arXiv subjects

Tomás A. Arias

Publications and source records attributed to Tomás A. Arias.

17 recordsLinked to original sources

arXiv2026

From Atomistic Impurity Landscapes to Two-Level-System Distributions and Microwave Loss: Hydrogen-Induced Losses in Nb$_2$O$_{5-δ}$ and Ta$_2$O$_{5-δ}$

We introduce a first-principles-guided framework for predicting statistical TLS distributions from mobile impurities in disordered materials. Machine-learned interatomic potentials, with DFT and minimum-action-path validation, connect impurity landscapes to tunnel-splitting and asymmetry distributions, TLS densities, and dielectric loss. Applied to amorphous Nb$_2$O$_{5-δ}$ and Ta$_2$O$_{5-δ}$, the framework implicates interstitial hydrogen as a source of microwave loss. Loss tangents match Nb-pentoxide measurements at inferred H concentrations, while weaker H uptake in Ta reproduces the Nb/Ta TLS contrast.

cond-mat.supr-con↗

arXiv2026

A locally ab initio computational framework for arbitrary incommensurate materials interfaces

Incommensurate materials interfaces constitute a broad and technologically important class of systems, yet their lack of shared periodicity limits predictive and computationally efficient first-principles electronic-structure methods. Here we introduce a scalable computational framework for constructing locally ab initio electronic Hamiltonians for arbitrary materials interfaces. Our approach exploits the nearsightedness of Wannier Hamiltonian matrix elements, enabling their systematic extrapolation and interpolation across interlayer registries. This strategy yields transferable Hamiltonians that retain first-principles accuracy while bypassing the need for prohibitively large commensurate supercells or Moiré approximations. We validate the framework on quasicrystalline 30° twisted bilayer graphene, reproducing experimentally observed spectral features including mirrored Dirac cones and minigaps at avoided crossings arising from generalized interlayer scattering. We further predict quasiperiodic flat-band states in experimentally accessible doping regimes. By enabling predictive electronic-structure calculations across structurally incommensurate interfaces, this framework establishes a practical route to first-principles exploration of emergent interfacial phenomena.

cond-mat.mtrl-sci↗

arXiv2026

Reversible Superdense Ordering of Tetragonal Lithium in a Layered Material

Understanding lithium (Li) ordering and dynamics is foundational in energy storage. X-ray based experimental methods do not simultaneously provide atomic structure information together with chemical composition and local bonding information for lithium in solids. Here we employ scanning transmission electron microscopy (STEM) and combine imaging, spectroscopy, and diffraction within a single experiment, to observe, in situ, an all-solid-state electrochemical cell. By integrating multimodal STEM with other complementary techniques, we report a complete mapping of lithium intercalation in a layered system, LaTe3. We identify three ordered phases of LixLaTe3 with x ranging from 1/3 to 3 with in-plane strain of up to 5%. At a very high lithium concentration of Li3LaTe3, we discover an unexpected three-layer, superdense lithium phase with tetragonal symmetry occupying the van der Waals gap. This represents a new Li phase that is reversible. Our multimodal approach thus enables complete tracking of lithium ordering and dynamics, important for next-generation energy storage applications.

cond-mat.mtrl-sci↗

arXiv2026

Active-Learning Inspired $\textit{Ab Initio}$ Theory-Experiment Loop Approach for Management of Material Defects: Application to Superconducting Qubits

Surface oxides are associated with two-level systems (TLSs) that degrade the performance of niobium-based superconducting quantum computing devices. To address this, we introduce a predictive framework for selecting metal capping layers that inhibit niobium oxide formation. Using DFT-calculated oxygen interstitial and vacancy energies as thermodynamic descriptors, we train a logistic regression model on a limited set of experimental outcomes to successfully predict the likelihood of oxide formation beneath different capping materials. This approach identifies Zr, Hf, and Ta as effective diffusion barriers. Our analysis further reveals that the oxide formation energy per oxygen atom serves as an excellent standalone descriptor for predicting barrier performance. By combining this new descriptor with lattice mismatch as a secondary criterion to promote structurally coherent interfaces, we identify Zr, Ta, and Sc as especially promising candidates. This closed-loop strategy integrates first-principles theory, machine learning, and limited experimental data to enable rational design of next-generation materials.

