arXiv Science⌕ Search

arXiv subjects

Thomas Renger

Publications and source records attributed to Thomas Renger.

6 recordsLinked to original sources

Radiation Hardness Assurance of Optical Coatings for the COMPASSO Iodine Reference

The COMPASSO payload demonstrates compact iodine-based optical frequency references on the International Space Station (ISS), requiring optical windows and antireflective coatings that remain stable in the Low Earth Orbit (LEO) radiation environment. Radiation analysis was performed to quantify how trapped electrons, protons, and ions affect the fused-silica iodine cell and its coatings under mission-relevant shielding and exposure scenarios. The aim was to determine whether selected coatings meet the COMPASSO optical requirements after realistic LEO irradiation, identify degradation mechanisms linked to deposition technology and materials, and provide selection and qualification guidance for coatings in spaceborne iodine spectroscopy and precision optical-clock payloads. Nominal and worst-case electron, proton, and heavy-ion flux and fluence spectra for the ISS orbit were derived using the AE8/AP8, CREME96, ESP, and ISO15390 models. The ion component was assessed by simulation only, while irradiation tests used electrons and protons. Eight coating stacks produced by different deposition methods were exposed to proton and electron irradiation corresponding to nominal and worst-case mission loads. Pre- and post-irradiation characterization included reflectance and transmittance measurements, together with visual and microscopic inspection of coating integrity. These tests led to the selection of a four-layer Ta$_2$O$_5$/SiO$_2$ stack, which was used to produce the iodine cell optical window. Deposited and transferred particle fluences were calculated for this coating and all particle species, and the total ionizing dose (TID) in each layer was derived with GRAS. The selected coating will not be affected by corpuscular radiation for years in the ISS LEO environment, and the TID expected at the ISS Bartolomeo platform will not affect its optical properties.

physics.space-ph↗

Role of enviromental dynamic polarizability in static excited state properties of embedded molecular systems: Application to disordered fluorographene systems

We present an extension of the standard polarizable quantum mechanic/molecular mechanics (QM/MM) approach for treating environmental effects on excited state properties of embedded systems. A quantum polarizable atom model is derived from a full quantum description of the environment using perturbation theory for the system-environment coupling. Our model provides a more general description of the environment, including frequency dependent atomic polarizabilities, without loss of computational simplicity of the QM/MM approach. The classical polarizable atom description used in polarizable QM/MM approach can be obtained as a limiting case of the present model. This enables us to pinpoint approximations and assumptions about the system inherent to classical polarizable atom description of the environment. We apply our method to fluorographene (FG) based systems to investigate effects of the FG sheet on excited state properties of impurities on the FG surface. Comparison to full quantum chemistry calculations and to the standard polarizable QM/MM approach on disordered fluorograhene clusters reveals the importance of frequency dependence of atomic polarizabilities for the proper treatment of the effects of the environment on both the transition energy shifts and the interaction energies.

physics.chem-ph↗

Site-dependence of van der Waals interaction explains exciton spectra of double-walled tubular J-aggregates

The simulation of the optical properties of supramolecular aggregates requires the development of methods, which are able to treat a large number of coupled chromophores interacting with the environment. Since it is currently not possible to treat large systems by quantum chemistry, the Frenkel exciton model is a valuable alternative. In this work we show how the Frenkel exciton model can be extended in order to explain the excitonic spectra of a specific double-walled tubular dye aggregate explicitly taking into account dispersive energy shifts of ground and excited states due to van der Waals interaction with all surrounding molecules. The experimentally observed splitting is well explained by the site-dependent energy shift of molecules placed at the inner or outer side of the double-walled tube, respectively. Therefore we can conclude, that inclusion of the site-dependent dispersive effect in the theoretical description of optical properties of nanoscaled dye aggregates is mandatory.

physics.chem-ph↗

Calculating optical absorption spectra of thin polycrystalline films: Structural disorder and site-dependent van der Waals interaction

We propose a new approach for calculating the change of the absorption spectrum of a molecule when moved from the gas phase to a crystalline morphology. The so-called gas-to-crystal shift $Δ{\cal E}_m$ is mainly caused by dispersion effects and depends sensitively on the molecule's specific position in the nanoscopic setting. Using an extended dipole approximation, we are able to divide $Δ{\cal E}_m= -Q W_{m}$ in two factors where $Q$ depends only on the molecular species and accounts for all non-resonant electronic transitions contributing to the dispersion, while $W_m$ is a sum running over the position of all molecules expressing the site-dependence of the shift in a given molecular structure. The ability of our approach to predict absorption spectra is demonstrated using the example of polycrystalline films of 3,4,9,10-perylene-tetracarboxylic-diimide (PTCDI).

cond-mat.mtrl-sci↗

The Complex Irradiation Facility at DLR-Bremen

All material exposed to interplanetary space conditions are subject to degradation processes. For obvious reasons there is a great interest to study these processes for materials that are used in satellite construction. However, also the influence of particle and electromagnetic radiation on the weathering of extraterrestrial rocks and on organic and biological tissues is the research topic of various scientific disciplines. To strengthen the comprehensive and systematic investigation of degradation processes a new laboratory, the complex irradiation facility (CIF), has been designed, set up, tested, and put into operation at the DLR-Institute of Space Systems in Bremen (Germany). The CIF allows the simultaneous irradiation with three light sources and with a dual beam irradiation system for the bombardment of materials with electrons and protons having energies up to 100 keV. It is eminently suitable to perform a large variety of irradiation procedures that are similar to those which appear at different distances to the Sun. This paper is devoted to potential users in order to inform them about the capabilities of the CIF.

physics.ins-det↗

Design and performance of a vacuum-UV simulator for material testing under space conditions

This paper describes the construction and performance of a VUV-simulator that has been designed to study degradation of materials under space conditions. It is part of the Complex Irradiation Facility at DLR in Bremen, Germany, that has been built for testing of material under irradiation in the complete UV-range as well as under proton and electron irradiation. Presently available UV-sources used for material tests do not allow the irradiation with wavelengths smaller than about $115$ nm where common Deuterium lamps show an intensity cut-off. The VUV-simulator generates radiation by excitation of a gas-flow with an electron beam. The intensity of the radiation can be varied by manipulating the gas-flow and/or the electron beam. The VUV simulator has been calibrated at three different gas-flow settings in the range from $40$ nm to $410$ nm. The calibration has been made by the Physikalisch-Technische Bundesanstalt (PTB) in Berlin. The measured spectra show total irradiance intensities from $24$ to $58$ mW$\rm{m^{-2}}$ (see Table 4.2) in the VUV-range, i.e. for wavelengths smaller than $200$ nm. They exhibit a large number of spectral lines generated either by the gas-flow constituents or by metal atoms in the residual gas which come from metals used in the source construction. In the range from $40$ nm to $120$ nm where Deuterium lamps are not usable, acceleration factors of $3$ to $26.3$ Solar Constants are reached depending on the gas-flow setting. The VUV-simulator allows studies of general degradation effects caused by photoionization and photodissociation as well as accelerated degradation tests by use of intensities that are significantly higher compared to that of the Sun at $1$ AU.

physics.ins-det↗