arXiv subjects

Thomas McIntosh

Publications and source records attributed to Thomas McIntosh.

3 recordsLinked to original sources

arXiv2026

NIRC2-Pol: First Light of Near-Infrared Polarimetry on Keck II

NIRC2, the Near Infrared Camera 2 on the Keck II telescope, was recently upgraded with a new suite of polarimetric observing modes. The new polarimetry modes (referred to as NIRC2-Pol) open up a wide range of new studies, including investigations of exoplanets, the Galactic center, active galactic nuclei, and solar system objects. The new modes enabled by the upgrade span the 1.1 to 4.1 micron range (i.e. J through L' bands) and include imaging polarimetry, coronagraphic imaging polarimetry, and spectropolarimetry. NIRC2-Pol is unique, as Keck II is the largest telescope (10 m) on which AO-fed infrared polarimetry capabilities are available, one of few with L' polarimetric imaging, and the only one where there is both a polarimetric mode and a vortex coronagraph. Here, we introduce the design of NIRC2-Pol, its capabilities, and its current operational status. We also present its first on-sky results: the first L' polarimetric images of the AB Aurigae circumstellar disk. These images more clearly reveal the disk's iconic spiral arms than previous L' total intensity imaging.

astro-ph.IM↗

arXiv2026

Enabling Quantitative Polarimetry for Keck/NIRC2: Preliminary Mueller Matrix Model Calibration

The Keck/NIRC2 infrared imager was upgraded in 2025 with dual-beam polarimetric observing modes spanning approximately 1.1--4.1 microns (JHKL' bands). We present a preliminary JHK calibration of NIRC2 Polarimetry using a wavelength-dependent Mueller matrix model of the Keck tertiary mirror (M3), half-wave plate (HWP), image rotator (IMR), downstream optics, and Wollaston prism. We constrain the model downstream of M3 using dome flat sequences spanning ten HWP and nine IMR angles in each band. Although the model reproduces the dominant modulation, the residuals show structure dependent on HWP and IMR angle. Measurement matrix inversion of unpolarized standard star observations gives M3 diattenuations of 0.0119+/-0.0009, 0.0098+/-0.0004, and 0.0068+/-0.0005 in J, H, and Kp, substantially closer to Fresnel predictions for aluminum than the values derived from dome flats. The larger dome flat modulation may indicate polarization in the incident dome illumination or Mueller matrix model inaccuracies. These results establish an initial calibration framework while motivating improved input polarization constraints, fixed HWP parameters from previous laboratory measurements, model validation with polarized standard stars, and extension to L'.

astro-ph.IM↗

arXiv2026

Updating the SCExAO/CHARIS polarimetric calibration following the Nasmyth beam-switcher upgrade

Subaru/SCExAO/CHARIS enables near-infrared integral field spectropolarimetry. Quantitative polarimetry is useful for a variety of science cases, particularly measurements related to dust grain properties in circumstellar disks. This capability requires correcting for polarization effects from the optical path via a Mueller matrix model. We present an updated model accounting for the recently installed SCExAO near-infrared wavefront sensor YJH50 dichroic beamsplitter and the major Subaru Nasmyth beam-switcher upgrade. Using internal light source measurements from before and after the beam switcher installation, we find an elliptical retarder model for the image derotator improves polarimetric accuracy over the previous linear retarder model. We additionally find the YJH50 dichroic produces faint polarization effects that we cannot characterize with our Mueller matrix modeling capabilities, and that the Nasmyth beam-switcher has minimal polarization effects other than inducing a sign flip in Q and V polarized light. Using unpolarized standard star calibration measurements, we fit the diattenuation of Subaru's tertiary mirror as a function of wavelength and find that the diattenuation has increased since the previous CHARIS calibration. We calculate that the polarimetric accuracy of the model in the degree of linear polarization ranges from 0.02% to 0.12% for a 1% polarized target. This model update will soon be incorporated into CHARIS's data processing pipeline, and should be used for any polarimetric data taken after the Nasmyth beam-switcher update in October 2025. Additionally, we provide the code for this calibration as part of an open-source Python package for polarimetric calibration called pyPolCal, enabling straightforward re-calibration of the system after any future changes, e.g. the recent recoating of M3.

astro-ph.IM↗