arXiv subjects

Tianyu Wo

Publications and source records attributed to Tianyu Wo.

At least 19 recordsLinked to original sources

arXiv2026

DeepShare: Assurance-Driven Deep Learning Job Scheduling for Multi-Tenant Clusters

Multi-tenant GPU clusters frequently remain underutilized even when tenants experience long queueing delays, because quota control, queue ordering, preemption, and GPU sharing are driven by different local signals. We present DeepShare, a scheduler that uses a continuous tenant-assurance signal to coordinate these decisions at runtime. DeepShare combines elastic quota borrowing, tenant-specific runtime prediction, cost-aware best-effort preemption, and interference-aware MPS colocation, while using the same assurance signal to decide when borrowed capacity should be reclaimed and when sharing should become more conservative. In trace-driven experiments on 23,859 Venus jobs and 3,200 internal jobs, DeepShare achieves an average GPU utilization of 70.58%, a 29.5% improvement over the strongest non-intrusive sharing baseline, while reducing average queueing delay by 46%. On a 16-GPU Kubernetes testbed, it reduces the average job completion time by 34% and maintains 93% QoS compliance for guaranteed tenants. These results show that treating tenant assurance as a runtime control loop achieves a more advantageous utilization-QoS trade-off than optimizing quotas, scheduling, and resource sharing independently.

cs.DC↗

arXiv2026

Latency-Aware Orchestration for Multi-Agent LLM Workflows on Heterogeneous GPUs

Concurrent multi-agent workflows expose future dependencies and serving-state requirements while running on heterogeneous GPU pools with time-varying load, model residency, and resource availability. The logical workflow defines the required computation, whereas its physical scheduling units, model-lifecycle actions, resource ordering, and placement must be selected according to the observed pool state. We present a prediction-guided runtime that uses workflow forecasts to construct and optimize a physical execution graph. Predictor estimates device-specific activation latency, peak memory, and model-loading cost, then propagates these predictions through workflow dependencies to forecast activation readiness and future model demand. Constructor builds semantics-preserving fusion and model-lifecycle alternatives, while Scheduler jointly optimizes their selection, placement, and execution order based on the live pool state. Across a workload spanning three workflow scenarios on a heterogeneous GPU pool, our system reduces end-to-end makespan and overall p95 completion latency under burst arrivals by up to 36.8% and 25.9%, respectively, over state-of-the-art workflow schedulers. It also saves up to 24.63 GPU-s per completed session.

cs.DC↗

arXiv2026

ElastiCo: Elastic Configuration and Interference-Aware Orchestration for GPU Clusters

Modern GPU clusters must simultaneously serve deep learning training and offline large language model inference workloads, yet existing schedulers treat these as isolated resource consumers with rigid, static allocations. This leaves substantial GPU capacity underutilized: training jobs reserve entire devices despite periodic idle phases, while offline inference tasks over-provision GPUs despite bursty demand patterns. We present ElastiCo, an elastic co-location framework that enables training and inference workloads to safely share GPUs through three integrated mechanisms. First, Resource Shape Transformation exposes each job as a family of feasible resource-performance configurations. Second, Elastic Shadow Pricing decomposes the resulting multi-resource allocation problem into per-job configuration selection subproblems via dynamic per-resource shadow prices. Third, Interference-Aware Co-location uses a predictor trained on hardware-counter and task-level features to estimate pairwise performance degradation under GPU sharing. Implemented as native Kubernetes middleware requiring no user-code modifications, ElastiCo is evaluated on a 64-GPU testbed and through large-scale trace-driven simulations (up to 512 GPUs), reducing the average JCT by up to 2.94x, increasing the cluster throughput by 2.02x, and increasing the GPU utilization from approximately 25% to 46%.

cs.DC↗

arXiv2026

SpecBox: Speculative Sandbox Scheduling for Efficient LLM Agent Serving

As LLM agents increasingly rely on the Model Context Protocol (MCP) to invoke isolated external sandboxes, disaggregated sandbox deployment introduces a fundamental tension between resource utilization and interactive tail latency. Persistent long-lived sandbox reservations incur excessive memory overhead at scale, while lazy on-demand instantiation generates severe cold-start penalties that degrade response performance under multi-tenant, multi-turn agent workloads. To resolve this dilemma, we present SpecBox, a runtime built around speculative sandbox preallocation tailored for dynamic LLM agent execution pipelines. At its core, SpecBox implements keyword matching and streaming semantic embedding to enable intent-driven sandbox prewarming, which identifies pending tool execution demands mid-LLM token generation and fully overlaps sandbox bootstrapping with model inference. To extend prewarming windows across sequential agent steps, the framework leverages context-aware stochastic prefetching atop a sandbox dependency graph to probabilistically forecast future sandbox switches ahead of execution. We complement these speculative mechanisms with two orthogonal optimizations: a semantic result cache that prunes redundant repeated sandbox invocations, and a dedicated out-of-band shared-memory transport plane that bypasses conventional network serialization to deliver zero-copy artifact transfers. Evaluated on high-concurrency multi-turn agent traces, our prototype demonstrates that SpecBox cuts P99 end-to-end latency by up to $2.9\times$ relative to the on-demand sandbox baseline, while slashing peak memory consumption by $45.9\%$ compared to permanently reserved sandbox deployments.

