arXiv subjects

Tingyu Cheng

Publications and source records attributed to Tingyu Cheng.

9 recordsLinked to original sources

arXiv2026

Real-time Puncture Detection and Recovery for Pneumatic Soft Actuators

Soft robots offer safe and adaptive interaction with humans and unstructured environments through their inherent ability to deform and comply. Pneumatic actuators are one way to build soft robots. They are typically made from soft silicone materials and are especially effective for driving such systems, enabling smooth and adaptable motion. However, their compliant nature also makes them vulnerable to mechanical failures like punctures and tears, limiting practical deployment. To address this, we propose a puncture detection system for soft actuators using motion data from a single inertial measurement unit. Extracted features are used to train anomaly detectors for puncture detection and non-linear models to estimate severity. We also introduce a multi-chamber pneumatic soft bending actuator capable of diverse configurations via selective chamber inflation. Our algorithm identifies the punctured chamber and provides a severity score using a chamber perturbation scheme. Anomaly detectors are trained on normal operation data and detect damage through reconstruction errors, while severity is estimated by a separate model trained under slightly modified conditions. Finally, we demonstrate a failure recovery strategy to maintain actuation force post-failure. This approach enhances the reliability and safety of soft robotic systems through real-time, data-driven damage detection.

cs.RO↗

arXiv2026

Sensorimotor Stickies: A Reconfigurable On-Body Platform for Closed-Loop Sensorimotor Training

Closed-loop sensorimotor training systems can improve learning by sensing movement and delivering real-time feedback, yet most are built as fixed implementations tied to a single task, even though the core technology (inertial and tactile sensing, vibrotactile cueing, rule-based logic) remains the same. We present Sensorimotor Stickies, a reconfigurable on-body platform that treats sensing and vibrotactile feedback as modular stickies that can be patched onto the body as needed. The platform includes miniaturized adhesive modules for IMU sensing, optional tactile sensing, and vibrotactile actuation; low-power firmware and BLE infrastructure for raw streaming and motor control without task-specific rewrites; and a companion mobile app that provides a shared body-centered model for placement, calibration, and feedback authoring. Together, these components enable reconfiguration across training scenarios, user needs, and feedback setups. We evaluate the platform through technical characterization, configured application demonstration, practitioner-mediated configuration sessions, and an end-user study, demonstrating technical feasibility, reconfiguration breadth, and end-user configurability for first-time setup, calibration, and within-task feedback reconfiguration.

cs.HC↗

arXiv2026

Bio-SFT: Asymmetric Cortical Guidance and Retinal Adaptation for Robust HDR Reconstruction

Recovering high dynamic range (HDR) radiance from a single standard dynamic range (SDR) image is highly ill-posed. Extreme luminance variation and severe quantization in dark regions make accurate reconstruction challenging, often leading to visual artifacts and color distortions. To address this problem, we propose Bio-SFT, a bio-inspired spiking frequency transformer for single-image HDR reconstruction. Bio-SFT incorporates three biologically motivated components. First, a learnable Naka--Rushton retinal adaptation frontend stabilizes the input under complex lighting conditions. Second, an explicit Parvo--Magno split introduces asymmetric Parvo-to-Magno guidance, allowing high-frequency structural cues to modulate low-frequency reconstruction. Third, an event-driven SNN hard gating module applies all-or-none spiking to suppress dark-region noise while preserving structural details. The module is trained with a sparsity prior to encourage efficient feature utilization. Built for end-to-end training within a transformer backbone, these lightweight components provide strong parameter efficiency. Experiments on HDRTV1K show that Bio-SFT achieves competitive perceptual quality and consistently improves HDR-VDP-3 and $\Delta E_{ITP}$ while reducing artifact propagation in symmetric guidance pipelines.

cs.CV↗

arXiv2026

3D Printing of Passively Actuated Self-Folding Robots with Integrated Functional Modules

We introduce an elastic-driven self-folding approach that fabricates robots directly from flat 3D-printed conductive PLA nets. Elastic bands routed through printed hooks store energy that folds the sheet into programmed 3D geometries, while the flat state allows accurate placement of electronics and magnets before deployment. The same substrate doubles as electrodes for capacitive touch and supports a reusable platform I/O palette with Hall sensors and eccentric rotating mass (ERM) motors for docking detection and vibration actuation. We also derive a closed-form folding model that balances hinge stiffness with elastic band moment to predict equilibrium fold angles; experiments validate the model and yield a design map linking hinge thickness, band size, and hook spacing to target angles. Using this workflow we realize multiple polyhedral modules and demonstrate three applications: a cube that highlights the potential of self-folding for scalable modular robot collectives, a deployable gripper, and a tendon-driven finger. The method is low cost, stimulus-free, and integrates actuation and sensing.

cs.RO↗

arXiv2026

Deco: Extending Personal Physical Objects into Pervasive AI Companion through a Dual-Embodiment Framework

