arXiv subjects

Timothy W. Schmidt

Publications and source records attributed to Timothy W. Schmidt.

12 recordsLinked to original sources

arXiv2026

Silicon Solar Cell Design for >30% Efficiency via Singlet Fission

Singlet fission (SF) materials convert high-energy photons into multiple charge carriers, providing a route to exceed the efficiency limits of single-junction silicon solar cells without many of the complexities of multi-junction tandem designs. Following the first demonstration of an SF-enhanced silicon solar cell in 2025, there is a need to understand how SF materials can be effectively integrated into high-efficiency industrial silicon devices and translated from proof of concept to a manufacturable technology. Using coupled optical and electrical simulations, we assess the efficiency potential of several industrially relevant silicon cell architectures combined with SF materials. Interdigitated back-contact (IBC) cells offer the greatest potential for improvement due to unrestricted front-surface access and can achieve efficiencies exceeding 33%. However, performance is highly sensitive to front-surface passivation quality. Appropriate silicon design, particularly controlled surface doping and fixed interfacial charge, can mitigate recombination losses and relax passivation requirements for ultra-thin exciton-transfer layers.

cond-mat.mtrl-sci↗

arXiv2025

Visible Imaging of Incoherent 1200-nm Light via Triplet--Triplet Annihilation Upconversion

Upconversion of low-energy photons to higher-energy photons provides an opportunity to surpass traditional limitations in fields such as 3D printing, photovoltaics, and photocatalysis. Triplet--triplet annihilation upconversion (TTA-UC) is particularly appealing for such applications as it can efficiently upconvert low-intensity, incoherent light. However, previously demonstrated thin-film TTA systems are simultaneously constrained by modest efficiencies and limited reach into the near infrared (NIR). Here, we design a single-layer thin-film bulk heterojunction that integrates PbS quantum dots (QDs) as tunable NIR absorbers within an organic semiconductor matrix of TES-ADT, achieving large anti-Stokes shifts up to 500 nm and high internal quantum efficiencies across the NIR-I and NIR-II windows (800-1200 nm). Through the incorporation of 5-tetracene carboxylic acid ligands on the PbS QD surface, the yield of sensitized triplets was boosted, as confirmed by transient absorption and time-resolved photoluminescence measurements. The resulting films demonstrated a 15-fold improvement in UC efficiency. Furthermore, we demonstrate visible imaging of incoherent 1200 nm light via thin-film TTA-UC at incident intensities at the imaging mask as low as 20 mWcm$^2$, marking a significant advance toward practical implementation of solid-state NIR-to-visible upconversion.

physics.optics↗

arXiv2025

Mitigating Singlet Exciton Back-Transfer using 2D Spacer Layers for Perovskite-Sensitised Upconversion

Photon upconversion has potential applications in light-emitting diodes, photocatalysis, bio-imaging, microscopy, 3D printing, and photovoltaics. Bulk lead-halide perovskite films have emerged as promising sensitisers for solid-state photon upconversion via triplet-triplet annihilation due to their excellent optoelectronic properties. In this system, a perovskite sensitiser absorbs photons and subsequently generates triplet excitons in an adjacent emitter material, where triplet-triplet annihilation can occur allowing for the emission of higher energy photons. However, a major loss pathway in perovskite-sensitised upconversion is the back-transfer of singlet excitons from the emitter to the sensitiser via F\"orster Resonance Energy Transfer. In this investigation we introduce a 2D perovskite spacer layer between the bulk perovskite sensitiser and a rubrene emitter to mitigate back-transfer of singlet excitons from rubrene to the bulk perovskite sensitiser. This modification reveals the inherent balance between efficient triplet exciton transfer across the interface with a potential barrier versus the mitigation of near-field back-transfer by increasing the distance between the sensitiser and singlet excitons in the emitter. Notably, the introduction of this spacer layer enhances the relative upconversion efficiency at lower excitation power densities while also sustaining performance over extended timescales. This work represents significant progress toward the practical applications of perovskite-sensitised photon upconversion.

cond-mat.mtrl-sci↗

arXiv2024

Electronic Structure at the Perovskite Rubrene Interface: The Effect of Surface Termination