cs.DC↗

arXiv2026

CAPMix: Robust KPI Anomaly Detection for AIOps in Noisy and Dynamic Environments

Time-series anomaly detection is crucial in AIOps for maintaining large-scale service reliability. In production, streams of Key Performance Indicators (KPI) are high-dimensional, non-stationary, and affected by noise, deployment changes, and latent anomalies, making real failures hard to distinguish from benign variation. Most existing methods assume either normality (learning from "normal" history) or rely on injected anomalies for training. Yet injected patterns often misalign with real failure modes, skewing decision boundaries -- aka. Anomaly Shift. We propose CAPMix, a controllable anomaly augmentation framework with prior-guided injection for realistic temporal behaviors. CAPMix combines label revision and dual-space mixup to enhance robustness under contaminated and mixed data. CAPMix consistently outperforms state-of-the-art methods on public AIOps and time-series benchmarks. It has been deployed in Kuaishou's large-scale production system, reducing false alarms and improving monitoring reliability. A real-world dataset is also released to enrich the research on robust KPI anomaly detection.

cs.LG↗

arXiv2026

CrossPool: Efficient Multi-LLM Serving for Cold MoE Models through KV-Cache and Weight Disaggregation

Emerging LLM services increasingly host many sparse MoE models, yet most models receive sparse requests and remain cold. This creates a GPU memory problem: model weights are stable and model-determined, while KV-cache is transient and demand-determined. Because cold models rarely reach peak KV-cache demand at the same time, reserving worst-case KV capacity per model wastes memory; a shared KV-cache pool can instead provision aggregate active demand. However, KV-cache sharing is not sufficient when weights and KV-cache remain in a monolithic GPU memory pool. Static weights compete with dynamic KV-cache, and KV-head-limited attention under cold, low-concurrency traffic exposes only a fraction of replicated KV capacity, leading to low GPU memory utilization and weak long-context support. We present CrossPool, a serving engine for cold MoE models that separates FFN weights and KV-cache into two GPU memory pools: a weights pool that consolidates FFN weights across cold models, and a KV-cache pool that dynamically serves active requests while keeping attention local to KV-cache. CrossPool combines a KV-cache planner and virtualizer, a layer-wise pipeline scheduler that hides hidden-state transfers, and persistent kernels with control lowering to reduce CPU-GPU control overhead. With efficient GPU memory pooling, CrossPool underpins bursty long-context requests and outperforms the state-of-the-art kvcached-based multi-LLM serving system, reducing P99 TBT by up to 10.4x.

cs.DC↗

arXiv2026

Maestro: Workload-Aware Cross-Cluster Scheduling for LLM-Based Multi-Agent Systems

Large Language Model based Multi-Agent Systems (LLM-MAS) have emerged as a powerful paradigm for tackling complex tasks by breaking them into collaborative workflows of specialized LLM-powered agents. However, deploying such multi-agent workloads at scale poses significant system challenges. Each user query spawns an iterative pipeline of LLM calls, greatly amplifying resource consumption compared to single-turn queries. In resource-constrained cloud settings, these workflows face non-deterministic and input-dependent costs at decode stage, heavy-tailed multi-model requirements with memory fragmentation and over-provisioning, and cross-cluster scheduling trade-offs. We present Maestro, a workload-aware scheduling system designed for LLM-MAS serving under strict GPU budgets. Maestro explicitly leverages agent semantics and roles: it predicts the output length and memory usage of each stage and uses this prediction to drive a hierarchical scheduler. At the node level, Maestro enables dynamic multi-model co-location via hierarchical weight caching and elastic memory provisioning. At the cluster level, it performs latency-aware routing to avoid cold-start delays and memory overloads. At the global level, it enforces workflow-aware prioritization to minimize head-of-line blocking for interactive tasks. Across prototype experiments and trace-driven simulations, Maestro reduces KV-reservation HBM by 67.2% and improves high-contention SLO attainment over EDF by 23.6 percentage points.

