arXiv subjects

Toby Bi

Publications and source records attributed to Toby Bi.

At least 19 recordsLinked to original sources

arXiv2026

Twin-photon generation in a silicon nitride microresonator

Photonic chips with silicon nitride ($\mathrm{Si_3N_4}$) microring resonators are well established as heralded single-photon sources, but their operation as frequency-degenerate twin-photon sources has not previously been demonstrated. Here, we realise a twin-photon source at telecommunication wavelengths in a $\mathrm{Si_3N_4}$ ring microresonator via an inverse four-wave mixing (FWM) process, in which two photons from spectrally distinct pumps are converted into a pair of identical twin photons. The measurements show a maximum coincidence-to-accidental ratio (CAR) of $5.4\pm0.6$. In addition, the microresonator functions as a heralded single-photon source through pump-degenerate spontaneous four-wave mixing (SFWM), exhibiting a spectral purity of $P=0.67\pm0.05$ and a heralded anti-bunching of $g^{(2)}_h(0)=0.0042\pm0.0015$. Together, these results demonstrate both photon-generation schemes on a single integrated $\mathrm{Si_3N_4}$ platform, highlighting its potential for scalable, tailored quantum light generation.

physics.optics↗

arXiv2026

Toward nanophotonic platforms for solid-state $^{229}$Th nuclear clocks

While the $^{229}$Th nuclear isomer has recently been observed and laser-excited, converting optical nuclear manipulation into a chip-scale solid-state frequency standard remains an open challenge. Here, we present a nanophotonic platform to realize an all-solid-state nuclear clock based on the low-energy isomeric transition of $^{229}$Th embedded in high-$Q$ fluoride photonic resonators. By coupling ensembles of thorium nuclei to confined optical modes, we show that resonant field build-up in the cavity can substantially enhance the nuclear excitation rate, enabling optical interrogation at practical laser intensities. We model the nuclei-photon interaction dynamics and outline a technological roadmap toward addressing this challenge, including resonator fabrication in fluoride crystals, thorium implantation, nuclear excitation with integrated lasers, and on-chip detection of vacuum-ultraviolet photons. As an initial proof of concept, we implant a crystalline fluoride whispering-gallery-mode resonator with $^{229}$Th and assess the impact of implantation-induced damage on resonator performance. Our platform leverages recent advances in materials integration and nanophotonics to chart a realistic route toward compact and scalable nuclear frequency standards.

physics.optics↗

arXiv2026

Fourth-harmonic UV light generation in integrated silicon nitride microresonators

Integrated silicon nitride (Si3N4) resonators have emerged as a leading platform for nonlinear photonics, yet generating light at wavelength in the ultraviolet (UV) has remained elusive in single-resonator systems. Here we report the first observation of fourth-harmonic generation reaching the blue and ultraviolet spectral regions in an integrated Si3N4 microring resonator. We systematically investigate the input-power dependence of the wavelength ranges supporting second-, third-, and fourth-harmonic generation, and study the input-power-dependent variation of the circulating fourth-harmonic signal in the UV. These results extend the operational bandwidth of integrated Si3N4 nonlinear photonic platforms to the lower edge of the material transparency window, enabling on-chip UV frequency conversion. Near-ultraviolet generation around 400 nm will enable on-chip excitation of defect-based quantum emitters in hexagonal boron nitride, enhance Raman spectroscopy through increased scattering cross-sections at shorter wavelengths, and support compact fluorescence-based bio-imaging platforms exploiting intrinsic cellular fluorophores.

physics.optics↗

arXiv2026

Color symmetry breaking in a nonlinear optical microcavity

Spontaneous symmetry breaking leads to diverse phenomena across the natural sciences, from the Higgs mechanism in particle physics to superconductors and collective animal behavior. In photonic systems, the symmetry of light states can be broken when two optical fields interact through the Kerr nonlinearity, as shown in early demonstrations with counterpropagating and cross-polarized modes. Here, we report the first observation of color symmetry breaking in an integrated silicon nitride microring, where spontaneous power imbalance arises between optical mode at different wavelengths, mediated by the Kerr effect. The threshold power for this effect is as low as 19 mW. By examining the system's homogeneous states, we further demonstrate a Kerr-based nonlinear activation-function generator that produces sigmoid-, quadratic-, and leaky-ReLU-like responses. These findings reveal previously unexplored nonlinear dynamics in dual-pumped Kerr resonators and establish new pathways towards compact, all-optical neuromorphic circuits.

