arXiv Science⌕ Search

arXiv subjects

Tom Wauters

Publications and source records attributed to Tom Wauters.

3 recordsLinked to original sources

Analysis of Solid Boron Injection for ITER

Since ITER will now operate with a full tungsten divertor and first wall, the ITER Organization is considering boron wall conditioning schemes to getter oxygen and reduce tungsten sputtering to avoid excessive radiation to ensure that ITER can reach and sustain high- performance plasma operation. ITER has adopted Glow Discharge Boronization (GDB) in deuterated diborane (B$_2$D$_6$) as its main technique, which can only be performed in the absence of magnetic fields, but has also requested a study to determine how effective solid boron injection (SBI), which can be performed during plasma operation, using either an Impurity Powder Dropper (IPD) or a boron pellet injector, might be as a risk mitigation to achieving Q=10. Solid impurity injection has been used for decades as a wall conditioning technique on numerous tokamaks and stellarators around the world. The study presented here begins to assess SBI on ITER by first quantifying the boron source term across a particle size scan from 1 $μ$m to 5 mm diameter and an injection velocity scan from 5 -- 200 m/s for several ITER plasma conditions: 1) Start of Research Operations (SRO) diverted L-mode, 2) Q=10 H-mode, and 3) low plasma current and low power limiter operation. Modeling of the ablation, transport, erosion and redeposition of solid boron is being carried out with the Dust Injection Simulator (DIS), the Neutral Gas Shielding (NGS), EMC3-EIRENE and WallDYN3D models. In the first steps presented here, the DIS and NGS models are compared for calculating the boron source term that is then used as input to EMC3-EIRENE and will later be used with WallDYN3D.

physics.plasm-ph↗

RF-Specific Tungsten Erosion and Global Transport in ITER under Neon Seeding

Ion cyclotron radio-frequency heating (ICRH) is a key auxiliary heating system in ITER, but high-power RF operation can enhance plasma-material interactions through rectified RF sheath potentials on antenna structures and nearby plasma-facing components. We present the first predictive application of the STRIPE (Simulated Transport of RF Impurity Production and Emission) framework to assess RF sheath-driven tungsten (W) erosion and global impurity transport from the ITER ICRH antenna under ITER-relevant neon-seeded conditions. STRIPE couples SOLPS-ITER plasma backgrounds, full-wave RF sheath calculations, geometry-specific ion energy-angle distributions, sputtering physics, and three-dimensional impurity transport. Simulations predict RF sheath potentials of 1 to 3 kV on antenna limiter sidewalls, increasing gross W erosion by about a factor of 64 relative to thermal sheath conditions and producing a gross source of 3.34e18 W atoms per second. Erosion is governed by RF-modified ion energy-angle distributions together with local plasma flux rather than sheath voltage alone. About 10 percent of sputtered W is locally redeposited, giving a net source of 3.01e18 W atoms per second. The RF-induced antenna source remains about three orders of magnitude smaller than the thermal divertor source and more than two orders of magnitude smaller than the integrated thermal main-chamber source. After 100 ms, about 22 percent of the mobile W inventory resides within the SOLPS-covered confined-plasma region, corresponding to an annular W concentration of 1.70e-6. These results indicate that the ITER ICRH antenna is unlikely to dominate the total W source budget under the conditions considered and demonstrate the need for coupled modeling of RF waves, sheaths, sputtering, redeposition, and global impurity transport.

physics.plasm-ph↗

Hydrogen Inventory Simulations for PFCs (HISP)

Hydrogen Inventory Simulations for Plasma facing components (HISP) is an open-source simulation tool to model the evolution of hydrogen (H) isotopes inventory in plasma-facing-components (PFCs) of magnetic confinement fusion devices. The objective was to produce a demonstrative study describing the efficiency of tritium (T) removal strategies in ITER. HISP transforms plasma code outputs to spatial-averaged inputs along ITER's first wall (FW) and divertor for 1D H transport models using FESTIM. Exposure conditions were tested in three scenarios that included DT operation and varied T removal methods. Generally, DT operation resulted in $\approx$ \SI{35}{g} of T in FW and divertor components after 10 days of DT pulses. Almost \SI{80}{\%} of the total T inventory resided in co-deposited boron layers in the divertor. Baking proved to be the most effective T removal method in the divertor, decreasing T inventory by almost \SI{88}{\%} for tungsten and almost \SI{30}{\%} for boron. T removal was also evaluated from Glow Discharge Conditioning (GDC) - with a peak efficiency of \SI{23}{\%} in the tungsten FW - and low power deuterium (DD) pulses - with a peak efficiency of \SI{13}{\%} in the entire divertor. Due to the high removal efficiency of baking, inclusion of GDC and DD pulses in the tested scenarios did not meaningfully change final T inventory values, which varied by less than \SI{2}{\%} in the FW and \SI{10}{\%} in the divertor between scenarios.

physics.plasm-ph↗