arXiv subjects

Takamitsu Matsubara

Publications and source records attributed to Takamitsu Matsubara.

At least 19 recordsLinked to original sources

arXiv2026

Bridged SBI: Correcting Biased Low-Fidelity Posteriors for Cost-Efficient High-Fidelity Inference

Accurate calibration of particle-based simulators is crucial for robotic earthwork simulation, but analytical calibration is challenging due to this task's highly nonlinear particle dynamics and the black-box nature of conventional simulators. Although simulation-based inference (SBI) can estimate posterior distributions over simulation parameters solely from forward simulations, applying SBI directly to high-fidelity (HF) particle simulators is often computationally prohibitive. Low-fidelity (LF) simulators with coarser particles can reduce this cost, but changes in particle size and particle count shift the parameter values needed to reproduce the same observation, producing biased LF posteriors. We propose Bridged SBI, which leverages a biased but informative LF posterior to guide HF inference. This method first uses inexpensive LF simulations to identify a coarse high-density parameter region, and then it learns a local residual bridge to transport LF posterior samples toward HF-consistent regions by correcting the LF--HF discrepancy. We analyze how sequential multi-fidelity SBI (Naive-MF) can suffer from LF-induced posterior miscoverage when it directly relies on the LF posterior without discrepancy correction. We then show that Bridged SBI is designed to alleviate this issue by explicitly modeling the LF--HF discrepancy through residual correction. Experiments on both sim-to-sim particle-parameter calibration and real-to-sim calibration with real soil observation show that Bridged SBI produces more accurate and reliable HF posteriors than HF-only SBI or the Naive-MF baseline, especially under limited HF simulation costs.

cs.RO↗

arXiv2026

Autonomous Obstacle Removal for Excavators through Policy Learning with Particle Simulation

Autonomous obstacle removal from the ground is an important earthwork task, but this is difficult to automate because an excavator must adapt its excavation trajectories over repeated cycles as soil-obstacle conditions change. Learning such state-dependent behavior requires a training environment that reproduces accumulated soil-obstacle interactions, including contact states, terrain deformation, and obstacle visibility. Accordingly, particle-based simulation is suitable for the relevant policy learning. However, particle simulation is computationally expensive, and repeated excavation cycles further increase the learning cost. We observe that the burial condition of an obstacle governs both task difficulty and simulation cost: deeper burial makes obstacle removal harder while also requiring more particles for accurate simulation. This observation motivates a burial-conditioned curriculum learning strategy. We propose a time-efficient sim-to-real policy learning framework in which the policy observes terrain and obstacle information from RGB-D measurements and then outputs a parameterized excavation trajectory; in this process, the simulator reproduces in a real-world excavator the same observation-action interface it uses under controllable burial conditions. The curriculum begins with shallow burial conditions and progressively increases burial depth while adjusting particle count, thus simultaneously controlling task difficulty and simulation cost. Experiments show that the proposed framework successfully learns an effective obstacle-removal policy, whereas baseline methods fail even after a full week of training. The proposed curriculum achieves effective performance within three days and achieves successful transfer to a real 12-ton excavator operating on open ground with various steel obstacles, thus demonstrating robust obstacle removal.

cs.RO↗

arXiv2026

DecompGrind: A Decomposition Framework for Robotic Grinding via Cutting-Surface Planning and Contact-Force Adaptation

Robotic grinding is widely used for shaping workpieces in manufacturing, but it remains difficult to automate this process efficiently. In particular, efficiently grinding workpieces of different shapes and material hardness is challenging because removal resistance varies with local contact conditions. Moreover, it is difficult to achieve accurate estimation of removal resistance and analytical modeling of shape transition, and learning-based approaches often require large amounts of training data to cover diverse processing conditions. To address these challenges, we decompose robotic grinding into two components: removal-shape planning and contact-force adaptation. Based on this formulation, we propose DecompGrind, a framework that combines Global Cutting-Surface Planning (GCSP) and Local Contact-Force Adaptation (LCFA). GCSP determines removal shapes through geometric analysis of the current and target shapes without learning, while LCFA learns a contact-force adaptation policy using bilateral control-based imitation learning during the grinding of each removal shape. This decomposition restricts learning to local contact-force adaptation, allowing the policy to be learned from a small number of demonstrations, while handling global shape transition geometrically. Experiments using a robotic grinding system and 3D-printed workpieces demonstrate efficient robotic grinding of workpieces having different shapes and material hardness while maintaining safe levels of contact force.

