arXiv Science⌕ Search

arXiv subjects

Tobias J. Kippenberg

Publications and source records attributed to Tobias J. Kippenberg.

At least 19 recordsLinked to original sources

An integrated photonic millimeter-wave receiver with sub-ambient noise temperature

Growing demands for timing precision in positioning systems, and resolution in atmospheric sensing and automotive radar, have extended receiver frontends into the millimetre-wave and THz regimes. At these frequencies, the noise performance of field-effect transistors used in low-noise amplifiers degrades rapidly due to parasitic effects, limited carrier mobility, hot electrons, and shot noise. Parametric transducers that couple electromagnetic signals to optical fields can offer quantum-limited sensitivity at room temperature. Electro-optic materials can enable receivers that transduce radiofrequency signals into optical phase shifts. Yet to date, room-temperature receivers using electro-optical detection have not attained a noise figure comparable to the electronic amplifiers. Here we demonstrate a room-temperature cavity electro-optic-based millimetre-wave receiver on a lithium tantalate photonic integrated circuit, achieving an on-chip photon-number transduction efficiency of 10%. The equivalent input-referred receiver-added noise temperatures reach $110\,\mathrm{K}$ on-chip and $202^{+35}_{-33}\,\mathrm{K}$ for the full system at 60.5 GHz, with noise figure matching state-of-the-art V-band electronic low-noise amplifiers. We resolve the thermal noise in cavity electro-optic transducers, showing that the system is limited by thermal photon occupation ($\sim$100) in the millimetre-wave cavity and optical vacuum noise, with no measurable excess noise. Our work demonstrates that integrated photonics can reach state-of-the-art electronic receiver noise performance while offering high-radiofrequency-power survivability and compatibility with remote optical readout. This establishes cavity electro-optics as a low-noise, electromagnetic interference-resilient, chip-scale receiver frontend for millimetre-wave applications, enabling scalable analogue processing in the optical domain.

physics.optics↗

Periodic orbits underlying optical turbulence in the Lugiato-Lefever equation

Optical turbulence in driven nonlinear resonators is a form of spatiotemporal chaos that remains poorly understood and is largely characterized through simulations and experiments but lacks a dynamical-systems description. Here we show that in the regime of weak spatiotemporal chaos, the dynamics is structured by families of exact, fully nonlinear, time-periodic solutions of the Lugiato-Lefever equation for driven-dissipative Kerr resonators. These unstable periodic orbits, which we term Oscillating Turing Rolls (OTR), are embedded within the spatiotemporal chaos of optical turbulence. Parametric continuation using Newton-Krylov methods reveals their existence range, stability, and bifurcation-theoretic origin. In symmetry-constrained domains, OTR solutions are intermittently shadowed by chaotic trajectories; in extended domains, they appear as localized motifs of spatiotemporal chaos. Identifying these nonlinear, non-chaotic building blocks establishes a dynamical-systems-based description of optical turbulence in nonlinear optical resonators.

nlin.PS↗

A photonic-integrated optomechanical mid-infrared detector

Tracking the resonance frequency of a mechanical oscillator is the basis of atomic force microscopy, mass sensing and thermometry. Nanomechanical thermal detectors exploit this principle to sense absorbed radiation, most effectively with tensile-stressed resonators, whose tension converts thermal expansion into a large frequency shift and dilutes dissipation. Approaching their fundamental sensitivity limit, however, has required free-space or fibre-coupled interferometers, hindering compact deployment and scaling to arrays. Here we remove this bottleneck by monolithically integrating a high-Q nanomechanical resonator with a silicon nitride photonic integrated circuit. A tensile-stressed silicon nitride trampoline with an impedance-matched platinum absorber is dispersively coupled to a photonic integrated microresonator beneath it. At room temperature and with microwatt-level optical power, the detector reaches a noise-equivalent power of 3.4 pW/$\sqrt{\rm Hz}$ for broadband thermal radiation (3-12 $μ$m), referred to incident power. Referred to absorbed power, this is within a factor of 1.5 of its fundamental thermal fluctuation limit. Using our detector in a state-of-the-art commercial Fourier-transform infrared spectrometer, we resolve the vibrational fingerprint of a polymer film across 2-20 $μ$m and reach the precision of the built-in pyroelectric detector with about an order of magnitude lower incident power. This architecture opens a route to multiplexed optomechanical focal-plane arrays.