cs.DC↗

arXiv2026

RobotDiffuse: Diffusion-Based Motion Planning for Redundant Manipulators with the ROP Obstacle Avoidance Dataset

Redundant manipulators, with their higher Degrees of Freedom (DoFs), offer enhanced kinematic performance and versatility, making them suitable for applications like manufacturing, surgical robotics, and human-robot collaboration. However, motion planning for these manipulators is challenging due to increased DoFs and complex, dynamic environments. While traditional motion planning algorithms struggle with high-dimensional spaces, deep learning-based methods often face instability and inefficiency in complex tasks. This paper introduces RobotDiffuse, a diffusion model-based approach for motion planning in redundant manipulators. By integrating physical constraints with a point cloud encoder and replacing the U-Net structure with an encoder-only transformer, RobotDiffuse improves the model's ability to capture temporal dependencies and generate smoother, more coherent motion plans. We validate the approach using a complex simulator and release a new dataset, Robot-obtalcles-panda (ROP), with 35M robot poses and 0.14M obstacle avoidance scenarios. The highest overall score obtained in the experiment demonstrates the effectiveness of RobotDiffuse and the promise of diffusion models for motion planning tasks. The dataset can be accessed at https://github.com/ACRoboT-buaa/RobotDiffuse.

cs.RO↗

arXiv2025

Eq.Bot: Enhance Robotic Manipulation Learning via Group Equivariant Canonicalization

Robotic manipulation systems are increasingly deployed across diverse domains. Yet existing multi-modal learning frameworks lack inherent guarantees of geometric consistency, struggling to handle spatial transformations such as rotations and translations. While recent works attempt to introduce equivariance through bespoke architectural modifications, these methods suffer from high implementation complexity, computational cost, and poor portability. Inspired by human cognitive processes in spatial reasoning, we propose Eq.Bot, a universal canonicalization framework grounded in SE(2) group equivariant theory for robotic manipulation learning. Our framework transforms observations into a canonical space, applies an existing policy, and maps the resulting actions back to the original space. As a model-agnostic solution, Eq.Bot aims to endow models with spatial equivariance without requiring architectural modifications. Extensive experiments demonstrate the superiority of Eq.Bot under both CNN-based (e.g., CLIPort) and Transformer-based (e.g., OpenVLA-OFT) architectures over existing methods on various robotic manipulation tasks, where the most significant improvement can reach 50.0%.

cs.RO↗

arXiv2025

MathSE: Improving Multimodal Mathematical Reasoning via Self-Evolving Iterative Reflection and Reward-Guided Fine-Tuning

Multimodal large language models (MLLMs) have demonstrated remarkable capabilities in vision-language answering tasks. Despite their strengths, these models often encounter challenges in achieving complex reasoning tasks such as mathematical problem-solving. Previous works have focused on fine-tuning on specialized mathematical datasets. However, these datasets are typically distilled directly from teacher models, which capture only static reasoning patterns and leaving substantial gaps compared to student models. This reliance on fixed teacher-derived datasets not only restricts the model's ability to adapt to novel or more intricate questions that extend beyond the confines of the training data, but also lacks the iterative depth needed for robust generalization. To overcome these limitations, we propose \textbf{\method}, a \textbf{Math}ematical \textbf{S}elf-\textbf{E}volving framework for MLLMs. In contrast to traditional one-shot fine-tuning paradigms, \method iteratively refines the model through cycles of inference, reflection, and reward-based feedback. Specifically, we leverage iterative fine-tuning by incorporating correct reasoning paths derived from previous-stage inference and integrating reflections from a specialized Outcome Reward Model (ORM). To verify the effectiveness of \method, we evaluate it on a suite of challenging benchmarks, demonstrating significant performance gains over backbone models. Notably, our experimental results on MathVL-test surpass the leading open-source multimodal mathematical reasoning model QVQ. Our code and models are available at \texttt{https://zheny2751\allowbreak-dotcom.github.io/\allowbreak MathSE.github.io/}.