cs.RO↗

arXiv2026

ViSA: Visited-State Augmentation for Generalized Goal-Space Contrastive Reinforcement Learning

Goal-Conditioned Reinforcement Learning (GCRL) is a framework for learning a policy that can reach arbitrarily given goals. In particular, Contrastive Reinforcement Learning (CRL) provides a framework for policy updates using an approximation of the value function estimated via contrastive learning, achieving higher sample efficiency compared to conventional methods. However, since CRL treats the visited state as a pseudo-goal during learning, it can accurately estimate the value function only for limited goals. To address this issue, we propose a novel data augmentation approach for CRL called ViSA (Visited-State Augmentation). ViSA consists of two components: 1) generating augmented state samples, with the aim of augmenting hard-to-visit state samples during on-policy exploration, and 2) learning consistent embedding space, which uses an augmented state as auxiliary information to regularize the embedding space by reformulating the objective function of the embedding space based on mutual information. We evaluate ViSA in simulation and real-world robotic tasks and show improved goal-space generalization, which permits accurate value estimation for hard-to-visit goals. Further details can be found on the project page: https://issa-n.github.io/projectPage_ViSA/

cs.RO↗

arXiv2026

Robust Sim-to-Real Cloth Untangling through Reduced-Resolution Observations via Adaptive Force-Difference Quantization

Robotic cloth untangling requires progressively disentangling fabric by adapting pulling actions to changing contact and tension conditions. Because large-scale real-world training is impractical due to cloth damage and hardware wear, sim-to-real policy transfer is a promising solution. However, cloth manipulation is highly sensitive to interaction dynamics, and policies that depend on precise force magnitudes often fail after transfer because similar force responses cannot be reproduced due to the reality gap. We observe that untangling is largely characterized by qualitative tension transitions rather than exact force values. This indicates that directly minimizing the sim-to-real gap in raw force measurements does not necessarily align with the task structure. We therefore hypothesize that emphasizing coarse force-change patterns while suppressing fine environment-dependent variations can improve robustness of sim-to-real transfer. Based on this insight, we propose Adaptive Force-Difference Quantization (ADQ), which reduces observation resolution by representing force inputs as discretized temporal differences and learning state-dependent quantization thresholds adaptively. This representation mitigates overfitting to environment-specific force characteristics and facilitates direct sim-to-real transfer. Experiments in both simulation and real-world cloth untangling demonstrate that ADQ achieves higher success rates and exhibits greater robustness in sim-to-real transfer than policies using raw force inputs. Supplementary video is available at https://youtu.be/ZeoBs-t0AWc

cs.RO↗

arXiv2026

DeReCo: Decoupling Representation and Coordination Learning for Object-Adaptive Decentralized Multi-Robot Cooperative Transport

Generalizing decentralized multi-robot cooperative transport across objects with diverse shapes and physical properties remains a fundamental challenge. Under decentralized execution, two key challenges arise: object-dependent representation learning under partial observability and coordination learning in multi-agent reinforcement learning (MARL) under non-stationarity. A typical approach jointly optimizes object-dependent representations and coordinated policies in an end-to-end manner while randomizing object shapes and physical properties during training. However, this joint optimization tightly couples representation and coordination learning, introducing bidirectional interference: inaccurate representations under partial observability destabilize coordination learning, while non-stationarity in MARL further degrades representation learning, resulting in sample-inefficient training. To address this structural coupling, we propose DeReCo, a novel MARL framework that decouples representation and coordination learning for object-adaptive multi-robot cooperative transport, improving sample efficiency and generalization across objects and transport scenarios. DeReCo adopts a three-stage training strategy: (1) centralized coordination learning with privileged object information, (2) reconstruction of object-dependent representations from local observations, and (3) progressive removal of privileged information for decentralized execution. This decoupling mitigates interference between representation and coordination learning and enables stable and sample-efficient training. Experimental results show that DeReCo outperforms baselines in simulation on three training objects, generalizes to six unseen objects with varying masses and friction coefficients, and achieves superior performance on two unseen objects in real-robot experiments.