physics.optics↗

Terabit-scale wavelength-multiplexed transmitter enabled by thin-film lithium tantalate

Artificial-intelligence systems face a growing data-movement bottleneck and require higher interconnect bandwidth without a proportional increase in electrical power consumption or the number of laser sources and fibre connections. Moving optical interfaces closer to computing chips reduces electrical transmission loss, while demanding optical engines that combine high channel capacity, broadband modulation and simple packaging. Although wavelength multiplexing relieves pressure on the fibre budget, integrating shared multi-wavelength sources with dense wavelength routing and broadband modulation in a compact format remains challenging. Here we demonstrate a monolithic transmitter that brings these functions together on a single material platform, enabled by the low birefringence and native Pockels response of thin-film lithium tantalate. The device separates, independently modulates and recombines eight wavelength channels between one optical input and output. This architecture retains a two-fibre interface as the channel count grows, directly addressing the packaging burden of parallel optical links. Measurements across the eight channels establish an aggregate line rate of 1.6 Tbit s$^{-1}$. Operation with a shared optical frequency comb achieves an estimated net data rate of 0.58 Tbit s$^{-1}$ across four channels, demonstrating compatibility with a common multi-wavelength source. Scaling this architecture into multiple wavelength-multiplexed engines offers a path towards 10 Tbit s$^{-1}$ optical interfaces with high bandwidth per unit package edge, positioning thin-film lithium tantalate for the next generation of co-packaged optical interconnects.

physics.app-ph↗

Damping-dependent thermalization of neighboring nanomechanical resonators below 1 mK

The position noise spectra of six drums on a single chip were measured on a single cooldown below 1.3 kelvin. Cryostat temperatures as low as 0.7 mK were achieved. The temperature dependence of the resonance frequency and linewidth of the drum modes was analyzed in the framework of the tunneling two level system (TLS) model. Departures of the resonance frequency and the position noise power from the expected logarithmic and linear temperature dependences, respectively, were interpreted as indications of thermal decoupling from the cryostat. This previously unexplored measurement configuration revealed that similar neighboring drums on a single chip may be at different temperatures. At the lowest temperatures, some drums exhibited excess damping that decreased with temperature. The magnitude of the excess damping of the drums was correlated with the thermal coupling of their TLS to the cryostat. In the case of one drum, a temporary increase in its damping coincided with a decrease in its mode temperature. The thermalization of the TLS to the cold finger was independent of pump power, pulse tube state and temperature of the pre-cooling stages of the cryostat. These results suggest that thermalization of nanomechanics to the cryostat can be mediated by TLS damping rather than clamping loss and may impact efforts to extend the coherence of mechanical resonators.

cond-mat.mes-hall↗

Sub-kHz linewidth integrated extended-DBR Pockels lasers using lithium tantalate

Tunable low-noise lasers are crucial components employed in modern metrology. Advances in photonic integrated circuit technology have provided a new platform for compact integrated lasers with large output powers, frequency-agile tuning, and narrow linewidths. For instance, lithium niobate extended-DBR lasers can yield output powers in the tens of mW, GHz-level tuning ranges, and tuning rates in the hundreds of MHz. However, noise levels achievable in other integrated laser designs remain challenging to reach. Here, we address this challenge by implementing extended-DBR lasers in lithium tantalate, thereby achieving intrinsic linewidths as low as 24 Hz, output powers of 10 mW, with tuning features on par with those of lithium niobate. The extended-DBR laser is assembled with modern packaging solutions to improve its robustness and demonstrate long-term stability with a free-running frequency drift within a range of 232 MHz over 19 hours. These benefits, in conjunction with lithium tantalate's suitability for volume manufacturing, promise to considerably expand accessibility to a new generation of widely tunable and low-noise integrated lasers.