Perovskite films have rapidly emerged as leading active materials in optoelectronic devices due to their strong optical absorption, high carrier mobility and ease of fabrication. Whilst proving to be promising materials for solar cells and light-emitting diodes, another application of perovskites which makes effective use of their unique properties is sensitisation for photon upconversion. Consisting of a bulk perovskite sensitiser alongside an adjacent organic semiconductor film, the upconverting system can absorb multiple low-energy photons to emit high-energy photons. In this work, density functional theory, in conjunction with GW theory, is utilised to investigate the electronic structure at the MAPbI$_3$/rubrene interface for different surface terminations of MAPbI$_3$. From this investigation, we reveal that the surface termination of the perovskite layer greatly affects the charge density at the interface and within the rubrene layer driven by the formation of interfacial dipole layers. The formation of a strong interfacial dipole for the lead-iodide terminated perovskite alters the band alignment of the heterojunction and is expected to facilitate more efficient hole transfer. For the perovskite surface terminated with the methylammonium iodide layer, the highest occupied molecular orbital of the adjacent rubrene layer lies deep within the perovskite band gap. This termination type is further characterized by a lower density of states near the band edges thereby acting as a spacer which is anticipated to decrease the probability of charge transfer across the interface. Thus based on our results, PbI$_2$-terminated perovskite surfaces are predicted to be favourable for applications where hole transfer to a rubrene layer is ideal, highlighting the significance of surface termination for all systems where the electronic environment at the interface is crucial to performance.

cond-mat.mtrl-sci↗

arXiv2023

Singlet fission spin dynamics from molecular structure: a modular computational pipeline

Singlet fission, which has applications in areas ranging form solar energy to quantum information, relies critically on transitions within a multi-spin manifold. These transitions are driven by fluctuations in the spin-spin exchange interaction, which have been linked to changes in nuclear geometry or exciton migration. Whilst simple calculations have supported this mechanism, to date little effort has been made to model realistic fluctuations which are informed by the actual structure and properties of physical materials. In this paper, we develop a modular computational pipeline for calculating singlet fission spin dynamics by way of electronic structural calculations, molecular dynamics, and numerical models of spin dynamics. The outputs of this pipeline aid in the interpretation of measured spin dynamics and allow us to place constraints on geometric fluctuations which are consistent with these observations.

physics.chem-ph↗

arXiv2022

Diabatic valence-hole states in the C$_2$ molecule: "Putting Humpty Dumpty together again"

Despite the long history of spectroscopic studies of the C$_2$ molecule, fundamental questions about its chemical bonding are still being hotly debated. The complex electronic structure of C$_2$ is a consequence of its dense manifold of near-degenerate, low-lying electronic states. A global multi-state diabatic model is proposed here to disentangle the numerous configuration interactions within four symmetry manifolds of C$_2$ ($^{1}\Pi_g$, $^{3}\Pi_g$, $^{1}\Sigma_u^+$, and $^{3}\Sigma_u^+$). The key concept of our model is the existence of two "valence-hole" configurations, $2\sigma_g^22\sigma_u^11\pi_{u}^33\sigma_g^2$ for $^{1,3}\Pi_g$ states and $2\sigma_g^22\sigma_u^11\pi_{u}^43\sigma_g^1$ for $^{1,3}\Sigma_u^+$ states that derive from $3\sigma_g\leftarrow2\sigma_u$ electron promotion. The lowest-energy state from each of the four C$_2$ symmetry species is dominated by this type of valence-hole configuration at its equilibrium internuclear separation. As a result of their large binding energy (nominal bond order of 3) and correlation with the 2s$^2$2p$^2$+2s2p$^3$ separated-atom configurations, the presence of these valence-hole configurations has a profound impact on the $global$ electronic structure and unimolecular dynamics of C$_2$.

physics.chem-ph↗

arXiv2022

Singlet Fission Photovoltaics: Progress and Promising Pathways

Singlet fission is a form of multiple exciton generation which occurs in organic chromophores when a high energy singlet exciton separates into two lower energy triplet excitons, each with approximately half the singlet energy. Since this process is spin-allowed it can proceed on an ultrafast timescale of less than several picoseconds, outcompeting most other loss mechanisms and reaching quantitative yields approaching 200%. Due to this high quantum efficiency, the singlet fission process shows promise as a means of reducing thermalisation losses in photovoltaic cells. This would potentially allow for efficiency improvements beyond the thermodynamic limit in a single junction cell. Efforts to incorporate this process into solar photovoltaic cells have spanned a wide range of device structures over the past decade. In this review we compare and categorise these attempts in order to assess the state of the field and identify the most promising avenues of future research and development.

physics.app-ph↗

arXiv2019

Photochemical Upconversion Theory: Importance of Triplet Energy Levels and Triplet Quenching

Photochemical upconversion is a promising way to boost the efficiency of solar cells using triplet exciton annihilation. Currently, predicting the performance of photochemical upconversion devices is challenging. We present an open source software package which takes experimental parameters as inputs and gives the figure of merit of an upconversion system, enabling theory-driven design of better solar energy devices. We incorporate the statistical distribution of triplet excitons between the sensitizer and the emitter. Using the dynamic quenching effect of the sensitizer on emitter triplet excitons, we show that the optimal sensitizer concentration can be below the sensitizer solubility limit in liquid devices. These theoretical contributions can explain, without use of heavy atom-induced triplet exciton formation or phenyl group rotation, the experimental failure of zinc octaethylporphyrin to effectively sensitize diphenylanthracene, where platinum octaethylporphyrin succeeds. Our predictions indicate a change in direction for device design that will reduce triplet exciton losses.