cs.RO↗

arXiv2026

Task-Relevant and Irrelevant Region-Aware Augmentation for Generalizable Vision-Based Imitation Learning in Agricultural Manipulation

Vision-based imitation learning has shown promise for robotic manipulation; however, its generalization remains limited in practical agricultural tasks. This limitation stems from scarce demonstration data and substantial visual domain gaps caused by i) crop-specific appearance diversity and ii) background variations. To address this limitation, we propose Dual-Region Augmentation for Imitation Learning (DRAIL), a region-aware augmentation framework designed for generalizable vision-based imitation learning in agricultural manipulation. DRAIL explicitly separates visual observations into task-relevant and task-irrelevant regions. The task-relevant region is augmented in a domain-knowledge-driven manner to preserve essential visual characteristics, while the task-irrelevant region is aggressively randomized to suppress spurious background correlations. By jointly handling both sources of visual variation, DRAIL promotes learning policies that rely on task-essential features rather than incidental visual cues. We evaluate DRAIL on diffusion policy-based visuomotor controllers through robot experiments on artificial vegetable harvesting and real lettuce defective leaf picking preparation tasks. The results show consistent improvements in success rates under unseen visual conditions compared to baseline methods. Further attention analysis and representation generalization metrics indicate that the learned policies rely more on task-essential visual features, resulting in enhanced robustness and generalization.

cs.RO↗

arXiv2026

VoxelDiffusionCut: Non-destructive Internal-part Extraction via Iterative Cutting and Structure Estimation

Non-destructive extraction of the target internal part, such as batteries and motors, by cutting surrounding structures is crucial at recycling and disposal sites. However, the diversity of products and the lack of information on disassembly procedures make it challenging to decide where to cut. This study explores a method for non-destructive extraction of a target internal part that iteratively estimates the internal structure from observed cutting surfaces and formulates cutting plans based on the estimation results. A key requirement is to estimate the probability of the target part's presence from partial observations. However, learning conditional generative models for this task is challenging: The high dimensionality of 3D shape representations makes learning difficult, and conventional models (e.g., conditional variational autoencoders) often fail to capture multi-modal predictive uncertainty due to mode collapse, resulting in overconfident predictions. To address these issues, we propose VoxelDiffusionCut, which iteratively estimates the internal structure represented as voxels using a diffusion model and plans cuts for non-destructive extraction of the target internal part based on the estimation results. Voxel representation allows the model to predict only attributes at fixed grid positions, i.e., types of constituent parts, making learning more tractable. The diffusion model completes the voxel representation conditioned on observed cutting surfaces, capturing uncertainty in unobserved regions to avoid erroneous cuts. Experimental results in simulation suggest that the proposed method can estimate internal structures from observed cutting surfaces and enable non-destructive extraction of the target internal part by leveraging the estimated uncertainty.

cs.CV↗

arXiv2026

Feasibility-aware Imitation Learning from Observation with Multimodal Feedback

Imitation learning frameworks that learn robot control policies from demonstrators' motions via hand-mounted demonstration interfaces have attracted increasing attention. However, due to differences in physical characteristics between demonstrators and robots, this approach faces two limitations: i) the demonstration data do not include robot actions, and ii) the demonstrated motions may be infeasible for robots. These limitations make policy learning difficult. To address them, we propose Feasibility-Aware Behavior Cloning from Observation (FABCO). FABCO integrates behavior cloning from observation, which complements robot actions using robot dynamics models, with feasibility estimation. In feasibility estimation, the demonstrated motions are evaluated using a robot-dynamics model, learned from the robot's execution data, to assess reproducibility under the robot's dynamics. The estimated feasibility is used for multimodal feedback and feasibility-aware policy learning to improve the demonstrator's motions and learn robust policies. Multimodal feedback provides feasibility through the demonstrator's visual and haptic senses to promote feasible demonstrated motions. Feasibility-aware policy learning reduces the influence of demonstrated motions that are infeasible for robots, enabling the learning of policies that robots can execute stably. We conducted experiments with 15 participants on two tasks and confirmed that FABCO improves imitation learning performance by more than 3.2 times compared to the case without feasibility feedback.