cs.AI↗

arXiv2025

An Improved Time Series Anomaly Detection by Applying Structural Similarity

Effective anomaly detection in time series is pivotal for modern industrial applications and financial systems. Due to the scarcity of anomaly labels and the high cost of manual labeling, reconstruction-based unsupervised approaches have garnered considerable attention. However, accurate anomaly detection remains an unsettled challenge, since the optimization objectives of reconstruction-based methods merely rely on point-by-point distance measures, ignoring the potential structural characteristics of time series and thus failing to tackle complex pattern-wise anomalies. In this paper, we propose StrAD, a novel structure-enhanced anomaly detection approach to enrich the optimization objective by incorporating structural information hidden in the time series and steering the data reconstruction procedure to better capture such structural features. StrAD accommodates the trend, seasonality, and shape in the optimization objective of the reconstruction model to learn latent structural characteristics and capture the intrinsic pattern variation of time series. The proposed structure-aware optimization objective mechanism can assure the alignment between the original data and the reconstructed data in terms of structural features, thereby keeping consistency in global fluctuation and local characteristics. The mechanism is pluggable and applicable to any reconstruction-based methods, enhancing the model sensitivity to both point-wise anomalies and pattern-wise anomalies. Experimental results show that StrAD improves the performance of state-of-the-art reconstruction-based models across five real-world anomaly detection datasets.

cs.LG↗

arXiv2025

DECAMP: Towards Scene-Consistent Multi-Agent Motion Prediction with Disentangled Context-Aware Pre-Training

Trajectory prediction is a critical component of autonomous driving, essential for ensuring both safety and efficiency on the road. However, traditional approaches often struggle with the scarcity of labeled data and exhibit suboptimal performance in multi-agent prediction scenarios. To address these challenges, we introduce a disentangled context-aware pre-training framework for multi-agent motion prediction, named DECAMP. Unlike existing methods that entangle representation learning with pretext tasks, our framework decouples behavior pattern learning from latent feature reconstruction, prioritizing interpretable dynamics and thereby enhancing scene representation for downstream prediction. Additionally, our framework incorporates context-aware representation learning alongside collaborative spatial-motion pretext tasks, which enables joint optimization of structural and intentional reasoning while capturing the underlying dynamic intentions. Our experiments on the Argoverse 2 benchmark showcase the superior performance of our method, and the results attained underscore its effectiveness in multi-agent motion forecasting. To the best of our knowledge, this is the first context autoencoder framework for multi-agent motion forecasting in autonomous driving. The code and models will be made publicly available.

cs.RO↗

arXiv2025

RoCA: Robust Contrastive One-class Time Series Anomaly Detection with Contaminated Data

The accumulation of time-series signals and the absence of labels make time-series Anomaly Detection (AD) a self-supervised task of deep learning. Methods based on normality assumptions face the following three limitations: (1) A single assumption could hardly characterize the whole normality or lead to some deviation. (2) Some assumptions may go against the principle of AD. (3) Their basic assumption is that the training data is uncontaminated (free of anomalies), which is unrealistic in practice, leading to a decline in robustness. This paper proposes a novel robust approach, RoCA, which is the first to address all of the above three challenges, as far as we are aware. It fuses the separated assumptions of one-class classification and contrastive learning in a single training process to characterize a more complete so-called normality. Additionally, it monitors the training data and computes a carefully designed anomaly score throughout the training process. This score helps identify latent anomalies, which are then used to define the classification boundary, inspired by the concept of outlier exposure. The performance on AIOps datasets improved by 6% compared to when contamination was not considered (COCA). On two large and high-dimensional multivariate datasets, the performance increased by 5% to 10%. RoCA achieves the highest average performance on both univariate and multivariate datasets. The source code is available at https://github.com/ruiking04/RoCA.

cs.LG↗

arXiv2025

Motion Forecasting for Autonomous Vehicles: A Survey

In recent years, the field of autonomous driving has attracted increasingly significant public interest. Accurately forecasting the future behavior of various traffic participants is essential for the decision-making of Autonomous Vehicles (AVs). In this paper, we focus on both scenario-based and perception-based motion forecasting for AVs. We propose a formal problem formulation for motion forecasting and summarize the main challenges confronting this area of research. We also detail representative datasets and evaluation metrics pertinent to this field. Furthermore, this study classifies recent research into two main categories: supervised learning and self-supervised learning, reflecting the evolving paradigms in both scenario-based and perception-based motion forecasting. In the context of supervised learning, we thoroughly examine and analyze each key element of the methodology. For self-supervised learning, we summarize commonly adopted techniques. The paper concludes and discusses potential research directions, aiming to propel progress in this vital area of AV technology.

cs.RO↗

arXiv2024

LDPRecover: Recovering Frequencies from Poisoning Attacks against Local Differential Privacy