cond-mat.mtrl-sci↗

arXiv2025

Low barrier ZrO$_x$-based Josephson junctions

The Josephson junction is a crucial element in superconducting devices, and niobium is a promising candidate for the superconducting material due to its large energy gap relative to aluminum. AlO$_x$ has long been regarded as the highest quality oxide tunnel barrier and is often used in niobium-based junctions. Here we propose ZrO$_x$ as an alternative tunnel barrier material for Nb electrodes. We theoretically estimate that zirconium oxide has excellent oxygen retention properties and experimentally verify that there is no significant oxygen diffusion leading to NbO$_x$ formation in the adjacent Nb electrode. We develop a top-down, subtractive fabrication process for Nb/Zr-ZrO$_x$/Nb Josephson junctions, which enables scalability and large-scale production of superconducting electronics. Using cross sectional scanning transmission electron microscopy, we experimentally find that depending on the Zr thickness, ZrO$_x$ tunnel barriers can be fully crystalline with chemically abrupt interfaces with niobium. Further analysis using electron energy loss spectroscopy reveals that ZrO$_x$ corresponds to tetragonal ZrO$_2$. Room temperature characterization of fabricated junctions using Simmons' model shows that ZrO$_2$ exhibits a low tunnel barrier height, which is promising in merged-element transmon applications. Low temperature transport measurements reveal sub-gap structure, while the low-voltage sub-gap resistance remains in the megaohm range.

cond-mat.supr-con↗

arXiv2024

$\textit{Ab initio}$ electron-phonon coupling theory of elastic helium atom scattering

We propose a fully $ \textit{ab initio} $ approach to predicting thermal attenuation in elastic helium atom scattering amplitudes, validated through strong agreement with experiments on Nb(100) and (3$\times$1)-O/Nb(100) surfaces. Our results reveal the relative contributions from bulk, resonant, and surface phonon modes, as well as from different surface mode polarizations, providing insights into differences between smooth and corrugated surfaces. These findings advance understanding of surface dynamics and electron-phonon coupling, laying groundwork for future studies on surface superconductivity.

cond-mat.mtrl-sci↗

arXiv2024

Unmasking charge transfer in the Misfits: ARPES and ab initio prediction of electronic structure in layered incommensurate systems without artificial strain

Common belief is that the large band shifts observed in incommensurate misfit compounds, e.g. (LaSe)1.14(NbSe2)2, are due to interlayer charge transfer. In contrast, our analysis, based on both ARPES measurements and a specialized ab initio framework employing only quantities well defined in incommensurate materials, demonstrates that the large band shifts instead reflect changes in valence band hybridization and interlayer bonding. The strong alignment of our ab initio predictions and ARPES measurements confirms our understanding of the incommensurate electronic structure and charge transfer.

cond-mat.mtrl-sci↗

arXiv2023

A fully ab initio approach to inelastic atom-surface scattering

We introduce a fully ab initio theory for inelastic scattering of any atom from any surface exciting single phonons, and apply the theory to helium scattering from Nb(100). The key aspect making our approach general is a direct first-principles evaluation of the scattering atom-electron vertex. By correcting misleading results from current state-of-the-art theories, this fully ab initio approach will be critical in guiding and interpreting experiments that adopt next-generation, non-destructive atomic beam scattering.

cond-mat.mtrl-sci↗

arXiv2023

The Oxygen Reduction Pathway for Spinel Metal Oxides in Alkaline Media: An Experimentally Supported Ab Initio Study

Precious-metal-free spinel oxide electrocatalysts are promising candidates for catalyzing the oxygen reduction reaction (ORR) in alkaline fuel cells. In this theory-driven study, we use joint density-functional theory in tandem with supporting electrochemical measurements to identify a novel theoretical pathway for the ORR on cubic Co3O4 nanoparticle electrocatalysts. This pathway aligns more closely with experimental results than previous models. The new pathway employs the cracked adsorbates *(OH)(O) and *(OH)(OH), which, through hydrogen bonding, induce spectator surface *H. This results in an onset potential closely matching experimental values, in stark contrast to the traditional ORR pathway, which keeps adsorbates intact and overestimates the onset potential by 0.7 V. Finally, we introduce electrochemical strain spectroscopy (ESS), a groundbreaking strain analysis technique. ESS combines ab initio calculations with experimental measurements to validate proposed reaction pathways and pinpoint rate-limiting steps.