cs.RO↗

arXiv2026

CoLF: Learning Consistent Leader-Follower Policies for Vision-Language-Guided Multi-Robot Cooperative Transport

In this study, we address vision-language-guided multi-robot cooperative transport, where each robot grounds natural-language instructions from onboard camera observations. A key challenge in this decentralized setting is perceptual misalignment across robots, where viewpoint differences and language ambiguity can yield inconsistent interpretations and degrade cooperative transport. To mitigate this problem, we adopt a dependent leader-follower design, where one robot serves as the leader and the other as the follower. Although such a leader-follower structure appears straightforward, learning with independent and symmetric agents often yields symmetric or unstable behaviors without explicit inductive biases. To address this challenge, we propose Consistent Leader-Follower (CoLF), a multi-agent reinforcement learning (MARL) framework for stable leader-follower role differentiation. CoLF consists of two key components: (1) an asymmetric policy design that induces leader-follower role differentiation, and (2) a mutual-information-based training objective that maximizes a variational lower bound, encouraging the follower to predict the leader's action from its local observation. The leader and follower policies are jointly optimized under the centralized training and decentralized execution (CTDE) framework to balance task execution and consistent cooperative behaviors. We validate CoLF in both simulation and real-robot experiments using two quadruped robots. The demonstration video is available at https://sites.google.com/view/colf/.

cs.RO↗

arXiv2025

DISF: Disentangled Iterative Surface Fitting for Contact-stable Grasp Planning with Grasp Pose Alignment to the Object Center of Mass

In this work, we address the limitation of surface fitting-based grasp planning algorithm, which primarily focuses on geometric alignment between the gripper and object surface while overlooking the stability of contact point distribution, often resulting in unstable grasps due to inadequate contact configurations. To overcome this limitation, we propose a novel surface fitting algorithm that integrates contact stability while preserving geometric compatibility. Inspired by human grasping behavior, our method disentangles the grasp pose optimization into three sequential steps: (1) rotation optimization to align contact normals, (2) translation refinement to improve the alignment between the gripper frame origin and the object Center of Mass (CoM), and (3) gripper aperture adjustment to optimize contact point distribution. We validate our approach in simulation across 15 objects under both Known-shape (with clean CAD-derived dataset) and Observed-shape (with YCB object dataset) settings, including cross-platform grasp execution on three robot--gripper platforms. We further validate the method in real-world grasp experiments on a UR3e robot. Overall, DISF reduces CoM misalignment while maintaining geometric compatibility, translating into higher grasp success in both simulation and real-world execution compared to baselines. Additional videos and supplementary results are available on our project page: https://tomoya-yamanokuchi.github.io/disf-ras-project-page/

cs.RO↗

arXiv2025

Tracing Energy Flow: Learning Tactile-based Grasping Force Control to Reduce Slippage in Dynamic Object Interaction

Regulating grasping force to reduce slippage during dynamic object interaction remains a fundamental challenge in robotic manipulation, especially when objects are manipulated by multiple rolling contacts, have unknown properties (such as mass or surface conditions), and when external sensing is unreliable. In contrast, humans can quickly regulate grasping force by touch, even without visual cues. Inspired by this ability, we aim to enable robotic hands to rapidly explore objects and learn tactile-driven grasping force control under motion and limited sensing. We propose a physics-informed energy abstraction that models the object as a virtual energy container. The inconsistency between the fingers' applied power and the object's retained energy provides a physically grounded signal for inferring slip-aware stability. Building on this abstraction, we employ model-based learning and planning to efficiently model energy dynamics from tactile sensing and perform real-time grasping force optimization. Experiments in both simulation and hardware demonstrate that our method can learn grasping force control from scratch within minutes, effectively reduce slippage, and extend grasp duration across diverse motion-object pairs, all without relying on external sensing or prior object knowledge. (Video: https://youtu.be/l3TJV29Mo6w)

cs.RO↗

arXiv2025

ASBI: Leveraging Informative Real-World Data for Active Black-Box Simulator Tuning

