arXiv subjects

Theodore S. Rappaport

Publications and source records attributed to Theodore S. Rappaport.

At least 19 recordsLinked to original sources

arXiv2026

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

eess.SP↗

arXiv2026

Omnidirectional UMi Path Loss Models for 3GPP Extension Above 100 GHz Using Extensive Empirical Data Sets from 6.75 to 142 GHz

Extending standardized urban microcell (UMi) path loss (PL) models from the upper mid-band (FR3) to sub-terahertz (sub-THz) frequencies requires measurement-based comparisons spanning a wide spectral range within a unified framework. In this paper, we derive single- and multi-frequency omnidirectional PL models for UMi environments based on extensive NYU WIRELESS measurements at 6.75, 16.95, 28, 73, and 142 GHz in line-of-sight (LOS) and non-line-of-sight (NLOS) conditions. Single-frequency close-in (CI) and floating-intercept (FI) models for each band show that CI yields more stable and physically interpretable parameters, with shadow fading standard deviations within 0.98 dB of FI across all five frequencies. We then extend the multi-frequency PL analysis to the 7-24 GHz, 0.5-100 GHz, and 0.5-150 GHz frequency ranges using CI, close-in with frequency weighting (CIF), and alpha-beta-gamma (ABG) models. Across progressively wider frequency spans, CI and CIF maintain stable distance exponents that remain closely aligned with the 3rd Generation Partnership Project (3GPP) UMi interpretations, whereas ABG offers only very modest reductions in fitting error at the cost of much greater parameter sensitivity. These results support physically anchored CI/CIF formulations with a close-in free space path loss anchor point at 1 m in order to extend 3GPP-oriented UMi PL models over the entire 0.5 to 150 GHz frequency range.

eess.SP↗

arXiv2026

SPARC: Sparse Path-Aware Residual Calibrator for Wireless Ray Tracing at Upper Mid-Band

Accurate site-specific ray tracing (RT) is essential for upper mid-band network planning, yet raw RT can produce per-path multipath component (MPC) power errors on the order of 19--24~dB in cluttered indoor environments. A fixed-geometry material-sensitivity bound shows that a 30% relative-permittivity perturbation changes each surface interaction by at most 6.28~dB across the considered indoor materials. However, even MPCs with only one surface interaction exhibit a 19.2~dB mean RT--measurement bias, suggesting that missing clutter, displaced surfaces, and simplified 3D geometry dominate the per-path RT error. We propose SPARC (Sparse Path-Aware Residual Calibrator), a lightweight per-path calibration method that learns a sparse linear residual model from one completed RT simulation. SPARC uses standard RT features selected per fold by nested cross-validation, with ridge regularization and power-gated path matching; four features recur in both environments. Using measured indoor factory (InF) and indoor hotspot (InH) datasets at 6.75 and 16.95~GHz, SPARC reduces per-path power RMSE from 18.74 to 4.74~dB in InF and from 23.12 to 5.39~dB in InH. A jointly trained InF+InH model achieves 5.73~dB RMSE. When all links from one transmitter location are held out for testing, SPARC achieves 4.99~dB RMSE in InF and 5.85~dB RMSE in InH. SPARC therefore provides a practical post-processing calibration layer for site-specific per-path power prediction without ray-tracer modification or additional RT runs.

eess.SP↗

arXiv2026

The Anatomy of RF Chains: Metrics, Measures, and Operating Efficiency

In 1958, Haus and Adler [1] introduced the concept of noise measure. Noise measure is a single quantitative metric that provides a comprehensive basis for comparing devices (individual circuits or outcomes of optimization iterations) in terms of their contribution to overall system noise by incorporating both noise factor and available power gain. Unlike noise factor alone, which reflects how much a device degrades the signal-to-noise ratio, noise measure captures the trade-off between noise and gain, making it a system-aware metric. This distinction is especially important when comparing devices in multistage systems, where both parameters jointly influence the overall system noise. Building on Haus and Adler's work, this article aims to advance RF system design by extending traditional device metrics, such as noise factor and noise measure, with new system-aware metrics: linearity, dynamic range, power efficiency, and waste measures. These new measures are interpretable, computable, and cascadable, making them well-suited for comparing the impact of individual devices or tracking the convergence of circuit design iterations on overall system-level performance. Additionally, a new metric--operating efficiency--is introduced, which unifies power efficiency, dynamic range, and data rate by incorporating signal statistics and variability in communication circuits and systems. Operating efficiency enables robust evaluation of devices under realistic and transient operating conditions, including interference, modulated signals, and adaptive modulation schemes.