cond-mat.mtrl-sci↗

arXiv2023

Multimodal Operando X-ray Mechanistic Studies of a Bimetallic Oxide Electrocatalyst in Alkaline Media

Furthering the understanding of the catalytic mechanisms in the oxygen reduction reaction (ORR) is critical to advancing and enabling fuel cell technology. In this work, we use multimodal operando synchrotron X-ray diffraction (XRD) and resonant elastic X-ray scattering (REXS) to investigate the interplay between the structure and oxidation state of a Co-Mn spinel oxide electrocatalyst, which has previously shown ORR activity that rivals Pt in alkaline fuel cells. During cyclic voltammetry, the electrocatalyst exhibited a reversible and rapid increase in tensile strain at low potentials, suggesting robust structural reversibility and stability of Co-Mn oxide electrocatalysts during normal fuel cell operating conditions. At low potential holds, exploring the limit of structural stability, an irreversible tetragonal-to-cubic phase transition was observed, which may be correlated to reduction in both Co and Mn valence states. Meanwhile, joint density-functional theory (JDFT) calculations provide insight into how reactive adsorbates induce strain in spinel oxide nanoparticles. Through this work, strain and oxidation state changes that are possible sources of degradation during the ORR in Co-Mn oxide electrocatalysts are uncovered, and the unique capabilities of combining structural and chemical characterization of electrocatalysts in multimodal operando X-ray studies are demonstrated.

cond-mat.mtrl-sci↗

arXiv2022

Extending the Use of Information Theory in Segregation Analyses to Construct Comprehensive Models of Segregation

The traditional approach to the quantitative study of segregation is to employ indices that are selected by ``desirable properties''. Here, we detail how information theory underpins entropy-based indices and demonstrate how desirable properties can be used to systematically construct models of segregation. The resulting models capture all indices which satisfy the selected properties and provide new insights, such as how the entropy index presumes a particular form of intergroup interactions and how the dissimilarity index depends on the regional composition. Additionally, our approach reveals that functions, rather than indices, tend to be necessary mathematical tools for a comprehensive quantification of segregation. We then proceed with exploratory considerations of two-group residential segregation, finding striking similarities in major U.S. cities, subtle segregation patterns that correlate with minority group diversity, and substantive reductions in segregation that may be overlooked with traditional approaches. Finally, we explore the promise of our approach for segregation forecasting.

physics.soc-ph↗

arXiv2022

Theory of Nb-Zr Alloy Superconductivity and First Experimental Demonstration for Superconducting Radio-Frequency Cavity Applications

Niobium-zirconium (Nb-Zr) alloy is an old superconductor that is a promising new candidate for superconducting radio-frequency (SRF) cavity applications. Using density-functional and Eliashberg theories, we show that addition of Zr to a Nb surface in small concentrations increases the critical temperature $T_c$ and improves other superconducting properties. Furthermore, we calculate $T_c$ for Nb-Zr alloys across a broad range of Zr concentrations, showing good agreement with the literature for disordered alloys as well as the potential for significantly higher $T_c$ in ordered alloys near 75%Nb/25%Zr composition. We provide experimental verification on Nb-Zr alloy samples and SRF sample test cavities prepared with either physical vapor or our novel electrochemical deposition recipes. These samples have the highest measured $T_c$ of any Nb-Zr superconductor to date and indicate a reduction in BCS resistance compared to the conventional Nb reference sample; they represent the first steps along a new pathway to greatly enhanced SRF performance. Finally, we use Ginzburg-Landau theory to show that the addition of Zr to a Nb surface increases the superheating field $B_{sh}$, a key figure of merit for SRF which determines the maximum accelerating gradient at which cavities can operate.

cond-mat.supr-con↗

arXiv2020

$\textit{Ab Initio}$ Theory of the Impact from Grain Boundaries and Substitutional Defects on Superconducting Nb$_3$Sn

