solver applied in simulation tools based on first-principles and localized basis sets.

cond-mat.mes-hall↗

arXiv2015

Manipulating the voltage drop in graphene nanojunctions using a gate potential

Graphene is an attractive electrode material to contact nanostructures down to the molecular scale since it can be gated electrostatically. Gating can be used to control the doping and the energy level alignment in the nanojunction, thereby influencing its conductance. Here we investigate the impact of electrostatic gating in nanojunctions between graphene electrodes operating at finite bias. Using first principles quantum transport simulations, we show that the voltage drop across \emph{symmetric} junctions changes dramatically and controllably in gated systems compared to non-gated junctions. In particular, for \emph{p}-type(\emph{n}-type) carriers the voltage drop is located close to the electrode with positive(negative) polarity, i.e. the potential of the junction is pinned to the negative(positive) electrode. We trace this behaviour back to the vanishing density of states of graphene in the proximity of the Dirac point. Due to the electrostatic gating, each electrode exposes different density of states in the bias window between the two different electrode Fermi energies, thereby leading to a non-symmetry in the voltage drop across the device. This selective pinning is found to be independent of device length when carriers are induced either by the gate or dopant atoms, indicating a general effect for electronic circuitry based on graphene electrodes. We envision this could be used to control the spatial distribution of Joule heating in graphene nanostructures, and possibly the chemical reaction rate around high potential gradients.

cond-mat.mes-hall↗

arXiv2013

Efficient calculation of inelastic vibration signals in electron transport: Beyond the wide-band approximation

We extend the simple and efficient lowest order expansion (LOE) for inelastic electron tunneling spectroscopy (IETS) to include variations in the electronic structure on the scale of the vibration energies. This enables first-principles calculations of IETS lineshapes for molecular junctions close to resonances and band edges. We demonstrate how this is relevant for the interpretation of experimental IETS using both a simple model and atomistic first-principles simulations.

cond-mat.mes-hall↗

arXiv2013

Phonon excitation and instabilities in biased graphene nanoconstrictions

We calculate the phonons in a graphene nanoconstriction(GNC) in the presence of a high current density. The Joule-heating, current-induced forces, and coupling to electrode phonons is evaluated using first principles nonequilibrium DFT-NEGF calculations. Close to a resonance in the electronic structure we observe a strongly nonlinear heating with bias and breakdown of the harmonic approximation. This behavior results from negatively damped phonons driven by the current. The effect may limit the stability and capacity of graphene nanoconstrictions to carry high currents.

cond-mat.mes-hall↗

arXiv2013

Electronic and transport properties of kinked graphene

Local curvature, or bending, of a graphene sheet is known to increase the chemical reactivity presenting an opportunity for templated chemical functionalization. Using first principles calculations based on density functional theory (DFT) we investigate the reduction of the reaction barrier for adsorption of atomic hydrogen at linear bends in graphene. We find a significant lowering (15%) for realistic radii of curvature (20 {\AA}), and that adsorption along the linear bend leads to a stable linear kink. We compute the electronic transport properties of individual and multiple kink-lines, and demonstrate how these act as efficient barriers for electron transport. In particular, two parallel kink-lines form a graphene pseudo-nanoribbon structure with a semi-metallic/semi-conducting electronic structure closely related to the corresponding isolated ribbons; the ribbon band gap translates into a transport gap for transport across the kink lines. We finally consider pseudo-ribbon based heterostructures, and propose that such structures present a novel approach for band gap engineering in nanostructured graphene.

cond-mat.mtrl-sci↗

arXiv2012

Graphene antidot lattice waveguides

We introduce graphene antidot lattice waveguides: nanostructured graphene where a region of pristine graphene is sandwiched between regions of graphene antidot lattices. The band gap in the surrounding antidot lattices enable localized states to emerge in the central waveguide region. We model the waveguides via a position-dependent mass term in the Dirac approximation of graphene, and arrive at analytical results for the dispersion relation and spinor eigenstates of the localized waveguide modes. To include atomistic details we also use a tight-binding model, which is in excellent agreement with the analytical results. The waveguides resemble graphene nanoribbons, but without the particular properties of ribbons that emerge due to the details of the edge. We show that electrons can be guided through kinks without additional resistance and that transport through the waveguides is robust against structural disorder.

cond-mat.mes-hall↗

arXiv2012

Thermoelectric properties of disordered graphene antidot devices

We calculate the electronic and thermal transport properties of devices based on finite graphene antidot lattices (GALs) connected to perfect graphene leads. We use an atomistic approach based on the $\pi$-tight-binding model, the Brenner potential, and employing recursive Green's functions. We consider the effect of random disorder on the electronic and thermal transport properties, and examine the potential gain of thermoelectric merit by tailoring of the disorder. We propose several routes to optimize the transport properties of the GAL systems. Finally, we illustrate how quantum thermal transport can be addressed by molecular dynamics simulations, and compare to the Green's function results for the GAL systems in the ballistic limit.

cond-mat.mes-hall↗

arXiv2011

Current-induced dynamics in carbon atomic contacts

The effect of electronic current on the atomic motion still poses many open questions, and several mechanisms are at play. Recently there has been focus on the importance of the current-induced non-conservative forces (NC) and Berry-phase derived forces (BP) regarding the stability of molecular-scale contacts. Systems based on molecules bridging electrically gated graphene electrodes may offer an interesting test-bed for these effects. We employ a semi-classical Langevin approach in combination with DFT calculations to study the current-induced vibrational dynamics of an atomic carbon chain connecting electrically gated graphene electrodes. This illustrates how the device stability can be predicted solely from the modes obtained from the Langevin equation including the current induced forces. We point out that the gate offers control of the current independent of bias voltage which can be used to explore current-induced vibrational instabilities due the NC/BP forces. Furthermore, using tight-binding and the Brenner potential we illustrate how Langevin-type molecular dynamics can be performed including the Joule heating effect for the carbon chain systems. Molecular dynamics including current-induced forces enables an energy redistribution mechanism among the modes, mediated by anharmonic interactions, which is found to be vital in the description of the electronic heating. We have developed a semi-classical Langevin equation approach which can be used to explore current-induced dynamics and instabilities. We find instabilities at experimentally relevant bias and gate voltages for the carbon chain system.

cond-mat.mes-hall↗

arXiv2011

Thermoelectric properties of finite graphene antidot lattices

We present calculations of the electronic and thermal transport properties of graphene antidot lattices with a finite length along the transport direction. The calculations are based on a single orbital tight-binding model and the Brenner potential. We show that both electronic and thermal transport properties converge fast toward the bulk limit with increasing length of the lattice: only a few repetitions (~6) of the fundamental unit cell are required to recover the electronic band gap of the infinite lattice as a transport gap for the finite lattice. We investigate how different antidot shapes and sizes affect the thermoelectric properties. The resulting thermoelectric figure of merit, ZT, can exceed 0.25, and it is highly sensitive to the atomic arrangement of the antidot edges. Specifically, hexagonal holes with pure zigzag edges lead to an order-of-magnitude smaller ZT as compared to pure armchair edges. We explain this behavior as a consequence of the localization of states, which predominantly occurs for zigzag edges, and of an increased splitting of the electronic minibands, which reduces the power factor.

cond-mat.mes-hall↗