eess.SY↗

arXiv2026

Robust Hybrid Beamforming with Liquid Crystal Antennas and Liquid Neural Networks

Sub-terahertz (sub-THz) multi-user multiple-input multiple-output (MU-MIMO) systems unlock immense bandwidth for 6G wireless communications. However, practical deployment of wireless systems in sub-THz bands faces critical challenges such as increased atmospheric absorption, reduced channel coherence time due to increased Doppler spread at higher carrier frequencies, and hardware bottlenecks as low-loss sub-THz phase shifters are difficult to realize. To overcome the hardware and channel estimation challenges of sub-THz systems, this paper proposes a hybrid beamforming (BF) framework that integrates reconfigurable liquid crystal (LC) antennas with a liquid neural network (LNN) for transmitter. Specifically, we employ an LC antenna as the analog BF stage of a hybrid BF architecture, exploiting its voltage-driven permittivity tunability to achieve high-gain beam steering without the need for lossy phase shifters. For digital BF, we utilize an ordinary differential equations-defined LNN to learn temporal channel dynamics, and use a manifold optimization technique to compress the search space. We validated the proposed method on simulated site-specific 108 GHz ray-tracing channels in an urban scenario using NYURay, a ray-tracing simulator validated against 142 GHz propagation measurements. The 108 GHz carrier frequency matches the operating band of the LC antenna hardware. The proposed method achieves an 88.6\% spectral efficiency (SE) gain and higher robustness to imperfect channel estimation compared to the learning-aided gradient descent and gated recurrent unit machine learning baselines, and 1.9 times higher SE than the 3GPP TR~38.901 standard antenna model, highlighting the potential of LC-based hardware for sub-THz communications.

cs.IT↗

arXiv2026

NYUSIM: A Roadmap to AI-Enabled Statistical Channel Modeling and Simulation

Integrating artificial intelligence (AI) into wireless channel modeling requires large, accurate, and physically consistent datasets derived from real measurements. Such datasets are essential for training and validating models that learn spatio-temporal channel behavior across frequencies and environments. NYUSIM, introduced by NYU WIRELESS in 2016, generates realistic spatio-temporal channel data using extensive outdoor and indoor measurements between 28 and 142 GHz. To improve scalability and support 6G research, we migrated the complete NYUSIM framework from MATLAB to Python, and are incorporating new statistical model generation capabilities from extensive field measurements in the new 6G upper mid-band spectrum at 6.75 GHz (FR1(C)) and 16.95 GHz (FR3) [1]. The NYUSIM Python also incorporates a 3D antenna data format, referred to as Ant3D, which is a standardized, full-sphere format for defining canonical, commercial, or measured antenna patterns for any statistical or site-specific ray tracing modeling tool. Migration from MATLAB to Python was rigorously validated through Kolmogorov-Smirnov (K-S) tests, moment analysis, and end-to-end testing with unified randomness control, confirming statistical consistency and reproduction of spatio-temporal channel statistics, including spatial consistency with the open-source MATLAB NYUSIM v4.0 implementation. The NYUSIM Python version is designed to integrate with modern AI workflows and enable large-scale parallel data generation, establishing a robust, verified, and extensible foundation for future AI-enabled channel modeling.

eess.SP↗

arXiv2026

HoRAMA: Holistic Reconstruction with Automated Material Assignment for Ray Tracing using NYURay