Individuals frequently form deep attachments to physical objects (e.g., plush toys) that usually cannot sense or respond to their emotions. While AI companions offer responsiveness and personalization, they exist independently of these physical objects and lack an ongoing connection to them. To bridge this gap, we conducted a formative study (N=9) to explore how digital agents could inherit and extend the emotional bond, deriving four design principles (Faithful Identity, Calibrated Agency, Ambient Presence, and Reciprocal Memory). We then present the Dual-Embodiment Companion Framework, instantiated as Deco, a mobile system integrating multimodal Large Language Models (LLMs) and Augmented Reality to create synchronized digital embodiments of users' physical companions. A within-subjects study (N=25) showed Deco significantly outperformed a personalized LLM-empowered digital companion baseline on perceived companionship, emotional bond, and design-principle scales (all p<0.01). A seven-day field deployment (N=17) showed sustained engagement, subjective well-being improvement (p=.040), and three key relational patterns: digital activities retroactively vitalized physical objects, bond deepening was driven by emotional engagement depth rather than interaction frequency, and users sustained bonds while actively navigating digital companions' AI nature. This work highlights a promising alternative for designing digital companions: moving from creating new relationships to dual embodiment, where digital agents seamlessly extend the emotional history of physical objects.

cs.HC↗

arXiv2026

Zero Shot Deformation Reconstruction for Soft Robots Using a Flexible Sensor Array and Cage Based 3D Gaussian Modeling

We present a zero-shot deformation reconstruction framework for soft robots that operates without any visual supervision at inference time. In this work, zero-shot deformation reconstruction is defined as the ability to infer object-wide deformations on previously unseen soft robots without collecting object-specific deformation data or performing any retraining during deployment. Our method assumes access to a static geometric proxy of the undeformed object, which can be obtained from a STL model. During operation, the system relies exclusively on tactile sensing, enabling camera-free deformation inference. The proposed framework integrates a flexible piezoresistive sensor array with a geometry-aware, cage-based 3D Gaussian deformation model. Local tactile measurements are mapped to low-dimensional cage control signals and propagated to dense Gaussian primitives to generate globally consistent shape deformations. A graph attention network regresses cage displacements from tactile input, enforcing spatial smoothness and structural continuity via boundary-aware propagation. Given only a nominal geometric proxy and real-time tactile signals, the system performs zero-shot deformation reconstruction of unseen soft robots in bending and twisting motions, while rendering photorealistic RGB in real time. It achieves 0.67 IoU, 0.65 SSIM, and 3.48 mm Chamfer distance, demonstrating strong zero-shot generalization through explicit coupling of tactile sensing and structured geometric deformation.

cs.RO↗

arXiv2025

DissolvPCB: Fully Recyclable 3D-Printed Electronics with Liquid Metal Conductors and PVA Substrates

We introduce DissolvPCB, an electronic prototyping technique for fabricating fully recyclable printed circuit board assemblies (PCBAs) using affordable FDM 3D printing, with polyvinyl alcohol (PVA) as a water-soluble substrate and eutectic gallium-indium (EGaIn) as the conductive material. When obsolete, the PCBA can be easily recycled by immersing it in water: the PVA dissolves, the EGaIn re-forms into a liquid metal bead, and the electronic components are recovered. These materials can then be reused to fabricate a new PCBA. We present the DissolvPCB workflow, characterize its design parameters, evaluate the performance of circuits produced with it, and quantify its environmental impact through a lifecycle assessment (LCA) comparing it to conventional CNC-milled FR-4 boards. We further develop a software plugin that automatically converts PCB design files into 3D-printable circuit substrate models. To demonstrate the capabilities of DissolvPCB, we fabricate and recycle three functional prototypes: a Bluetooth speaker featuring a double-sided PCB, a finger fidget toy with a 3D circuit topology, and a shape-changing gripper enabled by Joule-heat-driven 4D printing. The paper concludes with a discussion of current technical limitations and opportunities for future directions.

cs.HC↗

arXiv2025

Sustainability assessment using multimodal AI agents

Reducing the rapidly growing environmental impact of the computing industry requires assessing the emissions of electronics at scale. However, a traditional life cycle assessment (LCA) of an electronic device, which maps materials and processes to environmental impacts, often requires proprietary or unavailable data. Here, we reimagine conventional sustainability assessment by introducing a multimodal multi-agent AI system that emulates the collaborative process between LCA professionals and stakeholders (such as product managers and engineers) to automatically estimate the carbon footprint of electronic devices. The agents iteratively construct a complete life-cycle inventory by leveraging a structured data abstraction and software tools that mine information from the public internet, including repair communities and government regulatory databases. This reduces data gaps and data collection from weeks or months of expert time to under one minute. The system can calculate carbon footprint within 19% of expert LCAs with zero proprietary data (typical of the variation between human LCAs). We also show that by encoding domain-specific knowledge, environmental impact estimation can be reframed as a data-driven prediction task, in which both unknown products and emission factors are represented as weighted combinations of similar ones with known emissions.

cs.AI↗

arXiv2024

Recy-ctronics: Designing Fully Recyclable Electronics With Varied Form Factors

For today's electronics manufacturing process, the emphasis on stable functionality, durability, and fixed physical forms is designed to ensure long-term usability. However, this focus on robustness and permanence complicates the disassembly and recycling processes, leading to significant environmental repercussions. In this paper, we present three approaches that leverage easily recyclable materials-specifically, polyvinyl alcohol (PVA) and liquid metal (LM)-alongside accessible manufacturing techniques to produce electronic components and systems with versatile form factors. Our work centers on the development of recyclable electronics through three methods: 1) creating sheet electronics by screen printing LM traces on PVA substrates; 2) developing foam-based electronics by immersing mechanically stirred PVA foam into an LM solution; and 3) fabricating recyclable electronic tubes by injecting LM into mold cast PVA tubes, which can then be woven into various structures. To further assess the sustainability of our proposed methods, we conducted a life cycle assessment (LCA) to evaluate the environmental impact of our recyclable electronics in comparison to their conventional counterparts.

cs.HC↗