physics.optics↗

Quantum-limited traveling-wave parametric amplifier based on DUV-defined planar structures

The relentless scaling of classical microelectronics has been enabled by the precision and reproducibility of deep-ultraviolet (DUV) optical lithography. Implementing large-scale superconducting quantum processors will require cryogenic microwave components that follow a similarly scalable fabrication path. This need is particularly acute for high circuit-density devices such as traveling-wave parametric amplifiers (TWPAs), where recent implementations have demonstrated high gain, broad bandwidth, high saturation power, and near-quantum-limited noise, but trade-offs between footprint, insertion loss, and scalable integration remain. Here, we demonstrate a four-wave-mixing TWPA fabricated via a hybrid scheme that combines DUV-defined planar circuit elements with electron-beam-patterned Josephson junctions, constituting a first step toward fully scalable manufacturing. The device combines a compact footprint of 6.6 mm $\times$ 6.6 mm with broadband gain over the measured 3-11 GHz span and an average 1 dB compression point of -102 dBm. By using planar capacitors to reduce loss, it operates near the quantum limit, with an average added noise of 0.4 photons above the standard quantum limit in the 4 to 8 GHz band. The phase-matching stopband remains narrow, with a bandwidth of 43 MHz, consistent with resonator-frequency variation below 1% and indicative of the circuit-parameter uniformity enabled by DUV lithography. These results show that DUV-defined planar elements can enable compact, low-loss, near-quantum-limited TWPAs and provide a promising route toward high-density cryogenic microwave hardware for large-scale quantum systems.

quant-ph↗

Entanglement Swapping with Integrated Narrowband Photon Sources for Quantum Repeaters

Promising implementations of first generation quantum repeaters are predicted to require atomic-based quantum memory systems interfaced with photonic sources. Integrated photonics provides a promising solution for fibre-based, field-deployed operation of quantum repeaters, however many leading quantum memory platforms require narrow-bandwidth photons that are challenging to generate with integrated photonics. Narrowband photons also present significant technical challenges when implementing entanglement-swapping, particularly with regards to systems-level stabilisation. This work addresses some of these fundamental and technical challenges, by demonstrating entanglement-swapping using state-of-the-art integrated photon sources with bandwidths compatible with multiple atomic-based quantum memory platforms. We obtained a background-subtracted (net) HOM visibility of 0.99$\,\pm\,$0.01, showing high photon indistinguishability and purity, with a net swapped state visibility of $\mathcal{V}$=0.88$\,\pm\,$0.06 demonstrating that the final entanglement would be sufficient to violate a Bell inequality. The experiment used independent pump lasers for each photon pair source, with highly different frequencies to mimic entanglement swapping between different repeater nodes or platforms. Phase and frequency stabilisation spanning 1.6 THz was achieved using all-fibre, commercially-available components. These results address important challenges in implementing field-deployed quantum repeaters, from the integrated photonic solutions for narrowband photon pairs, to systems-level stabilisation between independent quantum repeater nodes.

quant-ph↗

Broadband suspended lithium tantalate Mach-Zehnder modulator achieving a 460 Gbit/s net data rate

Thin-film lithium tantalate photonic integrated circuits have recently been demonstrated as a promising next-generation electro-optic platform, offering favorable properties including reduced DC drift, higher optical power handling, and lower birefringence compared to lithium niobate. However, high-speed LiTaO3 modulators reported to date have predominantly relied on silicon substrates, whose large dielectric constant compromises microwave velocity matching and imposes RF conductor losses that limit the achievable electro-optic bandwidth. Here, we implement a silicon substrate undercut technique to suspend the electrode region of lithium-tantalate-on-insulator (LTOI) Mach-Zehnder modulators (MZMs), effectively decoupling the traveling-wave electrodes from the high-permittivity silicon handle wafer, thereby reducing microwave losses. In addition, the undercut removes any susceptibility to parasitic surface conductance (PSC) induced losses of the oxide-silicon interface. The fabricated MZM achieves a 3 dB electro-optic bandwidth of 110 GHz, with a half-wave voltage of 5.1 V for an 8 mm-long device. Exploiting the extended bandwidth, we demonstrate a high single-lane intensity-modulation and direct-detection (IMDD) net data rate of 460 Gbit/s using PAM8 signaling. These results establish silicon substrate undercut as an effective and process-compatible pathway to unlock the full electro-optic potential of lithium tantalate on its native silicon-based wafer platform.