Next-generation wireless networks at upper mid-band and millimeter-wave frequencies require accurate site-specific deterministic channel propagation prediction. Wireless ray tracing (RT) provides site-specific predictions but demands high-fidelity three-dimensional (3D) environment models with material properties. Manual 3D model reconstruction achieves high accuracy but requires weeks of expert effort, creating scalability bottlenecks for large environment reconstruction. Traditional vision-based 3D reconstruction methods lack RT compatibility due to geometrically defective meshes and missing material properties. This paper presents Holistic Reconstruction with Automated Material Assignment (HoRAMA) for wireless propagation prediction using NYURay. HoRAMA generates RT-compatible 3D models from RGB video readily captured using a smartphone or low-cost portable camera, by integrating MASt3R-SLAM dense point cloud generation with vision language model-assisted material assignment. The HoRAMA 3D reconstruction method is verified by comparing NYURay RT predictions, using both manually created and HoRAMA-generated 3D models, against field measurements at 6.75 GHz and 16.95 GHz across 12 TX-RX locations in a 700 square meter factory. HoRAMA ray tracing predictions achieve a 2.28 dB RMSE for matched multipath component (MPC) power predictions, comparable to the manually created 3D model baseline (2.18 dB), while reducing 3D reconstruction time from two months to 16 hours. HoRAMA enables scalable wireless digital twin creation for RT network planning, infrastructure deployment, and beam management in 5G/6G systems, as well as eventual real-time implementation at the edge.

eess.SP↗

arXiv2026

Distributed Uplink Anti-Jamming in LEO Mega-Constellations via Game-Theoretic Beamforming

Low-Earth-Orbit (LEO) satellite constellations have become vital in emerging commercial and defense Non-Terrestrial Networks (NTNs). However, their predictable orbital dynamics and exposed geometries make them highly susceptible to ground-based jamming. Traditional single-satellite interference mitigation techniques struggle to spatially separate desired uplink signals from nearby jammers, even with large antenna arrays. This paper explores a distributed multi-satellite anti-jamming strategy leveraging the dense connectivity and high-speed inter-satellite links of modern LEO mega-constellations. We model the uplink interference scenario as a convex-concave game between a desired terrestrial transmitter and a jammer, each optimizing their spatial covariance matrices to maximize or minimize achievable rate. We propose an efficient min-max solver combining alternating best-response updates with projected gradient descent, achieving fast convergence of the beamforming strategy to the Nash equilibrium. Using realistic Starlink orbital geometries and Sionna ray-tracing simulations, we demonstrate that while close-proximity jammers can cripple single-satellite links, distributed satellite cooperation significantly enhances resilience, shifting the capacity distribution upward under strong interference.

eess.SP↗

arXiv2025

A Framework for Geometry-based Statistical Channel Modeling in ISAC Systems

This paper proposes a comprehensive framework for a {geometry-based statistical model for} integrated sensing and communication (ISAC) tailored for bistatic systems. Our dual-component model decomposes the ISAC channel into a target channel encompassing all multipath components produced by a sensing target {parameterized} by the target's radar cross-section and scattering points, and a background channel comprising all other propagation paths that do not interact with the sensing target. The framework extends TR38.901 via a hybrid clustering approach, integrating spatiotemporally consistent deterministic clusters with stochastic clusters to preserve channel reciprocity and absolute delay alignment for sensing parameter estimation. Extensive simulations across {urban macro, urban micro, and indoor factory} scenarios demonstrate that the model maintains communication performance parity with the standard TR38.901, validated through bit-error rate analysis obtained via simulated and measured ISAC channels and channel capacity assessment, while enabling sensing performance evaluation, such as target ranging error for localization and receiver operating characteristic curves for detection probability.

