arXiv subjects

Tam W. Nguyen

Publications and source records attributed to Tam W. Nguyen.

10 recordsLinked to original sources

arXiv2026

Taylor-Informed Indirect Adaptive Predictive Control Using Jacobian-Frozen Affine Predictors

This paper develops a Taylor-informed indirect adaptive predictive control framework for nonlinear sampled-data systems using Jacobian-frozen affine predictors. A finite Taylor expansion approximates the sampled nonlinear dynamics, and recursive least squares (RLS) identifies its polynomial coefficients online. At each sampling instant, the Jacobian of the identified map is evaluated at the current operating point and frozen over the prediction horizon, yielding an affine predictor for model predictive control. In contrast to generic nonlinear feature dictionaries, the implemented polynomial dictionary is a forward-Euler/Taylor-structure-informed reduced dictionary. Exact joint-odd symmetry eliminates even-total-degree monomials, whereas additional forward-Euler-informed pruning constitutes a deliberate model reduction. Numerical simulations on an unstable nonlinear benchmark compare different Taylor degrees. The results show that higher-order models improve tracking accuracy as the operating point moves farther from the expansion point while maintaining comparable control effort. The complete MATLAB implementation is publicly available to facilitate reproducibility.

eess.SY↗

arXiv2026

Taylor-Informed Predictive Cost Adaptive Control for Quadrotors with Online Gravity-Trim Adaptation

This paper develops Taylor-informed predictive cost adaptive control (PCAC) for quadrotors with online gravity-trim adaptation. First-, second-, and third-order expansions of the nonlinear dynamics about nominal hover define sparse sampled-data dictionaries for row-wise recursive least-squares identification with variable-rate forgetting. At each step, the identified predictor is linearized at the current state, and its Jacobian is fixed over the prediction horizon. The identified vertical dynamics also estimate the vehicle mass and gravity-trim input, eliminating fixed nominal gravity compensation. Simulations with an abrupt payload change and aggressive helix tracking show that the higher-order predictors improve prediction and tracking while preserving the standard PCAC formulation.

eess.SY↗

arXiv2026

Adaptive Behavioral Predictive Control: State-Free Regulation Without Hankel Weights

This paper presents adaptive behavioral predictive control (ABPC), an indirect adaptive predictive control framework operating on streaming data. An LPV--ARX predictor is identified online via kernel--recursive least squares and used to compute closed-form predictive control sequences over a finite horizon, avoiding batch Hankel constructions and iterative optimization. Nonlinear kernel dictionaries extend model expressiveness within a behavioral formulation. Numerical studies on Hammerstein and NARX systems demonstrate effective performance when the dictionary aligns with the plant class and highlight conditioning and feature-selection effects. The paper emphasizes numerical simulation, computational feasibility, and reproducibility.

eess.SY↗

arXiv2025

Fast RLS Identification Leveraging the Linearized System Sparsity: Predictive Cost Adaptive Control for Quadrotors

This paper presents a centralized predictive cost adaptive control (PCAC) strategy for the position and attitude control of quadrotors. PCAC is an optimal, prediction-based control method that uses recursive least squares (RLS) to identify model parameters online, enabling adaptability in dynamic environments. Addressing challenges with black-box approaches in systems with complex couplings and fast dynamics, this study leverages the unique sparsity of quadrotor models linearized around hover points. By identifying only essential parameters related to nonlinear couplings and dynamics, this approach reduces the number of parameters to estimate, accelerates identification, and enhances stability during transients. Furthermore, the proposed control scheme removes the need for an attitude setpoint, typically required in conventional cascaded control designs.

eess.SY↗

arXiv2025

A Predictive Framework for Adversarial Energy Depletion in Inbound Threat Scenarios

This paper presents a predictive framework for adversarial energy-depletion defense against a maneuverable inbound threat (IT). The IT solves a receding-horizon problem to minimize its own energy while reaching a high-value asset (HVA) and avoiding interceptors and static lethal zones modeled by Gaussian barriers. Expendable interceptors (EIs), coordinated by a central node (CN), maintain proximity to the HVA and patrol centers via radius-based tether costs, deny attack corridors by harassing and containing the IT, and commit to intercept only when a geometric feasibility test is confirmed. No explicit opponent-energy term is used, and the formulation is optimization-implementable. No simulations are included.