physics.optics↗

All-band photonic integrated optical parametric amplification

Optical amplifiers are ubiquitous in science and technology and are the workhorse of modern communications. Currently, virtually all amplifiers rely on atomic resonances, such as rare-earth-doped fibers, or are based on III-V semiconductors. Fueled by emerging applications, there is increased demand for amplifiers that are high-gain, broadband, low-noise, and deliver high output power outside traditional wavelength ranges. Over the past few decades, it has been shown that optical parametric amplifiers (OPAs) can address this challenge. Pioneering works on highly nonlinear optical fibers or bulk crystals have demonstrated their potential, but high pump powers and long fiber length limited their practical use. Recently, a renaissance of OPAs has occurred with the demonstration of photonic integrated circuits, which exhibit higher effective nonlinearity and enable wider bandwidths. Yet they require ultra-low loss, highly precise dispersion engineering, and large chip footprints, limiting OPA performance to date. Here, we overcome these limitations and, using periodically poled thin-film lithium tantalate (PPLT) photonic integrated circuits, we demonstrate continuous-wave optical parametric gain up to 23.5 dB, with a flat-top profile spanning across an 850 nm-wide optical wavelength window, corresponding to 100 THz and covering all communication bands. Moreover, on-chip output signal power as large as 313 mW in the optical O-band is achieved. We further realize all-optical inter-band modulation transfer between the C- and O-bands. Our approach uses cascaded second-order nonlinear processes that provide high effective third-order nonlinearities while preserving the wide material bandgap. These results establish PPLT integrated photonic circuits as a scalable platform for broadband optical amplification and frequency conversion across wavelengths where rare-earth doped amplifiers are absent.

physics.optics↗

Strong enhancement of Er3+ emission at room temperature in Si3N4 metasurfaces

We report a significant enhancement of room-temperature photoluminescence from trivalent erbium-doped (Er3+) silicon nitride (Si3N4) metasurfaces at the telecommunication wavelength prepared via ion implantation. The metasurfaces, consisting of periodic nanocylinder arrays, are designed to support Mie-type resonances that tailor the local density of optical states. By systematically optimizing the nanocylinder radii, we achieve a photoluminescence (PL) enhancement factor of ~18 at a radius of 390 nm after thermal annealing, which is in excellent agreement with our simulations. Time-resolved PL measurements reveal a nearly ten-fold reduction in luminescence lifetime, confirming that the enhancement is primarily driven by the Purcell effect. Furthermore, we demonstrate that the PL intensity is strongly dependent on the Er3+ ion implantation depth, with a four-fold increase in emission observed from 20 nm to 80 nm ion range. These results provide a robust pathway for integrating efficient, active light sources into CMOS-compatible photonic device.

physics.optics↗

Low voltage and high-bandwidth thin-film lithium tantalate modulator on a silicon dioxide substrate