eess.SP↗

arXiv2025

GSpaRC: Gaussian Splatting for Real-time Reconstruction of RF Channels

Channel state information (CSI) is essential for adaptive beamforming and maintaining robust links in wireless communication systems. However, acquiring CSI incurs significant overhead, consuming up to 25% of spectrum resources in 5G networks due to frequent pilot transmissions at millisecond-scale intervals. Recent approaches aim to reduce this burden by reconstructing CSI from spatiotemporal RF measurements, such as signal strength and direction-of-arrival. While effective in offline settings, these methods often suffer from inference latencies in the 5-100 ms range, making them impractical for real-time systems. We present GSpaRC: Gaussian Splatting for Real-time Reconstruction of RF Channels, a method that achieves accurate channel reconstruction with latency in the low-millisecond regime or below. GSpaRC represents the RF environment using a compact set of 3D Gaussian primitives, each parameterized by a lightweight neural model augmented with physics-informed features such as distance-based attenuation. Unlike traditional vision-based splatting pipelines, GSpaRC is tailored for RF reception: it employs an equirectangular projection onto a hemispherical surface centered at the receiver to reflect omnidirectional antenna behavior. A custom CUDA pipeline enables fully parallelized directional sorting, splatting, and rendering across frequency and spatial dimensions. Evaluated on multiple RF datasets, GSpaRC achieves similar CSI reconstruction fidelity to recent state-of-the-art methods while reducing training and inference time by over an order of magnitude. These results illustrate that modest GPU computation can substantially reduce pilot overhead, making GSpaRC a scalable low-latency approach for channel estimation in 5G and future wireless systems.

cs.LG↗

arXiv2025

Rao-Blackwellized Coverage Estimation in Poisson Networks: A High-Fidelity Hybrid Framework

While stochastic geometry provides a powerful framework for the analysis of cellular networks, standard Monte Carlo simulations often suffer from slow convergence due to the stochasticity of the infinite far-field. This work introduces the \textit{Rao-Blackwellized Hybrid Estimator} (RBHE), which enhances simulation efficiency by analytically marginalizing the residual far-field interference via the conditional Laplace functional. By partitioning the interference field into $K$ dominant interferers and an infinite tail, we derive an estimator that combines exact spatial sampling with a rigorous analytical representation. We prove that the RBHE is an unbiased estimator for any finite truncation, while its systematic bias relative to the infinite-plane benchmark decays at a rate of $\mathcal{O}(K^{1-\eta/2})$. Numerical results demonstrate significant sample parsimony; in the high-reliability regime ($T = -10$ dB) with $K=2$, the RBHE yields a variance reduction gain of $90.75\times$, enabling a $98.90\%$ reduction in the spatial realizations required to reach a target precision. This framework effectively bridges the gap between tractable analytical models and high-fidelity simulations.

cs.IT↗

arXiv2025

Joint Detection, Channel Estimation and Interference Nulling for Terrestrial-Satellite Downlink Co-Existence in the Upper Mid-Band

The upper mid-band FR3 spectrum (7-24 GHz) has garnered significant interest for future cellular services. However, utilizing a large portion of this band requires careful interference coordination with incumbent satellite systems. This paper investigates interference from high-power terrestrial base stations (TN-BSs) to satellite downlink receivers. A central challenge is that the victim receivers, i.e., ground-based non-terrestrial user equipment (NTN-UEs) such as satellite customer premises equipment, must first be detected and their channels estimated before the TN-BS can effectively place nulls in their directions. We explore a potential solution where NTN-UEs periodically transmit preambles or beacon signals that TN-BSs can use for detection and channel estimation. The performance of this nulling approach is analyzed in a simplified scenario with a single victim, revealing the interplay between path loss and estimation quality in determining nulling performance. To further validate the method, we conduct a detailed multi-user site-specific ray-tracing (RT) simulation in a rural environment. The results show that the proposed nulling approach is effective under realistic parameters, even with high densities of victim units, although TN-BS may require a substantial number of antennas.

eess.SY↗

arXiv2025

Compressed Multiband Sensing in FR3 Using Alternating Direction Method of Multipliers