physics.optics↗

arXiv2025

Scattering Induced Mode Chirality in Ring Resonators

Non-Hermitian physics can be used to break time reversal symmetry and is important for interactions in a wide range of systems, from active matter and neural networks to metamaterials and non-equilibrium thermodynamics. In integrated photonic devices, non-Hermitian physics can be used for direction-dependent light propagation, reconfigurable light paths, selective energy localization and optical isolators. In this work, we report previously unexplored direction-dependent mode splitting in ring microresonators, achieved by adding multiple scatterers around the cavity. Through experiments, simulations, and theoretical modeling, we unveil the underlying physics that changes the resonance shapes in resonant systems with backscattering. By engineering the spatial configuration of the scatterers, we can produce a predictable and repeatable direction-dependent mode splitting, enabling new ways to route light through optical resonators and photonic networks. In addition, the direction dependent mode-splitting can be used for precise near-field measurements, enhancing traditional sensing in integrated photonic chips.

physics.optics↗

arXiv2025

Visualization of nonlinear optics in a microresonator

A precise understanding of nonlinear optical phenomena in whispering gallery mode (WGM) microresonators is crucial for developing next-generation integrated photonic devices. Applications include on-chip sensors for biomedical use, optical memories for all-optical networks and frequency combs for optical clocks. However, our ability to spatially localize nonlinear optical processes within microresonators has been limited because optical feedback is often only collected through a bus waveguide. In this study, we present the direct visualization of nonlinear optical processes using scattering patterns captured by a short-wave infrared (SWIR) camera. Through systematic analysis of these scattering patterns, we can distinguish between different nonlinear effects occurring within the microresonator. Direct imaging of nonlinear processes in microresonators can significantly impact many applications, including the optimization of soliton frequency combs, real-time debugging of photonic circuits, microresonator-based memories, and chip-based data switching in telecom circuits.

physics.optics↗

arXiv2025

Simplified Aluminum Nitride Processing for Low-Loss Integrated Photonics and Nonlinear Optics

Aluminum nitride (AlN) is an extremely promising material for integrated photonics because of the combination of strong \c{hi}2 and \c{hi}3 nonlinearities. However, the intrinsic hardness of the material and charging effects during electron beam lithography make AlN nanofabrication a challenging process. Conventional approaches often require multiple hard masks and a metal mask to fabricate nanostructures. In this letter, we report a novel, simple method to fabricate AlN microresonators by using a single layer of silicon nitride mask combined with a thin conductive polymer layer. The conductive layer can be conveniently removed during developing without requiring an additional etching step. We achieve high intrinsic quality (Q) factors up to one million in AlN microresonators and demonstrate several nonlinear phenomena within our devices, including frequency comb generation, Raman lasing, third harmonic generation and supercontinuum generation.

physics.optics↗

arXiv2025

Inverse-Designed Silicon Nitride Nanophotonics

Silicon nitride photonics has enabled integration of a variety of components for applications in linear and nonlinear optics, including telecommunications, optical clocks, astrocombs, bio-sensing, and LiDAR. With the advent of inverse design - where desired device performance is specified and closely achieved through iterative, gradient-based optimization - and the increasing availability of silicon nitride photonics via foundries, it is now feasible to expand the photonic design library beyond the limits of traditional approaches and unlock new functionalities. In this work, we present inverse-designed photonics on a silicon nitride platform and demonstrate both the design capabilities and experimental validation of manipulating light in wavelength and spatial mode dimensions to high-Q resonators with controllable wavelength range and dispersion. Furthermore, we use these inverse-designed structures to form optical cavities that hold promise for on-chip nonlinear and quantum optics experiments.

physics.optics↗

arXiv2025

Hybrid Nonlinear Effects in Photonic Integrated Circuits

Nonlinear optics in photonic integrated circuits is usually limited to utilizing the nonlinearity of a single material. In this work, we demonstrate the use of hybrid optical nonlinearities that occur in two different materials. This approach allows us to observe combined Raman scattering and Kerr frequency comb generation using silicon nitride (Si3N4) microresonators with fused silica cladding. Here, the fused silica cladding provides Raman gain, while the silicon nitride core provides the Kerr nonlinearity for frequency comb generation. This way we can add Raman scattering to an integrated photonic silicon nitride platform, in which Raman scattering has not been observed so far because of insufficient Raman gain. The Raman lasing is observed in the silica-clad silicon nitride resonators at an on-chip optical power of 143 mW, which agrees with theoretical simulations. This can be reduced to mw-level with improved optical quality factor. Broadband Raman-Kerr frequency comb generation is realized through dispersion engineering of the waveguides. The use of hybrid optical nonlinearities in multiple materials opens up new functionalities for integrated photonic devices, e.g. by combining second and third-order nonlinear materials for combined supercontinuum generation and self-referencing of frequency combs. Combining materials with low threshold powers for different nonlinearities can be the key to highly efficient nonlinear photonic circuits for compact laser sources, high-resolution spectroscopy, frequency synthesis in the infrared and UV, telecommunications and quantum information processing.