Black-box simulators are widely used in robotics, but optimizing their parameters remains challenging due to inaccessible likelihoods. Simulation-Based Inference (SBI) tackles this issue using simulation-driven approaches, estimating the posterior from offline real observations and forward simulations. However, in black-box scenarios, preparing observations that contain sufficient information for parameter estimation is difficult due to the unknown relationship between parameters and observations. In this work, we present Active Simulation-Based Inference (ASBI), a parameter estimation framework that uses robots to actively collect real-world online data to achieve accurate black-box simulator tuning. Our framework optimizes robot actions to collect informative observations by maximizing information gain, which is defined as the expected reduction in Shannon entropy between the posterior and the prior. While calculating information gain requires the likelihood, which is inaccessible in black-box simulators, our method solves this problem by leveraging Neural Posterior Estimation (NPE), which leverages a neural network to learn the posterior estimator. Three simulation experiments quantitatively verify that our method achieves accurate parameter estimation, with posteriors sharply concentrated around the true parameters. Moreover, we show a practical application using a real robot to estimate the simulation parameters of cubic particles corresponding to two real objects, beads and gravel, with a bucket pouring action.

cs.RO↗

arXiv2025

OIPP: Object-Adaptive Impact Point Predictor for Catching Diverse In-Flight Objects

In this study, we address the problem of in-flight object catching using a quadruped robot with a basket. Our objective is to accurately predict the impact point, defined as the object's landing position. This task poses two key challenges: the absence of public datasets capturing diverse objects under unsteady aerodynamics, which are essential for training reliable predictors; and the difficulty of accurate early-stage impact point prediction when trajectories appear similar across objects. To overcome these issues, we construct a real-world dataset of 8,000 trajectories from 20 objects, providing a foundation for advancing in-flight object catching under complex aerodynamics. We then propose the Object-Adaptive Impact Point Predictor (OIPP), consisting of two modules: (i) an Object-Adaptive Encoder (OAE) that extracts object-dependent representations from motion histories, and (ii) an Impact Point Predictor (IPP) that estimates the impact point from these representations. Two IPP variants are implemented: a Neural Acceleration Estimator (NAE)-based method that predicts trajectories and derives the impact point, and a Direct Point Estimator (DPE)-based method that directly outputs it. Experimental results show that our dataset is more diverse and complex than existing datasets, and that our method outperforms baselines on both 15 seen and 5 unseen objects. Furthermore, we show that improved early-stage prediction enhances catching success in simulation and demonstrate the effectiveness of our approach through real-robot experiments. The demonstration is available at https://sites.google.com/view/robot-catching-2025.

cs.RO↗

arXiv2025

Prolonging Tool Life: Learning Skillful Use of General-purpose Tools through Lifespan-guided Reinforcement Learning

In inaccessible environments with uncertain task demands, robots often rely on general-purpose tools that lack predefined usage strategies. These tools are not tailored for particular operations, making their longevity highly sensitive to how they are used. This creates a fundamental challenge: how can a robot learn a tool-use policy that both completes the task and prolongs the tool's lifespan? In this work, we address this challenge by introducing a reinforcement learning (RL) framework that incorporates tool lifespan as a factor during policy optimization. Our framework leverages Finite Element Analysis (FEA) and Miner's Rule to estimate Remaining Useful Life (RUL) based on accumulated stress, and integrates the RUL into the RL reward to guide policy learning toward lifespan-guided behavior. To handle the fact that RUL can only be estimated after task execution, we introduce an Adaptive Reward Normalization (ARN) mechanism that dynamically adjusts reward scaling based on estimated RULs, ensuring stable learning signals. We validate our method across simulated and real-world tool use tasks, including Object-Moving and Door-Opening with multiple general-purpose tools. The learned policies consistently prolong tool lifespan (up to 8.01x in simulation) and transfer effectively to real-world settings, demonstrating the practical value of learning lifespan-guided tool use strategies.