Joint detection and localization of users and scatterers in multipath-rich channels on multiple bands is critical for integrated sensing and communication (ISAC) in 6G. Existing multiband sensing methods are limited by classical beamforming or computationally expensive approaches. This paper introduces alternating direction method of multipliers (ADMM)-assisted compressed multiband sensing (CMS), hereafter referred to as ADMM-CMS, which is a novel framework for multiband sensing using uplink quadrature amplitude modulation-modulated pilot symbols. To solve the CMS problem, we develop an adaptive ADMM algorithm that adjusts to noise and ensures automatic stopping if converged. ADMM combines the decomposability of dual ascent with the robustness of augmented Lagrangian methods, making it suitable for large-scale structured optimization. Simulations show that ADMM-CMS achieves higher spatial resolution and improved denoising compared to Bartlett-type beamforming, yielding a 34 dB gain in per-antenna transmit power for achieving a 0.9 successful recovery probability (SRP). Moreover, compared to performing compressed sensing separately on the constituent 7 GHz and 10 GHz sub-bands, ADMM-CMS achieves reductions in delay root mean squared error of 34.46% and 40.76%, respectively, at -41 dBm per-antenna transmit power, while also yielding improved SRP. Our findings demonstrate ADMM-CMS as an efficient enabler of ISAC in frequency range 3 (FR3, 7-24 GHz) for 6G systems.

eess.SP↗

arXiv2025

Four-Port Probe Stations and SOLR Calibration Standard Design up to 125 GHz on 28 nm CMOS

This paper presents two innovative four-port probe stations developed by FormFactor Incorporated (FFI) and MPI Corporation (MPI), and a four-port calibration standard design up to 125 GHz for the probe stations. True four-port probing at mmWave and beyond does not yet exist, but is anticipated for future multi-band wireless devices using several antennas and RF chains. The four-port probe stations are housed in the THz measurement facility at NYU and allow simultaneous probing from East, West, North, and South orientations, which presents challenges for calibration. An on-chip Short-Open-Load-Reciprocal (SOLR) calibration (cal) standard is designed leveraging UMC's 28 nm CMOS process. S/O/L standard S-parameters are extracted using a virtual multiline Thru-Reflect-Line (mTRL) cal and used to validate SOLR cal performance via simulations up to 125 GHz. The novel probing solutions from MPI and FFI, along with the SOLR cal, open up considerable opportunities for precise RF characterization across wide frequency ranges.

eess.SY↗

arXiv2025

Standardized Machine-Readable Point-Data Format for Consolidating Wireless Propagation Across Environments, Frequencies, and Institutions

The necessity of new spectrum for 6G has intensified global interest in radio propagation measurements across emerging frequency bands, use cases, and antenna types. These measurements are vital for understanding radio channel properties in diverse environments, and involve time-consuming and expensive campaigns. A major challenge for the effective utilization of propagation measurement data has been the lack of a standardized format for reporting and archiving results. Although organizations such as NIST, NGA, and 3GPP have made commendable efforts for data pooling, a unified machine-readable data format for consolidating measurements across different institutions and frequencies remains a missing piece in advancing global standardization efforts. This paper introduces a standardized point-data format for radio propagation measurements and demonstrates how institutions may merge disparate campaigns into a common format. This data format, alongside an environmental map and a measurement summary metadata table, enables integration of data from disparate sources by using a structured representation of key parameters. Here, we show the efficacy of the point-data format standard using data gathered from two independent sub-THz urban microcell (UMi) campaigns: 142 GHz measurements at New York University (NYU) and 145 GHz measurements at the University of Southern California (USC). A joint path loss analysis using the close-in path loss model (1 m ref. distance) yields a refined estimate of the path loss exponent (PLE) employing the proposed standard to pool measurements. Other statistics such as RMS delay spread and angular spread are also determined using a joint point-data table. Adopting this simple, unified format will accelerate channel model development, build multi-institutional datasets, and feed AI/ML applications with reliable training data in a common format from many sources.

eess.SP↗

arXiv2025

Multi-Stage Location Optimization Through Power Delay Profile Alignment Using Site-Specific Wireless Ray Tracing