physics.optics↗

arXiv2024

Phase Symmetry Breaking of Counterpropagating Light in Microresonators for Switches and Logic Gates

The rapidly growing field of integrated photonics is enabling a large number of novel devices for optical data processing, neuromorphic computing and circuits for quantum photonics. While many photonic devices are based on linear optics, nonlinear responses at low threshold power are of high interest for optical switching and computing. In the case of counterpropagating light, nonlinear interactions can be utilized for chip-based isolators and logic gates. In our work we find a symmetry breaking of the phases of counterpropagating light waves in high-Q ring resonators. This abrupt change in the phases can be used for optical switches and logic gates. In addition to our experimental results, we provide theoretical models that describe the phase symmetry breaking of counterpropagating light in ring resonators.

physics.optics↗

arXiv2024

Linear and Nonlinear Coupling of Light in Twin-Resonators with Kerr Nonlinearity

Nonlinear effects in microresonators are efficient building blocks for all-optical computing and telecom systems. With the latest advances in microfabrication, coupled microresonators are used in a rapidly growing number of applications. In this work, we investigate the coupling between twin-resonators in the presence of Kerr-nonlinearity. We use an experimental setup with controllable coupling between two high-Q resonators and discuss the effects caused by the simultaneous presence of linear and non-linear coupling between the optical fields. Linear-coupling-induced mode splitting is observed at low input powers, with the controllable coupling leading to a tunable mode splitting. At high input powers, the hybridized resonances show spontaneous symmetry breaking (SSB) effects, in which the optical power is unevenly distributed between the resonators. Our experimental results are supported by a detailed theoretical model of nonlinear twin-resonators. With the recent interest in coupled resonator systems for neuromorphic computing, quantum systems, and optical frequency comb generation, our work provides important insights into the behavior of these systems at high circulating powers.

physics.optics↗

arXiv2024

Controlled light distribution with coupled microresonator chains via Kerr symmetry breaking

Within optical microresonators, the Kerr interaction of photons can lead to symmetry breaking of optical modes. In a ring resonator, this leads to the interesting effect that light preferably circulates in one direction or in one polarization state. Applications of this effect range from chip-integrated optical diodes to nonlinear polarization controllers and optical gyroscopes. In this work, we study Kerr-nonlinearity-induced symmetry breaking of light states in coupled resonator optical waveguides (CROWs). We discover a new type of controllable symmetry breaking that leads to emerging patterns of dark and bright resonators within the chains. Beyond stationary symmetry broken states, we observe periodic oscillations, switching and chaotic fluctuations of circulating powers in the resonators. Our findings are of interest for controlled multiplexing of light in photonic integrated circuits, neuromorphic computing, topological photonics and soliton frequency combs in coupled resonators.

physics.optics↗

arXiv2024

Real-time imaging of standing-wave patterns in microresonators

Real-time characterization of microresonator dynamics is important for many applications. In particular it is critical for near-field sensing and understanding light-matter interactions. Here, we report camera-facilitated imaging and analysis of standing wave patterns in optical ring resonators. The standing wave pattern is generated through bi-directional pumping of a microresonator and the scattered light from the microresonator is collected by a short-wave infrared (SWIR) camera. The recorded scattering patterns are wavelength dependent, and the scattered intensity exhibits a linear relation with the circulating power within the microresonator. By modulating the relative phase between the two pump waves, we can control the generated standing waves movements and characterize the resonator with the SWIR camera. The visualized standing wave enables subwavelength distance measurements of scattering targets with nanometer-level accuracy. This work opens new avenues for applications in on-chip near-field (bio-)sensing, real time characterization of photonic integrated circuits and backscattering control in telecom systems.

physics.optics↗

arXiv2023

Microresonator soliton frequency combs via cascaded Brillouin scattering

We demonstrate Kerr soliton frequency comb generation that is seeded by a cascaded Brillouin scattering process. In this process, a pump laser is used to generate multiple orders of Brillouin sidebands in a microresonator, which in turn generate the soliton. In such a process, even orders of Brillouin scattering sidebands are co-propagating with respect to the pump laser while odd orders of Brillouin scattering are backwards propagating. In this work we present the generation of forward propagating Kerr solitons via a forward propagating second order Brillouin scattering process in a fused silica rod resonator. Importantly, we show that the Brillouin scattering process can bridge the gap between different microresonator mode families, such that the repetition rate of the Kerr soliton is independent from the Brillouin gain frequency shift (about 10 GHz in fused silica). In our work we demonstrate this by generating soliton pulse trains with a repetition rate of 107 GHz. Our work opens up a new way for using cascaded Brillouin lasing as a seed for microresonator frequency comb generation. This can be of particular interest for the realization of soliton frequency combs with low noise properties from Brillouin lasing while still having arbitrary repetition rates that are determined by the resonator size. Applications range from optical communication to LIDAR systems and photonic signal generation.

