arXiv subjects

Thomas Wondrak

Publications and source records attributed to Thomas Wondrak.

7 recordsLinked to original sources

arXiv2025

Exchange-Biased multi-ring Planar Hall Magnetoresistive Sensors with nT resolution in Non-Shielded Environments

Planar Hall magnetoresistive sensors (PHMR) are promising candidates for various magnetic sensing applications due to their high sensitivity, low power consumption, and compatibility with integrated circuit technology. However, their performance is often limited by inherent noise sources, impacting their resolution and overall sensitivity. Here the effect of three bilayer structures NiFe(10 nm)/IrMn(10 nm), NiFe(30 nm)/IrMn(10 nm), and NiFe(30 nm)/IrMn(20 nm) on noise levels is investigated at low-frequency (DC - 25 Hz). This study includes a detailed investigation on the optimization process and noise characteristics of multiring PHMR sensors, focusing on identifying and quantifying the dominant noise sources. The experimental measurements are complemented by a theoretical analysis of noise sources including thermal noise, 1/f noise, intermixing and environmental noise. The best magnetic resolution is observed for the NiFe(30 nm)/IrMn(10 nm) structure, which achieves a detectivity below 1.5 nT/sqrt(Hz) at 10 Hz in a non-shielded environment at room temperature. In addition, a substantial improvement in sensitivity is observed by annealing the sensors at 250 deg C for 1 hour. The findings of this study contribute to a deeper understanding of noise behavior in PHMR sensors, paving the way for developing strategies to improve their performance for demanding sensing applications at low frequencies.

cond-mat.str-el↗

arXiv2023

Learning to reconstruct the bubble distribution with conductivity maps using Invertible Neural Networks and Error Diffusion

Electrolysis is crucial for eco-friendly hydrogen production, but gas bubbles generated during the process hinder reactions, reduce cell efficiency, and increase energy consumption. Additionally, these gas bubbles cause changes in the conductivity inside the cell, resulting in corresponding variations in the induced magnetic field around the cell. Therefore, measuring these gas bubble-induced magnetic field fluctuations using external magnetic sensors and solving the inverse problem of Biot-Savart Law allows for estimating the conductivity in the cell and, thus, bubble size and location. However, determining high-resolution conductivity maps from only a few induced magnetic field measurements is an ill-posed inverse problem. To overcome this, we exploit Invertible Neural Networks (INNs) to reconstruct the conductivity field. Our qualitative results and quantitative evaluation using random error diffusion show that INN achieves far superior performance compared to Tikhonov regularization.

eess.IV↗

arXiv2020

The Multivariate Extension of the Lomb-Scargle Method

The common methods of spectral analysis for multivariate ($n$-dimensional) time series, like discrete Frourier transform (FT) or Wavelet transform, are based on Fourier series to decompose discrete data into a set of trigonometric model components, e. g. amplitude and phase. Applied to discrete data with a finite range several limitations of (time discrete) FT can be observed which are caused by the orthogonality mismatch of the trigonometric basis functions on a finite interval. However, in the general situation of non-equidistant or fragmented sampling FT based methods will cause significant errors in the parameter estimation. Therefore, the classical Lomb-Scargle method (LSM), which is not based on Fourier series, was developed as a statistical tool for one dimensional data to circumvent the inconsistent and erroneous parameter estimation of FT. The present work deduces LSM for $n$-dimensional data sets by a redefinition of the shifting parameter $\tau$, to maintain orthogonality of the trigonometric basis. An analytical derivation shows, that $n$-D LSM extents the traditional 1D case preserving all the statistical benefits, such as the improved noise rejection. Here, we derive the parameter confidence intervals for LSM and compare it with FT. Applications with ideal test data and experimental data will illustrate and support the proposed method.

stat.ME↗

arXiv2017

Visualization of the global flow structure in a modified Rayleigh-Benard setup using contactless inductive flow tomography

Rayleigh-Benard convection is not only a classical problem in fluid dynamics but plays also an important role in many metallurgical and crystal growth applications. The measurement of the flow field and of the dynamics of the emerging large-scale circulation in liquid metals is a challenging task due to the opaqueness and the high temperature of the melts. Contactless inductive flow tomography is a technique to visualize the mean three-dimensional flow structure in liquid metals by measuring the flow induced magnetic field perturbations under the influence of one or several applied magnetic fields. In this paper, we present first measurements of the flow induced magnetic field in a Rayleigh-Benard setup, which are also used to investigate the dynamics of the large-scale circulation. Additionally, we investigate numerically the quality of the reconstruction of the three-dimensional flow field for different sensor configurations.

physics.flu-dyn↗

arXiv2012

Forward and inverse problems in fundamental and applied magnetohydrodynamics

This Minireview summarizes the recent efforts to solve forward and inverse problems as they occur in different branches of fundamental and applied magnetohydrodynamics. As for the forward problem, the main focus is on the numerical treatment of induction processes, including self-excitation of magnetic fields in non-spherical domains and/or under the influence of non-homogeneous material parameters. As an important application of the developed numerical schemes, the functioning of the von-K\'{a}rm\'{a}n-sodium (VKS) dynamo experiment is shown to depend crucially on the presence of soft-iron impellers. As for the inverse problem, the main focus is on the mathematical background and some first practical applications of the Contactless Inductive Flow Tomography (CIFT), in which flow induced magnetic field perturbations are utilized for the reconstruction of the velocity field. The promises of CIFT for flow field monitoring in the continuous casting of steel are substantiated by results obtained at a test rig with a low melting liquid metal. While CIFT is presently restricted to flows with low magnetic Reynolds numbers, some selected problems of non-linear inverse dynamo theory, with possible application to geo- and astrophysics, are also discussed.

physics.flu-dyn↗

arXiv2012

Numerical simulation of the Tayler instability in liquid metals

The electrical current through an incompressible, viscous and resistive liquid conductor produces an azimuthal magnetic field that becomes unstable when the corresponding Hartmann number exceeds a critical value in the order of 20. This Tayler instability, which is not only discussed as a key ingredient of a non-linear stellar dynamo model (Tayler-Spruit dynamo), but also as a limiting factor for the maximum size of large liquid metal batteries, was recently observed experimentally in a column of a liquid metal (Seilmayer et al., Phys. Rev. Lett. 108, 244501, 2012}. On the basis of an integro-differential equation approach, we have developed a fully three-dimensional numerical code, and have utilized it for the simulation of the Tayler instability at typical viscosities and resistivities of liquid metals. The resulting growth rates are in good agreement with the experimental data. We illustrate the capabilities of the code for the detailed simulation of liquid metal battery problems in realistic geometries.

astro-ph.SR↗

arXiv2011

Integral equations in MHD: theory and application

The induction equation of kinematic magnetohydrodynamics is mathematically equivalent to a system of integral equations for the magnetic field in the bulk of the fluid and for the electric potential at its boundary. We summarize the recent developments concerning the numerical implementation of this scheme and its applications to various forward and inverse problems in dynamo theory and applied MHD.

physics.flu-dyn↗