Ray tracing (RT) simulations require accurate transmitter (TX) and receiver (RX) location information from real-world measurements to accurately characterize wireless propagation behavior in an environment. Such wireless propagation measurements typically employ GPS-based logging for TX/RX locations, which can produce meter-level errors that lead to unreliable RT calibration and validation. These location misalignments cause inaccurate interactions between RT-generated multipath components (MPCs) and the modeled 3D environment, which lead to erroneous channel predictions, and severe discrepancies between simulated and measured power delay profiles (PDPs) and channel characteristics. Moreover, the same RT-generated PDPs using inaccurate locations result in calibration errors when adjusting material properties such as conductivity and permittivity. This paper presents a systematic multi-stage TX/RX location calibration framework to correct location errors and consequently align measured and simulated omnidirectional PDPs. Optimization is performed using a computationally efficient multi-stage grid search and the Powell method. Applying the location calibration framework to NYU WIRELESS urban-microcell (UMi) measurements at 6.75 GHz and 16.95 GHz corrected TX/RX location errors of up to 7 m. The framework reduced the composite loss function by 42.3\% for line-of-sight (LOS) and 13.5\% for non-line-of-sight (NLOS) scenarios. Furthermore, peak power prediction accuracy improved by approximately 1 dB on average. Such improved geometric alignment enables accurate channel prediction, vital for beam management and infrastructure deployment for next-generation wireless networks.

eess.SP↗

arXiv2025

ISAC Imaging by Channel State Information using Ray Tracing for Next Generation 6G

Integrated sensing and communications (ISAC) is emerging as a cornerstone technology for sixth generation (6G) wireless systems, unifying connectivity and environmental mapping through shared hardware, spectrum, and waveforms. The following paper presents an ISAC imaging framework utilizing channel state information (CSI) per-path components, transmitter (TX) positions, and receiver (RX) positions obtained from the calibrated NYURay ray tracer at 6.75 GHz in the upper mid-band. Our work shows how each resolvable multipath component can be extracted from CSI estimation and cast into an equivalent three-dimensional reflection point by fusing its angle and delay information, which is useful and challenging for multi-bounce reflections. The primary contribution of the paper is the two-segment reflection point optimization algorithm, which independently estimates the path lengths from the TX position and RX position to an equivalent reflection point (ERP) on the object surface, thus enabling precise geometric reconstruction. Subsequently, we aggregate the ERPs derived from multiple pairs of TX and RX positions, generating dense three dimensional point clouds representing the objects in the channel. Experimental results validate that the proposed ISAC imaging framework accurately reconstructs object surfaces, edges, and curved features. To the best of our knowledge, this paper provides the first demonstration of multi bounce ISAC imaging using wireless ray tracing at 6.75 GHz.

eess.SP↗

arXiv2025

Site-Specific Location Calibration and Validation of Ray-Tracing Simulator NYURay at Upper Mid-Band Frequencies

Ray-tracing (RT) simulators are essential for wireless digital twins, enabling accurate site-specific radio channel prediction for next-generation wireless systems. Yet, RT simulation accuracy is often limited by insufficient measurement data and a lack of systematic validation. This paper presents site-specific location calibration and validation of NYURay, NYU's in-house ray tracer, at upper mid-band frequencies (6.75 GHz and 16.95 GHz). We propose a location calibration algorithm that corrects GPS-induced position errors by optimizing transmitter-receiver (T-R) locations to align simulated and measured power delay profiles, improving T-R location accuracy by 42.3% for line-of-sight (LOS) and 13.5% for non-line-of-sight (NLOS) scenarios. Validation across 18 T-R locations over distances from 40 to 880 m between transmitter and receiver shows excellent RT accuracy in path loss prediction, with path loss exponent (PLE) deviations under 0.14 when comparing measured versus RT predicted power at all T-R locations. While RT underestimates measured delay spread and angular spreads, their cumulative distributions remain statistically similar. The validated NYURay advances RT validation and provides reliable channel statistics for 6G deployment.

eess.SP↗