physics.optics↗

arXiv2023

Femtosecond pulse amplification on a chip

Femtosecond laser pulses enable the synthesis of light across the electromagnetic spectrum and provide access to ultrafast phenomena in physics, biology, and chemistry. Chip-integration of femtosecond technology could revolutionize applications such as point-of-care diagnostics, bio-medical imaging, portable chemical sensing, or autonomous navigation. However, current chip-integrated pulse sources lack the required peak power and on-chip amplification of femtosecond pulses has been an unresolved challenge. Here, addressing this challenge, we report >50-fold amplification of 1 GHz-repetition-rate chirped femtosecond pulses in a CMOS-compatible photonic chip to 800 W peak power with 116 fs pulse duration. This power level is 2-3 orders of magnitude higher compared to those in previously demonstrated on-chip pulse sources and can provide the power needed to address key applications. To achieve this, detrimental nonlinear effects are mitigated through all-normal dispersion, large mode-area and rare-earth-doped gain waveguides. These results offer a pathway to chip-integrated femtosecond technology with peak power-levels characteristic of table-top sources.

physics.optics↗

arXiv2023

Symmetry Broken Vectorial Kerr Frequency Combs from Fabry-P\'erot Resonators

Optical frequency combs find many applications in metrology, frequency standards, communications and photonic devices. We consider field polarization properties and describe a vector comb generation through the spontaneous symmetry breaking of temporal cavity solitons within coherently driven, passive, Fabry-P\'erot cavities with Kerr nonlinearity. Global coupling effects due to the interactions of counter-propagating light restrict the maximum number of soliton pairs within the cavity - even down to a single soliton pair - and force long range polarization conformity in trains of vector solitons.

physics.optics↗

arXiv2023

On-the-fly precision spectroscopy with a dual-modulated tunable diode laser and Hz-level referencing to a cavity

Advances in high-resolution laser spectroscopy have enabled many scientific breakthroughs in physics, chemistry, biology and astronomy. Optical frequency combs have pushed measurement limits with ultrahigh-frequency accuracy and fast-measurement speed while tunable diode laser spectroscopy is used in scenarios that require high power and continuous spectral coverage. Despite these advantages of tunable diode laser spectroscopy, it is challenging to precisely determine the instantaneous frequency of the laser because of fluctuations in the scan speed. Here we demonstrate a simple spectroscopy scheme with a frequency modulated diode laser that references the diode laser on-the-fly to a fiber cavity with sub-15 Hz frequency precision over an 11-THz range at a measurement speed of 1 THz/s. This is an improvement of more than two orders of magnitude compared to existing diode laser spectroscopy methods. Our scheme provides precise frequency calibration markers while simultaneously tracking the instantaneous scan speed of the laser. We demonstrate several applications, including dispersion measurement of an ultra-high-Q microresonator and spectroscopy of an HF gas cell, which can be used for absolute frequency referencing of the tunable diode laser. The simplicity, robustness and low costs of this spectroscopy scheme could prove extremely valuable for out-of-the-lab applications like LIDAR, gas spectroscopy and environmental monitoring.

physics.optics↗

arXiv2023

Room-Temperature Sputtered Ultralow-loss Silicon Nitride for Hybrid Photonic Integration

Silicon-nitride-on-insulator photonic circuits have seen tremendous advances in many applications, such as on-chip frequency combs, Lidar, telecommunications, and spectroscopy. So far, the best film quality has been achieved with low pressure chemical vapor deposition (LPCVD) and high-temperature annealing (1200 {\deg}C). However, high processing temperature poses challenges to the cointegration of Si3N4 with pre-processed silicon electronic and photonic devices, lithium niobate on insulator (LNOI), and Ge-on-Si photodiodes. This limits LPCVD as a front-end-of-line process. Here, we demonstrate ultralow-loss Silicon nitride photonics based on room-temperature reactive sputtering. Propagation losses as low as 5.4 dB/m after 400 {\deg}C annealing and 3.5 dB/m after 800 {\deg}C annealing are achieved, enabling ring resonators with more than 10 million optical quality factors. To the best of our knowledge, these are the lowest propagation losses achieved with low temperature silicon nitride. This ultralow loss enables threshold powers for optical parametric oscillations to 1.1 mW and enables the generation of bright soliton frequency combs at 1.3 and 1.5 {\mu}m. Our work features a full complementary metal oxide semiconductor (CMOS) compatibility with front-end silicon electronics and photonics, and has the potential for hybrid 3D monolithic integration with III-V-on-Si integrated lasers, and LNOI.

physics.optics↗