Local differential privacy (LDP), which enables an untrusted server to collect aggregated statistics from distributed users while protecting the privacy of those users, has been widely deployed in practice. However, LDP protocols for frequency estimation are vulnerable to poisoning attacks, in which an attacker can poison the aggregated frequencies by manipulating the data sent from malicious users. Therefore, it is an open challenge to recover the accurate aggregated frequencies from poisoned ones. In this work, we propose LDPRecover, a method that can recover accurate aggregated frequencies from poisoning attacks, even if the server does not learn the details of the attacks. In LDPRecover, we establish a genuine frequency estimator that theoretically guides the server to recover the frequencies aggregated from genuine users' data by eliminating the impact of malicious users' data in poisoned frequencies. Since the server has no idea of the attacks, we propose an adaptive attack to unify existing attacks and learn the statistics of the malicious data within this adaptive attack by exploiting the properties of LDP protocols. By taking the estimator and the learning statistics as constraints, we formulate the problem of recovering aggregated frequencies to approach the genuine ones as a constraint inference (CI) problem. Consequently, the server can obtain accurate aggregated frequencies by solving this problem optimally. Moreover, LDPRecover can serve as a frequency recovery paradigm that recovers more accurate aggregated frequencies by integrating attack details as new constraints in the CI problem. Our evaluation on two real-world datasets, three LDP protocols, and untargeted and targeted poisoning attacks shows that LDPRecover is both accurate and widely applicable against various poisoning attacks.

cs.CR↗

arXiv2023

Deep Contrastive One-Class Time Series Anomaly Detection

The accumulation of time-series data and the absence of labels make time-series Anomaly Detection (AD) a self-supervised deep learning task. Single-normality-assumption-based methods, which reveal only a certain aspect of the whole normality, are incapable of tasks involved with a large number of anomalies. Specifically, Contrastive Learning (CL) methods distance negative pairs, many of which consist of both normal samples, thus reducing the AD performance. Existing multi-normality-assumption-based methods are usually two-staged, firstly pre-training through certain tasks whose target may differ from AD, limiting their performance. To overcome the shortcomings, a deep Contrastive One-Class Anomaly detection method of time series (COCA) is proposed by authors, following the normality assumptions of CL and one-class classification. It treats the original and reconstructed representations as the positive pair of negative-sample-free CL, namely "sequence contrast". Next, invariance terms and variance terms compose a contrastive one-class loss function in which the loss of the assumptions is optimized by invariance terms simultaneously and the "hypersphere collapse" is prevented by variance terms. In addition, extensive experiments on two real-world time-series datasets show the superior performance of the proposed method achieves state-of-the-art.

cs.LG↗

arXiv2021

Passenger Mobility Prediction via Representation Learning for Dynamic Directed and Weighted Graph

In recent years, ride-hailing services have been increasingly prevalent as they provide huge convenience for passengers. As a fundamental problem, the timely prediction of passenger demands in different regions is vital for effective traffic flow control and route planning. As both spatial and temporal patterns are indispensable passenger demand prediction, relevant research has evolved from pure time series to graph-structured data for modeling historical passenger demand data, where a snapshot graph is constructed for each time slot by connecting region nodes via different relational edges (e.g., origin-destination relationship, geographical distance, etc.). Consequently, the spatiotemporal passenger demand records naturally carry dynamic patterns in the constructed graphs, where the edges also encode important information about the directions and volume (i.e., weights) of passenger demands between two connected regions. However, existing graph-based solutions fail to simultaneously consider those three crucial aspects of dynamic, directed, and weighted (DDW) graphs, leading to limited expressiveness when learning graph representations for passenger demand prediction. Therefore, we propose a novel spatiotemporal graph attention network, namely Gallat (Graph prediction with all attention) as a solution. In Gallat, by comprehensively incorporating those three intrinsic properties of DDW graphs, we build three attention layers to fully capture the spatiotemporal dependencies among different regions across all historical time slots. Moreover, the model employs a subtask to conduct pretraining so that it can obtain accurate results more quickly. We evaluate the proposed model on real-world datasets, and our experimental results demonstrate that Gallat outperforms the state-of-the-art approaches.

cs.LG↗

arXiv2017

One-Pass Error Bounded Trajectory Simplification

Nowadays, various sensors are collecting, storing and transmitting tremendous trajectory data, and it is known that raw trajectory data seriously wastes the storage, network band and computing resource. Line simplification (LS) algorithms are an effective approach to attacking this issue by compressing data points in a trajectory to a set of continuous line segments, and are commonly used in practice. However, existing LS algorithms are not sufficient for the needs of sensors in mobile devices. In this study, we first develop a one-pass error bounded trajectory simplification algorithm (OPERB), which scans each data point in a trajectory once and only once. We then propose an aggressive one-pass error bounded trajectory simplification algorithm (OPERB-A), which allows interpolating new data points into a trajectory under certain conditions. Finally, we experimentally verify that our approaches (OPERB and OPERB-A) are both efficient and effective, using four real-life trajectory datasets.

cs.DB↗