eess.SY↗

arXiv2024

KPCA for Thrust Vectoring Systems Exhibiting Singular Points

This paper considers a class of thrust vectoring systems, which are nonlinear, overactuated, and time-invariant. We assume that the system is composed of two subsystems and there exist singular points around which the linearized system is uncontrollable. Furthermore, we assume that the system is stabilizable through a two-level control allocation. In this particular setting, we cannot do much with the linearized system, and a direct nonlinear control approach must be used to analyze the system stability. Under adequate assumptions and a suitable nonlinear continuous control-allocation law, we can prove uniform asymptotic convergence of the points of equilibrium using Lyapunov input-to-state stability and the small gain theorem. This control allocation, however, requires the design of an allocated mapping and introduces two exogenous inputs. In particular, the closed-loop system is cascaded, and the output of one subsystem is the disturbance of the other, and vice versa. In general, it is difficult to find a closed-form solution for the allocated mapping; it needs to satisfy restrictive conditions, among which Lipschitz continuity to ensure that the disturbances eventually vanish. Additionally, this mapping is in general nontrivial and non-unique. In this paper, we propose a new kernel-based predictive control allocation to substitute the need for designing an analytic mapping, and assess if it can produce a meaningful mapping ``on-the-fly" by solving online an optimization problem. The simulations include three examples, which are the manipulation of an object through an unmanned aerial vehicle in two and three dimensions, and the control of a surface vessel actuated by two azimuthal thrusters.

eess.SY↗

arXiv2021

Data-Driven Retrospective Cost Adaptive Control for Flight Control Application

Unlike fixed-gain robust control, which trades off performance with modeling uncertainty, direct adaptive control uses partial modeling information for online tuning. The present paper combines retrospective cost adaptive control (RCAC), a direct adaptive control technique for sampled-data systems, with online system identification based on recursive least squares (RLS) with variable-rate forgetting (VRF). The combination of RCAC and RLS-VRF constitutes data-driven RCAC (DDRCAC), where the online system identification is used to construct the target model, which defines the retrospective performance variable. This paper investigates the ability of RLS-VRF to provide the modeling information needed for the target model, especially nonminimum-phase (NMP) zeros. DDRCAC is applied to single-input, single-output (SISO) and multiple-input, multiple-output (MIMO) numerical examples with unknown NMP zeros, as well as several flight control problems, namely, unknown transition from minimum-phase to NMP lateral dynamics, flexible modes, flutter, and nonlinear planar missile dynamics.

eess.SY↗

arXiv2020

Output-Feedback Model Predictive Control with Online Identification

Model predictive control (MPC) is a widely used modern control technique with numerous successful application in diverse areas. Much of this success is due to the ability of MPC to enforce state and control constraints, which are crucial in many applications of control. In order to avoid the need for an observer, output-feedback model predictive control with online identification (OFMPCOI) uses the block observable canonical form whose state consists of past values of the control inputs and measured outputs. Online identification is performed using recursive least squares (RLS) with variable-rate forgetting. The article describes the algorithmic details of OFMPCOI and numerically investigates its performance through a collection of numerical examples that highlight various control challenges, such as model order uncertainty, sensor noise, prediction horizon, stabilization, magnitude and move-size saturation, and stabilization. The numerical examples are used to probe the performance of OFMPCOI in terms of persistency, consistency, and exigency. Since OFMPCOI does not employ a separate control perturbation to enhance persistency, the focus is on self-generated persistency during transient operation. For closed-loop identification using RLS, sensor noise gives rise to bias in the identified model, and the goal is to determine the effect of the lack of consistency. Finally, the numerical examples reveal exigency, which is the extent to which the online identification emphasizes model characteristics that are most relevant to meeting performance objectives.

eess.SY↗

arXiv2019

Technical Note for "A Geodesic Approach for the Control of Tethered Quadrotors"

This technical note focuses on the control of a quadrotor unmanned aerial vehicle (UAV) tethered to the ground. The control objective is to stabilize the UAV to the desired position while ensuring that the cable remains taut at all times. A cascade control scheme is proposed. The inner loop controls the attitude of the UAV. The outer loop gives the attitude reference to the inner loop, and is designed so that (i) the gravity force is compensated, (ii) the cable is taut at all times, and (iii) the trajectory of the UAV follows the geodesic path. To prove asymptotic stability, small gain arguments are used. The control scheme is augmented with a reference governor to enforce constraints.

eess.SY↗

arXiv2018

Proofs of Control of a Quadrotor and a Ground Vehicle Manipulating an Object

This paper focuses on the control of a cooperative system composed of an Unmanned Aerial Vehicle (UAV) and an Unmanned Ground Vehicle (UGV) manipulating an object. The two units are subject to input saturations and collaborate to move the object to a desired pose characterized by its position and inclination. The dynamics are derived using Euler-Lagrange method. A pre-stabilizing control law is proposed where the UGV is tasked to deploy the object to a certain position whereas the UAV adjusts its inclination. In particular, a proportional-derivative control law is proposed for the UGV, and a cascade control approach is used for the UAV, where the inner loop controls the attitude of the UAV and the outer loop stabilizes the inclination of the object. Then, we prove the stability of the points of equilibrium using small gain arguments. To ensure constraints satisfaction at all times, a reference governor unit is added to the pre-stabilizing control scheme. Finally, numerical results combined with experimental results are provided to validate the effectiveness of the proposed control scheme in practice.

cs.RO↗