arXiv subjects

Taesoo Kwon

Publications and source records attributed to Taesoo Kwon.

7 recordsLinked to original sources

arXiv2026

Unified Motion Retargeting for Humanoids with Learned Point Cloud Correspondence

Humanoid learning increasingly relies on transforming vast and diverse human motion data into high-quality robot reference trajectories. However, retargeting human motion to humanoid robots is challenging due to substantial differences in morphology, degrees of freedom, joint ranges, and kinematic constraints between humans and robots. Existing retargeting methods typically address these differences by defining human-robot correspondence through hand-crafted sparse keypoints or body-part pairs. As a result, retargeting quality depends heavily on manual semantic design, limiting scalability across motion sources and robot morphologies and providing only sparse guidance for reproducing detailed poses and interactions. In this paper, we present Unified Motion Retargeting (UMR), a framework that learns dense point cloud correspondence without requiring manually designed human-robot mappings. By treating exterior point clouds as a unified interface between human motion and humanoid robots, UMR decouples retargeting from source-specific skeletal semantics and robot-specific topology. The learned dense correspondence provides fine-grained geometric anchors for constrained point cloud matching optimization, enabling surface-level pose alignment and direct transfer of interaction contacts. Experiments demonstrate that UMR unifies retargeting across heterogeneous motion sources, robot embodiments, and downstream scenarios ranging from locomotion to interaction, while achieving higher motion fidelity and plausibility than state-of-the-art methods. UMR therefore provides a scalable foundation for transforming large-scale human motion references into robot-ready training data.

cs.RO↗

arXiv2024

Utilizing Motion Matching with Deep Reinforcement Learning for Target Location Tasks

We present an approach using deep reinforcement learning (DRL) to directly generate motion matching queries for long-term tasks, particularly targeting the reaching of specific locations. By integrating motion matching and DRL, our method demonstrates the rapid learning of policies for target location tasks within minutes on a standard desktop, employing a simple reward design. Additionally, we propose a unique hit reward and obstacle curriculum scheme to enhance policy learning in environments with moving obstacles.

cs.GR↗

arXiv2024

Performance-Based Biped Control using a Consumer Depth Camera

We present a technique for controlling physically simulated characters using user inputs from an off-the-shelf depth camera. Our controller takes a real-time stream of user poses as input, and simulates a stream of target poses of a biped based on it. The simulated biped mimics the user's actions while moving forward at a modest speed and maintaining balance. The controller is parameterized over a set of modulated reference motions that aims to cover the range of possible user actions. For real-time simulation, the best set of control parameters for the current input pose is chosen from the parameterized sets of pre-computed control parameters via a regression method. By applying the chosen parameters at each moment, the simulated biped can imitate a range of user actions while walking in various interactive scenarios.

cs.GR↗

arXiv2023

Adaptive Tracking of a Single-Rigid-Body Character in Various Environments

Since the introduction of DeepMimic [Peng et al. 2018], subsequent research has focused on expanding the repertoire of simulated motions across various scenarios. In this study, we propose an alternative approach for this goal, a deep reinforcement learning method based on the simulation of a single-rigid-body character. Using the centroidal dynamics model (CDM) to express the full-body character as a single rigid body (SRB) and training a policy to track a reference motion, we can obtain a policy that is capable of adapting to various unobserved environmental changes and controller transitions without requiring any additional learning. Due to the reduced dimension of state and action space, the learning process is sample-efficient. The final full-body motion is kinematically generated in a physically plausible way, based on the state of the simulated SRB character. The SRB simulation is formulated as a quadratic programming (QP) problem, and the policy outputs an action that allows the SRB character to follow the reference motion. We demonstrate that our policy, efficiently trained within 30 minutes on an ultraportable laptop, has the ability to cope with environments that have not been experienced during learning, such as running on uneven terrain or pushing a box, and transitions between learned policies, without any additional learning.

cs.RO↗

arXiv2014

Spatial Performance Analysis and Design Principles for Wireless Peer Discovery

In wireless peer-to-peer networks that serve various proximity-based applications, peer discovery is the key to identifying other peers with which a peer can communicate and an understanding of its performance is fundamental to the design of an efficient discovery operation. This paper analyzes the performance of wireless peer discovery through comprehensively considering the wireless channel, spatial distribution of peers, and discovery operation parameters. The average numbers of successfully discovered peers are expressed in closed forms for two widely used channel models, i.e., the interference limited Nakagami-m fading model and the Rayleigh fading model with nonzero noise, when peers are spatially distributed according to a homogeneous Poisson point process. These insightful expressions lead to the design principles for the key operation parameters including the transmission probability, required amount of wireless resources, level of modulation and coding scheme (MCS), and transmit power. Furthermore, the impact of shadowing on the spatial performance and suggested design principles is evaluated using mathematical analysis and simulations.

cs.IT↗

arXiv2014

Spatial Topology Adjustment for Minimizing Multicell Network Power Consumption

While the deployment of base stations (BSs) becomes increasingly dense in order to accommodate the growth in traffic demand, these BSs may be under-utilized during most hours except peak hours. Accordingly, the deactivation of these under-utilized BSs is regarded as the key to reducing network power consumption; however, the remaining active BSs should increase their transmit power in order to fill network coverage holes that result from BS switching off. This paper investigates the optimal balance between such beneficial and harmful effects of BS switching off in terms of minimizing the network power consumption, through comprehensively considering the spatial BS distribution, BS transmit power, BS power consumption behaviors, radio propagation environments, and frequency reuse. When BSs are deployed according to a homogeneous Poisson point process, the suboptimal and approximated design problems are formulated as geometric programming and the solutions lead to insightful design principles for the key design parameters including the spatial density, transmit power, and frequency reuse of remaining active BSs. The numerical results demonstrate that these solutions are very close to the optimal balances.

cs.IT↗

arXiv2011

Random Deployment of Data Collectors for Serving Randomly-Located Sensors

Recently, wireless communication industries have begun to extend their services to machine-type communication devices as well as to user equipments. Such machine-type communication devices as meters and sensors need intermittent uplink resources to report measured or sensed data to their serving data collector. It is however hard to dedicate limited uplink resources to each of them. Thus, efficient service of a tremendous number of devices with low activities may consider simple random access as a solution. The data collectors receiving the measured data from many sensors simultaneously can successfully decode only signals with signal-to-interference-plus-noise-ratio (SINR) above a certain value. The main design issues for this environment become how many data collectors are needed, how much power sensor nodes transmit with, and how wireless channels affect the performance. This paper provides answers to those questions through a stochastic analysis based on a spatial point process and on simulations.

cs.NI↗