Modern communication networks demand ever-increasing transmission bandwidth, placing stringent requirements on low-cost, high-performance electro-optic modulators. Substantial advances have been made in integrated photonics employing lithium niobate on insulator. In contrast, photonic integrated circuits based on lithium tantalate -- a material already commercially adopted for wireless filters -- have been developed, offering reduced DC drift, higher optical power handling, and lower birefringence. These advantages enable more complex and dense photonic integrated circuits, and make lithium tantalate a promising material platform for next-generation integrated electro-optic modulators. However, in contrast to the extensively studied thin-film lithium niobate platform, thin-film lithium tantalate modulators have only been explored on silicon substrates. Here, we report the first fabrication and characterization of thin-film lithium tantalate electro-optic modulators manufactured on a 4-inch (100 mm) fused-silica substrate for adapting a low-loss slow-wave microwave electrode to improve the electro-optic bandwidth. By employing a slow-wave electrode design to achieve velocity matching between microwave and optical signals, the demonstrated modulator achieves a 3-dB electro-optic bandwidth of 64 GHz with a low half-wave voltage of 1.53 V, with potential to operate at the measured 100 GHz electrical bandwidth, if the employed spectral biasing is removed. The modulator moreover exhibits low bias drift, with a constant switching voltage down to 10 mHz. This performance enables high-speed data transmission comparable to state-of-the-art lithium niobate modulators fabricated on quartz substrates. Using the fabricated devices, a net single lane data rate of 440.6 Gbps is achieved using PAM8 signaling.

physics.optics↗

Frequency combs and coherent dissipative structures in nonlinear optical microresonators

Laser-driven high-Q Kerr-nonlinear optical microresonators enable parametric oscillation with low-power continuous-wave lasers and host a variety of coherent dissipative structures, including dissipative Kerr solitons and switching waves. These time-periodic structures constitute coherent optical frequency combs, and photonic-chip integration has miniaturized them to the chip scale. Such photonic-integrated, microresonator-based frequency combs - often termed 'microcombs' or 'Kerr combs' - have been demonstrated in various system-level and scientific applications. They complement femtosecond-laser-based frequency combs when high repetition rates, broad bandwidths, or high power per comb line are needed. This review introduces the field of microcombs and outlines the fundamental physical principles governing the generation of coherent frequency combs in microresonators.

physics.optics↗

On-Chip Frequency Noise Cancellation in Nanomechanical Resonators using Cavity Optomechanics

Understanding and minimizing the sources of frequency noise in nanomechanical resonators is crucial for many sensing applications. In this work, we report an ultracoherent perimeter-mode nanomechanical resonator co-integrated with an on-chip optical cavity. This device combines low thermomechanical force noise and low detector noise, allowing us to study its intrinsic frequency fluctuations in detail. We find that the fluctuations of two mechanical modes are strongly correlated. Moreover, we demonstrate the generation of a signal at the frequency difference between the two modes directly on chip via nonlinear optomechanical transduction. This `difference signal' has vastly reduced intrinsic frequency fluctuations and can be used for frequency tracking with high precision, as we establish in a proof-of-principle experiment.

physics.optics↗

Reconfigurable Resonant Multimode Nonlinear Coupling for UV-to-infrared Frequency Generation

On-chip coherent visible and near-infrared (NIR) light generation has broad applications in metrology, bio-sensing, and quantum information. High-Q microresonators are ideal candidates for generating light across such broad wavelength ranges via efficient second- ($χ^{(2)}$) and third-order ($χ^{(3)}$) nonlinear optical processes. However, harnessing these diverse nonlinearities simultaneously in a single microresonator remains elusive yet highly attractive both fundamentally and technologically. Here, we demonstrate coherent light generation from the ultraviolet to NIR in a silicon nitride microresonator pumped by a single continuous-wave telecom laser. This broad frequency generation arises from the interplay of $χ^{(2)}$ and $χ^{(3)}$ nonlinear processes. A cascade of nonlinear processes, including harmonic generation and optical parametric oscillation (OPO), is initiated by the photoinduced second harmonic generation enabled by all-optical poling. The dynamic reconfigurability of this $χ^{(2)}$ nonlinearity enables access to different transverse spatial modes at the second harmonic, enabling highly tunable OPO processes triggered by hybrid modal phase matching conditions and yielding milliwatt-level NIR light. This work sheds new insights into the fundamental physics of cooperative nonlinear multimode interactions in resonant systems and provides a versatile approach for reconfigurable OPOs, highlighting their potential to generate light at wavelengths beyond the reach of photonic integrated lasers.