cs.RO↗

arXiv2025

Robotic System for Chemical Experiment Automation with Dual Demonstration of End-effector and Jig Operations

While robotic automation has demonstrated remarkable performance, such as executing hundreds of experiments continuously over several days, designing synchronized motions between the robot and experimental jigs remains challenging, especially for flexible experimental automation. This challenge stems from the fact that even minor changes in experimental conditions often require extensive reprogramming of both robot motions and jig control commands. Previous systems lack the flexibility to accommodate frequent updates, limiting their practical utility in actual laboratories. To update robotic automation systems flexibly by chemists, we propose a concept that enables the automation of experiments by utilizing dual demonstrations of robot motions and jig operations by chemists. To verify this concept, we developed a chemical-experiment-automation system consisting of jigs to assist the robot in experiments, a motion-demonstration interface, a jig-control interface, and a mobile manipulator. We validate the concept through polymer-synthesis experiments, focusing on critical liquid-handling tasks such as pipetting and dilution. The experimental results indicate high reproducibility of the demonstrated motions and robust task-success rates. This comprehensive concept not only simplifies the robot programming process for chemists but also provides a flexible and efficient solution to accommodate a wide range of experimental conditions, providing a practical framework for intuitive and adaptable robotic laboratory automation. Our project page is available at: https://sasakihikaru.github.io/Chemical-Experiment-Automation-with-Dual-Demonstration/.

cs.RO↗

arXiv2025

Where Do Humans Look When Demonstrating to Robots? Human Gaze Behavior in Pick-and-Place Tasks Across Demonstration Devices

Imitation learning for generalizable performance often requires a large volume of demonstration data, making the process significantly costly. One promising strategy to address this challenge is to leverage the cognitive skills of human demonstrators with strong generalization capability, particularly by revealing the underlying task demands reflected in their gaze behavior. However, imitation learning typically involves humans collecting data using demonstration devices that emulate a robot's embodiment and visual condition. This raises the question of how such devices influence gaze behavior. We propose an experimental framework that systematically analyzes human demonstrators' gaze behavior across a spectrum of robot-emulating demonstration devices. Our experimental results show that certain device properties shift gaze from task-goal cues (e.g., objects) toward control-monitoring cues (e.g., the end-effector). Furthermore, these shifts directly affect the performance of typical gaze-based imitation learning models, sometimes degrading it below non-gaze baselines.

cs.RO↗

arXiv2025

DAPPER: Discriminability-Aware Policy-to-Policy Preference-Based Reinforcement Learning for Query-Efficient Robot Skill Acquisition

Preference-based Reinforcement Learning (PbRL) enables policy learning through simple queries comparing trajectories from a single policy. While human responses to these queries make it possible to learn policies aligned with human preferences, PbRL suffers from low query efficiency, as policy bias limits trajectory diversity and reduces the number of discriminable queries available for learning preferences. This paper identifies preference discriminability, which quantifies how easily a human can judge which trajectory is closer to their ideal behavior, as a key metric for improving query efficiency. To address this, we move beyond comparisons within a single policy and instead generate queries by comparing trajectories from multiple policies, as training them from scratch promotes diversity without policy bias. We propose Discriminability-Aware Policy-to-Policy Preference-Based Efficient Reinforcement Learning (DAPPER), which integrates preference discriminability with trajectory diversification achieved by multiple policies. DAPPER trains new policies from scratch after each reward update and employs a discriminator that learns to estimate preference discriminability, enabling the prioritized sampling of more discriminable queries. During training, it jointly maximizes the preference reward and preference discriminability score, encouraging the discovery of highly rewarding and easily distinguishable policies. Experiments in simulated and real-world legged robot environments demonstrate that DAPPER outperforms previous methods in query efficiency, particularly under challenging preference discriminability conditions. A supplementary video that facilitates understanding of the proposed framework and its experimental results is available at: https://youtu.be/lRwX8FNN8n4

cs.RO↗