cond-mat.mtrl-sci↗

arXiv2019

First-Principles Calculation of Triplet Exciton Diffusion in Crystalline Poly($p$-phenylene vinylene)

Understanding and controlling exciton transport is a strategic way to enhance the optoelectronic properties of high-performance organic devices. In this article we study triplet exciton migration in crystalline poly($p$-phenylene vinylene) polymer (PPV) using comprehensive electronic structure and quantum dynamical methods. We solve the coupled electron-nuclear dynamics for the triplet energy migrating between two neighboring Frenkel sites in J- and H-aggregate arrangements. From the two-site model we extract key parameters for use with a master-equation approach that allows us to treat nanosize systems where time-dependent Schr\"odinger equation becomes intractable. We calculate the transient exciton density evolution and determine the diffusion constants along the principal crystal axes of the PPV. The triplet diffusion is characterized by two distinctive components: fast intrachain, and slow interchain. At room temperature the interchain diffusion coefficients are found to be $D_a=0.89\cdot10^{-2}$ cm$^2$s$^{-1}$ and $D_b=1.49\cdot10^{-2}$ cm$^2$s$^{-1}$ along the respective $\bar{a}$- and $\bar{b}$-axes, and the intrachain is $D_c=3.03$ cm$^2$s$^{-1}$ along the fast $\bar{c}$-axis. The exceptionally high exciton mobility along the $\pi$-conjugated backbone facilitates rapid triplet migration over long distances. Our results can be utilized in the design of efficient energy conversion and light-emitting devices with desired solid-state properties.

cond-mat.mtrl-sci↗

arXiv2017

Endothermic singlet fission does not proceed via an excimer intermediate

Singlet fission is a process whereby two triplet excitons can be produced from one photon, potentially increasing the efficiency of photovoltaic devices. Endothermic singlet fission is desired for maximum energy conversion efficiency, and such systems have been shown to form an excimer-like state with multi-excitonic character prior to the appearance of triplets. However, the role of the excimer as an intermediate has, until now, been unclear. Here we show, using 5,12-bis((triisopropylsilyl)ethynyl)tetracene in solution as a prototypical example, that, rather than acting as an intermediate, the excimer serves to trap excited states, to the detriment of singlet fission yield. We clearly demonstrate that singlet fission and its conjugate process, triplet-triplet annihilation, occur at a longer intermolecular distance than an excimer intermediate would impute. These results establish that an endothermic singlet fission material must be designed that avoids excimer formation, thus allowing singlet fission to reach its full potential in enhancing photovoltaic energy conversion.

physics.chem-ph↗

arXiv2012

Line strengths and updated molecular constants for the C2 Swan system

New rotational line strengths for the C2 Swan system have been calculated for vibrational bands with v'=0-10 and v"=0-9, and J values up to J=34-96, based on previous observations in 30 vibrational bands. Line positions from several sources were combined with the results from recent deperturbation studies of the v'=4 and v'=6 states, and a weighted global least squares fit was performed. We report the updated molecular constants. The line strengths are based on a recent ab initio calculation of the transition dipole moment function. A line list has been made available, including observed and calculated line positions, Einstein A coefficients and oscillator strengths (f-values). The line list will be useful for astronomers and combustion scientists who utilize C2 Swan spectra. Einstein A coefficients and f-values were also calculated for the vibrational bands of the Swan system.

astro-ph.SR↗

arXiv2008

The optical spectrum of a large isolated polycyclic aromatic hydrocarbon: hexa-peri-hexabenzocoronene, C42H18

The first optical spectrum of an isolated polycyclic aromatic hydrocarbon large enough to survive the photophysical conditions of the interstellar medium is reported. Vibronic bands of the first electronic transition of the all benzenoid polycyclic aromatic hydrocarbon hexa-peri-hexabenzocoronene were observed in the 4080-4530 Angstrom range by resonant 2-color 2-photon ionization spectroscopy. The strongest feature at 4264 Angstrom is estimated to have an oscillator strength of f=1.4x10^-3, placing an upper limit on the interstellar abundance of this polycyclic aromatic hydrocarbon at 4x10^12 cm^-2, accounting for a maximum of ~0.02% of interstellar carbon. This study opens up the possibility to rigorously test neutral polycyclic aromatic hydrocarbons as carriers of the diffuse interstellar bands in the near future.

astro-ph↗