physics.optics↗

Watt-level second harmonic generation in periodically poled thin-film lithium tantalate

Second-harmonic generation (SHG) is a fundamental tool in modern laser technology, enabling coherent frequency conversion to remote optical bands, serving as the basis for self-referenced femtosecond lasers and quadrature-squeezed light sources. State-of-the-art SHG relies on bulk crystals and ridge waveguides, although continuous-wave (CW) SH efficiency in bulk crystals is limited by short interaction lengths and large mode areas. Ridge waveguides offer better performance with lower pump power requirements, yet must span several centimeters to deliver high output power, complicating fabrication and narrowing the bandwidth. Recently, SHG in periodically poled thin-film lithium niobate integrated photonic circuits has attracted significant interest, offering orders-of-magnitude improvement in SHG under CW pumping due to the stronger optical mode confinement. However, lithium niobate has a low optical damage threshold, even in MgO-doped substrates, which limits SH power output to well below the watt level. Here, we overcome this challenge and demonstrate 7 mm-long periodically poled thin-film lithium tantalate (PPLT) waveguides that achieve high SH output in the CW regime, with generated power exceeding 1 W and off-chip output above 0.5 W at 775 nm under 4.5 W pump power. PPLT offers a higher optical damage threshold than PPLN and supports watt-level operation. By optimizing electrode geometry and poling conditions, we obtain reproducible poling despite lithium tantalate's coercive field being nearly four times higher than that of MgO-doped lithium niobate. Although its effective nonlinearity is more than five times lower, we achieve watt-level CW output with a short waveguide, demonstrating the potential of PPLT circuits for high-power applications in integrated lasers, quantum photonics, AMO physics, optical clocks, and frequency metrology.

physics.optics↗

Strongly driven cavity quantum electrodynamical-optomechanical hybrid system

Hybrid quantum systems harness the distinct advantages of different physical platforms, yet their integration is not always trivial due to potential incompatibilities in operational principles. Here, we theoretically propose and demonstrate a scheme for generating non-Gaussian mechanical states using a strongly driven hybrid system that combines cavity quantum electrodynamics (QED) and cavity optomechanics. Our protocol prepares a non-Gaussian cavity state in the dispersive regime of cavity QED and subsequently transfers it to a mechanical oscillator using the optomechanical interaction enhanced by a coherent cavity drive. While non-Gaussian cavity state control in cavity QED is well established in the dispersive regime, its behavior under strong cavity drive, essential for cavity optomechanics, remains largely unexplored. To bridge this gap, we develop an efficient simulation framework to model cavity QED dynamics in the high-photon-number regime. We show that a strong cavity drive can coherently displace the cavity state with minimal perturbations, effectively decoupling it from the qubit. The resulting large coherent cavity field enhances the optomechanical coupling strength, enabling high-fidelity transfer of non-Gaussian cavity states to the mechanical mode. These results reveal new dynamical features of driven cavity QED and open a pathway toward realizing non-Gaussian mechanical quantum memories and sensors.

quant-ph↗

Electrons herald non-classical light

Free electrons are a widespread and universal source of electromagnetic fields. The past decades witnessed ever-growing control over many aspects of electron-generated radiation, from the incoherent emission produced by X-ray tubes to the exceptional brilliance of free-electron lasers. Reduced to the elementary process of quantized energy exchange between individual electrons and the electromagnetic field, electron beams may facilitate future sources of tunable quantum light. However, the quantum features of such radiation are tied to the correlation of the particles, calling for the joint electronic and photonic state to be explored for further applications. Here, we demonstrate the coherent parametric generation of non-classical states of light by free electrons. We show that the quantized electron energy loss heralds the number of photons generated in a dielectric waveguide. In Hanbury-Brown-Twiss measurements, an electron-heralded single-photon state is revealed via antibunching intensity correlations, while two-quantum energy losses of individual electrons yield pronounced two-photon coincidences. The approach facilitates the tailored preparation of higher-number Fock and other optical quantum states based on controlled interactions with free-electron beams.

quant-ph↗