Grain boundaries play a critical role in applications of superconducting Nb$_3$Sn: in dc applications, grain boundaries preserve the material's inherently high critical current density by pinning flux, while in ac applications grain boundaries can provide weak points for flux entry and lead to significant dissipation. We present the first $\textit{ab initio}$ study to investigate the physics of different boundary types in Nb$_3$Sn using density functional theory. We identify an energetically favorable selection of tilt and twist grain boundaries of distinct orientations. We find that clean grain boundaries free of point defects reduce the Fermi-level density of states by a factor of two, an effect that decays back to the bulk electronic structure $\sim1-1.5$ nm from the boundary. We further calculate the binding free-energies of tin substitutional defects to multiple boundaries, finding a strong electronic interaction that extends to a distance comparable to that of the reduction of density of states. Associated with this interaction, we discover a universal trend in defect electronic entropies near a boundary. We probe the effects of defect segregation on grain boundary electronic structure and calculate the impact of substitutional impurities on the Fermi-level density of states in the vicinity of a grain boundary, finding that titanium and tantalum have little impact regardless of placement, whereas tin, copper, and niobium defects each have a significant impact but only on sites away from the boundary core. Finally, we consider how all of these effects impact the local superconducting transition temperature $T_\textrm{c}$ as a function of distance from the boundary plane.

cond-mat.mtrl-sci↗

arXiv2019

$\textit{Ab Initio}$ Study of Antisite Defects in Nb$_3$Sn: Phase Diagram and Impact on Superconductivity

Antisite defects play a critical role in Nb$_3$Sn superconducting radio frequency (SRF) cavity physics. Such defects are the primary form of disorder in Nb$_3$Sn, and are responsible for stoichiometry variations, including experimentally observed tin-depleted regions within grains and tin-rich regions around grain boundaries. But why they cluster to form regions of different stoichiometries and how they affect the SRF properties of Nb$_3$Sn cavities are not fully understood. Using $\textit{ab initio}$ techniques, we calculate the A15 region of the Nb-Sn phase diagram, discuss a possible modification to the phase diagram near grain boundaries, and calculate $T_c$ as a function of stoichiometry, including experimentally inaccessible tin-rich stoichiometry. We find that the impact of antisite defects on the density of states near the Fermi-level of Nb$_3$Sn plays a key role in determining many of their properties. These results improve our understanding of the obstacles facing Nb$_3$Sn SRF systems, and how modified growth processes might overcome them.

cond-mat.supr-con↗

arXiv2013

Nanoscale Imaging of Lithium Ion Distribution During In Situ Operation of Battery Electrode and Electrolyte

A major challenge in the development of new battery materials is understanding their fundamental mechanisms of operation and degradation. Their microscopically inhomogeneous nature calls for characterization tools that provide operando and localized information from individual grains and particles. Here we describe an approach that images the nanoscale distribution of ions during electrochemical charging of a battery in a transmission electron microscope liquid flow cell. We use valence energy-loss spectroscopy to track both solvated and intercalated ions, with electronic structure fingerprints of the solvated ions identified using an ab initio non-linear response theory. Equipped with the new electrochemical cell holder, nanoscale spectroscopy and theory, we have been able to determine the lithiation state of a LiFePO4 electrode and surrounding aqueous electrolyte in real time with nanoscale resolution during electrochemical charge and discharge. We follow lithium transfer between electrode and electrolyte and observe charging dynamics in the cathode that differ among individual particles. This technique represents a general approach for the operando nanoscale imaging of electrochemically active ions in a wide range of electrical energy storage systems.

physics.chem-ph↗

arXiv2012

Framework for solvation in quantum Monte Carlo

Employing a classical density-functional description of liquid environments, we introduce a rigorous method for the diffusion quantum Monte Carlo calculation of free energies and thermodynamic averages of solvated systems that requires neither thermodynamic sampling nor explicit solvent electrons. We find that this method yields promising results and small convergence errors for a set of test molecules. It is implemented readily and is applicable to a range of challenges in condensed matter, including the study of transition states of molecular and surface reactions in liquid environments.

physics.comp-ph↗

arXiv2010

Structural phase transitions in Ruddlesden-Popper phases of strontium titanate: {\em ab initio} and inhomogeneous Ginzburg-Landau approaches

We present the first systematic {\em ab initio} study of anti-ferrodistortive (AFD) order in Ruddlesden-Popper (RP) phases of strontium titanate, Sr$_{1+n}$Ti$_n$O$_{3n+1}$, as a function of both compressive epitaxial strain and phase number $n$. We find all RP phases to exhibit AFD order under a significant range of strains, recovering the bulk AFD order as $\sim 1/n^2$. A Ginzburg-Landau Hamiltonian generalized to include inter-octahedral interactions reproduces our {\em ab initio} results well, opening a pathway to understanding other nanostructured perovskite systems.

physics.comp-ph↗